Fglrx: How to load intel driver with various options, e.g. AccelMethod

Hi,
When using fglrx and pxpress on a system with hybrid graphics, how can options be set for the intel device?
Normally in the "xorg.conf" I could just put something like
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
EndSection
But with fglrx installed the xorg.conf looks like
Section "ServerLayout"
Identifier "Radeon Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:6:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
(Adding an intel device section in here would cause major problems(I get segfaults). I guess because both fglrx/pxpress and xorg try to launch the i915 driver)
So how can I configure options for the intel driver?
Why do I want to do this?
Well aside from the ability to tweak the integrated GPU performance in the usual manner, I have a bug that occurs when UXA is used as the accleration method, but not when SNA is used for the intel driver (even before fglrx is installed on the system). Without fglrx SNA is the default anyway, but fglrx for some reason likes to use UXA.
Last edited by fpghost84 (2014-01-27 15:16:34)

Hi, thanks for the new link. Yes, this is completely relevant, but unfortunately it's incomplete & didn't work for me. Please pass this along to the documentation team. Referring to the document, here are the steps I followed:
A) Starting at section "Restore your computer when Windows 8 cannot start normally" ...
B) I turned the laptop on & pressed F11 : "System Recovery"
C) Spinning dots never end, just like during normal start-up, as I reported in original post
D) -> Document should mention the option of booting from Windows 8 installation DVD
E) Booting from Windows 8 DVD, I was able to reach step 7 : "On the Advanced options screen, click System Restore ."
F) I was unable to reach step 8 in the section : "Click Windows 8 as the target operating system." b/c I need to load the Intel storage driver for the RAID array that's configured in the BIOS, so that System Restore can see my hard drive.
How can I load that driver??
Thanks,
Brad

Similar Messages

How to load specific driver for specific device not having PnP-ID?

Hello,
as mentoined in a previous post I'm up to adapt an exisiting PCMCIA-based PC Card driver so that it can be used with a PCMCIA/USB adaptor (by using it's driver's IOCTLs), and already had
some success on it: My driver loads and I can read files (for example, in Windows Explorer) from the card as it did before in "PCMCIA version" (I intend to support both with the same driver, which seems
to work at the moment). As it did before, the driver currently creates a MTD (memory technology device). My main "problem" is how to load the driver.
The situation is a bit complicated, I try to give as much details as possible.
For better understanding
The PCMCIA/USB adaptor's driver usually has following device stack: PCMCIA/SUB adaptors driver -> USB mass storage device (USBSTOR.SYS) -> Diskdrive (DISK.SYS [->PARTMGR.SYS]). For more ease - to see if my driver works in general - I installed my driver
via INF using the PnP ID of the "USB mass storage device", with other words I "replaced" the USB mass storage driver with my own driver.
This is my problem
This means - and that is currently my problem - that may driver gets loaded regardless of what is attached to the PCMCIA/USB adaptor. Usually, when attached to PCMCIA, the PC card has a PnP ID the driver can be assigned to. In my case, I have no PnP ID for
the PC card, and the driver may stop because the attached device is not supported The driver will unload properly, but the device remains with error code (in device manager).
What I want to avoid
I already thought about filter drivers between USBSTOR and the PCMCIA/USB adaptor's driver (#1), or above the USB mass storage device (#2). If I'm correct, that means that I have to handle URB/CBW requests for case #1 or at least SCSI requests for case #2 -
but I'm currently not familiar with filter drivers, URB/CBW and/or SCSI. Porting the driver was quiete frustating until yet and I had to get familiar with a couple of technologies that belongs to the driver's functinaliy itselfs -
I hope you understand that I want to avoid getting familiar with more technologies than required.
I think there must be a way to check the device (PC card) at the PCMCIA/USB adaptor
before my driver will be loaded, as well as removing the deivce completely if the PC card was removed (so that it disappears in device manager). But I'm currently have no idea how to do that. Is it possible to
load my driver along the device/driver stack usually created by the PCMCIA/USB adaptor's driver?
Some answerers likes to refer to WDK documentation and samples. In such case - because of their complexity, it would be nice to get a hint about where to start.
Have much thanks in before for any suggestions!
Regards,
Willi K.

Today's memory cards (like CFC) manage their FTL (flash translation layer) in their firmware. Our PC card is quiete old technology and does not have such firmware, this is why Windows cannot recognize the file system (FAT). For example, a request to offset
0 may be somewhere else on our PC Card.
I followed your suggestion and used the HWID of device that appears "above" the USB mass storage device, and my driver seems to work as it did before - OK, made no difference.
But if my driver does not recognize the card (because it is not present or it is another PCMCIA device -> STATUS_NOT_SUPPORTED or STATUS_NO_MEDIA in driver entry), and the device is shown with exclamation mark in device manager.
Two questions remain:
- How can I ensure that other drivers may attach if my driver does not support the device inserted in the adapter?
- How can I force a "re-check" of my driver if there was no card present when driver was loaded?? -> Note: A disk drive always appears in device manager - regardless if a device is attached to the apator or not

How to install scan driver with canon ir2025

how to install scan driver with ir2025

Thats simply
Access the Toshiba European driver page and download the Toshiba graphic driver designed for you notebook series.
Then start the device manager and uninstall the present graphic driver.
Then reboot the notebook and then install the downloaded graphic driver on your system
Thats all ;)

How to declare and work with select-option in screen painter?

hello there,
can anybody plz suggest me ,how to declare and work with select-option in screen painter?
neon

Hi Blue,
Please check these threads which will help you a lot..
module pool programming " to add selection-option on screen"
Re: Select option in Dialog program screen
Re: SELECT-OPTIONS in Screen
Good luck
Narin

My iPhone 3Gs makes no sound with incoming calls although, it does vibrate? I have tried resetting with various options, but still no joy. Any ideas anybody please?

My iPhone 3Gs makes no sound with incoming calls although, it does vibrate? I have tried resetting with various options, but still no joy. Any ideas anybody please?

Fixed the problem. Got the Iphone 5

How to format Windows drive with Mac OS format

Hello
I have a Windows 160gb internal drive that is formated in Fat32. I am unable to format this drive with Mac OS X 10.3.9 in order to install Tiger 10.4. When I attempt to format using the Mac OS extended (journaled), I receive an error (sorry I didn't write it down) partition error. If I use the Mac OS extended option I recieve an error that the drive can not be unmounted.
How can I format this 160gb drive with Mac OS format so that I may install Mac OS X 10.4
Thank you

Do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

How to use 7344 driver with vc under rtx ?

Hello everyone
I am using the PCI 7344 card.Under windows system I use the flexmotion32.dll well with vc,but when I use it under rtx ,it does not work,appering " can not load the driver".The fact is ,as most say,the driver is not suitable under non-windows systems. So I wonder
if there is driver under the rtx,or how to use the windows driver under the rtx.
If it is necessary to develop my own motion driver,what can I do?Does 7344 support register lever programming ? If it does, Can I get the register map of the 7344?
Hope your reply!!
Thank you!!

Hello !
Presently I don`t have ni motion DDK, and it appears that there is no available link to download the DDK at ni`s web.So I wonder if there is more detailed information about the pci-7344 card, for example the port of the registers ,how to mapping to the physical memory etc.
Another question is if ni can offer the source code of the ni motion driver for us to reference!
Thank you!!
Hope your reply!!!

How to load my tree with data from SQL database????

Hello friends
May i know how i can load my tree with my database??
i have 3 different tables and i need them to be the 3 main nodes of my tree
They are
1.fiche
2.amis and
3.famille
and in each of these nodes need to load the 3 databases
thank u in advance

Heres my program so i loaded my vector ,
Now how can i integrate the coding u gave me, and where ??
Is it where i put the quetion mark?
if so
can you tell me how?? because i didnt understood well the codings you gave me as im nt at all familiar with this
Thank you in advance
public class carnetf extends javax.swing.JFrame {
   DefaultMutableTreeNode root =null;
    public carnetf() {
       root= new DefaultMutableTreeNode("Carnet");
        DefaultMutableTreeNode tnFiche=new DefaultMutableTreeNode("Fiche");
       root.add( tnFiche);
        DefaultMutableTreeNode tnAmis=new DefaultMutableTreeNode("Amis");
        root.add( tnAmis);
        DefaultMutableTreeNode tnFamille=new DefaultMutableTreeNode("Famille");
        root.add( tnFamille);
       initComponents();
    public Vector vecfiche() {
        Vector v = new Vector();
        Connection connection = null;
        try
            Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
            DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());;
        catch (Exception E)
            System.out.println("Unable to load driver.");
            System.out.println(E.getMessage());
            E.printStackTrace();
            return null;
        try
            connection = DriverManager.getConnection( "jdbc:microsoft:sqlserver://localhost:1433;user=sa;password=sa;DatabaseName=carnet");
        catch (Exception E)
            System.out.println("Unable to connect.");
            System.out.println(E.getMessage());
            return null;
        try
            Statement Stmt = connection.createStatement();
            if(jRadioButton1.isSelected()==true)
                String Query = "SELECT * FROM fiche";
            ResultSet RS= Stmt.executeQuery( Query );
            while ( RS.next())
             v.add( new vecfiche( RS.getString("Nom"), RS.getString("Prenom")));
            if( RS!= null) RS.close();}
            if(jRadioButton2.isSelected()==true)
                String Query = "SELECT * FROM amis";
            ResultSet RS= Stmt.executeQuery( Query );
            while ( RS.next())
             v.add( new vecfiche( RS.getString("Anom"), RS.getString("Aprenom")));
            if( RS!= null) RS.close();}
            if(jRadioButton3.isSelected()==true)
                String Query = "SELECT * FROM famille";
            ResultSet RS= Stmt.executeQuery( Query );
            while ( RS.next())
             v.add( new vecfiche( RS.getString("Fnom"), RS.getString("Fprenom")));
            if( RS!= null) RS.close();}
            if( Stmt!= null) Stmt.close();
        catch (Exception E)
            System.out.println("Unable to query.");
            System.out.println(E.getMessage());
            return null;
        try
            connection.close();
        } catch (Exception E)
            System.out.println("Unable to close.");
            System.out.println(E.getMessage());
            return null;
        return v;
    }

How to integrate RFSG driver with sampling theorem labview code

hi all,
I got the labview code of sampling theorem from labview-> find examples. How can I integrate this code with PXI system? How can I integrate the RFSG driver with labview code?

Hi Nieman,
LabVIEW 2014 should be compatible with the 9068 and the cRIO 2.1 drivers. I verified it should work as expected earlier today. Please make sure you are using the example cRIO PN-IO Device when you are moving the module over to the new target. If you are already accessing that, please navigate to this folder:
<Program Files>\National Instruments\LabVIEW 2014\Targets\NI\FPGA\cRIO\other
Please let me know if you see a CS_cRIO-PNAD folder. This folder provides all the files necessary to discover and use the module in the project. If we do not have that folder there, we will be unable to locate the module. If that is indeed the case, then it may be the driver did not install correctly.
If after finding this folder and it is still not working, please send me screenshots of the error that you are seeing and a MAX Technical Report. Thanks!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

How to load a sysdate with flat file

How do I load a sysdate with a flat file
I tried using a constant with a sysdate expression but it seems like OWB creates the ctl file with 'sysdate' as a text and not as a sysdate() function

Ola Wernere,
Two things to check:
- is the data type of the constant a date?
- did you enter 'sysdate' or just sysdate (without the ampersands)?
Other thing that might help you is generate the intermediate result in the mapping. This will show you the results you'll expect to be loaded in the flat file...
Good luck & regards
Moscowic

How to load external DLLs with C++ interface in TestStand?

Hi,
Can you please let me know how would I load external DLLs with C++ interface in TestStand?
Regards.

TestStand 3.x can only call static class C++ methods. TestStand cannot call methods on a C++ object because TestStand does not know how to enstantiate the C++ object. In TestStand 3.x, there is a online help topic called "Exporting Class Methods and Functions in Visual Studio .NET".
Scott Richardson
National Instruments

How to use intel processor with a different monitor

I'd really like to buy a 24 inch imac but I'm concerned about the gloss screen and all the problems I've read about. I'm a professional photographer but can't afford a mac pro with cinima display. I really like the 20 inch 'white' monitor on my G4 iMac. Any thoughts on how to match an intel processor with a monitor of choice?

If you buy the iMac, just buy an external display of your choice and get a Mini-DVI to VGA or Mini-DVI to DVI adapter for your iMac and plug the display into the iMac. From there you can download 3rd party apps to shut off the iMacs screen and just use the matte external display as your main monitor.
I'd recommend getting a external display that uses DVI for your photography, much better quality image.

How to load microsoft office with the disc and no drive

i have microsoft office licence with no drive. how to install with just a product key.

see > DVD or CD sharing: Using Remote Disc

How to load an applet with older version of JRE?

Hi All,
I'm writing an applet which should read the username from the user's system using System.getProperty("user.name") method. I've JRE 1.4.2 in my browser, and it's throwing a AccessControlException whenever the applet is trying to read the "user.name" system property. So, I want to load this particular applet with an older version of JRE, say JRE 1.3. I've tried various approaches like,
<jsp:plugin type="applet" code="LoginApplet.class" archive="login.jar"
jreversion="1.3" iepluginurl="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0">
</jsp:plugin>
and also tried OBJECT tag,
<OBJECT
classid="clsid:CAFEEFAC-0013-0000-0000-ABCDEFFEDCBA" codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0"
width="200" height="200" align="baseline" >
<PARAM NAME="code" VALUE="LoginApplet.class">
<PARAM NAME="archive" VALUE="login.jar">
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.3">
<PARAM NAME="scriptable" VALUE="true">
No Java 2 SDK, Standard Edition v 1.3 support for APPLET!!
</OBJECT>
I've not tried the simple APPLET tag because we can't specify a java plugin using the APPLET tag.
In both the above methods, I'm still getting AccessControlException. In Java console, I'm seeing Java Plugin as 1.4.2.
Can someone tell me is it possible to read the "user.name" system property from user's machine using Applets? If yes, how?
Thanks,
Tarun.

Applets are prevented from doing certain things - reading data is one - to maximize security. You can either add permissions to the computer that the applet is running on, or you can sign the applet.
See
http://java.sun.com/docs/books/tutorial/security1.2/tour1/step2.html
and
http://forum.java.sun.com/thread.jspa?threadID=686184&tstart=45

How to load master data with text into infoObject in BI 7.0

Hi all;
I have an infoobject 0employee ( this is for employee number ,8 character long), with medium text option.
I would like to load Employee name as a text option for employee number.
How do I load this mater data into this 0employee object,
Please help.
I did look for something similar in the forum and there are many of them, but I couldn't find anything that for BI 7.0 and really clear help for me. Sorry to ask a question that been asked before.
thanks.
Raiine

hi rainnie,
check this link t oload master data in BI 7
Re: BI 7.0 flat File extraction
as you are using SAP defined infoobject you can start from the creation of datasource.
text format for the flat file is
LANGUAGE,INFOOBJECT,TEXT
EN,0EMPLOYEE,RAINNIE
You have to create ,infopakage, transformation ,dtp for both the attribute and text.
hope this helps
cheers
Sunil

Fglrx: How to load intel driver with various options, e.g. AccelMethod

Similar Messages

Maybe you are looking for