FF4 open to the last webpage viewed and not the home page.

When reopening FF4, the last page viewed opens rather than the home page.

This should never happen when the cursor is in an editing control, but it has always done that if the focus was on the page itself.
Here's how to change it:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box that appears above the list, type or paste '''backs''' and pause while the list is filtered
(3) Double-click the '''browser.backspace_action''' preference and enter the desired value:
* 0 => back (default)
* 1 => page up
* 2 => ignore (actually, anything other than 0 or 1 does nothing)
OK to save the change. You're done.

Similar Messages

  • Hi I would like to know, how do I add a Hyperlink on Flash, that opens a PDF in adobe reader and not the web browser.

    Hi I would like to know, how do I add a Hyperlink on Flash, that opens a PDF in adobe reader and not the web browser.

    Yoh, what is FSCCommanr ? sorry man I am an absolute beginner in Flash. I tried the code:
    /* Click to Go to Web Page
    Clicking on the specified symbol instance loads the URL in a new browser window.
    Instructions:
    1. Replace http://www.adobe.com with the desired URL address.
       Keep the quotation marks ("").
    instance_name_here.addEventListener(MouseEvent.CLICK, fl_ClickToGoToWebPage);
    function fl_ClickToGoToWebPage(event:MouseEvent):void {
      navigateToURL(new URLRequest("http://www.adobe.com"), "_blank");
    this is the same code I used before and it opens a pdf file in a web browser, and it doesn't open an AutoCAD file.

  • TS3274 I went to an Apple store yesterday and the guy there did something and now the ipad only works in the vertical (portrait) position and not the horizontal (landscape) position.  How can we make it work in both positions?

    I went to an Apple store yesterday and the guy there did something and now the ipad only works in the vertical (portrait) position and not the horizontal (landscape) position.  How can we make it work in both positions?

    Just in case you are not running iOS 7 and don't have the control center feature.....
    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it and you are running iOS 5 or 6, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
    If you are running iOS 7, swipe up from the bottom of the screen to get to the control center and the lock icon is in the row of icons at the top all the way to the right.
    If the screen is unlocked but still will not rotate, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button

  • Can i just show the pop-menu gif and not the links when sending to a printer?

    I would like the navigation gif of my pop-menu to display
    when the user prints my webpage, but not all the navigation links
    below it. So far in my print.css style sheet I have the table
    container to display: none; But I'd like to show the gif of the
    navigation bar and not the links print below it. Is this possible -
    since Fireworks creates an html with a div of a table container?
    #FWTableContainer1157383077{
    display: none;
    I think I want it to display the navigation bar which is the
    gif in the code below ( but it is inside the div of the table
    container)
    <img name="PopMenu_2" src="PopMenu/PopMenu.gif"
    width="780" height="20" border="0" id="PopMenu" usemap="#m_PopMenu"
    alt="" />
    And thoughts are greatly appreciated! thanks

    It could be that your signal dropped to GSM which is why it sent as a normal text. You need wi-fi, 3G or HSPDA to send as an iMessage. As does the receiver

  • Is there a way of having the email name show and not the Company name.

    I have a few address listing for Companies that have 7 or 8 names.
    I have them listed with the custom names for each person separately.
    I really do not need separate e-mail listings for each person.
    Is there a way that would list the individuals name on the email header and not the Company name.
    IOW's : ABC company and a listing for John Smith shows ABC when I mail it.
    I gather also that it would show ABC when John Smith received it.
    I am trying to give it a more personal touch without creating dozens of additional address's.
    Thanks,
    Greg
    null

    Thanks for replying Dan, you're right, I should provide more context.
    I want to be able to duplicate a shape inside a layer a number of times, and with every duplicated shape, I want that shape to evaluate what number it is (based on a name I give it so I could name it '1' and then use something like 'eval(propertyname)' to return a number or perhaps use an index to count the number of shapes in the layer) and multiply that number by some set of rules that I can define and control through a list of expression controls on another layer. This would allow me to duplicate a square 10 times and have each square's position do something like
    x = thisShapeNumber + shapeLength * TranslateExpressionControl;
    y = 0;
    [x,y]
    which would form a long line of squares for instance. Does that make sense?
    thanks in advance!

  • How can I configure CTRL+Backspace to delete the previous word only and not the preceding space?

    The title pretty much explains it all. I'm using a different computer than usually and I'm pretty sure it used to only delete the word and not the space.

    Your observation is correct: Ctrl+BackSpace shouldn't delete the preceding space. However, if words are separated by two spaces, one of those spaces will be deleted.
    Stefan Blom, Microsoft Word MVP
    This is not the observed functionality in every case. It seems that MSWord haphazardly either removes the space or doesn't remove it.
    As an example, if I type "and when" and hit CTRL+Backspace, it will either delete the word only or the word and the space, but in most cases it will remove the space as well ("and when" becomes "and"). It seems to toggle between the two but I have no idea
    what is triggering it.

  • Aperture photo viewer is showing the last photo I edited, not the thumbnail I click.

    I've seen a few bugs on Aperture 3.5 for Mavericks, but the biggest problem is that when I click a thumbnail in the browser view it shows me the last edited photograph, not the thumbnail I clicked. Quitting and reloading solves this, until I edit 5 or 6 photos, and then it only loads the last edited photograph again, no matter which thumbnail I click, or how many times I try to arrow back and forth to look at a different photo.
    Can't find this problem anywhere online. Anyone else seeing this?

    I have never seen such a behaviour of Aperture.
    Try to narrow down the problem:
    Does it only happen iwith your current Aperture library or with every Aperture library you try?  Create a small test library, if you only have one Aperture library.
    If you have the same problem with a different Aperture library, try, if you see the same thing, when working from a different user account. Sign in as the guest user or another user account, if you have one and test there. DO you also see the problem there?
    Léonie

  • I can not download the last Iphoto update, and in the actual version 9.4.3 it does not work the sending photos by e-mail.

    I can not download the last Iphoto update that I already purchased it by app store, and in the actual version 9.4.3 it does not work the sending photos by e-mail.

    Thanks for your replay,
    Finally the Iphoto 9.5 was installed...any way ..I had to go to app store to purchase it because the previous version did not updated autimatically... only shoed me that there is a new version ...but it guided me to the app store to purchase it.... and I did it because I did not know that the up date was free...and the sistem did not adviced me about that...
    I have the last up date of os x 10.9 already...
    in this new version I have no problem to send the photos by e-mail... but in the previous one it allways showed me an error message like ¨I should try later because the server does not work¨  but I tryed with 4 differents e-mail account that worked perfectly in the app Mail.
    any way, this new version is ok..
    thenks a lot
    Damian from Buenos Aires

  • How can I have links within emails read with Seamonkey open on the default Firefox browser and not the Seamonkey browser?

    I use the SeaMonkey 2.0 mailer for my email client and Firefox 3.6 for my default browser. A link embedded in an email (read with SeaMonkey) opens the SeaMonkey browser and not Firefox. How can I have it open on Firefox?
    (SeaMonkey is not set up as the default browser and Firefox is.)

    See here
    *https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default

  • I've built a header/nav bar, for a website I'm designing, in Edge Animate but when I click on one of the links it opens the URL in the header/nav bar and not the whole web page? How do I fix this so the links open the URL when click on the whole page?

    I'm designing the website in Adobe Muse, using the .OAM file from Edge Animate. Please help.

    Sounds like you may need to set the target url to _parent
    See reference: HTML a target Attribute
    Darrell

  • When I use migration assistant to move all my data from my Macbook Air to my Pro, it uses the last full back up not the last partial back up. The last full backup is two months old though. Both machines are running Mountain Lion. How do I get my latest 1

    Hi
    I need to move my data from a time capsule that backuped my Macbook Air (which has been destroyed by liquid damage) to my Macbook Pro. The Air and the Pro both run Mountain Lion and I have a clean installation on the Macbook Pro.
    I used Migration Assitant to move the data across but while I have back ups of my Air up to 24 hours before it was destroyed, the migration assistant only wishes to migrate data from the last full back up that it finds which is 2 months old.
    Please can you advise how I can restore the latest data to my Macbook Pro.
    Many thanks.

    please let me know the linksys device model number you are using ..

  • Why do my video podcasts now save in a folder under the file name "download"  and not the name of the podcast

    I just downloaded Itunes 10. When I download video podcast they save in a individual folder with the podcasts name.tmp, then inside the folder is the video file just named DOWNLOAD. This didnt happen in the previous versions of itunes why is this happening in Itunes 10? How can I change so that the files save as the name of the podcast.

    Some users seem to be having issues with the latest build (10.2.2) where files are not moved/renamed after downloading. It works fine for me in a test library so I'm not quite sure what the issue is. You may find things sor themselves out if you turn off Keep iTunes Media folder organised and then turn it back agaqin (assuming you use that feature). Hopefully the next update isn't too far away.
    Alternatively you can try my script ConsolidateByMoving which should move selected files that are in the "wrong" place to their standard iTunes locations.
    tt2

  • The last software update does not work putting page numbers on pages?

    With the new update, it does not let me enter page numbers on pages.  Please advise?

    Oooops!
    Thanks for that Jeff. Am running on empty (cerebrally) here in the wee small hours.
    Peter

  • When the browser opens, I want to be able to open all my open tabs from the last session or have a blank home page if there weren't any tabs to reopen. How do I set the homepage to do that?

    When Firefox starts up I would rather have a blank page for the homepage if I didn't have any tabs from my previous session to open up. There doesn't seem to be an option for this. The choice is to either reopen last session tabs OR blank page but does not seem to allow for "if no last session tabs, then open blank page" If it does, then please tell me how.

    It would seem if your choose "Show my windows and tabs from last time" '''''and''''',
    *when you last closed Firefox, you had no web site open (just a blank tab), that it would open just that blank tab
    *when you last closed Firefox, you had one or more tabs/web site open, that would allow you to "Restore Previous Session"
    #Have you tried that?
    #If so, what is happening in each circumstance when you reopen Firefox?
    '''Restore Previous Session'''<br />
    Open tabs are automatically saved when closing Firefox beginning in Firefox 4. To open your last session, after Firefox starts, click History > Restore Previous Session. For this to work
    #You must be remembering history (Options > Privacy > Remember my browsing history).
    #*See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
    #You must not be using Private Browsing or permanent Private Browsing
    #*See [https://support.mozilla.com/en-US/kb/Private%20Browsing Private Browsing]
    #You must not use Clear Recent History or Clear history when Firefox closes
    #*See [https://support.mozilla.com/en-US/kb/Clear%20Recent%20History Clear Recent History]
    #*See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]

  • My iMac opens to a file and not a home page.  How do I make it open to my desktop?

    I must have inadvertantly changed something on my iMac (running 10.9).  When the computer starts up it briefly shows the home screen then, immediately, it goes to some type of file.   How do I get it to open in my desktop again?

    Obviously, I have told the computer to open a folder at startup
    Mac OS has had the behavior that if you have a window open at shutdown, it will automatically have that window open at startup - for your convencience. If you do not want that, there is no need to have a folder open at startup and you can easily avoid that. As mende1 said, make sure you quit (that is Command + Q or File > Quit) all applications before shutdown. And, close all open Finder windows by pressing the little red button in the upper left corner. Also check your System Preferences > General > Close all windows when quitting an application.

Maybe you are looking for

  • How do you check if the input is empty?

    Hello, I am asked to write a program which gets as input in the command line a number of strings, and is to print out the first of these string. but if the input is empty it must print our an error message. how do i check if the input is empty? i gue

  • Intensity plot and MSnode-win​dow communicat​ion

    Two questions: 1) Is there an intensity plot function that can be called from the mathscript window to display 2D arrays (such as a grayscale image), similar to the matlab function "image" or "imagesc"? The only options I saw were to display a 2D arr

  • Help!! How To Connect Java & PostgreSQL Database

    I'm final year student in comp sc. I'm doing java in my thesis. How to get/read data from postgresql using java? My thesis is "2 Dimensional Graph Statistics Online Viewing Using Java Applet". So i need a mechanism how to read data from postgresql da

  • Deleting Objectives from Appraisal Document

    Hi All, I have a criteria group called behavioral competences placed in my document, now a free enhancement is assigned to allow the user to select a qualification from the qualification catalogue and place it in the document. However if a user adds

  • JS ScriptUI container.children[name] problem

    Has anyone any experience accessing controls by name? The JS Tools reference mentions that a control should have been created using the creation property {name: } syntax, which I obey. Nonetheless, I cannot get the control afterwards. I have to use t