FI Report modification in report painter

Hi,
We have few reports created through reports painter.
Now neeed to modify one of the report group to add in another account number for the P& L report.
Pl advice on the steps.
rgds
neha

Hi Neha
As you have created Reports through reports painter , then add in the reports the account number feild through Reports painter only. ( As you have created reports through reports painter )
If you have configured the reports painter then just go to change mode and add the feild or else take the help of the ABAP'er
Regards
Srinath

Similar Messages

Need to add Purchase Order field in Standard report in report painter

Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
Meenakshi

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

Requirement to add new parameter in selection in report painter report

Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
Meenakshi

Hi,
This report (and all generic reports which are based on the same library) looks on CCSS structure. This structure extracts data from totals tables. Therefore, it's not possible to add the parameter of purchase order, as it's a detail line attribute.
Regards,
Eli

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

Report painter -output parameters,Data source,Extract parameter, report

Hi expert,
1)What report painter -output parameters,Data source,Extract parameter, report mean for and what are the difference?
2)I have create new report painter and transport to Test server using T-code:GCTR and I find that the T-code always point to old report. As I had check the SE93 the D_SREPOVARI-REPORT is point to report group.Why this happen?
3) Does creation of new report or modification of the report always need to select the extraction option so that it will able to display the relected changes? Because, I have done modification on the report but it is not reflected the changes even i save until i have to create the extraction is able to display the report but every time i run the report need to select the extraction with option to choose new extract or old. Kindly advice how to save and create the report painter and save will display reflected result .
Please help

Hi BR Christian,
Thank you for the prompt reply.
I have few querys as below:
1)Do we every time create new report by copying the existing report painter need to select output parameter, data source and extract parameter in order to be able to display the new report?
2)when modify existing report painter and save it do we need to select output parameter, data source and extract parameter in order to be able to display the modify report correctly?
3) What are the different between right click copy the report inreport painter compare with create report painter with copy GRR1?
4) What are the T-code for modify the report group?
5) When I create a new report with the right click copy in GRR1 and modify the report painter column only and everything remain the same just the report name different why when execute the report it always appear in the selection screen with report button which have option button to select the 2 version of report which one is the destination report that I copy from and one is the new report? How to set the report when execute will only display the new report only without need to select the option with just new report only?
6)For transferring reports you can use GR37 (export) and GR38 (import) can be use to transport from one client to another client? What is difference between GR37 compare with GCTR?
7) If I use GR37 and GR38 it is mean no need to create the transport request which as usual we create transport se10?
we can directly import to another client ussing GR38?
8)When we create a new report with copy with the existing report with just modify the report colunm and the report name difference only what are the setting example: report,report group need to be selected to be include to export/transport to another client?
9) What are the difference between library and report group?
10) Can we set Se93 to execute only report not report group? How?
11) when using GR37 to transport it is also include the report group,library and the particular report?
12) Can I include the variable in the column header to display fiscal year which I have selected from the selection screen?
How and which variable should i use?
please help.
many thanks
Edited by: KH on Jun 18, 2011 6:52 AM
Edited by: KH on Jun 18, 2011 6:55 AM
Edited by: KH on Jun 18, 2011 7:06 AM

Report Painter using user exit U002 to create a formel variable for FI-SL

Hi,
I would like to use Report painter creating a formel variable with U002(VAR1,VAR2) for FI-SL and did following:
1. go to TCode: GS11
2. Formel: selecting U002 from Formel-Exit list and giving var1 and var2
      '#U002(VAR1, VAR2)'
3. Save
4. Erro message: U002 is not definiert.
Why???
U002 is already implementiert in
Class ZCL_IM_FI_FORMULA_EXIT
method IF_EX_G_SET_FORMULA_EXIT~EVALUATE
CASE flt_val.
    WHEN 'U002'
Could anyone help me? Thanks!
Klara Zhao

dollyb wrote:
if enter 05.2008
the volume should look like below as a vairable range.
sales volume
01.2008 - 05.2008
you want 01.2008 - 05.2008 as description , thats what your requirement right?
When 'ZTEXT2'.
DATA: ZYEAR(4)   TYPE C,
ZTEMP1(6) TYPE C,
ZLOW(14) TYPE C.
if i_step = 2.
CLEAR L_S_RANGE.
Loop at i_t_var_range into intern_range where VNAM = 'user entered variable for calmonth'.
*lets say user entered 05.2008
ZTEMP1 = INTERN_RANGE-LOW.
* now ZTEMP1 has 05.2008
ZYEAR = ZTEMP1+0(4)
* zyear = 2008
*A SLIGHT MODIFICATION TO CONCATENATION
CONCATENATE '01' ' .' ZYEAR '-' ZTEMP1 INTO ZLOW.
*SO 01. 2008 -05.2008 WILL BEN IN ZLOW
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
L_S_RANGE-LOW = ZLOW.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP
ENDIF.
use the text variable as description then u will get the required result i.e &ztext2&
HERE I DIDN'T written any L_S_RAnGE-HIGH.
Regards,
Ranganath
Edited by: Ranganath on Nov 9, 2011 9:41 AM

Report painter: Carry Forward (KSLVT not available)

Hi,
I am building a report based on table GLPCT (using report painter), in a column I need to have the carry forward and the records of the current year . Aim is to have, for a group of accounts, the total from the begining in SAP to today: Carry forward (KSLVT from previous year) + Janvier (KLS01) to KSL03 or KSL05 (depending of parameters filled in selection screen).
I don't know how to select or add the carry forward (field KSLVT).
Thanks in advance for your help.
Br,
Aymeric

Hi Sridhar,
thanks for your answer. For Library 8A2 in GR22, there is no dedicated fiedl for carry forward (KSLVT) in key figures, but there is:
- KSL-GES_JAHR (Total year)
- STOCK_ACT (Closing bal. in PrCtr-Currency)
- IST_KONZW_KUM (Cumulated actual)
I think that could help me. I will check and keep you update.
An other think is we did a profit center reorganisation (hierarchy modification), in March, and we did delete entries in GLPCA (but we did not do anything within GLPCT, tha's were balances are stored).
And it seems transaction 2KES has not been re-run after the reoarganisation, I have those points to check also.
Thanks for your help.
Br,
Aymeric

Report Painter - What is value type 10 Statistical Plan

One of my customers is running report 6o00-001 Orders: Actual / Plan / Variance. This report is displaying a plan value when, they say, no plan value has been entered. I have checked normal planning and this is correct - there is no plan value. However, when I check the report painter definition, the column in question will display value type 1 (Plan) and value type 10 (Statistical Plan).
Can anyone tell me:
- what is a statistical plan on an order?
- how can I remove the statistical plan value?
Many thanks in advance.

Hi Szymon
Thanks for your answer.
But checking the correction constructions the code do reference to the operation RKP5 and the posting are being recording with operation RKP1.
I'm checking for a similar note but with this operation but I can't find it.
Do you know if it is something like that?
Regards
This is like the record looks in the table COSP.
Client
130
MANDT
130
Ledger
0
LEDNR
00
Object number
OR000000760636
OBJNR
OR000000760636
Fiscal Year
2014
GJAHR
2014
Value Type
10
WRTTP
10
Version
1
VERSN
001
Cost Element
56650101
KSTAR
0056650101
CO subkey
HRKFT
Business Transaction
RKP1
VRGNG
RKP1
Trading Partner
VBUND
Trading Part.BA
PARGB
Dr/Cr indicator
D
BEKNZ
S
Transaction Currency
BRL
TWAER
BRL
Period block
016
PERBL
016
Unit of Measure
MEINH
* modification to post revenues - Note 604092 if coeja-wrttp = '10' and uf-activ = 'RKP5'. elseif coeja-wrttp ge '01' and coeja-wrttp le '04'. else. continue. endif. * end modification to post revenues - Note 604092
Code in correction instruction.
* modification to post revenues - Note 604092 if coeja-wrttp = '10' and uf-activ = 'RKP5'. elseif coeja-wrttp ge '01' and coeja-wrttp le '04'. else. continue. endif. * end modification to post revenues - Note 604092

Report Painter - Need help & assistance

Hi,
I have been assigned a project where I need to use the Report Painter to copy the report behind transaction code IP31 (maintenance plan costing) and modify the copy in the report painter (according to modification requests/technical specs.)
How do I make a copy for use in the report painter? How do I modify the copy? What else do I need to know?
Please help.
Thanks,
John

Hi John,
Refer these very useful links:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Regards,
KK

Report Painter - Need assistance

Hi,
I have been assigned a project where I need to use the Report Painter to copy the report behind transaction code IP31 (maintenance plan costing) and modify the copy in the report painter (according to modification requests/technical specs.)
How do I make a copy for use in the report painter? How do I modify the copy? What else do I need to know?
Please help.
Thanks,
John

Hi John,
Refer these very useful links:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
Regards,
KK

Report Painter. Form edited only display first page.

Hi All,
I have add on new column on my report painter and now the display is more than one page.
There is warning "Only the first page is displayed in the report" whenever i execute to make modification using T-code : FMEO.
There is ">" ">|" button appear on top when i run using FMEO.
But , when i try to run the form from its T-code. The report only shows the first page column.
The second page is not showing, and there is no button ">" to browse to next page as well.
Just wanna know, is there anyway i could fit 2 pages into 1 page or is there any setting that i could enable so the user could browse to second page on the form?
Thanks.

Hi..,
Onli on First page means ... this node will get executed on the first page irrespective of the page name i.e it considers onli &page& eq 1...
Suppose u have ur fist page i.e MY_FIRST_PAGE.. and in this page the data in the main window may trigger the same page as second page .. i.e if the data in the main window is not sufficient to fit in the first page it triggers the next page i.e MY_FIRST_PAGE as second page ...
so this MY_FIRST_PAGE may extend to the second page also right !! so when u use on page MY_FIRST_PAGE.. this node will get triggered if this page extends to more than one page also..
Hope u understood....
regards,
sai ramesh

Logical Formulae in Report Painter

Hi,
How do we insert a logical formula in a report painter.
For instance, "IF-THEN-ELSE".
Your early replies would be appreciated..

You would create a formula column in reports or formula variables to use in columns.
More details on link's below:
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22c6243c611d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ea043c611d182b30000e829fbfe/frameset.htm
Best Regards,
Daniel Scoz.

Error in generating a report group in Report Painter

Hi,
I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
Thanks,
Louie

There's no error when I generate the same report in a new created group as well as when I generate the existting report group without the new created report.
Information on where terminated
    The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
     in "FILL_RANGES_FROM_SET".
    The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
    The termination occurred in line 92457 of the source code of the (Include)
     program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
    of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
     the editor 924570).
Louie

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

Changing header in report painter

Hi All,
I have a requirement to change the header(column). I am using the global variable &5PY(Period/Year) in the characterictics value. So it displays an output like 06.2008. But the client needs this to be displayed as June 2008.
Kindly help me out with this.
Regards,
Karthik

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

FI Report modification in report painter

Similar Messages

Maybe you are looking for