Fewer files in cons than dev, caused by "hung" activities

Hi,
We are doing CRM development with a JDI track, and have some problems with the first transport to Test.
After comparing the cons inactive with the dev active workspace (through http://<jdi server>/dtr/system-tools/reports/WorkspaceComparison), we see many files that are only in the dev active workspace and we currently believe that is the reason for our problems.
The root cause of this problem is that multiple activities have been created that have been activated (check-in) , but not released. We can see the list of activities under dtr/system-tools/reports/ActivityQuery, but not in the transport view of NWDS, even though the user filter is set to all users.
Normally, I would have created a new activity and added a single space to all the files, in order to force the activity over. But here we have 943 files !
Is there any way I can force the unreleased activities to be released from outside NWDS ?
Regards
Dagfinn

What is your Date Filter set to in the Transport View?
I don't think there's another way to release activities for transport.

Similar Messages

When copying raw files from Extreme IV card to hardrive, finder copies a few files then exits task and wipes the card clean of all images.

When copying raw files from Extreme IV card to hardrive, finder copies a few files then exits task and wipes the card clean of all images. Have tried new card and card-reader to no avail. Have done this many times on other macs with no problems.
Can edit files off the card, in CameraRaw, prior to 'copying' them, ie can 'save as' to the hard drive, so files seem okay on card, before I try to copy them using copy and paste.
Running OS 10.8.3 on a new macbook pro.

Rita,
The process for determining what is causing the files to be corrupt can be a tedious one depending on the following:
1. Can you review the images on your camera's LCD screen without problems? If not then the problem is most probably either a corrupted/faulty memory card or a faulty camera. If this is the case then your best bet at recovery (of sorts) is to use a program such as BrezzeBrowser from BreezeSys to extract the embedded jpeg versions of the corrupted RAW files from within each RAW file. Chances are, you won't manage to actually repair the corrupted RAW file but the jpegs are better than nothing.
2. If the images review ok on your camera but are corrupted when viewing on your computer and there seems to be no other problem with other files on your computer then it may be either a faulty card reader or usb/firewire cable between the card reader and the computer that is the culprit. Try the card reader with a different cable and also try a different card reader to determine the cause of the corruption.
3. If your symptoms are that you get different files corrupting over time when viewing them on your computer then the problem may be any one of either failing RAM memory, hard disk, hard disk controller or IDE/SATA hard disk cables. This is where the troubleshooting can be pretty tedious testing then eliminating each item from the list of suspicious pieces of hardware. Try the card and card reader on an altogether different computer to see if the files transfer correctly to that computer. If so then the problem lies with your computer hardware. If you haven't already done so at this stage, backup all your important data immediately (hopefully you keep backs anyway).
Hope this helps.

Is there a way to open CSV files with more than 255 columns?

I have a CSV file with more than 255 columns of data. It's a fairly standard export of social media data that shows volume of posts by day for the past year, from which I can analyze the data and publish customized charts. Very easy in Excel but I'm hitting the Numbers limit of 255 columns per table. Is there a way to work around the limitation? Perhaps splitting the CSV in two? The data shows up in the CSV file when I open via TextEdit, so it's there. Just can't access it in Numbers. And it's not very usable/useful for me in TextEdit.
Regards,
Tim

You might be better off with Excel. Even if you could find a way to easily split the CSV file into two tables, it would be two tables when you want only one. You said you want to make charts from this data. While a series on a chart can be constructed from data in two different tables, to do so takes a few extra steps for each series on the chart.
For a test to see if you want to proceed, make two small tables with data spanning the tables and make a chart from that data. Make the chart the normal way using the data in the first table then repeat the following steps for each series
Select the series in the chart
Go to Format sidebar
Click in the "Value" box
Add a comma then select the data for this series from the second chart
Press Return
If there is an easier way to do this, maybe someone else will chime in with that info.

NT 4.0, LabVIEW 6, Error 4 (END OF FILE) when trying to seek to byte offset 4096 (from start of file) when the file is larger than 2 Gig

If I try to seek (or read) with the position mode wired and set for START, I get error 4 (END OF FILE) if the file is larger than 2 GB. I'm only trying to move the file pointer 4096 bytes, not trying to seek or read more than 2GB, but I get the error if the file is over 2Gig.
Instead, I have to do reads, with the position mode unwired, until I get to the place in the file that I want to be.
Is this expected behavior?

Hello,
LabVIEW File I/O functions use an I32 value to store the size of a file. This means that we are limited to ~2GB file sizes when using the File I/O functions in LabVIEW. This explains why you are seeing odd behavior when trying to read to the end of the file, since this is causing the byte count to exceed ~2GB.
I hope this explanation sheds some light on the situation for you. Hopefully the workaround (repeated reads) is not too much of an inconvenience.
Good luck with your application, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

Accidentally deleted a few files...

Hey, I accidently deleted a few files:
javascript.html
javascript.js
and one other I forgot, but it had to do with javascript.
Anyone know if these are important and how to replace them if they are.
Thanks.

Thanks, yeah, I already deleted them a while back thinking they caused this annoying split second pop-up window, but they weren't the ones. Anyway, I think they were part of Dreamweaver, so I'll just leave it alone until it acts up, if it ever does. Thanks again.

Project settings - few file formats are involved

Hi,
I would like to create a project that combines few file formats:
- AVCHD (.m2ts) files taken by Panasonic HDC-TM700 at 1920x1080i and downloaded from the camera by Panasonic's HD writer AE 2.1
- MP4 files taken by GOPRO Hero HD at 1920x720
- Stills
Videos are PAL. I'm using PE9
What settings should I use for this project?
What settings should I use for an export file to be played on a computer?
Thanks

As I've written about pretty extensively on Premiere Elements support site Muvipix.com, you definitely should NOT combine a number of video formats in the same project. It only leads to trouble.
You should be able to set up a project for that AVCHD 1920x1080 video. And you can load the photos in there is they're sized to no larger than 2000x1500 pixels and you've gone to Edit/Preferences and unchecked the option to Scale to Frame Size.
But if you try to add that GoPro footage to the project, it could lead to problems.
It's worth a try, of course. But it's a very different format. And, if you start having problems with your project, it will likely be the culprit.
Ideally, when your project settings match your footage, there will be NO red lines above the clips on your timeline until you add effects to them. That's a good test to see if you've chosen the right AVCHD project settings.
But, once you do see red lines above your clips (and you will always see red lines above photos!) be sure to render yoru timeline by pressing the Enter key. The red lines will turn green. As long as you keep green lines above your clips, the program should perform well.

Problem to increaase max open files to more than 1024

Hello,
I tried to increase the max open files to more than 1024 in the following way
$ sudo nano /etc/security/limits.conf
mysql hard nofile 8192
mysql soft nofile 1200
However, after reboot I am still not able to start MariaDB:
$ sudo systemctl start mysqld
Job for mysqld.service failed. See 'systemctl status mysqld.service' and 'journalctl -xn' for details.
$ sudo systemctl status mysqld
● mysqld.service - MariaDB database server
Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled)
Active: activating (start-post) since Tue 2014-09-02 13:08:20 EST; 53s ago
Main PID: 6504 (mysqld); : 6505 (mysqld-post)
CGroup: /system.slice/mysqld.service
├─6504 /usr/bin/mysqld --pid-file=/run/mysqld/mysqld.pid
└─control
├─6505 /bin/sh /usr/bin/mysqld-post
└─6953 sleep 1
Sep 02 13:08:20 acpfg mysqld[6504]: 140902 13:08:20 [Warning] Could not increase number of max_open_files to more than 1024 (request: 4607)
I am using the following /etc/mysql/my.cnf
[mysql]
# CLIENT #
port = 3306
socket = /home/u/tmp/mysql/mysql.sock
[mysqld]
# GENERAL #
user = mysql
default-storage-engine = InnoDB
socket = /home/u/tmp/mysql/mysql.sock
pid-file = /home/u/tmp/mysql/mysql.pid
# MyISAM #
key-buffer-size = 32M
myisam-recover = FORCE,BACKUP
# SAFETY #
max-allowed-packet = 16M
max-connect-errors = 1000000
skip-name-resolve
sql-mode = STRICT_TRANS_TABLES,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_AUTO_VALUE_ON_ZERO,NO_ENGINE_SUBSTITUTION,NO_ZERO_DATE,NO_ZERO_IN_DATE,ONLY_FULL_GROUP_BY
sysdate-is-now = 1
innodb = FORCE
innodb-strict-mode = 1
# DATA STORAGE #
datadir = /home/u/tmp/mysql/
# BINARY LOGGING #
log-bin = /home/u/tmp/mysql/mysql-bin
expire-logs-days = 14
sync-binlog = 1
# CACHES AND LIMITS #
tmp-table-size = 32M
max-heap-table-size = 32M
query-cache-type = 0
query-cache-size = 0
max-connections = 500
thread-cache-size = 50
open-files-limit = 65535
table-definition-cache = 1024
table-open-cache = 2048
# INNODB #
innodb-flush-method = O_DIRECT
innodb-log-files-in-group = 2
innodb-log-file-size = 128M
innodb-flush-log-at-trx-commit = 1
innodb-file-per-table = 1
innodb-buffer-pool-size = 2G
# LOGGING #
log-error = /home/u/tmp/mysql/mysql-error.log
log-queries-not-using-indexes = 1
slow-query-log = 1
slow-query-log-file = /home/u/tmp/mysql/mysql-slow.log
How is it possible to increase the number?
Thank you in advance.

Change/add in the my.ini file, under [mysqld]:
max_allowed_packet=2048M
Reference:
* http://dev.mysql.com/doc/refman/5.5/en/ … wed_packet

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

I want to Update a few files on my laptop and I have a New Apple ID but my old one is on it and I have to enter that one to update the files how do I change it?

I configured my laptop with my old apple ID but I forgot the password for that Apple ID and Email dress so I got a new Apple ID and now There are a few files I want to update but I need to enter In my old apple ID for it. Also it can't be erased so can someone help me?

Click here and use Apple's iForgot service, or delete and redownload that content.
(119527)

Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

Please let me know what I can do to get my Numbers (iWork 09) working properly again.
Here is what is going on:
Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers. I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
The document "Blank.nmbtemplate" is invalid. The index.xml file is missing.
I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists. Since then Numbers is not working right.
I'm sure it's something simple to fix, but I've tried re installing it and that didn't work. Appreciate any help.
Thanks
AppMare

There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

How can I search for files with more than one keyword?

I´ve created some keywords, and some files in my folder are tagged with two, three or more keywords.
Is there a way to search for files using more than one keyword on the search field?
Thanks!

Use the Find command (menu Edit) and in criteria at the right side is a plus sign to add another criteria and set it to your custom wishes.
make a choice in results and you should be OK

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

I am not able to open few files from my external hard disc in snow lepord

i am not able to open few files from my external hard disc in snow lepord

Need more information. Is there a message when you try to open them?

ERROR in configuration:more elements in file csv structure than filed names

Hello, we have problem with file content conversion on file (FTP) sender adapter when reading flat delimited file. Error: Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'P':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified! Details: We have windows machine and line in a file is ended with CRLF. We have PI 7.0 SP10, and following pathches: SAPXIAF10P_3-10003482 SAPXIAFC10P_4-10003481 Adapter Type: File Sender Transport Protocol: File Transfer Protocol (FTP) Message Protocol: File Content Conversion Adapter Engine: Integration Server FTP Connection Parameters Transfer Mode: Binary Processing Parameters File Type: Binary Channel: IN_XXXXX_FILE_WHSCON Input File: (WZ00008.DAT) N|0025013638||0000900379|0000153226|2007-07-24|2007-07-24|||| P|000030|2792PL1|2303061|1|KRT||||| Content Conversion Prameters: Recordset Structure: N,1,P, Recordset Sequence: Ascending Key Field Name: KF Key Field Type: String N.fieldNames: N1,N2,N3,N4,N5,N6,N7,N8,N9,N10 N.fieldSeparator: | N.endSeparator: 'nl' N.processFieldNames: fromConfiguration N.keyFieldValue: N P.fieldNames: P1,P2,P3,P4,P5,P6,P7,P8,P9,P10 P.fieldSeparator: | P.endSeparator: 'nl' P.processFieldNames: fromConfiguration P.keyFieldValue: P At the same time we have another channel very similar to this on which works: Channel: IN_XXXXX_FILE Input File: (PZ000015.DAT) N|2005-11-25|13:01|| P|0570001988|2005|305|6797PL1|2511091|3500|SZT|2005-11- 25|1200|G002|1240|G002||| Content Conversion Prameters: Recordset Structure: N,1,P, Recordset Sequence: Ascending Key Field Name: KF Key Field Type: String N.fieldNames: N1,N2,N3,N4 N.fieldSeparator: | N.endSeparator: 'nl' N.processFieldNames: fromConfiguration N.keyFieldValue: N P.fieldNames: P1,P2,P3,P4,P5,P6,P7,P8,P9,P10,P11,P12,P13,P14,P15 P.fieldSeparator: | P.endSeparator: 'nl' P.processFieldNames: fromConfiguration P.keyFieldValue: P Converted file: <?xml version="1.0" encoding="utf-8"?> <ns:PZ_MT xmlns:ns="<a href="http://xxxxx.yyyyy.hr">" target="_blank" title="Open this link in a new window">http://xxxxx.yyyyy.hr"></a> <PZ> <N> <N1>N</N1> <N2>2005-11-25</N2> <N3>13:01</N3> <N4></N4> </N> <P1>P</P1> <P2>0570001988</P2> <P3>2005</P3> <P4>305</P4> <P5>6797PL1</P5> <P6>2511091</P6> <P7>3500</P7> <P8>SZT</P8> <P9>2005-11-25</P9> <P10>1200</P10> <P11>G002</P11> <P12>1240</P12> <P13>G002</P13> <P14></P14> <P15></P15> </PZ> </ns:PZ_MT> And, if we remove last delimiter before CRLF in WZ00008.DAT file then file works, but we dont't have fields N10 and P10 in a XML converted file. Converted file: <?xml version="1.0" encoding="utf-8"?> <ns:WZ_MT xmlns:ns="<a href="http://xxxxx.yyyyy.hr">" target="_blank" title="Open this link in a new window">http://xxxxx.yyyyy.hr"></a> <WZ> <N> <N1>N</N1> <N2>0025013639</N2> <N3></N3> <N4>0000900379</N4> <N5>0000153226</N5> <N6>2007-08-01</N6> <N7>2007-08-01</N7> <N8></N8> <N9></N9> </N> <P1>P</P1> <P2>000010</P2> <P3>0212PL1</P3> <P4>2007071</P4> <P5>1.000</P5> <P6>KRT</P6> <P7></P7> <P8></P8> <P9></P9> </WZ> </ns:WZ_MT> Regards, Mladen Kovacic

Hello,
it seems that we have problem with SAP XI AF CPA Cache.
We make this changes and after this AF Cache stops working.
 In the Visual Administrator, in service SAP XI AF CPA Cache, set the SLDAccess parameter to false
 Save your entry and start the service
 In service SAP XI AF CPA Cache, check that the cacheType parameter has the value DIRECTORY
 In service SAP XI Adapter: XI, enter values for:
o xiadapter.isconfig.url - http://xidev:8038/sap/xi/engine?type=entry
o xiadapter.isconfig.username - XIAFUSER
o xiadapter.isconfig.password
o xiadapter.isconfig.sapClient - 001
o xiadapter.isconfig.sapLanguage - en
 On the Integration Server, use transaction SMICM to check that you have entered the correct URL for the Integration Server.
 On the Integration Server, use transaction SU01 to create a new user XIAFUSER
 Assign the role SAP_XI_AF_SERV_USER_MAIN to the user XIAFUSER
 In the Visual Administrator, check whether the user synchronization was successful
 Use the new user to log on to the Integration Server and change the initial password to master password
Any idea for SAP XI AF CPA Cache update?

Fewer files in cons than dev, caused by "hung" activities

Similar Messages

Maybe you are looking for