Field alignment issue on a page

Hi -
I am trying to align the fields on an apex page but not able to find a way.
Basically I have 2 rows of columns shown on an apex page.
First row has 4 fields (Text box items):
And second row has 2 fields (Text box items)
1st row > Name|---------------------------| Address|-----------| Ph1|-------------------| Ph2|-------------------|
2nd row> Indicator|----| Active|------|
So I want the second row fields to be under the first row's first field. I am trying to do that using START_TBL and STOP_TBL but the second field (Active field) from the 2nd row is always showing after the end of the 1st row's first field's (Name field) length on the 2nd row.
Desired:
1st row > Name*|---------------------------|* Address*|-----------|* Ph1*|-------------------|* Ph2*|-------------------|*
2nd row> Indicator*|---|* Active*|----|*
But getting:
1st row > Name*|---------------------------|* Address*|-----------|* Ph1*|-------------------|* Ph2*|-------------------|*
2nd row> Indicator*|---|* Active*|----|*
Please share your expertise.
Thanks.

Thanks so much osgood... a really strange one as those parts of the page are locked out (i.e. controlled by the template only), so to resolve the issue I've created a new page altogether, copied and pasted the index code in, and resaved as the index.html file. It's now working again as desired. Thanks again!

Similar Messages

Field Alignment issue

HI All,
I have a view which is being used at 2 places in the same application.At one place all the fields of that view are in enabled while at other place disabled. if i align the fields at 1 place ,alignment is getting changed at the other place. I think this is because of enabling and disabling the same fields.
Can any one suggest me some work around for this?
Regards,
Lakshmi.

Hi,
For each set of the Input fields are you using the Transparaent containers(TCO)
How are using these TCO. How are you aligning these Input fields.
Are all the Input fields inside One TCO. Have you set the layout for TCO.
For the Root you set as Flow and for the TCO as Matrix itself. In this have the Input fields. for the Labels give as Matrixhead and Input fields as Matrix Data.
Regards,
Lekha.

Alignment issues in CF pages

I have 2 pages in question. 1, located at
www.salleboise.com/club_tournaments.cfm and the other at
http://www.salleboise.com/tournament.cfm?tid=1&f=1&e=1
My question is this. Why does the text at the top of the page
differ so
much in positioning? I don't think I've missed anything as
far as <p> etc
codes from 1 page to the other.
Can anyone provide me with a suggestion on this one? I'm
noticing this
within IE7 on WinXP.
Thanks!

So, is there any way to specify in the CSS files that if IE7
is detected, to
do something different than for the IE6 version, so the
formatting looks the
same for all IE browsers?
"mohadi" <[email protected]> wrote in message
news:fk6d0j$ctl$[email protected]..
>I looked at it on IE6 and both pages look identical. Must
be an IE7 issue

ALV Grid - Alignment Issues in TOP OF PAGE.

Hi,
We have a requirement to right align text in the report header.
We are using REUSE ALV GRID DISPLAY, but using TOP-OF-PAGE event - the whole text is left aligned.
I tried using Class CL_DD_DOCUMENT which solved the alignment issue, but I am not able to see the header while printing/downloading to excel.
I want the header to be available while downloading/printing the list. Any suggestions?
Thanks in advance,
Harveen.

Hi
The ALV download only the grid into the file, so not the data you're writing in TOP_OF_PAGE event.
If you need to do that, you should create an your own buttom to download the file.
Max

Adding Fields to People Search Results Page

Hi
Working in SharePoint Online, I've been able to add a few fields to the People Search results page successfully:
Organization
Office Locator
Office Location
Work Phone
Mobile Phone
Home Phone
Work Email
All of the above fields are working and display on the People search results page.
I tried to add these and they simply do not display. There is no error:
University Email
Assistant
Calendar/Scheduling
I set them up the same way. I created the Property in the User Profile area. I then populated the data for each user. I then added the property as a Managed property (search schema) linked to the Crawled property from the People category.
Made sure that they were query able, retrievable, searchable, etc. Then I edited the People Search code and then I waited over the weekend for the search to pick them up. I came into work this morning and they still do not display. Here is
my code, just in case I missed something. Thanks.
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>UIF People Item with Work Phone</title>

</head>
<body>
<div id="Item_Person">

<div id="_#= $htmlEncode(container_id) =#_" class="ms-srch-people-outerContainer ms-srch-resultHover">
<div id="_#= $htmlEncode(itemId) =#_" name="Item" class="ms-srch-people-item" onmouseover="EnsureScriptParams('SearchUI.js', 'HP.Init', event, '_#=$scriptEncode(itemId) =#_', '_#=$scriptEncode(hoverId) =#_', '_#=$scriptEncode(hoverUrl) =#_');" onmouseout="EnsureScriptParams('SearchUI.js', 'HP.Hide');">
<div id="_#= $htmlEncode(hoverId) =#_" class="ms-srch-hover-outerContainer"></div>
<div id="UserPersonaContainer">
<div id="UserPersona">
<div id="_#= userPersonaId =#_"></div>
</div>
</div>
<div id="UserInfoContainer">
<div id="ContactInfo">
<div id="NameField">

<div id="NameValue" class="ms-srch-ellipsis ms-textLarge">
<a clicktype="Result" id="NameFieldLink" href="_#= encodedPath =#_" title="_#= encodedName =#_">_#= displayName =#_</a>
</div>
</div>

<div id="JobTitleField">

<div id="JobTitleValue" class="ms-srch-ellipsis" title="_#= encodedJtitle =#_"> _#= displayJtitle =#_ </div>
</div>


<div id="DepartmentField">

<div id="DepartmentValue" class="ms-srch-ellipsis" title="_#= encodedDept =#_"> <b>_#= displayDept =#_</b> </div>
</div>


<div id="Organization">

<div id="OrganizationValue" class="ms-srch-ellipsis" title="_#= encodedorg =#_"> _#= displayorg =#_ </div>
</div>

<hr>

<div id="OfficeLocator">

<div id="OfficeLocatorValue" class="ms-srch-ellipsis" title="_#= encodedolocator =#_"> <b>Office Locator:</b> <a clicktype="Result" id="NameFieldLink" href="_#= ctx.CurrentItem.OfficeLocator =#_">_#= ctx.CurrentItem.OfficeNumber =#_</a></div>
</div>


<div id="OfficeBaseLocation">

<div id="BaseOfficeLocationValue" class="ms-srch-ellipsis" title="_#= encodedbolocation =#_"> <b>Office Location:</b> _#= displaybolocation =#_ </div>
</div>
<hr>


<div id="WorkPhone">

<div id="WorkPhoneValue" class="ms-srch-ellipsis" title="_#= encodedwphone =#_"> <b>Office Phone:</b> _#= displaywphone =#_ </div>
</div>


<div id="MobilePhone">

<div id="MobilePhoneValue" class="ms-srch-ellipsis" title="_#= encodedmphone =#_"> <b>Mobile Phone:</b> _#= displaymphone =#_ </div>
</div>


<div id="HomePhone">

<div id="HomePhoneValue" class="ms-srch-ellipsis" title="_#= encodedhphone =#_"> <b>Home Phone:</b> _#= displayhphone =#_ </div>
</div>

<hr>

<div id="WorkEmail">

<div id="WorkEmailValue" class="ms-srch-ellipsis" title="_#= encodedemail =#_"> <b>Foundation Email:</b> _#= displayemail =#_ </div>
</div>


<div id="UniversityEmail">

<div id="UniversityEmailValue" class="ms-srch-ellipsis" title="_#= encodeduniversityemail =#_"> <b>University Email:</b> _#= displayuniversityemail =#_ </div>
</div>

<hr>

<div id="Assistant">

<div id="AssistantValue" class="ms-srch-ellipsis" title="_#= encodedassistant =#_"> <b>Assistant:</b> _#= displayassistant =#_ </div>
</div>


<div id="CalendarScheduling">

<div id="CalendarSchedulingValue" class="ms-srch-ellipsis" title="_#= encodedcalendarscheduling =#_"> <b>Calendar/Scheduling:</b> _#= displaycalendarscheduling =#_ </div>
</div>

<hr>
</div>

<div id="MoreInfoShort">

<div id="ResponsibilitiesValue" class="ms-srch-ellipsis">
<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_Responsibilities) =#_ </span>
_#= encodedVal =#_
</div>


<div id="SkillsValue" class="ms-srch-ellipsis">
<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_Skills) =#_ </span>
_#= encodedVal =#_
</div>


<div id="PastProjectsValue" class="ms-srch-ellipsis">
<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_PastProjects) =#_ </span>
_#= encodedVal =#_
</div>


<div id="InterestsValue" class="ms-srch-ellipsis">
<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_Interests) =#_ </span>
_#= encodedVal =#_
</div>


<div id="SchoolsValue" class="ms-srch-ellipsis">
<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_Schools) =#_ </span>
_#= encodedVal =#_
</div>


</div>


<div id="MoreInfoLong">

_#= encodedVal =#_


<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_Skills) =#_ </span>
_#= encodedVal =#_


<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_PastProjects) =#_ </span>
_#= encodedVal =#_


<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_Interests) =#_ </span>
_#= encodedVal =#_


</div>


<hr class="ms-srch-people-item-separator" />
<div id="SelfSearchInfo">
<div id="Heading">
<a id="EditProfileLink" href="_#= $urlHtmlEncode(ctx.CurrentItem.EditProfileUrl) =#_"> _#= $htmlEncode(Srch.Res.item_People_EditProfileLink) =#_ </a>
</div>
<div id="Frequency">
<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_SelfSearchFrequency) =#_ </span>
<ul id="FrequencyCard">
<li id="MonthlyViews">

_#= encodedVal =#_
</li>
<li id="DailyViews">

_#= encodedVal =#_
</li>
</ul>
</div>

<div id="Keywords">
<span id="FieldTitle" class="ms-soften"> _#= $htmlEncode(Srch.Res.item_People_SelfSearchKeywords) =#_ </span>

_#= encodedVal =#_

</div>


<div id="LastModifiedTime">
<span class="ms-textSmall">_#= $htmlEncode(Srch.Res.item_People_LastModified) =#_</span>
<span id="_#= encodedLastModifiedTimeId =#_" class="ms-textSmall ms-srch-ellipsis"></span>
</div>

</div>

</div>
</div>
</div>


</div>
</body>
</html>

Hi,
According to your post, my understanding is that you have an issue about adding fields in people search results page.
Per my knowledge, there is no issue in your steps, and the issue may be related to the search crawl in SharePoint online.
For SharePoint server on-premise, we can start the search full crawl, however, for SharePoint online, we could not start the search full crawl manually.
You can wait for some time to complete the search full crawl in SharePoint online, then check whether it works.
As this is the forum for SharePoint server on-premise, I’m not familiar with the SharePoint online search crawl, for this issue, I recommend you can post a new question in the forum for Office 365/SharePoint online.
http://community.office365.com/en-us/forums/154.aspx
More experts will assist you, then you will get more information relation to SharePoint Online.
Thank you for your understanding and support.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

More alignment issues

hi,
I'm hardly an expert - but I have made great strides because of helpful people who throw me a hint.
my site: www.kirarmerica.com
I still have JUST a FEW alignment issues. I like to have everything centered, so now I am just down to my spec sheets.
I know that they might not be configured ALL the same, but I am hoping I can change a few things
please look at Kira America | Products
click on any spec sheet and you will see that the headers menu and sometimes the footer stays centered, but the spec info jumps to the left of the page.
I've found the correct .css to edit. but I cant quite figure out how to align the columns vertically on the page.
for example if I put a margin on #right_column it put it in the right spot, but then the rest of the content jumps all over the page.
any hints would be helpful!

These changes will center content in white area
#container h1, #container h2, #container h3, #container h4, #container h5, #container h6 {
    border-bottom: 1px solid #DEDACB;
    padding-bottom: 8px;
    text-align: center;
.excel214 {
    border: medium none;
    color: #000000;
    font-family: Calibri,sans-serif;
    font-size: 11pt;
    font-style: normal;
    font-weight: 400;
margin-left: auto;
    margin-right: auto;
    padding-left: 1px;
    padding-right: 1px;
    padding-top: 1px;
    text-decoration: none;
    vertical-align: bottom;
    white-space: nowrap;

Very urgent Decimal issue in ADF page

Hello friends,
i have an issue in ADF page which was weight field, issue has below.
1) weight filed was validated that without entering 5 digit value in filed, example suppose i enter 12345 in weight it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but it is let me to go next field and submit button. it is happening only in create page only.
2)but when i go to detail page , same weight fild is populated there - i enter invalid weight something 12345, it is showing that in small dialog box -weight value should be 0 to 9999.999 only. but here let me not go to another filed until i ENTER valid value.
create page weight filed need to work same as detail page.i am new to ADF development, how to check where this validation done and how to fix this.
very very urgent.
Thanks,
vamshi.

If you use ADF BC, open the entity and choose "Business Rules". You can then add validation rules such as range limits under the attributes. It is usually best practice to include validation rules in the entity (model layer), this way they apply automatically to all view objects based on the entity and you are guaranteed to have only valid values in the database. (View layer validation may have its place as a convenience supplement.)
Read more about business rules in the developer's guide: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcvalidation.htm

Field alignment gets locked to top-left for last field on subform

Periodically I experience a problem with the last field on a subform. Whatever field alignment I set using Output Designer, when central pro processes the data the and aligns the data topleft. This is a particular problem when outputing financial data which I need to right align because the number of digits before the decimal point is variable. I usually work around this by adding dummy fields at the end of the subform, but this does not always fix it.
Any ideas as to what causes this? (so that I can avoid it)
Or any software fixes for it?
Are there any tools for examining the content of the .ifd or .mdf files, as this may through light on the cause.
Adobe Central Pro Output Server version = 5.5 (also affects 5.4)
Presentment target = PDF
Windows version = 2000 professional
Many thanks in advance, Stephen

Thank you for the feedback.
I have changed a some of the field positions/widths and changed the alignment from top-right to middle-right and the problem seems to have gone away.
I could not see a way of determining the printable regions of the page. The output I am crfeating is a PDF file.
I am still concerned that I don't understand the problem well enough to avoid it in the future.
Stephen

Alignment Issues between dreamweaver and browser

Hi
Hoping someone can help, i'm trying to learn how to make
better sites with advanced tools like apDIV's but seem to be
running into an alignment issue. When I make the html file in
dreamweaver I seem to have to off set the images and div tags
inorder for the site to show up aligned properly in firefox,
explorer, etc. I'm thinking there might be a problem in the actual
code causing this but am not good enough yet to find it or the
problem, any ideas or guidence would be greatly accepted. below if
the links work is the difference I see between dreamweaver and when
its launched in a browser.
DreamweaverScreen
BrowserScreen

> over a centered frame
You are not using frames - that's a table.
Yes - there's a way to do this, but it will involve your
working in code.
Make your page left aligned by removing any centering.
Then position your layer so that it is properly located over
the table.
Change this -
</head>
to this -
<style type="text/css">
#wrapper { width:760px; margin:0 auto;position:relative; }
/* 760px will display on an 800px screen maximized browser
window without */
/* horizontal scrollbars. */
</style>
</head>
(you may need to adjust this width so that it's consistent
with the width of
your centering table)
change this -
<body ...>
(the ellipsis represents any other attributes that might be
mentioned in the
body tag, and SHOULD NOT BE INCLUDED EXPLICITLY!)
to this -
<body ...>
<div id="wrapper">
and this -
</body>
to this -

</div>
</body>
and see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vinx21" <[email protected]> wrote in
message
news:ge9t3e$92s$[email protected]..
> thanks for the help osgood, I see now what my problem is
and am just
> wondered
> if there was a way to place the absolute layer over top,
in the right
> position,
or will have i have to remake one of the elements a
> different way???
>
> thanks again, dave
>

Font & box alignment issues in form building

Hi There,
I am trying to update our application page however I did not orginally build the page and I have very little experience with forms.
What I need help with is:
1) How can I increase the font size for all field names thoughout the form e.g. First Name, Middle Name etc, House #, Suburb/State, Current Employer etc etc ?
2) Some fields display out of line with one another e.g. 'Martial Status' and '# of Dependents', 'Years' and 'Months'. These fields line up fine in DW but obviously do not display correctly - how can I fix this?
These issues appear to be only happening in IE - I currently use IE8 and I only assume the issues will be the same in previous versions, if not worse.
The link for the form is: http://www.lombardfinance.com.au/dev/card_newsite.html
If someone can help me that would be much appreciated!!
Thanks!

1) How can I increase the font size for all field names thoughout the form e.g. First Name, Middle Name etc, House #, Suburb/State, Current Employer etc etc ?
Why do you have a <sub> tag around each <label> tag's contents?
<label for="firstName"><sub>Applicant 1<br />First Name:*</sub></label>
Removing that would help make the label contents larger, and it could be that this would be all you need.
With regard to the layout question, I'd like to see you fix these validation errors before tackling that. I feel it's wasted effort to try to troubleshoot layout issues on a page with invalid HTML....
http://validator.w3.org/unicorn/check?ucn_uri=http://www.lombardfinance.com.au/dev/card_ne wsite.html&ucn_task=conformance

Updating a custom field in ItemCheckingIn event of pages library of publishing portal.

I have Pages Library of publishing web. In this pages library I have a content type that has a few custom fields.
When ever a page is created and checked in in this library I want to send out an update email to users. The function that sends the email returns an Id to track the mails sent.
I want to store this id to the one of the custom fields of the content type attached to this pages library.
If I use item checkingIn event then list item is available but when i update it gives error probably due to the fact that in synchronous item the item is not yet created.
If i use CheckedIn event then it executes after the file is checked in , in that case it gives error asking me to check out the file first and the update the custom field.
Please suggest the best way to update a field in document library in synchronous event handlers or in asynchronous event handlers in the simplest of ways.
I do not want to check out the file in asynchronous event programatically for just one field and then re check it in.

Hi,
According to your post, my understanding is that you want to update list item in ItemCheckedIn method in Event Receiver.
The following code snippet for your reference:
/// <summary>
/// List Item Events
/// </summary>
public class EventReceiver1 : SPItemEventReceiver
/// <summary>
/// An item was checked in.
/// </summary>
public override void ItemCheckedIn(SPItemEventProperties properties)
SPListItem item = properties.ListItem;
item["Title"] = "Test1";
item.Update();
If the issue still exists, I suggest you debug your code or provide your code for further research.
http://sharepoint-kings.blogspot.com/2013/02/debugging-event-receivers-in-sharepoint.html
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Colour alignment issues with CP1515n

I'm having some colour alignment issues with my Color Laserjet CP1515n. Lately, I've noticed that the 3 colours go out of alignment from the middle towards the right of my printouts. Alignment at the left towards the middle half of the page is ok but gets progressively worse towards the right side of the page.
Nothing in the user interface allows me to reset the colour alignment. What can be the cause of this and what's the remedy? This printer is slightly over a year old and has only just gone through its first set of toner cartridges.

I am also having alignment issues to the same nature as the post below. I have just replaced the Black, Magenta and Cyan toners. After doing this the alignment goes out of register from left to right (left edge fits right edge all colours are out of fit by 2mm).
I have also found nothing in any manuals as to how to adjust or fix this problem. This is the second time I have replaced these colours. I have re-calibrated and taken the cartridges out several times but it is still the same.
Any advise would be helpful. As it is at the moment the printer is unusable for my job and it's the only one I have.

Printing alignment issue

Hi,
I am using inDesign CS3 on Windows XP. On the computer screen, my layouts look exactly how I want them to. However, when I print my document, the alignments are not correct. In particular, the master page spread seems not to line up with marks that I have made on individual pages. How can I fix the alignment issue?
The printer is a HP Laserjet 9000 dn -- an industrial strength behemoth.
Thanks,
Liat.

The master page content seems to be off by a millimeter or so when I print.
The "marks" I've drawn on the actual pages are lines and rectangles. These lines and rectangles are drawn so that they fit within certain areas of the master page content. When I print, the lines and rectangles are 1-2 millimeters off from where they are supposed to be with respect to the master.
In particular, my master page contains a theater seating chart. On the individual pages themselves, I "highlight" a certain seats in the chart by drawing a gray rectangles over these seats. When I print, these rectangles are shifted 1 mm to the left, and no longer fully "cover" the seats they are supposed to, making my publication look a bit sloppy.
Besides this 1-mm alignment issue between the master content and the content on individual pages, all other content is printing just fine.
I do not think that this is an issue of the page position in the print dialog box, since that would make a drastic alignment problem, not one as small as I am getting.
I thought about converting to PDF, but: I am printing my document as a booklet. I am working with 2-page spreads, each page being 8.5 by 5.5 inches. I have been using inDesign's "print booklet" function (2-up saddle stitch) to print my double-sided booklet. I have not yet figured out how to either (1) print PDFs as booklets or (2) export my inDesign document to PDF so that all the booklet-printing properties are preserved (i.e. page order, etc.), so that I can simply print the PDF normally.
I think you're right that PDF might be the way to go, since usually PDF's talk to printers better than inDesign seems to.
Thank you,
Liat

Prompting issues on dashboard pages

I have a 3 page dashboard that conform to a form of hierarchy
-- Page one summarises the highest level of date by month (based on a dashboard prompt)
-- Page two shows the middle level of data based on a prompt from Page one
-- Page three shows the lowest level of data based on a prompt from Page two
For example:
Page 1 shows Car sales by Maker (Ford, Chrysler VW etc), clicking on one of these will take you to Page 2 which shows the sales per Model (Focus, Fusion, Taurus etc) and clicking on one of these will take you to Page 3 which shows the sales by Package (S, SE, SES, SEL etc).
This all seems to work fine, the date selected on Page 1 is passed to the other pages. The problem arises when I go back to Page 1 after drilling-down to either Page 2 or 3. Returning to Page 1 after this means that the chart & table there only shows data for the Maker for the Model and Package selected on Pages 2 & 3.
The only prompted field on Page 1 is the "month" field that takes its prompt from the dashboard prompt, I can't see why this is picking up selections from the drill-down & not just returning the full data set. Can anyone help?
Edited by: user8090364 on Apr 14, 2009 3:19 AM
Hmmm, further Googling suggests it may be an issue with Dashboard Page State Persistence in config.xml. Has anyone else come across this?

Hi John
They're column based & each page has a seperate report. I hadn't protected the filters on the top level report - I have now & that seems to have sorted it.
Thank you, that was really bugging me. We're still in UAT & all these little niggles that aren't in the manuials are cropping up.
regs
Neil

Field in Alv Top-of-page

How to pass field in Alv Top-of-page
Edited by: Deepak Mathrani on Aug 12, 2008 12:40 PM
<THREAD LOCKED. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] to discover why>
Edited by: Mike Pokraka on Aug 12, 2008 2:58 PM

Hi
sample program
*& Report ZNNR_ALVSAMPLE
REPORT znnr_alvsample NO STANDARD PAGE HEADING.
TABLES:     ekko.
TYPE-POOLS: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      gd_tab_group TYPE slis_t_sp_group_alv,
      gd_layout    TYPE slis_layout_alv,
      gd_repid     LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
              I.e. Field type may be required in-order for
                   the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
fieldcatalog-do_sum      = 'X'.
fieldcatalog-no_zero     = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
fieldcatalog-EDIT = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
gd_layout-totals_only        = 'X'.
gd_layout-f2code            = 'DISP'. "Sets fcode for when double
                                        "click(press f2)
gd_layout-zebra             = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text       = 'helllllo'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'(001) "see FORM
           i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
           IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
           is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform.                    " DATA_RETRIEVAL
Form TOP-OF-PAGE                                                 *
ALV Report Header                                                 *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
      wa_header type slis_listheader,
      t_line like wa_header-info,
      ld_lines type i,
      ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
               sy-datum+4(2) '.'
               sy-datum(4) INTO wa_header-info.   "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
                    into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
           i_logo             = 'Z_LOGO'.
endform.

Field alignment issue on a page

Similar Messages

Maybe you are looking for