Use of multiple Applications for single webdynpro component in ABAP WEB DYNPRO

I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance

Hi Sam,
Different functionalities for a single webdynpro component can be achieved by many ways. Among them is the use of multiple applications. Say for example if you want different views/windows to be displayed at the start up, you can achieve it by specifying at the default window, for each every webdynpro application.
And if you want control the fields, say for example you want to display input fields as editable for one application and read only for other application, you can achieve it through application parameters. Based on parameters, in HANDLEDEFAULT method of window controller , you can specify the type of behaviour , whether it has to editable or not based on parameters and same can be used at context binding of UI properties. 
Application configuration can be used for personalization.Web Dynpro ABAP Application Configuration. This tutorial would help you understanding the concept much better. There can be multiple application configurations for a single application.
Regards,
Harsha

Similar Messages

  • Multiple webdynpro applications for single webdynnpro component

    I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance .
    Rgds,
    Praveen

    Hi Saravanan,
    I need to modify it from the portal end, not at the application level.
    I need some configuration steps which specifies how to modify the Detail Navigation in PPM. Using SPRO we can do some configuration, i wanted to know whether its possible from portal end as well.
    Regards
    Shivas Bhan

  • How to integrate multiple applications for single project as single appl

    Hi,
    I'm struggling to find out about that how to combine all the applications developed by my team members.
    We all created each application having many pages, how to combine all this pages to create as a single appl.
    Can anyone please tell me how to do it?
    Thanks,
    Sundar

    My solution still stands. Search the docs.
    This presentation might assist: http://www.sagecomputing.com.au/papers_presentations/ADF%20Architectural%20Patterns%20-%20LongBeach%20ODTUG%20minus%20pics.pptx
    CM.

  • How to uploade multiple flatfiles for single transaction using BDC?

    How to uploade multiple flatfiles for single transaction using BDC?

    Hi,
    You need to upload all data files into an internal table first either using OPEN DATASET (application server files) or GUI_UPLOAD (PC files).
    Then loop at the internal table and call BDC transaction to process the data.
    Regards,
    Ferry Lianto

  • Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

    Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
    My client requirement is process 100 files  from biztalk with in 5 min ,actually it is taking 20 min .
    So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
    schema’s with multiple  time .
    Any help can be  appreciate ..

    BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
    http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
    Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up.  As an example, it you want  the MSMQ adapter to immediately pick up messages and start
    to process them, set the batch size to 1.
    You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
    David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

  • Set multiple passwords for single PDF

    Hi All,
    Do it is possible to set multiple passwords for single PDF i.e) a single PDF can be accessed using predefined passwords. It would be great if any one could can help me .
    Thanks
    Augustine

    Thank you.
    Do you mean different IDs can be used for a single PDF and can make the PDF protected.
    Regards
    Augustine

  • Multiple Alerts for Single error in interface is a design not issue with XI

    Hi,
    This is constraint of alert mechanism in XI.
    You get multiple alerts for single error,the reason is that since XI will try multiple times to process a failed message so each time it fails in its tries it will send an e-mail.to stop this the "Suppress multiple alert" box is checked but what it does is that it stops all the alerts of that specific rule until the first one is confirmed.Personally i myself (and other experts too) suggest to leave the box unchecked coz its better to get tons of mails for a specific error rather than not getting any e-mail and thereby wasting time in tracking/solving the issue resulting in revenue loss to client.
    As per above comments is it possible to write an ABAP code so that we can stop multiple alerts to be sending to inbox. I am sure if we can delete message from some table then we can stop sending multiple messages to alert inbox and to the subsequent mail id also. I am not sure how alert being generated. I know where they get logged in this table sxmsalertlogger. If someone know how it works in background please let me know the table names.
    Regards
    Ria

    Hi Gaurav,
    You can personalize the way in which you receive alerts.
    Simply choose Personalization to make individual settings for your alert inbox. You can determine a substitute who will then receive the alerts. In addition, you can choose whether alerts are sent to you time-independently or time-dependently. The default setting is that alerts are sent time-independently to your alert inbox and via e-mail when they occur. You can additionally select the communication methods FAX and SMS for time-independent alert notification.
    If you want to receive alerts only on certain days for a certain time, simply select the option for time-dependent sending of alerts and choose Create to create a new table entry. You can then choose the corresponding factory calendar, the time interval, and communication channel. Alerts that arise during this time frame will be sent in any case to your alert inbox. If you have also selected other communication channels, the alerts are additionally sent to you using these other channels. 
    This above text is from SAP help, do you think by changing anything in personnalisation i can stop multiple alerts. I have some issue with Personalisation link so was wondering would be worth to get tht personalisation issue resolved.
    Regards
    Ria

  • Partner Function Queries Multiple Partners for Single Partner function SO

    Hi Experts
    Is it possible to  enter multiple partners  for Single partner Function in SALES ORDER
    For Ex : We have created Z1 as a Partner function for Sales Executives : and Sales Executive 1 , Sales Executive 2 Sales xecutive 3 etc as sales Partners for Z1 partner Function .
      Now Is it possibe to enter for Z1 -
    sales Exeutive 1
                                                Z1----
    Sales executive 2
                                               Z1----
    Sales Executive 3............
    I would be greatful if you repond the same at the earliest
    Thanks
    Rashmi K

    Hi Rashmi,
    The requested function is possible.
    In the customizing of partner function, you could set the field Unique as blank. Then you could enter multiple partners for same partner function.
    IMG->SD->Basic functions->Parnter determination->Partner Functions
    Hope it helps.
    Thanks and best regards,
    Smile

  • Use of multiple components in ABAP WEB DYNPRO

    Hi,
    Am  new to  abap web dynpro and I just want to know whether  we  can  use  multiple components for an application in web dynpro.
    Thanks ,
    Dhaya.G
    Edited by: Dhayalinie Ganesh on Feb 22, 2012 12:06 PM

    Hi,
    depending requirement of application we can use multiple components.
    for example if we want to display table data into alv grid for that we can use the existing(standard component) ie: SALV_WD_TABLE  .Like such a way we can use the components as per our requirements.
    For importing components:
    --> Go to properties tab of view of your web dynpro application
    --> There you can find one button create controller usage ,click on it then import the components
    Thanks&Regards
    Sreenivas Pachva
    Edited by: sreenivas.p on Feb 22, 2012 1:11 PM

  • Creating 'Z' views for Standard ABAP Web dynpro Application

    Hi Experts,
    I am totaly new to ABAP web dynpro objects.
    In our project there were some client requirements which required us to change the properties of the Views related to the Webdynpro. The Client now has said that he needs to apply some  enhancement pathces on his system. Due to this, the changes made to the Views i.e all the changes done in standard code are  lost.
    The client now wants a long term solution where all the changes need to be done in 'Z' implimentataion so that changes are not lost every time the pathces are applied.
    Is it possible to create an entire new 'Z' Views for the standard Webdynpro instead of standrad ones?
    If Yes how does one link them to the Webdynpro application ?

    Hi
    Have a look at following article about enhancing webdynpro applications.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81?quicklink=index&overridelayout=true
    Regards
    Manas Dua

  • I want weblog or tutorial for component usage in abap web dynpro

    Hi team,
    I want to know how component usage works in abap web dynpro.so can you please help me with providing a tutorial and step by step to use component in it.
    Thanks,
    Mainak

    Hi Mainak.
    In https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11">tutorial [original link is broken] [original link is broken]
    Hope this helps.
    Cheers,
    Sascha

  • Using IGS in Abap web dynpro application

    Hi ,
    I would like to develop an Abap web dynpro application with complex graphs.
    There is an installation of IGS services.
    In the layout screen I see only graphic basic options.
    In thr internet I saw much more options in the graphic label. ( WD applic-> view-> layout ).
    Does anyone know how to add this options to the view layout?
    Thenks,

    עיחיחןלכלןעל

  • Use ZBEX Anonymous Login Service in BIApplicationFrame in ABAP Web Dynpro

    Hello,
    We created a ZBEX Service as an alias of the BEX Service as per SAP OSS Note 516884 to allow users to anonymously access BW reports.
    Now we want to embed the BI Web Application in an ABAP Webdynpro as a BIApplicationFrame.
    Note that the ABAP Web Dynpro is on the SAP R/3 ERP side while BI is a separate BW instance.
    The problem we are facing is the standard BIApplicationFrame element uses the SAP standard BEX service when it forms the URL and we do not seem to have a way to make it use the ZBEX Anonymous login service. Hence it always asks for the logon screen defeating our purpose.
    Has anybody done been able to make the BIApplicationFrame use ZBEX service and if yes, what is the solution to this problem?
    Thanks and regards,
    Atul Kulkarni

    Hi Ankur,
    Someone will somewhere call the EJB (not: "Java Bean"!). As an EJB isn't part of a request/response cycle but mainly thought for business logic, it is of course the task of the calling component to deliver the user (his logonID for example) to the EJB.  There is not other way!
    Hope it helps
    Detlev

  • ABAP Web Dynpro: Application Configuration vs Admin Personalization problem

    Hi,
    I created an application configuration for the application MT_ORDER_APP with a component configuration on RPLM_MT_ORDER_COMP.  I changed several Labels and UI Element visibility... and saved.
    When I test this application config for viewing an order of type ZX99, I don't see my changes.  If I right-click on the page, I see that the configuration Id used is MT_ORDER_ZX99.
    Why my Z config is overrided by this one???
    By testing in Admin mode, I discovered that I can personalize this MT_ORDER_ZX99 Config.... But then, the changes are visible to all users viewing ZX99 type orders.
    How to manage to make my Application Config highest in priority?

    Hi,
    how did  you  open in administrative mode?
    to open in adminstrative mode do as follows:
    In se80 ,i.e in the menu bar:
    Web Dynpro Application->Test->Test in Administation mode.
    i hope u can see the option "Settings for surrent config" .
    you can refer the thread.
    [Re: ABAP Web Dynpro Application changes in Administation mode]
    Priya.

  • Environment needed for developing, deploying the ABAP Web Dynpro

    Hi all,
    We have the following ECC environmnet in our office.
    ERP 2005, RELEASE 6.0
    KERNEL 7
    COMPONENT ECC 6.0 NON -UNICODE SYSTEM
    BASIS & ABAP SP 14
    We also dont have Enterprise Portal and no PI or XI. can we develop ABAP Web Dynpro without EP?
    I want to develop Web Dynpro's using ABAP. Can i do it? Do we need to install any thing else? any plug in..or do we need to upgrade our service pack?
    We are on service pack 14 and on ABAP Stack.
    Some one kindly help..this might be a simple question for many people...but i am really in need of information and could not get proper idea after reading the SDN and help.com
    if some one has a link .that explains the environmnet that i should have for Web dynpro ABAP..please help.
    Regards,
    Jessica Sam

    Thomas,
    Thanks a lot for your patience. Few more minutes of your valuable time..need help.
    So i can conclude that with my environmet and ABAP statck ..i can develop Web dynpro ABAP and BSP but not Adobe Forms.
    We have BI system in our office which runs on Java Stack and our ECC system is only on ABAP stack.
    But we were using ABAP Web services to build interfaces b/w SAP and .Net applications and hence we wanted to use SOAMANAGER,
    But SOAMANAGER runs on Java Stack and we dont have Java stack on ECC but have on BI.
    So what we did was..did some BASIS settings in BI and ECC systems and finally able to use SOAMANAGER of BI system to manage , create and deploy web services from our ECC system whihc is on ABAP Stack.
    Similarly can I also use the Java Stack in our BI system and do some settings at ECC end such that I can buid the interactive forms in ECC and use the Java Stack of BI system.
    Kindly please help..i am not getting answers to such questions in help.sap.com...may be people like you who are well experience will only able to guide me better.
    Kind regards,
    Jessica Sam

Maybe you are looking for