Fetching data from 2 logical Fact

Hi All,
I have 2 facts having same level of granularity and joined to Customer dimension.Now i need to fetch the data from both these facts and dimension.But when i m dropping the columns from these facts and dimension i am getting error.These 2 facts are modeled as different LT in BMM layer.
Please guide.

Hi Kishore,
Thanks for the reply.Yes it is confirmed dimension which is Customer.I have 2 facts one is sales fact and one marketing fact.Now i want to display a report containing columns from both facts and dimension.
and also maintain the lowest level granularity for both LT.
Please help.
Edited by: user11204020 on Oct 5, 2010 11:37 PM

Similar Messages

Filters on non-conforming dimensions when fetching data from multiple facts

Hi,
I would like to confirm my understanding about how OBI fetches data from multiple facts. I have set up the BMM layer. Through Answers I am getting data from multiple facts as expected. However, is it necessary to base filters only on the conforming dimensions? If I do so, I am getting the correct data. But if I filter data on non-conforming dimensions, then I am getting more data which I am not expecting.
Suppose, Fact1, Fact2 and Fact3 share a CommonDim dimension. If I have a filter on CommonDim, then the filter is used on the three fact tables. However, if I filter data based on Fact1's DimTwo which is not shared by Fact2 and Fact3 and I have measurements from all the fact tables, then from the SQL generated, it seems that OBI is fecting all data from Fact2 and Fact3 and data from Fact1 where DimTwo = 'SomeValue'. Then it seems to be merging the data from the three result sets.
Is this expected, esp. a scenario where a filter is based on a non-conforming dimension (DimTwo in the example)? Have I missed anything? What do I need to do, if I want to return rows from Fact1 based on DimTwo's filter and then if there is data on Fact2 and Fact3 based on the value in CommonDim corresponding to DimTwo's filter?
Please let me know.
Thanks and regards,
Manoj.
PS.: I have got a link now which is http://obibb.wordpress.com/2010/06/06/multiple-fact-reporting-on-non-conforming-dimensions-part-ii/
Edited by: mandix on 25-Oct-2011 12:01

Hi
The problem you describe is similar to mine (I wrote several threads ago).
That is, if there is a non-conformed dimension in a report then the column from the fact table which is not connected with those non-conformed dimensions containes zeros or blanks.
Was this problem solved? I didn't quite catch one of previuos messages... If you can please repeat it more detailed.
What I tried to do is to set Total level in the Content tab (LTS properties). In this example - I could set Total level to JOBS in the plan type dimension. But it didn't help.
So if you know what to do then please describe it here...

Error while fetching data from Logical data base

Hi All,
I need to fetch the data from Logical data base DDF.First when i am trying demo code
REPORT demo_program_read_tables_2.
NODES: spfli, sflight.
GET spfli FIELDS carrid connid cityfrom cityto.
WRITE: / spfli-carrid,
           spfli-connid,
           spfli-cityfrom,
           spfli-cityto.
GET sflight FIELDS fldate.
WRITE: / sflight-fldate.
I am getting error like ""spfli is not a node of the logical data base __S""
Should i declare anything esle?
Madhu

REPORT demo_logical_database.
DATA wa_spfli TYPE spfli.
SELECT-OPTIONS s_carr FOR wa_spfli-carrid.
DATA: callback TYPE TABLE OF ldbcb,
      callback_wa LIKE LINE OF callback.
DATA: seltab TYPE TABLE OF rsparams,
      seltab_wa LIKE LINE OF seltab.
callback_wa-ldbnode     = 'SPFLI'.
callback_wa-get         = 'X'.
callback_wa-get_late    = 'X'.
callback_wa-cb_prog     = sy-repid.
callback_wa-cb_form     = 'CALLBACK_SPFLI'.
APPEND callback_wa TO callback.
CLEAR callback_wa.
callback_wa-ldbnode     = 'SFLIGHT'.
callback_wa-get         = 'X'.
callback_wa-cb_prog     = sy-repid.
callback_wa-cb_form     = 'CALLBACK_SFLIGHT'.
APPEND callback_wa TO callback.
seltab_wa-kind = 'S'.
seltab_wa-selname = 'CARRID'.
LOOP AT s_carr.
MOVE-CORRESPONDING s_carr TO seltab_wa.
APPEND seltab_wa TO seltab.
ENDLOOP.
CALL FUNCTION 'LDB_PROCESS'
     EXPORTING
          ldbname                     = 'F1S'
          variant                     = ' '
     TABLES
          callback                    = callback
          selections                  = seltab
     EXCEPTIONS
          ldb_not_reentrant           = 1
          ldb_incorrect               = 2
          ldb_already_running         = 3
          ldb_error                   = 4
          ldb_selections_error        = 5
          ldb_selections_not_accepted = 6
          variant_not_existent        = 7
          variant_obsolete            = 8
          variant_error               = 9
          free_selections_error       = 10
          callback_no_event           = 11
          callback_node_duplicate     = 12
          OTHERS                      = 13.
IF sy-subrc <> 0.
WRITE: 'Exception with SY-SUBRC', sy-subrc.
ENDIF.
FORM callback_spfli USING name TYPE ldbn-ldbnode
                          wa    TYPE spfli
                          evt   TYPE c
                          check TYPE c.
CASE evt.
    WHEN 'G'.
      WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
      ULINE.
    WHEN 'L'.
      ULINE.
ENDCASE.
ENDFORM.
FORM callback_sflight USING name TYPE ldbn-ldbnode
                            wa    TYPE sflight
                            evt   TYPE c
                            check TYPE c.
WRITE: / wa-fldate, wa-seatsocc, wa-seatsmax.
ENDFORM.

How to fetch data from multiple fact tables from a normalized schema?

Hello everybody,
I am working on a normalized schema to build my repository. I have categorized the tables into dimensions and facts. I have 3 fact tables in my schema and they have a 1:m:1 relationship i.e. if I have table A, B, and C; A has 1:m relationship with B and C also has 1:m relationship with B. How can I use measures from these tables to create a star schema. If A = Sales, B = Transaction, C = Payment_Amount
Sales(Sales ID, Amount, Tax pct, ...)
Transaction(Transaction ID, Sales ID, Payment ID,Transaction Amt, ...)
Payment_Amount(Payment ID, Check ID, Payment Made, ...)
Please give me some direction to pursue.
Thank you!
D

Hi dcole,
Go through this link for snowflake schema http://gerardnico.com/wiki/datamodeling/snowflake_
http://www.rittmanmead.com/2007/06/19/obiee-data-modeling-tips-1-integrating-1-1-and-1-many-source-tables/
I suppose it should work with snowflake schema...Im interested in this topic please let me know what is your approach every now and then.
By,
KK

Need ABAP program logic to fetch datas from four tables

Hi Friends,
I have to develop a print program for purchase requisition.
when a program is executed it has to accept the PR number,and it has to display the purchase requisition informations,also it has to display the address of the plant in the header.
I have to fetch datas from EBAN,T001W,ADR2,ADR3 and ADR6.so i need all your help in writing the best select query for this program to work efficiently.
Thanks in advance.

Please don't just unload your specification here and expect others to do your work.
Thread locked.
Thomas
P.S. "Total questions: 231 (191 unresolved)" is a lousy track record, please close your open questions properly, leaving a final comment only when it adds value.

How does the query decide which Infoprovider to fetch data from

Hi,
Could somebody please explain what steps go on in background to enable the query to decide which Infoproviders it should fetch data from in a multiprovider.Assuming that in the multprovider we have some infocubes that are logically partitioned by Fiscal Year and other cubes that are not.
Thanks VK..

Does the RRKMULTIPROVHINT technique work in case of a multiprovider that is not homogenous... Also in case there are 5 infocubes, does the select query run on fact table of all infocubes or are select queries run initially on the dimension tables and based upon which infocube has the required data for the query the fact table is queried..
Thanks

How to fetch data from a SAP BW Cube via Perl/PHP on a Linux machine?

Hi all,
here's the scenario:
I need to fetch data from a cube of a remote SAP NetWeaver 7. The data will later be used in a web application based on Linux and Perl/PHP. (I'd prefer using perl for the backend and doing the business logic of the web application.)
I have:
A Linux system with all its on-board tools and scripting languages.
A user for the SAP BW which allows me to logon (very,very limited user rights, no se37,no se80,no rsaX and so on)
Access to http://<SAP BW Server>:<Port>/sap/bw/xml/soap/xmla with the above mentioned user.
My questions:
- Could you please push me into the right direction how I can realize this? E.g. by pointing to tutorials / HowTos / sample code / CPAN modules etc.. (Most information I found so far referred to software based on a different operating system and on remote function calls using custom functions.)
- I'm aware of the SAPNW::RFC CPAN module, but do I necessarily have to perform a remote function call? ( If so, is there a "standard" function I could call for accessing a cube?)
Thanks a lot in advance!

You can take through the RFCS .check for some system function modules...but why do you need to route it through XI?How huge z the files?

How to fetch data from DataBase using Servlet ?

Hi all,
Till now, i was just sending values from web page and receive the data in excel format using servlets.
But, now, i want to fetch data from data base. I will be giving inputs in the web page(for the query)....ON click of submit button,
Servlet should be called.
Depending on the input, query has to be executed, and response should be sent to the user.
How to do it?
Code
import java.text.*;
import java.sql.*;
import java.util.*;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.OutputStream;
/** Simple servlet that reads three parameters from the html
form
public class Fetchdata extends HttpServlet
          String query=new String();
          String uid="ashvini";
          String pwd="******";
          try
               Connection con=null;
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               String url = "jdbc:odbc:Testing";
               con = DriverManager.getConnection(url, uid, pwd);
               Statement s = con.createStatement();
               query = "select * from gowri.msllst1";
               ResultSet rs = s.executeQuery(query);
          public void doGet(HttpServletRequest request,HttpServletResponse response)
          throws ServletException, IOException
                    response.setContentType("application/vnd.ms-excel");
                    ServletOutputStream out=response.getOutputStream();
                    out.println("<HTML>" +"<BODY BGCOLOR=\"#FDF5E6\">\n" +
                    "<H1 ALIGN=CENTER>" + title + "</H1>\n" +
                    "<table>" +" <th>ITEM Code</th>");
                    while(rs.next())
                    out.println("<tr><td>" rs.getString(1).trim()"</tr></td>");
                    }//end of while
                    out.println("</table></BODY></HTML>");
               }//end of doGet method
     }catch(Exception e)
                    System.out.println(e);
It is giving error message as:
C:\Program Files\Apache Tomcat 4.0\webapps\general\srvlt>javac Fetchdata.java
Fetchdata.java:17: illegal start of type
try
^
Fetchdata.java:48: <identifier> expected
^
2 errors
Is this format is correct? am i placing this doGet method at the right place? is my program's logic is correct?
Please help me?
Regards
AShvini

There is some mistakes in ur code.....how can try catch exists outside a function???
make use of try catch isde ur doGet method and put
Connection con=null;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
String url = "jdbc:odbc:Testing";
con = DriverManager.getConnection(url, uid, pwd);
Statement s = con.createStatement();
query = "select * from gowri.msllst1";
ResultSet rs = s.executeQuery(query);
isdie doGet method, for the time being,
i think u get me..
regards
shanu

Fetch data from IDoc

Hi All
I have to fetch data from idoc means the values of the idoc fields.
In table EDIDD, all the data is getting stored in single field "SDATA".
Is there any table in which records stored as individual?
Regards.

Hi Nikhil,
Unfortunaltely there is no table which stores value for individual segment field level, the reason is clear that How can SAP define such table it will require Coulmns for each Segment field, Even if logically its not making sense.
You can read the Segment structure programatically and then Map it to the Values stored in EDIDD (EDID4).
I think we have to bear with this pain
Best Luck....
Regards
Shital

To fetch Data from multiple database tables!

How to fetch Data from fields of multiple database tables!
Give me one example!

use <b>join....</b>
c the SAPHELP docs...
FROM tabref1 [INNER] JOIN tabref2 ON cond
Effect
The data is to be selected from transparent database tables and/or views determined by tabref1 and tabref2. tabref1 and tabref2 each have the same form as in variant 1 or are themselves Join expressions. The keyword INNER does not have to be specified. The database tables or views determined by tabref1 and tabref2 must be recognized by the ABAP Dictionary.
In a relational data structure, it is quite normal for data that belongs together to be split up across several tables to help the process of standardization (see relational databases). To regroup this information into a database query, you can link tables using the join command. This formulates conditions for the columns in the tables involved. The inner join contains all combinations of lines from the database table determined by tabref1 with lines from the table determined by tabref2, whose values together meet the logical condition (join condition) specified using ON>cond.
Inner join between table 1 and table 2, where column D in both tables in the join condition is set the same:
Table 1                      Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
    Inner Join
    |--||||||||--|
    | A | B | C | D | D | E | F | G | H |
    |--||||||||--|
    | a1 | b1 | c1 | 1 | 1 | e1 | f1 | g1 | h1 |
    | a2 | b2 | c2 | 1 | 1 | e1 | f1 | g1 | h1 |
    | a4 | b4 | c4 | 3 | 3 | e2 | f2 | g2 | h2 |
    |--||||||||--|
Example
Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE   LIKE SFLIGHT-FLDATE,
      CARRID LIKE SFLIGHT-CARRID,
      CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
    INTO (CARRID, CONNID, DATE)
    FROM SFLIGHT AS F INNER JOIN SPFLI AS P
           ON FCARRID = PCARRID AND
              FCONNID = PCONNID
    WHERE P~CITYFROM = 'FRANKFURT'
      AND P~CITYTO   = 'NEW YORK'
      AND F~FLDATE BETWEEN '20010910' AND '20010920'
      AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.

RFC fetching data from table which is not commited

Hi Experts,
               I have a query regarding commit work.Below is the RFC that i have written
FUNCTION ZBAPI_CREATE.
*"*"Local Interface:
*" TABLES
*"      IT_ZABAP_RFC STRUCTURE ZBAPI_RFC_STR OPTIONAL
*"      RETURN STRUCTURE BAPIRET2 OPTIONAL
CALL FUNCTION 'ZBO_BAPI_CREATE'
TABLES
   IT_ZABAP_RFC       = IT_ZABAP_RFC
   RETURN             = return
Break-point.
DATA lt TYPE TABLE OF ZBAPI_RFC_STR_MAIN.
CALL FUNCTION 'ZBAPI_SEARCH_RANGE'
* EXPORTING
*   IS_STR        =
TABLES
   ET_TAB        = lt
*   RETURN        =
ENDFUNCTION.
here in first RFC call i am creating a record in ZTABLE , and then at break-point
i check the ZTABLE where it does not create any record because data is not commited into ZTABLE upto this point, but just after it i have written code for fetching data from ZTABLE but i am able to get this new record in lt.
Can anybody please explain that from where this serach RFC is providing data because inside serach i am simply selecting data from ZTABLE.
Regards,
Abhishek Bajpai
Edited by: ABHISHEK BAJPAI on Jan 28, 2009 1:12 PM

Hi Thomas,
                 Thanks for reply , i checked in ZTABLE ,before search RFC call data is not there but if i commit explicitly only then it is showing data in ZTABLE. Actually my requirement is different -
I have two RFCs 1. Create 2. Search , Now from web dynpro user will call first Create RFCs but at this point it should not insert record in ZTABLE and just after it user will call another search RFC and in this search he should be able to get these newly created records.
I want to have the functionality which a user gets when working with normal database front end like SQLPLus for Oracle. In these scenarios we see that whenever user does any insert or update the data sits in the table but still it is not committed. So there he fires Select query he sees the inserted data. But if he logs off from SQL PLUS and then logs in again, and fires Select query he does not see the data as it was not committed. I want a similiar functionalty in which if user inserts the data through Create RFC and fires the Select query through Search RFC then he can see the newly Created data also even though this data is not committed.
Although if i call create RFC in update task it will not update ZTABLE but in this situation , if user will call search RFC he will not be able to get newly created records.
So my requirement is that i should be able to get those records which are not commited in ZTABLE .If you have still any doubt regarding my question then please let me know.
Regards,
Abhishek

Fetching data from internal table in smartform

Hi,
I'm able to fetch data from one internal table, but in the table the fields are not coming perfectly, can anybody help me in this?
Thanks in advance.

Hi
You have to to specify the text node that you have created for the table that it belong to which cell in the table. Also you styles to format the text(eg: left aligned, center alinged etc)
If you have further query please post.
If this resolves your query close the thread and reward points
Cheers
Shafiq

Multiple select queries used in Excel BI report ,fetching data from Sharepoint DB(SP2010_Prod_ProjectServer) causing blockage on DB ,when more than one workbook(same copy of Excel BI Report) refreshed using Refresh All option.

I am using mutiple select queries to fetch data from Project Server 2010 DB(its sharepoint DB) and these queries fetch data in Excel BI report by establishing connection with DB using instance name and all. I have enhance all these select queries and data
is being fetched in secs. but when more than one copy of same Excel BI report is refreshed using 'Refresh All' option, then these select queries cause blockage on DB.
Please let me know mitigation for this blockage issue.
Should I use begin transaction and commit transaction statements/ shared lock statements.
please reply

Hi,
run same query at the same time?

Deleting the data from logical file/unix file

Hi all.
I need to delete the all the data from logical file (application server file/unix file).But I dont want to delete the logical file ( only data in the logical file should be deleted, i.e making file empty)
Thanks in advance.
Cheers.
sami

Hi Sami,
Refer thsi document https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4d7aeb7d-0c01-0010-fa8a-a4a8e8968a93.
Regards,
Flavya

Select query taking too much time to fetch data from pool table a005

Dear all,
I am using 2 pool table a005 and a006 in my program. I am using select query to fetch data from these table. i.e. example is mentioned below.
select * from a005 into table t_a005 for all entries in it_itab
                   where vkorg in s_vkorg
                   and     matnr in s_matnr
                   and     aplp   in s_aplp
                   and     kmunh = it_itab-kmunh.
here i can't create index also as tables are pool table...If there is any solutions , than please help me for same..
Thanks ,

it would be helpful to know what other fields are in the internal table you are using for the FOR ALL ENTRIES.
In general, you should code the order of your fields in the select in the same order as they appear in the database. If you do not have the top key field, then the entire database is read. If it's large then it's going to take a lot of time. The more key fields from the beginning of the structure that you can supply at faster the retrieval.
Regards,
Brent

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

Fetching data from 2 logical Fact

Similar Messages

Maybe you are looking for