Fiedl Validation for Warning Message not for Error Message

hi all,
we know for field validation, once it not meet the validation, it will throw out the error message and don't allow you to save the record.
But is there any way to show warning message just a note then user can continue the operation?
Thanks
Amanda

hey ady,
Is there any authoritative explanation from oracle which mention this part? As I need to follow it to our client which explain this is impossible.
Thanks
Amanda

Similar Messages

  • Date validations for fiscal year

    My selection screen has select option for date in that it shold take financial year i.e from april to march.
    suppose if date-low = dec2008 date-high = feb2008. how shld i write the code for this.validations etc. it should not give error saying lower value is higher than high value.

    Hi,
    Anyhow you need to be careful with the validations of Fiscal year, i used the below code in one of my reports which gets Date and fiscal year as inputs;
    Data : fisYr1(4) TYPE n, fisyr2(4) TYPE n.
    CLEAR : fisyr1, fisyr2.
    IF S_date-low+4(2) LE 3.
      fisyr1 = s_date-low+(4) - 1.
    ELSE.
      fisyr1 = s_date-low+(4).
    ENDIF.
    IF S_date-high+4(2) LE 3.
      fisyr2 = s_date-high+(4) - 1.
    ELSE.
      fisyr2 = s_date-high+(4).
    ENDIF.
    IF fisyr1 NE fisyr2.
      invalid_date_Range = 'X'.
    ELSEIF fisyr1 NE p_fisyr.
      invalid_fiscal_year = 'X'.
    ENDIF.
    Regards
    Karthik D

  • When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian Store. You must switch to the US store before purchasing."  I am in the US how do I switch?

    When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian store. Your must switch t the US store before purchasing. I am currently in the US on wi-fi. How do I switch

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3. Tap on your Apple ID
    4.Tap "View Apple ID"
    5. Enter your user name and password.
    6. Tap "Country/Region."
    7. Tap "Change Country/Region"
    8. Select the country/region where you are located.
    9. Tap "Done".
    Note: If the change doesn't take effect, sign out of account and sign in again.

  • When i attempt to download a 'free' app from the app store error message comes up: "Account Not in this store- your account is not valid for use in the US store.  You must switch to the Guyanese store before purchasing."

    when i attempt to download a 'free' app from the app store error message comes up: "Account Not in this store- your account is not valid for use in the US store.  You must switch to the Guyanese store before purchasing."

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you will be located.
    8. Tap "Done".

  • When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state".  What is this?

    When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state".  What is this?

    See if this post by turingtest2 fixes it : key not valid for use in specified state

  • Key not valid for use in specified state error message

    I did the update for my iPhone and also tried to update iTunes. I kept getting an error message of "key not valid for use in specified state" error message. I thought that if I uninstalled iTunes and re-installed it, that it would be fine. I'm still getting the message and now I don't have iTunes. When my phone updated, I couldn't download anything/backup my phone to iTunes. Please help. Thank you in advance.

    For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
    For further problems installing iTunes see Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Consistent Error Message:  Key not valid for use in specified state

    For several years I have been trying to use iTunes.  Without success, I decided to try to reinstall the program and now I am getting the above error message.

    It seems we may have a more targeted solution. Based on posts in the thread  key not valid for use in specified state I've just added the following to the user tip.
    For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
    tt2

  • While trying to download update 11.4 for i tunes i received an error message "key not valid for use in specified state" what does that mean ? anyone please help ?

    while downloading update version 11.4 an error message appeared "key not valid for use in specified state " help ?

    See if this post by turingtest2 fixes it : key not valid for use in specified state

  • Error Message - "Time Interval is not valid for dummy activities"

    Friends,
    I am trying to create a planned order on a resource at a plant. However it shows up an error message.
    An application program called an LCA routine. The following error
    occurred:
    Time interval is not valid for dummy activities. Probable causes
    error are an extremely long processing duration or times that li
    outside the time interval (1.1.1970 + 30 sec, 1.1.2038 - 1 sec).
    Could anyone help pme out with this,
    Thanks in advance.
    -A

    Hi,
      Please check the control key  and activity type  in routing.
    Thanks,
    DV

  • I am getting an error message "key not valid for use in specified state"

    I am trying to install adobe photoshop elements 12  I just bought and when it says install I click the button and up pops " key not valid for use in specified state" any body know what to do.

    Hi,
    You can try to mov the contents of "C:\Users\%USERNAME%\AppData\Roaming\Microsoft\Crypto\RSA" to another location.
    Try to run the installation again and check if it works.
    Additional information:
    ERROR: "key not valid for use in specified state" when updating to Lightroom 5.6 in Win8.1
    key not valid for use in specified state | Apple Support Communities

  • ERROR: "key not valid for use in specified state" when updating to Lightroom 5.6 in Win8.1

    While doing a routine update from Lightroom 5.5 to v5.6 in Win 8.1, the installation halted at the start of the installation with the vague error message, "key not valid for use in specified state".  Although v5.5 was working just fine, the install routine deleted the v5.5 application files.  I rolled back to the previous system restore point (set just prior to the install) and recovered the executable files.  However, now the 5.5 files won't open the default catalog, none of the backups, or even create a new catalog.
    As v5.x was purchased as an update to v4.x, I've tried to reinstall the original Lightroom v4.x app from the factory disk.  I get the same error.
    Suggestions?
    Thanks. Dan

    I have a similar problem to Dan. while doing a routine upgrade from Lightroom 5.5 to 5.6 I got the
    : "key not valid for use in specified state"
    error and now Lightroom has completely disappeared. I've tried to uninstall, but there is nothing to uninstall. Going back to try to install the original 5.4 just results in the same error.
    A problem may have been that I closed Lightroom when the upgrade started to download. It then re-opened again when the install was halfway through., I assumed that was an error and closed it. just after that the error first appeared in the installer.
    I still had an older version of lightroom 4 installed. I've uninstalled it, and that didn't make any difference.
    I've also tried removing anything in the registry left over from the old installs and that didn't help either.
    Any suggestions?
    CHeers, Angus

  • When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation. --- " cache File Read error"

    When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation.
    Also during installation screens an error window is displayed saying "cache File Read error -- Could not read ProductKey entry from the cache file "

    Hi,
    I also get the following message:
    "Could not read ProductKey entry from the cache file"
    I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
    Do you have a solution for this problem? Did you finish the installation?
    Christian

  • I can't get dvds to play "There was an initialization error. A valid video device could not be found for playback. [-70017]  Anybody know how to resolve this?

    I can't get dvds to play and, instead, get "There was an initialization error.  A valid video device could not be found for playback. [-70017]"  I went in for a Genius appt Friday and it played for the tech...but now I'm back home (one and a half hours from the store) and I'm getting the error message again when I try to load a dvd.  Any recommendations?

    Hello, try this...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Reboot... any change?

  • ITunes 7.0.2 Error - ""This action is only valid for products..." message

    Hi,
    I see other folk are having problems upgrading to iTunes 7.0.2 but I've had a read of some recent posts and can't find a problem quite like mine...
    OK, so I decided to say yes to the "upgrade to iTunes 7.0.2?" prompt when I turned iTunes 7 on this afternoon. I followed all the prompts correctly and allowed the computer to re-start when installation was complete.
    My iTunes "i" icon has disappeared from the QuickLaunch bar, and has been replaced by a Windows application blue and white square-window icon. When I click on it to run iTunes I get an error message prompt:
    "This action is only valid for products that are currently installed."
    I click "OK" and then nothing happens, iTunes (niether 7 nor 7.0.2) does not load and there is no way to get into iTunes. Going through the menu bar results in the same error message.
    I am not sure what to do. I don't want to wipe iTunes and start again because I have quite a few purchased tracks that may be lost, and I doubt I would be able to get them back.
    Does anybody have any advice?
    Many thanks.
    (I have tried playing a QuickTime movie file and that works fine).
    QuickTime 7.1.3 seems to be working fine.

    Remove the shortcut that is in the QuickLaunch bar.
    Go to C:\Program Files\iTunes\ and make a new shortcut for iTunes.exe and put it in the QuickLaunch bar.
    That should resolve the issue.
    Hope this helps,
    Nathan C.

  • XML Parser Message: Element series is not valid for the content model

    Hello,
    I work with FrameMaker 8 and DITA.
    I change the element prodinfo in the topic.edd from:
    General rule: (prodname), (vrmlist), (brand | series | platform | prognum | featnum | component)*
    to:
    General rule: (brand | series | platform | component)*
    When I import the element definition to the template everything is okay.
    When I insert the elements metadata, prodinfo, brand, series, platform and component into a topic I get the XML Parser Message that the element brand is not valid for the content model (prodname,vrmlist, ((brand|series|platform|prognum|featnum|component))*).
    When I delete the element brand in the topic I get the XML Parser Message that the element series is not valid for the content model (prodname,vrmlist, ((brand|series|platform|prognum|featnum|component))*).
    I change the element prodinfo in the topic.edd to:
    General rule: (brand)?, (series)?, (platform)?, (component)?
    ...and get the same Parser Message.
    I do not understand that. Is not it allowed to change the EDD this way without changing the DTD?
    With kind regards
    Nina

    Hi Nina...<br /><br />In general, the EDD and DTD need to sync up. You can remove elements from an EDD element definition's general rule, as long as the resulting elements are still valid to the DTD. But if changing a general rule creates an invalid structure, you'll need to also change the DTD to allow the revised structure.<br /><br />With DITA, it is common to remove inline elements from block-level elements. For example, you might want to remove the <msgblock>, <msgnum>, and <msgph> elements from the general rule of the <p> element .. this can be done easily in the EDD and the resulting structure remains valid with the DTD.<br /><br />However, what you're doing leaves the <brand> element as a child of <prodinfo> .. which is invalid. You'll get these errors when saving a file, since this is when the file is validated against the DTD.<br /><br />I do not recommend modifying the structure in such a way that requires you to modify the DTD. If you really need to do this, then you should consider making a specialization to support your revised model.<br /><br />I hope this helps.<br /><br />Cheers and Happy New Year!<br /><br />...scott

Maybe you are looking for