Fetching survey (xml) data into the smartform
hi,
We are on CRM 5.0 and working withj surveys attached to the transactions
Requirement is as follows:
When the survey attached to the complaint transaction is filled up and saved with the transaction a smart form mail consisting of the survey details (Questions and answers) should go as a PDF mail.
Our concern is we are unable to pull the survey data ( questions and answers ) into the smart form as they are on xml format.
Can anyone help with step by step method for this ?
Also is there a standard class and method to acheive this .
Full points for good answers
Regrads
Raj
hi raj..
use the following code to acheive the reqirement
read survey details using crm_order_read into it_survey1
then use the following code...
u will get the data into e_all_values...
then loop the e_all_values....
<<<<code>>>>>
data : it_survey type CRMT_SURVEY_WRKT.
data : it_survey1 type CRMT_SURVEY_WRKT with header line.
data: li_1 type ref to CL_CRM_SVY_SURVEY_TEXTS.
types: begin of survy_s_all_values1,
question_id type string,
answer_id type string,
value type string,
end of survy_s_all_values1.
data : I_SURVEY_ID type CRM_SVY_DB_SID,
I_SURVEY_VERSION type CRM_SVY_DB_SVERS,
I_VALUEGUID type CRM_SVY_DB_SV_GUID,
I_VALUEVERSION type CRM_SVY_DB_SV_VERS,
E_ALL_VALUES type SURVY_T_ALL_VALUES,
ET_TEXTS TYPE CRM_SVY_API_SURVEY_TEXT_T.
data : wa_E_ALL_VALUES type survy_s_all_values1.
data : wa_et_texts type CRM_SVY_API_SURVEY_TEXT.
move it_survey1-SURVEYID to I_SURVEY_ID.
move it_survey1-SURVEYVERSION to I_SURVEY_VERSION.
move it_survey1-VALUEVERSION to I_VALUEVERSION.
move it_survey1-VALUEGUID to I_VALUEGUID.
data: li_1 type ref to CL_CRM_SVY_SURVEY_TEXTS.
CREATE OBJECT LI_1
EXPORTING
I_SURVEY_ID = I_SURVEY_ID
I_SURVEY_VERSION = I_SURVEY_VERSION
I_LANGUAGE = SY-LANGU
I_VALUEGUID = I_VALUEGUID
I_VALUEVERSION = I_VALUEVERSION
CALL METHOD LI_1->GET_ALL_VALUES
IMPORTING
E_ALL_VALUES = E_ALL_VALUES.
CALL METHOD LI_1->GET_ALL_TEXTS
IMPORTING
ET_TEXTS = ET_TEXTS.
clear : wa_E_ALL_VALUES.
CALL METHOD LI_1->GET_ALL_TEXTS
IMPORTING
ET_TEXTS = ET_TEXTS.
loop at E_ALL_VALUES into wa_E_ALL_VALUES.
clear : wa_ET_TEXTS.
read table ET_TEXTS into wa_ET_TEXTS with key ID = wa_E_ALL_VALUES-QUESTION_ID.
clear : l_text.
move wa_ET_TEXTS-text to l_text.
condense l_text.
TRANSLATE l_text TO UPPER CASE.
clear : wa_ET_TEXTS.
case l_text.
when 'MEASUREMENT'.
case l_m.
when 1.
move wa_e_all_values-value to w1.
when 2.
move wa_e_all_values-value to w2.
when 3.
move wa_e_all_values-value to w3.
when 4.
move wa_e_all_values-value to w4.
when 5.
move wa_e_all_values-value to w5.
endcase.
l_m = l_m + 1.
endcase.
endloop.
regards
sam
Similar Messages
-
INSERTION OF XML DATA INTO THE TABLE USING XMLDOM
hello,
i am using XMLDOM to insert the data into the table
i am using different function of it.
but i am facing the problem to retrive the the multiple entry.
like in my example i have two entry of the ' po number '
& i am using the function
dbms_xmldom.item(l_nodelist, 0)
i which i have to pass index no.
& through this i am getting only single entry according to the index no.
Example on which i am working is
declare
l_xml_data CLOB;
l_xml_doc dbms_xmldom.domdocument;
l_nodelist dbms_xmldom.DOMNodeList;
l_node dbms_xmldom.domnode;
l_xmltype XMLTYPE;
l_po_num VARCHAR2(30);
l_cust_ord VARCHAR2(30);
l_item_code VARCHAR2(30);
begin
l_xml_data := '<?xml version="1.0" encoding="UTF-8"?>
<!--DOCTYPE MobileInventoryResponse SYSTEM "MobileInventoryResponse.dtd"-->
<MobileInventoryResponse>
<message>
<message-header>
<message-id>16244182</message-id>
<transaction-name>ship-advice</transaction-name>
<partner-name>cbeyond</partner-name>
<source-url>http://www.brightpoint.com</source-url>
<create-timestamp>20080826150709</create-timestamp>
<response-request>1</response-request>
</message-header>
<ship-advice>
<header>
<customer-id>297859</customer-id>
<shipment-information>
<ship-first-name>RA_13Aug_1</ship-first-name>
<ship-last-name>MIND</ship-last-name>
<ship-address1>test</ship-address1>
<ship-city>test</ship-city>
<ship-state>VA</ship-state>
<ship-post-code>22102-4931</ship-post-code>
<ship-country-code>US</ship-country-code>
<ship-phone1>0040726335068</ship-phone1>
<ship-email>[email protected]</ship-email>
<ship-via>FX01</ship-via>
<ship-request-date>20080826</ship-request-date>
<ship-request-warehouse>CBY1</ship-request-warehouse>
</shipment-information>
<purchase-order-information>
<purchase-order-number>380928</purchase-order-number>
<purchase-order-number>380929</purchase-order-number> ----modi by Ananda Dubey
<account-description/>
<purchase-order-amount>0.0</purchase-order-amount>
<currency-code>USD</currency-code>
</purchase-order-information>
<order-header>
<customer-order-number>0002759</customer-order-number>
<customer-order-date>20080826</customer-order-date>
<order-sub-total>19.0</order-sub-total>
<order-discount>0.0</order-discount>
<order-tax1>0.0</order-tax1>
<order-tax2>0.0</order-tax2>
<order-tax3>0.0</order-tax3>
<order-shipment-charge>18.0</order-shipment-charge>
<order-total-net>0.0</order-total-net>
<order-status>Completed</order-status>
<order-type/>
<brightpoint-order-number>35028788</brightpoint-order-number>
<warehouse-id>CBY1</warehouse-id>
<ship-date>20080826</ship-date>
</order-header>
</header>
<detail>
<line-item>
<line-no>1</line-no>
<item-code>SKU1</item-code>
<universal-product-code>0</universal-product-code>
<ship-quantity>1.0</ship-quantity>
<unit-of-measure>EA</unit-of-measure>
<serial-list>
<serial-numbers>
<esn>TIMI000013</esn>
</serial-numbers>
</serial-list>
<line-status/>
<base-price>0.0</base-price>
<line-discount>0.0</line-discount>
<line-tax1>0.0</line-tax1>
<line-tax2>0.0</line-tax2>
<line-tax3>0.0</line-tax3>
<bill-of-lading>929406733828</bill-of-lading>
<scac>FX01</scac>
</line-item>
</detail>
</ship-advice>
<transactionInfo>
<eventID>16244182</eventID>
</transactionInfo>
</message>
</MobileInventoryResponse>';
l_xml_doc := dbms_xmldom.newDomDocument(l_xml_data);
-- Method 1 to get data
l_nodelist := dbms_xmldom.getelementsbytagname(l_xml_doc, 'purchase-order-number');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from list
l_po_num := dbms_xmldom.getnodevalue(dbms_xmldom.getfirstchild(l_node));
dbms_output.put_line(l_po_num);
l_nodelist := dbms_xslprocessor.selectnodes(dbms_xmldom.makenode(l_xml_doc),
'/MobileInventoryResponse/message/ship-advice/detail/line-item/item-code');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from list
l_item_code := dbms_xmldom.getnodevalue(dbms_xmldom.getfirstchild(l_node));
dbms_output.put_line(l_item_code);
l_xmltype := XMLTYPE(l_xml_data);
l_cust_ord := l_xmltype.extract('/MobileInventoryResponse/message/ship-advice/header/order-header/customer-order-number/text()').getStringVal();
dbms_output.put_line(l_cust_ord);
dbms_xmldom.freeDocument(l_xml_doc);
end;
/In the following code
l_nodelist := dbms_xmldom.getelementsbytagname(l_xml_doc, 'purchase-order-number');
l_node := dbms_xmldom.item(l_nodelist, 0); -- gets first item from listYou need to understand what the second parm on the .item call does. See [dbms_xmldom.item|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_xmldom.htm#i1126138]
The nodelist is a 0 based array of information and you are only requesting to pull the node info in the first array position. So to get the info in the second array position, you need to use ", 1)". You can also use .getLength and a loop to parse through everything in the node list. -
What is the best and easiest way to get xml data into the rtf document
Hello Frenz
I'm using rtf document(with bi publisher desktop plug in installed in the word document)... please suggest me the best way(to get the xml data from tables) to load the xml data into this rtf document..
I'm not developing oracle apps reports. It is for Oracle retail...
another doubt is... in the rtf document itself there is oracle bi publisher.. can it be used for generating xml data...
please bear with me and suggest me a way out
Thanks and regardsWhat will you be using in your production system to generate XML? Or are you just trying out BIP?
If you're familiar with dbms_xmlquery.getxml , you can pass your SQL to generate the XML output. Save the output in a file and use it in your RTF template.
If you have Oracle reports, you can create XML output when you run the report. -
Flex 4 - is it possible to load xml data into the preloader and pass it to the application?
or is there a similar method to load XML data while the preloader is active, so the XML data will be ready when the main application loads?
i'm having great difficulty finding any relevant info from the forum and the web about accessing preloader variables from the application.
is there a way to access the preloader itself from the application?
It seems logical that the systemManager garbage collects it. If that's the case, how can i access the systemManager from the preloader and possible pass variables to it, then later access them from the application? this seems to be the best direction to tackle this problem. but maybe i'm overlooking another way? -
Loading xml data into the datagrid
Hi all,
I'm trying to learn Flex. I have a small doubt in loading the datagrid from the xml response (from php script)
mxml code:
<mx:DataGrid id="dataGrid" x="69" y="250">
<mx:columns>
<mx:DataGridColumn headerText="Name" dataField="name"/>
<mx:DataGridColumn headerText="Age" dataField="age"/>
<mx:DataGridColumn headerText="Location" dataField="location"/>
</mx:columns>
</mx:DataGrid>
<mx:HTTPService resultFormat="e4x" result="getDataCallback(event)" id="getDataHttp" url="http://localhost/test/getData.php" method="POST"></mx:HTTPService>
<mx:Button click="getDataHttp.send();" label="Load Data" x="379" y="268"></mx:Button>
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
[Bindable] public var mydata:XMLList = new XMLList();
function getDataCallback(event:ResultEvent):void{
trace(event.result.data.info);
mydata = event.result.data.info;
dataGrid.dataProvider = mydata;
]]>
</mx:Script>
PHP Script
<?php
$xml = "<?xml version=\"1.0\" ?><data>";
$xml .= "<info><name>name1</name><age>26</age><location>location1</location></info>";
$xml .= "<info><name>name2</name><age>27</age><location>location2</location></info>";
$xml .= "</data>";
header("content-type:text/xml");
echo $xml;
But the data is not being loaded into the datagrid. Please anyone help me out ..
Thanks in advance
-Pavan... and I doubt you are using the word "doubt" in its correct sense.
-
Using importdata to import xml data into dynamic PDF form
Hi again,
Me and my colleagues have a problem using the importData service to import some xml data into an empty PDF form (represented as an XFA input variable).
In the server log I get the error that Only XDP data is supported for XFA forms, however I only have the xml data and not the entire xdp available.
Is this really not possible to to (like importing xml data to a form is possible in the Designer when creating forms).
I hope the scenario is understandable
Sincerely
Kim Christensen
Dafolo A/S
Denmark
PS: During the various projects I am working on I keep running into problems...however I am totally new to LiveCycle so I consider this very informative learning steps and appreciate all your help :-)Hi again,<br /><br />I have been experimenting a little with both the renderPDFForm and importData services. However I don't seem to be ble to make them work as I need them to.<br /><br />My scenario is simple, I have one (call it a template xdp/PDF form) and lots of data in xml files (around 1000), that I need to import into the template. Therefore I have set up a "Watched Folder" to take the xml as a document (I guess this is a requirement) and then I need either the renderPDF or importData services to import the xml data into the template.<br /><br />I would like to know how I should setup the services to make this work.<br /><br />When I try to use importdata I setup the following:<br /><br />PDF document: set to be the template i need to import the xml to)<br /><br />Input data: the document variable (an xml file) that is passed to the Watched Folder<br /><br />Data merged PDF: set to an out xfaform<br /><br />When I do this I get an Coercion error in the server log:<br /><br />2007-11-15 13:27:05,324 ERROR [com.adobe.workflow.AWS] stalling action-instance: 1506 with message: ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.<br /> at com.adobe.idp.dsc.util.CoercionUtil.toDOMDocument(CoercionUtil.java:656)<br /> at com.adobe.idp.dsc.util.CoercionUtil.toType(CoercionUtil.java:878)<br /> at com.adobe.idp.dsc.util.CoercionUtil.toType(CoercionUtil.java:803)<br /> at com.adobe.workflow.datatype.runtime.support.AbstractDataTypeRuntimeHandler.coerceFrom(Abs tractDataTypeRuntimeHandler.java:64)<br /> at com.adobe.workflow.datatype.runtime.support.AbstractComplexDataTypeRuntimeHandler.getNode (AbstractComplexDataTypeRuntimeHandler.java:47)<br /> at com.adobe.workflow.dom.VariableElement.setBoundValue(VariableElement.java:93)<br /> at com.adobe.workflow.pat.service.PATExecutionContextImpl.setProcessDataValue(PATExecutionCo ntextImpl.java:729)<br /> at com.adobe.workflow.pat.service.PATExecutionContextImpl.setProcessDataWithExpression(PATEx ecutionContextImpl.java:335)<br /> at com.adobe.idp.workflow.dsc.service.SetValueService.execute(SetValueService.java:46)<br />...<br />Caused by: ALC-DSC-119-000: com.adobe.idp.dsc.util.InvalidCoercionException: Cannot coerce object: <document state="passive" senderVersion="3" persistent="false" senderPersistent="true" passivated="true" senderPassivated="true" deserialized="true" senderHostId="127.0.0.1/172.16.10.125" callbackId="0" senderCallbackId="7" callbackRef="null" isLocalizable="true" isTransactionBound="false" defaultDisposalTimeout="600" disposalTimeout="600" maxInlineSize="65536" defaultMaxInlineSize="65536" inlineSize="8039" contentType="application/xml" length="-1"><cacheId/><localBackendId/><globalBackendId/><senderLocalBackendId/><senderGl obalBackendId/><inline><?xml version="1.0" encoding="UTF-8"?><br /><form1><br /> <sub_BlanketTop /><br /> <sub_SubjectTop><br /> <f...</inline><senderPullServantJndiName>adobe/idp/DocumentPullServant/adobejb_server1</s enderPullServantJndiName><attributes file="c:\NCRConvert\ProcessForm\stage\Wx450d4b32843a0b0bcb8ef99e\NCR-00564_dXAE3soH.xml"/ ></document> of type: com.adobe.idp.Document to type: interface org.w3c.dom.Document<br /> at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)<br /> at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)<br /><br />However it is possible to manually import the xml data in Acrobat Professional without any problems.<br /><br />When I use the renderPDFForm with the following settings:<br /><br />Form to render: literal value that points to the template<br /><br />Form data: document variable from watched folder (xml)<br /><br />Content Root URI: repository://<br /><br />With these settings I also get a coercion error, however it does not seem to be exactly the same.<br /><br />Sincerely<br />Kim
-
Insert XML Data Into An Existing PDF Form
I am working on an application, written with XHTML and JavaScript, and running on AIR, so it is a desktop application.
Users enter data into an XHTML form and upon submission I create an XML file of the data using JavaScript.
At any later time users will be able to open the XML file from the application. I will use JavaScript, again, to read the XML and fill in an XHTML form. But at this point I will provide a button for users to generate a PDF with the data. I would then like to insert the XML data into the appropriate fields of the existing PDF form. I would like to continue to do this from within the AIR application using JavaScript.
Is this possible?
What version of Acrobat would I need as the developer? Professional or Standard or Other or None?
What version of Acrobat would the end users need? Professional or Standard or Other or None?
Can this all be done using only JavaScript and the Acrobat SDK? Does using AIR offer any help (all Adobe products)?
When the end user clicks the generate PDF button would Acrobat have to open? Can this be done without the user seeing Acrobat open? Either way is ok, I would just like the user to see an alert saying that the file has be generated and point them to its location on the local machine. But again, this is not a requirement.
Thanks in advance.
Not asking for source code here, just if its possible. :)
I'll figure out the how.You have two choices
1) You can use JavaScript in your AIR application to communicate with the JavaScript in the PDF to fill in the form directly. This can all be done inside of your AIR app. This is certainly the best route to go and there is (IIRC) a sample in the AIR SDK.
2) You can create an XFDF file from your XML data and then have Acrobat/Reader open the XFDF file to fill in the data.
Both methods will work with Acrobat and Reader - HOWEVER, Reader users won't be able to save the PDF unless it has been Reader Enabled.
Leonard -
Inserting XML data into and XML template
I have XML data structured according to a schema. I also have a
template structured with the same schema, plus a schema for document formatting. I want to merge the XML data into the Template to produce an output file.
I know I can write a program to use XPath or DOM, but I am sure a generic solution already exists for this. I did not have any luck with google.
Suggestions?
thanks
d1I have XML data structured according to a schema. I also have a
template structured with the same schema, plus a schema for document formatting. I want to merge the XML data into the Template to produce an output file.
I know I can write a program to use XPath or DOM, but I am sure a generic solution already exists for this. I did not have any luck with google.
Suggestions?
thanks
d1 -
Hi,
I need to load the xml data into the relational tables. I was trying to use a DOM parser, but the thing is that i had to hard code the element node values to match the columns in the tables, and in later stage if there is change to the xml i have to change my program and recompile, i want a more flexible solution, where in i can parse the data and load into database without much changes. I do not know how to accomplish this. I have searched on this topic, but could not find a clear solution anywhere. Can anybody suggest a solution to this.
Thanks & regards.For which database?
With the Oracle database an XML document may be stored in a database with the XML SQL (XSU) utility.
1. Create a table in the database with columns corresponding to the elements in the XML document.
2. With the XSU store the XML document. The attributes in the XML document do not get stored.
3. To store the attributes also, apply an XSLT to the XML document and convert the attributes to elements. -
Insert data into the xml schema-based xmltype table problem!
Hello, there,
I got problem in inserting data into the xmltype table after registered XML schema and created table. details see below:
1) xml schema:
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XMLSpy v2007 sp2 (http://www.altova.com) by Constantin Ilea (EMERGIS INC) -->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" targetNamespace="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1" elementFormDefault="qualified">
<!-- ************** PART I: BEGIN SIMPLE OBJECT TYPE DEFINITIONS ********************************** -->
<xs:simpleType name="RoutingType">
<xs:restriction base="xs:string">
<xs:enumeration value="Synch"/>
<xs:enumeration value="Asynch"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="StatusType">
<xs:restriction base="xs:string">
<xs:enumeration value="ACTIVE"/>
<xs:enumeration value="VOID"/>
<xs:enumeration value="PENDING"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="SenderApplicationType">
<xs:restriction base="xs:string">
<xs:enumeration value="PR"/>
<xs:enumeration value="CR"/>
<xs:enumeration value="POS"/>
<xs:enumeration value="CPP"/>
<xs:enumeration value="Other"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="ServiceTypeType">
<xs:restriction base="xs:string">
<xs:enumeration value="IS"/>
<xs:enumeration value="WS"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="RouteDirect">
<xs:restriction base="xs:string">
<xs:enumeration value="Request"/>
<xs:enumeration value="Reply"/>
<xs:enumeration value="None"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="Indicator">
<xs:annotation>
<xs:documentation>can we also change the value to "ON" and "OFF" instead? in this way this cn be shared by all type of switch indicator</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:enumeration value="YES"/>
<xs:enumeration value="NO"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="RuleType">
<xs:restriction base="xs:string">
<xs:enumeration value="ControlAct"/>
<xs:enumeration value="WSPolicy"/>
<xs:enumeration value="AccessControl"/>
<xs:enumeration value="Certification"/>
<xs:enumeration value="MessageConformance"/>
<xs:enumeration value="Variant"/>
<xs:enumeration value="Routing"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="HL7Result">
<xs:restriction base="xs:string">
<xs:enumeration value="ACCEPT"/>
<xs:enumeration value="REFUSE"/>
<xs:enumeration value="REJECT"/>
<xs:enumeration value="ACK"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="IIPType">
<xs:restriction base="xs:string">
<xs:enumeration value="PUT"/>
<xs:enumeration value="GET/LIST"/>
<xs:enumeration value="NOTIF"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="ProfileTypeType">
<xs:restriction base="xs:string">
<xs:enumeration value="IIPProfile"/>
<xs:enumeration value="BizOperationProfile"/>
<xs:enumeration value="OrchestrationProfile"/>
<xs:enumeration value="DomainObjectProfile"/>
<xs:enumeration value="ServiceProfile"/>
<xs:enumeration value="ExceptionProfile"/>
<xs:enumeration value="CustomizedProfile"/>
<xs:enumeration value="SystemProfile"/>
<xs:enumeration value="HL7XMLSchemaProfile"/>
<xs:enumeration value="EnricherParametersProfile"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="ParameterType">
<xs:restriction base="xs:string">
<xs:enumeration value="String"/>
<xs:enumeration value="Object"/>
<xs:enumeration value="Number"/>
<xs:enumeration value="Document"/>
</xs:restriction>
</xs:simpleType>
<!-- ************** PART I: END SIMPLE OBJECT TYPE DEFINITIONS ********************************** -->
<!-- ************** PART II: BEGIN COMPLEX OBJECT TYPE DEFINITIONS ********************************** -->
<!-- *********************** begin new added objects, by rshan *************************************** -->
<xs:complexType name="ProfileType">
<xs:annotation>
<xs:documentation>
1.Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
2.ProfileID used to uniquely identify the current profile
3.ProfileData used to hold all the necessary profile related data
</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="ProfileID" type="ProfileIDType">
<xs:annotation>
<xs:documentation>this will hold all the common attributes, espically the global unique identifier to the profile, no matter what type of profile is</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="ProfileData" type="ProfileDataType">
<xs:annotation>
<xs:documentation>all the non-common profile meta data that attached to each specific profile type such as IIPProfile, OrchestrationProfile, and BizOperationProfile will be placed here</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:complexType name="ProfileIDType">
<xs:annotation>
<xs:documentation>global unique identifier and all the common attributes across all different profiles, the @ID and @Type together will be used as the primary key to identify the profile data</xs:documentation>
</xs:annotation>
<xs:attribute name="ID" type="xs:ID" use="required">
<xs:annotation>
<xs:documentation>ID is the global unique identifier to the profile, no matter what type of profile it is</xs:documentation>
</xs:annotation>
</xs:attribute>
<xs:attribute name="Name"/>
<xs:attribute name="Description"/>
<xs:attribute name="Version">
<xs:annotation>
<xs:documentation>version of the profile data</xs:documentation>
</xs:annotation>
</xs:attribute>
<xs:attribute name="Type" type="ProfileTypeType" use="required">
<xs:annotation>
<xs:documentation>value to identify the ProfileType type within
IIPProfile,BizOperationProfile,OrchestrationProfile,DomainObjectProfile
ServiceProfile,ExceptionProfile,SystemProfile,HL7XMLSchemaProfile,
EnricherParametersProfile,CustomizedProfile
</xs:documentation>
</xs:annotation>
</xs:attribute>
<xs:attribute name="Status" type="StatusType" default="ACTIVE">
<xs:annotation>
<xs:documentation>used to show the related profile data status like "ACTIVE","PENDING","VOID"...</xs:documentation>
</xs:annotation>
</xs:attribute>
<!--
<xs:sequence>
<xs:element name="ProfileReference" type="ProfileIDType" minOccurs="0" maxOccurs="unbounded">
<xs:annotation>
<xs:documentation>this will be the place to hold the integrity relationship with other profiles like foreign key if existed and necessary to show up</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
-->
</xs:complexType>
<xs:complexType name="ProfileDataType">
<xs:annotation>
<xs:documentation>meta data associated tightly to each specific type of profile</xs:documentation>
</xs:annotation>
<xs:choice>
<xs:element name="EnricherParametersProfileData" type="EnricherParametersDataType">
<xs:annotation>
<xs:documentation>Enricher Parameters related profile data
1. one instance of this type may contains all the related System metadata.
2. idType part may use to identify different version/release/status
</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="ExtendProfileData" type="ExtendProfileDataType">
<xs:annotation>
<xs:documentation>If needed, any profile data not defined within the current release scope can be added here </xs:documentation>
</xs:annotation>
</xs:element>
</xs:choice>
</xs:complexType>
<xs:complexType name="ExtendProfileDataType">
<xs:sequence>
<xs:element name="ExtendProfile" type="xs:anyType" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="EnricherParametersDataType">
<xs:sequence>
<xs:element name="EnricherParameter" type="EnricherParameter" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="EnricherParameter">
<xs:sequence>
<xs:element ref="Enricher"/>
</xs:sequence>
<xs:attribute name="serviceName" type="xs:string" use="required"/>
<xs:attribute name="interactionID" type="xs:string"/>
</xs:complexType>
<xs:element name="Enricher">
<xs:annotation>
<xs:documentation>Comment describing your root element</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="Parameters" type="Parameters"/>
<xs:element ref="Section" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:complexType name="ValueType">
<xs:attribute name="field" use="required"/>
<xs:attribute name="value"/>
<xs:attribute name="action"/>
</xs:complexType>
<xs:element name="Section">
<xs:complexType>
<xs:sequence>
<xs:element name="Value" type="ValueType" minOccurs="0" maxOccurs="unbounded"/>
<xs:element ref="Section" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="path" use="required"/>
</xs:complexType>
</xs:element>
<xs:complexType name="Parameters">
<xs:sequence>
<xs:element name="Parameter" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xs:attribute name="name" use="required"/>
<xs:attribute name="reference"/>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:complexType name="RuleList">
<xs:annotation>
<xs:documentation>an array of rules</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="Rule" type="RuleProfile" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="RuleProfile">
<xs:attribute name="RName" use="required"/>
<xs:attribute name="RType" type="RuleType" use="required"/>
<xs:attribute name="Status" default="ON">
<xs:annotation>
<xs:documentation>By default is ON (or if is missing)</xs:documentation>
</xs:annotation>
</xs:attribute>
<xs:attribute name="Order"/>
<xs:attribute name="Direction" type="RouteDirect">
<xs:annotation>
<xs:documentation>Request / Reply</xs:documentation>
</xs:annotation>
</xs:attribute>
</xs:complexType>
<!-- ************** PART II: END COMPLEX OBJECT TYPE DEFINITIONS *********************************** -->
<!-- ************** PART III: BEGIN ROOT ELEMENTS DEFINITIONS ********************************* -->
<!-- 0) Profile wrapper root element
Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS
-->
<xs:element name="Profile" type="ProfileType">
<xs:annotation>
<xs:documentation>Profile IS USED TO BE AN WRAPPER ELEMENT FOR ALL KIND OF PROFILES NO MATTER WHAT KIND OF PROFILE IT IS</xs:documentation>
</xs:annotation>
</xs:element>
</xs:schema>
2)register xml schema:
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaurl=>'http://rac3-1-vip:8080/home/'||USER||'/xsd/EHIPProfile_v00.xsd',
5 schemadoc=>xdbURIType('/home/'||USER||'/xsd/EHIPProfile_v00.xsd').getClob(),
6 local=>True,
7 gentypes=>True,
8 genbean=>False,
9 gentables=>False
10 );
11 End;
12 /
PL/SQL procedure successfully completed.
SQL>
SQL>
3) xml data:
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2007 sp2 (http://www.altova.com)-->
<Profile xmlns="http://www.emergis.com/eHealth/EHIP/data/meta/profile:v1">
<ProfileID Type="EnricherParametersProfile" Status="ACTIVE" ID="EnricherPP.ID.0001" Name="EnricherPP.ID.0001" Description="EnricherPP.ID.0001" Version="01"/>
<ProfileData>
<EnricherParametersProfileData>
<EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.ExceptionCreators:createExceptionV50CategoryCanonicalPart" interactionID="">
<Enricher>
<Parameters>
<Parameter name="MESSAGE_ID" reference="test"/>
</Parameters>
<Section path="HEADER">
<Section path="RESPONSE_TYPE">
<Value field="value" value="I"/>
</Section>
<Section path="HL7_STANDARD_VERSION">
<Value field="value" value="HL7V3"/>
</Section>
<Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
<Value field="value" value="NE"/>
</Section>
<Section path="SENDING_NETWORK_ADDRESS">
<Value field="value" value=""/>
</Section>
<Section path="SENDING_APPLICATION_IDENTIFIER">
<Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
<Value field="extension" value=""/>
</Section>
<Section path="SENDING_APPLICATION_NAME">
<Value field="value" value="NL HIAL"/>
</Section>
</Section>
</Enricher>
</EnricherParameter>
<EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectCreators:createFindClientsAssociatedIdentifersRequestObject" interactionID="PRPA_IN101105CA">
<Enricher>
<Parameters>
<Parameter name="MESSAGE_ID" reference="test"/>
</Parameters>
<Section path="HEADER">
<Section path="RESPONSE_TYPE">
<Value field="value" value="I"/>
</Section>
<Section path="HL7_STANDARD_VERSION">
<Value field="value" value="HL7V3"/>
</Section>
<Section path="PROCESSING_CODE">
<Value field="value" value="T"/>
</Section>
<!--
<Section path="PROCESSING_MODE_CODE">
<Value field="value" value="T"/>
</Section>
-->
<Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
<Value field="value" value="NE"/>
</Section>
<Section path="RECEIVER_NETWORK_ADDRESS">
<Value field="value" value="prsunew.moh.hnet.bc.ca"/>
</Section>
<Section path="RECEIVER_APPLICATION_IDENTIFIER">
<Value field="root" value="2.16.840.1.113883.3.40.5.1"/>
<Value field="extension" value=""/>
</Section>
<Section path="SENDING_NETWORK_ADDRESS">
<Value field="value" value=""/>
</Section>
<Section path="SENDING_APPLICATION_IDENTIFIER">
<Value field="root" value="2.16.840.1.113883.3.133.1.3"/>
<Value field="extension" value=""/>
</Section>
<Section path="SENDING_APPLICATION_NAME">
<Value field="value" value="NL HIAL"/>
</Section>
</Section>
</Enricher>
</EnricherParameter>
<EnricherParameter serviceName="LRS_BusinessDomainObject.lrs.businessDomainObject.domainObjectBuilder.concrete.DomainObjectContentEnrichers:enrichPRRequest" interactionID="">
<!--Sample XML file generated by XMLSpy v2007 sp2 (http://www.altova.com)-->
<Enricher>
<Parameters>
<Parameter name="MESSAGE_IDENTIFIER" reference="test"/>
</Parameters>
<Section path="HEADER">
<Section path="HL7_STANDARD_VERSION">
<Value field="value" value="V3PR2"/>
</Section>
<!--POS/CPP populated ?-->
<!--Not sure if this should be set as a variance within EHIP or if we expect the POS/CPP to provide this value-->
<Section path="PROCESSING_CODE">
<Value field="value" value="T"/>
</Section>
<!--POS/CPP populated ?-->
<Section path="PROCESSING_MODE_CODE">
<Value field="value" value="T"/>
</Section>
<!--POS/CPP populated ?-->
<Section path="DESIRED_ACKNOWLEDGMENT_TYPE">
<Value field="value" value="NE"/>
</Section>
<!-- note:We Expect PRS to give us a web service address -->
<!--<Section path="RECEIVER_NETWORK_ADDRESS">
<Value field="value" value="_http://PRSServer/svcName"/>
</Section>
-->
<Section path="RECEIVER_APPLICATION_IDENTIFIER[0]">
<Value field="root" value="2.16.840.1.113883.3.40.1.14"/>
<Value field="extension" value="SIT1"/>
</Section>
<!-- note: values of the fields to be provided by PRS -->
<Section path="RECEIVER_APPLICATION_NAME[0]">
<Value field="value" value="receiverAppName"/>
</Section>
<!-- note: RECEIVER_ORGANIZATION has an extra trailing space, as in the Excel mapping spreadsheet -->
<!-- note: values of the fields to be specified by PRS later -->
<Section path="RECEIVER_AGENT/RECEIVER_ORGANIZATION/RECEIVER_ORGANIZATION_IDENTIFIER[0]">
<Value field="root" value="2.16.840.1.113883.3.40.4.1"/>
<Value field="extension" value="receiverOrgId"/>
</Section>
<Section path="SENDING_APPLICATION_NAME[0]">
<Value field="value" value="NLPRSCLNT"/>
</Section>
<!-- note: SENDING_ORGANIZATION has an extra trailing space, as in the Excel mapping spreadsheet -->
<!-- note: values of the fields to be specified by PRS later -->
<Section path="SENDING_AGENT/SENDING_ORGANIZATION/SENDING_ORGANIZATION_IDENTIFIER[0]">
<Value field="root" value="2.16.840.1.113883.4.3.57"/>
<Value field="extension" value="3001"/>
</Section>
<Section path="PERFORMER/HEALTHCARE_WORKER_IDENTIFIER[0]">
<Value field="root" value="2.16.840.1.113883.4.3.57"/>
<Value field="extension" value="HIAL_USR"/>
</Section>
</Section>
<Section path="PAYLOAD">
<!--<Section path="QUERY_STATUS_CODE">
<Value field="value" value="New"/>
</Section>-->
<!-- note: AUDIT has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="AUDIT[0]/AUDIT_INFORMATION">
<Value field="code" value="LATEST"/>
<Value field="codeSystem" value="PRSAuditParameters"/>
</Section>
<!-- note: CONFIDENCE has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="CONFIDENCE/CONFIDENCE_VALUE">
<Value field="value" value="100"/>
</Section>
<!-- note: HISTORY has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="HISTORY/INCLUDE_HISTORY_INDICATOR">
<Value field="value" value="false"/>
</Section>
<!-- note: JURISDICTION has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="JURISDICTION/JURISDICTION_TYPE">
<Value field="value" value="NL"/>
</Section>
<!-- note: RESPONSE_OBJECT has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[0]">
<Value field="code" value="GRS_ADDRESS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[1]">
<Value field="code" value="GRS_ELECTRONIC_ADDRESS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[2]">
<Value field="code" value="GRS_IDENTIFIER"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[3]">
<Value field="code" value="GRS_ORGANIZATION_NAME"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[4]">
<Value field="code" value="GRS_PERSONAL_NAME"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[5]">
<Value field="code" value="GRS_REGISTRY_IDENTIFIER"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[6]">
<Value field="code" value="GRS_TELEPHONE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[7]">
<Value field="code" value="PRS_CONDITION"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[8]">
<Value field="code" value="PRS_CONFIDENTIALITY_INDICATOR"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[9]">
<Value field="code" value="PRS_DEMOGRAPHIC_DETAIL"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[10]">
<Value field="code" value="PRS_DISCIPLINARY_ACTION"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[11]">
<Value field="code" value="PRS_INFORMATION_ROUTE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[12]">
<Value field="code" value="PRS_NOTE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[13]">
<Value field="code" value="PRS_PROVIDER_CREDENTIAL"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[14]">
<Value field="code" value="PRS_PROVIDER_EXPERTISE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[15]">
<Value field="code" value="PRS_PROVIDER_RELATIONSHIP"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[16]">
<Value field="code" value="PRS_STATUS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[17]">
<Value field="code" value="PRS_WORK_LOCATION"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[18]">
<Value field="code" value="PRS_WORK_LOCATION_ADDRESS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[19]">
<Value field="code" value="PRS_WORK_LOCATION_DETAIL"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[20]">
<Value field="code" value="PRS_WORK_LOCATION_ELECTRONIC_ADDRESS"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[21]">
<Value field="code" value="PRS_WORK_LOCATION_INFORMATION_ROUTE"/>
</Section>
<Section path="RESPONSE_OBJECT[0]/PROVIDER_QUERY_RESPONSE_OBJECT[22]">
<Value field="code" value="PRS_WORK_LOCATION_TELEPHONE"/>
</Section>
<!-- note: ROLE_CLASS has an extra trailing space, as in the Excel mapping spreadsheet -->
<Section path="ROLE_CLASS /ROLE_CLASS_VALUE">
<Value field="value" value="LIC"/>
</Section>
<Section path="SORT_CONTROL[0]/SORT_CONTROL_ELEMENT_NAME">
<Value field="code" value="PrincipalPerson.name.value.family"/>
</Section>
<Section path="SORT_CONTROL[0]/SORT_CONTROL_DIRECTION_CODE">
<Value field="value" value="A"/>
</Section>
</Section>
</Enricher>
</EnricherParameter>
</EnricherParametersProfileData>
</ProfileData>
</Profile>
the data is valid against the schema through XML Spy tool... and loaded into the XDB repository...
4) create table and insert data:
SQL> CREATE TABLE EHIP_PROFILE OF SYS.XMLTYPE
2 XMLSCHEMA "http://rac3-1-vip:8080/home/EHIPSBUSER1/xsd/EHIPProfile_v00.xsd" ELEMENT "Profile"
3 ;
Table created.
SQL>
SQL> alter table EHIP_PROFILE
2 add CONSTRAINT EHIP_PROF_PK PRIMARY KEY(XMLDATA."ProfileID"."ID",XMLDATA."ProfileID"."Type");
Table altered.
SQL>
SQL>
SQL>
SQL>
SQL> select xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob() from dual;
XDBURITYPE('/HOME/'||USER||'/PROFILEDATA/ENRICHERPP.ID.0001.XML').GETCLOB()
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy
SQL>
SQL>
SQL> insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()));
insert into ehip_profile values(xmltype.createXML(xdbURIType('/home/'||USER||'/ProfileData/EnricherPP.ID.0001.xml').getClob()))
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
what's the problem caused the "ORA-21700: object does not exist or is marked for delete" error?
Thanks in advance for your help?Thanks Marco,
Here're my environment:
SQL> select INSTANCE_NUMBER, INSTANCE_NAME,HOST_NAME,VERSION from v$instance;
INSTANCE_NUMBER INSTANCE_NAME HOST_NAME VERSION
2 rac32 RAC3-2 10.2.0.3.0
I followed your suggested in the above, and always purge recyclebin, but still got the same problem. because in 10gr2, there's no dbms_xmlschema.purge_schema available,
and I did checked the recyclebin after force the delete of schema, nothing inside. any other recommendation? -
Hi Friends,
See the followong code which converts xml data into itab.
*& Report ZTEST_XML1 *
REPORT ZTEST_XML1 .
*PURPOSE: This program transfers XML data into SAP internal table format
*The nodes in DOM can be stored as fields in SAP Internal table
type pool definitions
TYPE-POOLS: ixml. "iXML Library Types
type definitions
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
data(256) TYPE x,
END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
l_streamfactory TYPE REF TO if_ixml_stream_factory,
l_parser TYPE REF TO if_ixml_parser,
l_istream TYPE REF TO if_ixml_istream,
l_document TYPE REF TO if_ixml_document,
l_node TYPE REF TO if_ixml_node,
l_xmldata TYPE string.
DATA: l_elem TYPE REF TO if_ixml_element,
l_root_node TYPE REF TO if_ixml_node,
l_next_node TYPE REF TO if_ixml_node,
l_name TYPE string,
l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line, " XML Table of the structure
*t_xml_line
l_xml_line TYPE t_xml_line, " Record of structure t_xml_line
l_xml_table_size TYPE i. " XML table size
DATA: l_filename TYPE string. " String to hold filename
data: begin of i_final occurs 0,
pnumber(20),
pname(50),
pdes(70),
end of i_final.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'C:\product.xml'.
Validation of XML file: Only DTD included in XML document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
start of selection
START-OF-SELECTION.
Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
Wrap the table containing the file into a stream.
l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
size = l_xml_table_size ).
Creating a document
l_document = l_ixml->create_document( ).
Creating a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
istream = l_istream
document = l_document ).
Validate a document
IF pa_val = 'X'.
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
ENDIF.
Parse the stream
IF l_parser->parse( ) <> 0.
IF l_parser->num_errors( ) <> 0.
DATA: parseerror TYPE REF TO if_ixml_parse_error,
str TYPE string,
i TYPE i,
count TYPE i,
index TYPE i.
count = l_parser->num_errors( ).
WRITE: count, ' parse errors have occured:'.
index = 0.
WHILE index < count.
parseerror = l_parser->get_error( index = index ).
i = parseerror->get_line( ).
WRITE: 'line: ', i.
i = parseerror->get_column( ).
WRITE: 'column: ', i.
str = parseerror->get_reason( ).
WRITE: str.
index = index + 1.
ENDWHILE.
ENDIF.
ENDIF.
Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
PERFORM process_dom USING l_document.
ENDIF.
*& Form get_xml_table
text
<--P_L_XML_TABLE_SIZE text
<--P_L_XML_TABLE text
FORM get_xml_table CHANGING p_l_xml_table_size
p_l_xml_table.
Local variable declarations
DATA: l_len TYPE i,
l_len2 TYPE i,
l_tab TYPE tsfixml,
l_content TYPE string,
l_str1 TYPE string,
c_conv TYPE REF TO cl_abap_conv_in_ce,
l_itab TYPE TABLE OF string.
l_filename = pa_file.
Upload file from the client's workstation
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = l_filename
filetype = 'BIN'
IMPORTING
filelength = l_xml_table_size
CHANGING
data_tab = l_xml_table
EXCEPTIONS
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Writing the XML document to the screen
CLEAR l_str1.
LOOP AT l_xml_table INTO l_xml_line.
c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement
= space ).
c_conv->read( IMPORTING data = l_content len = l_len ).
CONCATENATE l_str1 l_content INTO l_str1.
ENDLOOP.
l_str1 = l_str1+0(l_xml_table_size).
SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
WRITE: /.
WRITE: /' XML File'.
WRITE: /.
LOOP AT l_itab INTO l_str1.
REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
l_str1 WITH space.
WRITE: / l_str1.
ENDLOOP.
WRITE: /.
ENDFORM. " get_xml_table
*& Form process_dom
text
-->P_L_DOCUMENT text
FORM process_dom USING document TYPE REF TO if_ixml_document.
DATA: node TYPE REF TO if_ixml_node,
iterator TYPE REF TO if_ixml_node_iterator,
nodemap TYPE REF TO if_ixml_named_node_map,
attr TYPE REF TO if_ixml_node,
name TYPE string,
prefix TYPE string,
value TYPE string,
indent TYPE i,
count TYPE i,
index TYPE i.
node ?= document.
CHECK NOT node IS INITIAL.
ULINE.
WRITE:/.
WRITE: /' DOM-TREE'.
WRITE: /.
IF node IS INITIAL.
EXIT.
ENDIF.
Create a node iterator
iterator = node->create_iterator( ).
Get current node
node = iterator->get_next( ).
Loop over all nodes
WHILE NOT node IS INITIAL.
indent = node->get_height( ) * 2.
indent = indent + 20.
CASE node->get_type( ).
WHEN if_ixml_node=>co_node_element.
element node
name = node->get_name( ).
nodemap = node->get_attributes( ).
WRITE: / 'ELEMENT :'.
WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
IF NOT nodemap IS INITIAL.
attributes
count = nodemap->get_length( ).
DO count TIMES.
index = sy-index - 1.
attr = nodemap->get_item( index ).
name = attr->get_name( ).
prefix = attr->get_namespace_prefix( ).
value = attr->get_value( ).
WRITE: / 'ATTRIBUTE:'.
WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
value COLOR COL_TOTAL INVERSE.
ENDDO.
ENDIF.
WHEN if_ixml_node=>co_node_text OR
if_ixml_node=>co_node_cdata_section.
text node
value = node->get_value( ).
WRITE: / 'VALUE :'.
WRITE: AT indent value COLOR COL_GROUP INVERSE.
ENDCASE.
Advance to next node
node = iterator->get_next( ).
ENDWHILE.
*delete adjacent duplicates from i_final.
*loop at i_final.
*write:/ i_final-pnumber,i_final-pname,i_final-pdes.
*endloop.
*if not i_final[] is initial.
*modify ztestproduct from table i_final.
*endif.
ENDFORM. " process_dom
in the above code at line no: 268 there is a method:
value = node->get_value( ).in which actual data from XML file is coming.
So the varibale "Value" contains the data.
see line no: 270:
WRITE: AT indent value COLOR COL_GROUP INVERSE.
what ever values i am getting here i want to append to a Internal table ...
Can any body tell me how to do that?
i am sure of reward points.Hai Ravi
REPORT abc.
DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
FIRST PHASE
FIRST PHASE
FIRST PHASE
Fetch Data
SELECT * FROM t001 INTO TABLE t001.
XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
Convert to TABLE
CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
EXPORTING
i_string = xml_out
i_tabline_length = 100
TABLES
et_table = itab.
Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:\xx.xml'
TABLES
data_tab = itab.
SECOND PHASE
SECOND PHASE
SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:\XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[].
Regards
Sreeni -
Smartforms : Repeation of data on the smartforms, but in ABAP is correct.
Hi all,
I am fetching the data on the smartforms by ABAP program, but when it is comming on the smartforms, it is repeat.
In the ABAP program, i have a internal table which is contain the some fields, and in the smartforms, i am using the table ->Program lines ->Text to show the data. so how am i correct it.?
Regards,Hi,
I have a internal table with data as:
doc no ref. no posting_key amount
1002 po/0012 31 15000
1002 po/0012 40 1000
1002 po/0012 50 500
and i have a four variable as: netamt, grsamt, tdsamt & othamt.
then i have a condition as :
IF WA_FINAL-BSCHL = '31'.
NETAMT = WA_FINAL-DMBTR.
ENDIF.
IF WA_FINAL-BSCHL = '40'.
GRSAMT = WA_FINAL-DMBTR.
ENDIF.
IF WA_FINAL-BSCHL = '50'.
TDSAMT = WA_FINAL-DMBTR.
ENDIF.
READ TABLE T_FINAL INTO WA_FINAL
WITH KEY BELNR = WA_FINAL-BELNR.
OTHAMT = WA_FINAL-DMBTR.
alter this conditon i want to show the data on the smartforms as:
srno. docno refno netamt(net amt) grsamt(gross amt) tdsamt(tds amt) othamt (other amt)
Regards, -
How to load a XML file into the database
Hi,
I've always only loaded data into the database by using SQL-Loader and the data format was Excel or ASCII
Now I have to load a XML.
How can I do?
The company where I work has Oracle vers. 8i (don't laugh, please)
Thanks in advance!Hi,
Tough job especially if the XML data is complex. The have been some similar question in the forum:
Using SQL Loader to load an XML File -- use 1 field's data for many records
SQL Loader to upload XML file
Hope they help.
Regards,
Sujoy -
Hi Experts,
Can any body tell me how can we get XML data from 3rd party(For ex: Serena tool) into CRM system?Hi Ravi,
You can populate the BAPI's from the IDOC data and then BAPI will create the data into the system. SAP has provided n number of BAPI's for the same.
For e.g. Say the XML file has the Business Partner data. XI converts it into IDOC and sends it to CRM system. In CRM we read the data from the IDOC and then populate the BAPI BAPI_BUPA_CREATE_FROM_DATA to create the business partner, BAPI_BUPA_ADDRESS_ADD to create address data for the business partner and so on.
<b>Reward points if it helps.</b> -
Xml data into non-xml database.. solution anyone?
Hi,
My current project requires me to store the client's data on our servers. We're using Oracle9i. Daily, I will download the client's data for that day and load it into our database. My problem is that the data file is not a flat file so I can't use sql*loader to load the data. Instead, the data file is an xml file. What is the best way to load xml data into a non-xml database? Are there any tools similar to sql*Loader that will load xml data into non-xml database? Is it the best solution for the client to give me an XML dump of their data to load into our database, or should I request a flat file? My last resort would be to write some sort of a script to parse the xml data into a flat file, and then run it through sql*loader. Is this the best solution? One thing to note is that these files could be very large.
Thanks in advance.
-PVI assume that just putting the XML file into an
extremely large VARCHAR field is not what you want.
Instead, you want to extract data elements from the
XML and write them to columns in a table in your
database. Right?Yes. Your assumption is correct.
It sounds like you already have a script that loads a
flat file into your database. In that case I would
write an XSL transformation that converts the client's
XML into a correctly-formatted flat file.Thank you. I'll look into that. Other suggestions are welcome.
Maybe you are looking for
-
How to set a Guide at the start of a shape?
hello: Level: Newbie-intermediate OS: Win 7 Ps. Cs6 i have been searching for the answer to this question but i think that maybe i don't
-
Aperture 3.3.2 and Mountain Lion
Aperture crashes in Mountain Lion when trying to do multiple processes. I get multi windows, photos then have to reboot I re-installed Aperture 3.3.2 with updates, Still crashes when doing more then one thing. I have a macbook pro 15" 2.66 core 2 du
-
Hi all, Does anyone know of a web interface? I mean, we do already read some data from SBO through SQL, because we want to redesign our site so our full catalog comes from SBO. That's easy to do if you query through SQL. The challenge is now that we
-
Notification center freezing when I make a tweet from it
It only freezes when i send a tweet anyone else know how to fix this?
-
Facing problem in canceling the service entry sheet
Everytime i am trying to cancel the service entry sheet following errormessage is being displayed " Error posting acceptance of Entry Sheet 1000009476 Choose (1) Eror Log (2) Save w/o acceptance (3) Exit without saving. and when i am choosing error l