Field is used on multiple views

I have the following situation:
1 field (i.e. MARA-MFRPN) is present on the Basic 1 view and the Purchasing view. Is there a possibility to have this field visible and changable in the Basic 1 view and only visible on the Purchasing view? The reason behind this, is that there will be authorization on material status. One person is only allowed to fill Basic 1 & 2 and will fill in the MFRPN filed, one other person will fill in the Purchasing view and is not allowed to change the MFRPN field.
Thanks for your suggestions.

Hi ,
What is name of this field you are refering ?
Thanks
Dipak

Similar Messages

Method that can be used for multiple views

Hello,
I've got three tables: Person, Company, Adress. Each Person/Company can have mulitple adresses. So Adress has a foreign key to Person and Company. In ADF BC I've created two views for Adress: PersonAdressView, that has PersonView as Master and CompanyAdressView that has CompanyView as Master. Now I want a copy functionality, that validates and copies a given Adress row. I want this functionality for PersonAdressView and for CompanyAdressView. Is there a possiblity to write generic code that can do this?
The logic that works on CompanyAdressView/CompanyAdressViewRowImpl and on PersonAdressView/PersonAdressViewRowImpl is the same. But the java datatypes are in so many lines different that it is almost impossible to use common code. Is it possible to resolve this problem with common base classes? If it is, I have no idea how to create them.
regards
Jörg

Hi,
create a custom version of ViewObject (extending ViewObjectImpl) and base the two ViewObjects on your custom VO (extend).
Frank

To view variants used in multiple reports

Hi all,
Is there any function module or report or transaction to view the variants used in multiple reports?
Our current process is to go into SM37, pull up the individual user, input the date, open the list of reports, u201CGo tou201D the variant and review the information.
Please help me to get the details of variants ?

Hi manju,
From table VARID you can find the list of reports using the same variant by passing the name of variant in field VARIANT.
To get the details about the variant you can use the FM RS_VARIANT_CONTENTS.
Here you can get the list of PARAMETERS, SELECTOPTIONS and there values also.
Regards
Dillip sahoo

Open Transaction MM01/MM02 with multiple views using CALL TRANSACTION

Hi All,
I want to open MM01/MM02 with multiple views using call transaction but in the parameter ID for Views (MMX) I can pass status of only one View.
SET PARAMETER ID 'MAT' FIELD v_mat.
SET PARAMETER ID 'VKO' FIELD ' '.
SET PARAMETER ID 'MTA' FIELD IT_MOFF-MTART.
SET PARAMETER ID 'MTP' FIELD IT_MOFF-MBRSH.
SET PARAMETER ID 'VTW' FIELD ' '.
SET PARAMETER ID 'BWT' FIELD ' '.
SET PARAMETER ID 'LGT' FIELD ' '.
SET PARAMETER ID 'MXX' FIELD 'K'. "Sales View
SET PARAMETER ID 'MM5' FIELD ' '.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN
Please suggest.
Regards,
Divya

I do not exactly understand what you mean, but what i already did:
- I checked that the fields are from the same type.
- KUNNR is initialized! I already had a look to the debugger, that's why i'm posting this in this forum.
any more comments on this ?
maybe i have to change anything in the z-transaction. Btw, this is what the parameter looks like in the transaction:
SELECTION-SCREEN BEGIN OF BLOCK Debitoren WITH FRAME TITLE text-001.
PARAMETERS pkunnr type kna1-kunnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK Debitoren.
Edited by: Sven Delangle on Sep 3, 2010 2:42 PM

Creating multiple graphs dashboard in Crystal XI using a single View from MS SQL Server 2005

How to create multiple graphs dashboard in Crystal XI using a single View from MS SQL Server 2005?
I need to use Crystal XI and create a dashboard which shows some sales data and stuff, multiple graphs on a single screen.
My tech team says they can display one graph per page but not 4 graphs on the same page as it uses a common view from SQL Server 2005.
How to manage this? Can we call in multiple views / graphs in the same page? Say 4 graphs on the same page?
We use ASP or .NET for calling crystal reports into the App.
Regards,
Akshay.
INDIA

Have you tried creating multiple sections, putting each graph in a separate section and then underlaying the sections so they appear next to each other?

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

Passing one parameter to multiple views

Is this possible? I would like to pass one parameter, a date field, to multiple views. I cannot use it in the record selection, because my views do a mathematical computation which returns a single value, but I only want to select the data for a single day.
The problem is that there are several views and I do not want to have to enter the date parameter a dozen times.

Try to use add command and write the query like this
select * from view where datefield={?date}
also create another add command for the other view
select * from view2 where datefield2={?date}
for all the queries create the same parameter with the name {?date}
Regards,
Raghavendra

Use of multiple Applications for single webdynpro component in ABAP WEB DYNPRO

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance

Hi Sam,
Different functionalities for a single webdynpro component can be achieved by many ways. Among them is the use of multiple applications. Say for example if you want different views/windows to be displayed at the start up, you can achieve it by specifying at the default window, for each every webdynpro application.
And if you want control the fields, say for example you want to display input fields as editable for one application and read only for other application, you can achieve it through application parameters. Based on parameters, in HANDLEDEFAULT method of window controller , you can specify the type of behaviour , whether it has to editable or not based on parameters and same can be used at context binding of UI properties.
Application configuration can be used for personalization.Web Dynpro ABAP Application Configuration. This tutorial would help you understanding the concept much better. There can be multiple application configurations for a single application.
Regards,
Harsha

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device. I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail. Thanks for your help.

Not a feature of iOS. Check the AppStore to see if there are other
mail apps that allow passcode protection.
Or use Safari to log onto your email via a web-based interface and
enter your credentials each time. A bit slower, but the kids will
not know the details to login.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Re: [SunONE-JATO] How to use a tiled view without a model

John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Re: [SunONE-JATO] Re: How to use a tiled view without a model

I'm not sure what is different for you now. You still parse the string
and put it into a data structure. Before the data structure was a
vector, in JATO its just a model with a "hidden" data structure (a hash
map).
MVC only really comes into play when you talk about where your write
this code, and where the data structure is being stored. So really, JATO
takes care of half of the MVC'ness of it all (where the data is store).
You just decide where to be the code to populate the model.
Make sense?
Is there something different required of you in JATO in this scenario
that I am not grasping?
c
Hoskins, John D. wrote:
Thanks for the feedback.
The problem I was solving involved a single string, which contained
delimited subsets of information.
The string looked like
this:"time|analyst|description|time|analyst|description|..."
In ND, I parsed it apart into it's components (time vector, analyst vector,
description vector), populated the repeated.
With JATO, how would I make a model for something that doesn't have a
database component like this?
I'm pretty new to this MVC thing, so bear with me.
John D. Hoskins
Telephone & Data Systems
Application Development & Support
Voice: 608.664.8263
Fax: 608.664.8288
Email: john.hoskins@t...
-----Original Message-----
From: Craig V. Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098031198039130252055210">craig.conover@s...</a>]
Sent: 6/26/2002 3.22 PM
Subject: Re: [SunONE-JATO] Re: How to use a tiled view without a model
I guess the only thing "weird" (for lack of a better term) about what
you are doing is that your are populating the model on the "display
cycle". Typically, the cycle goes like this:
Request -> populate model -> update data store -> retrieve data to
populate model -> display data
some of the above steps are optional but hopefully you get the point I
am making.
So what you are doing is:
Request -> populate model/display data
If it works for you, then it's not necessarilly wrong. But I would
probably have my model populated before I forwarded to the target
(displaying view bean) or at a minimum, in the begin display event of
the view bean or the tiled view, but not during the iteration of the
tiled view.
c
jhoskins wrote:
Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- Craig V. Conover wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Read selected values from a multi choice field programatically using Microsoft.SharePoint.Client namespace.

All examples I found refer to classes under Microsoft.SharePoint namespace. However, I have the SharePoint CSOM that only gives me the Microsoft.Sharepoint.Client namespace.
I need to read the selected values of a multichoice field, but not sure how to do it with classes in the namespace above.
everthing works, exept the TSQL_x0020_Reference_x0020_Numbe field.
my code looks like this:
Webweb = cont.Web;
            cont.Load(web);
            cont.ExecuteQuery();
Listsstest = web.Lists.GetByTitle("T-SQL
Code Review Tracking");
//CamlQuery query = CamlQuery.CreateAllItemsQuery();
CamlQueryquery =
newCamlQuery();
            query.ViewXml =
@"<View>
                           <ViewFields>
                                <FieldRef Name='Category'/>
                                <FieldRef Name='Review_x0020_Type'/>
                                <FieldRef Name='Review_x0020_Start_x0020_Date'/>
                                <FieldRef Name='Title'/>
                                <FieldRef Name='Location'/>
                                <FieldRef Name='Project'/>
                                <FieldRef Name='Author0'/>
                                <FieldRef Name='AssignedTo'/>
                                <FieldRef Name='TSQL_x0020_Reference_x0020_Numbe'/>
                            </ViewFields>
                         </View>"
ListItemCollectionitems
= sstest.GetItems(query);
            cont.Load(items);
            cont.ExecuteQuery();
foreach(ListItemitem
initems)
                Output0Buffer.AddRow();
                Output0Buffer.ReviewStatus = item.FieldValues[
"Category"] !=
null? item.FieldValues["Category"].ToString()
: String.Empty;
                Output0Buffer.ReviewType = item.FieldValues[
"Review_x0020_Type"] !=
null? item.FieldValues["Review_x0020_Type"].ToString()
: String.Empty;
                Output0Buffer.ReviewDate =
DateTime.Parse(item.FieldValues["Review_x0020_Start_x0020_Date"].ToString());
                Output0Buffer.Module = item.FieldValues[
"Title"] !=
null? item.FieldValues["Title"].ToString()
: String.Empty;
                Output0Buffer.BranchLocationURL = item.FieldValues[
"Location"] !=
null? item.FieldValues["Location"].ToString()
: String.Empty;
                Output0Buffer.ProjectName = item.FieldValues[
"Project"] !=
null? item.FieldValues["Project"].ToString()
: String.Empty;
                Output0Buffer.Author = item.FieldValues[
"Author0"] !=
null? item.FieldValues["Author0"].ToString()
: String.Empty;
FieldLookupValueflvAssignedTo =
newFieldUserValue();
                flvAssignedTo = item.FieldValues[
"AssignedTo"]
asFieldLookupValue;
if(flvAssignedTo !=
null)
                    Output0Buffer.AssignedTo = flvAssignedTo.LookupValue;
varv = item.FieldValues["TSQL_x0020_Reference_x0020_Numbe"];
if(v !=
null)
                    Output0Buffer.Reason2 = v.ToString();
             Output0Buffer.SetEndOfRowset();

Hi,
According to your description, my understanding is that you want to read the selected choice field value using Client Object Model.
In my environment, I create a list with a mutichoice fileld named "choice" and then I used the code snippet below to get the selected value in choice field.
ClientContext clientContext = new ClientContext("http://sp2013sps/sites/test1");
Microsoft.SharePoint.Client.List spList = clientContext.Web.Lists.GetByTitle("list1");
clientContext.Load(spList);
clientContext.ExecuteQuery();
if (spList != null && spList.ItemCount > 0)
Microsoft.SharePoint.Client.CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View>
<ViewFields><FieldRef Name='choice' /></ViewFields>
</View>";
ListItemCollection listItems = spList.GetItems(camlQuery);
clientContext.Load(listItems);
clientContext.ExecuteQuery();
string value = listItems[0]["choice"].ToString();
Console.WriteLine(value);
Console.ReadKey();
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to make a field Mandatory in a Table view?

How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.G

Hi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM

How to display the field name in the tabulated view for a content query web part

I have added a content query web part changed the web part file to include custom columns imported and reffered itemstyle.xsl
to include the tabulated view for the content query.
However the way it is displayed is such that only the content is displayed.
As i am using a tabular view wto display the data, i want to display their field names as well.

Hi ,
According to your description, my understanding is that you need to display the field in the tabulated view for a content query web part.
For your issue, please refer to the code as below:
<xsl:template name="VendorCustomStyle" match="Row[@Style='VendorCustomStyle']" mode="itemstyle">
<html>
<table width="100%">
<xsl:if test="count(preceding-sibling::*)=0">
<tr>
<td width="8%" valign="top"><div class="item"><b>Vendor ID</b></div></td>
<td width="12%" valign="top"><div class="item"><b>Vendor Name</b></div></td>
<td width="50%" valign="top"><div class="item"><b>Vendor Description</b></div></td>
<td width="10%" valign="top"><div class="item"><b>Vendor Country</b></div></td>
<td width="10%" valign="top"><div class="item"><b>Vendor Date</b></div></td>
<td width="10%" valign="top"><div class="item"><b>Created By</b></div></td>
</tr>
</xsl:if>
<tr>
<td width="8%" valign="top"><div class="item"><xsl:value-of select="@VendorID" /></div></td>
<td width="12%" valign="top"><div class="item"><xsl:value-of select="@Title" /></div></td>
<td width="50%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Description" disable-output-escaping="yes" /></div></td>
<td width="10%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Country" /></div></td>
<td width="10%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Date" /></div></td>
<td width="10%" valign="top"><div class="item"><xsl:value-of select="@Author" /></div></td>
</tr>
</table>
</html>
</xsl:template>
For more information, please have a look at the blog:
http://www.codeproject.com/Articles/756834/Customizing-the-Content-Query-Web-Part-and-Item-St
http://msdn.microsoft.com/en-us/library/ms497457.aspx
http://clarksteveb.hubpages.com/hub/Customized-Content-Query-Web-Part-CQWP-in-SharePoint-2007-with-results-Tabbed-Grouped-and-in-an-HTML-Table
http://blog.sharepointexperience.com/customitemstyle/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Field is used on multiple views

Similar Messages

Maybe you are looking for