Field-symbols : internal table

Dear experts,
I am trying to put contents of internal table from a standard transaction in this way but i am not getting.
Further i get last record successfully if i try to follow the code of this link
http://www.sapdevelopment.co.uk/enhance/enhance_fsymbol.htm
The code that i use is :
types: begin of t_type,
tabix type i,
color type c,
selfl type c,
vbeln like lips-vbeln,
posnr like lips-posnr,
kschl like nast-kschl,
nacha like nast-nacha,
parvw like nast-parvw,
pname like kna1-name1,
pcity like lfa1-ort01,
vstel type c,
lfdat like mkpf-budat,
wadat like mkpf-budat,
end of t_type.
data : pgm(40) value '(SAPLKKBL)T_OUTTAB[]'.
field-symbols: <fs> type standard table.
data: i_get type t_type occurs 0 with header line.
assign (pgm) to <fs>.
append lines of <fs> to i_get[].
But not getting,the datatype i have created is only by looking at fields in memory map.Its not exactly of T_OUTPUT[] as it can't be referred

Hi aditya,
Please try defining field symbol as of generic type ( TYPE ANY).
or try this way.
data :
pgm(40)
t_pgm like standard table of pgm.
field-symbols: <fs> type ANY
data: i_get type t_type occurs 0 with header line.
t_pgm = (SAPLKKBL)T_OUTTAB[].
Loop at t_pgm into pgm.
assign pgm to <fs>.
append <fs> to i_get[].
ENDLOOP.
Hope this would help you.
Good luck
Narin

Similar Messages

How to handle field symbols internal table values?

HI all,
          I declared field string as below.The below code is working fine.
Data : ITAB TYPE STANDARD TABLE OF YAPOPLN, (Custom table).
          wa_itab like line of ITAB.
field-symbol : <fs> type ITAB.
ASSIGN PARAM TO <FS>
LOOP AT <FS> INTO WA_ITAB.
WRITE:/ 'ABC'.
ENDLOOP.
But my requirement is that I dont want all the fields of the table YAPOPLN.My output contains only 2 fields of the table YAPOPLN,which contains total 4 fields.According to my requirement only 2 fields will be getting into one parameter PARAM(this is function module parameter,which is from ALV classes) from the user entered output,which contains only 2 fields.So the above code is not working properly because wa_itab contains 4 fields and giving short dump.
If I am declaring the internal table with the required fields(only 2 fields) and referring that internal table to field symbol <FS>
Data : BEGIN OF ITAB1 OCCURS 0,
         FIELD1 LIKE YAPOPLN-FIELD1,
         FIELD2 LIKE YAPOPLN-FIELD2,
         END OF ITAB1.
field-symbol : <fs> LIKE ITAB1 OR <FS> TYPE ANY.
DATA :WA_ITAB1 LIKE LINE OF ITAB1.
ASSIGN PARAM TO <FS>
LOOP AT <FS> INTO WA_ITAB.
WRITE:/ 'ABC'.
ENDLOOP.
But when I am compiling this code i am getting the below error.I am gettting the same below error when even <FS> is also declared as <FS> TYPE ANY.
.'FS' is not an internal table or defined in TABLES.
Can anyone help me in this regard?
Thanks,
Balaji

Hello,
Try this way:
If both the type of internal tables are same then you can directly assign dynamic internal table to static internal table.
itab = <itab>.
Suppose you have field symbol internal table <itab> which is different in structure from ITAB.
Now, you can create <wa> as follow:
FIELD-SYMBOLS <wa>.
DATA wa TYPE REF TO DATA.
CREATE DATA wa TYPE LINE OF <itab>.
ASSIGN wa->* to <wa>.
This way your work area is read.
Using [ASSIGN COMPONENT|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/eb3923358411d1829f0000e829fbfe/content.htm] syntax you can read required component of <wa>.
Finally you can use that value to load static internal table.
You can also refer to my thread on [Dynamic table|Re: Creating Dynamic table].
Hope this helps!
Thanks,
Augustin.
Edited by: Augustarian on Aug 20, 2009 10:06 AM

How to move field symbol internal table to internal table with header line?

Dear all,
hi...hereby i would like to ask how i can move field symbol internal table to a internal table?
as i know field symbol internal table is without header line..
so, may i know how to do this....to move field symbol internal table to internal table which consist of header line and field and record will same as field symbol internal table...in additional, my field symbol internal table is dynamic table mean everytime will have flexible columns..?
Please advise...
Thanks
Regard,
ToToRo.
Edited by: @ToToRo@ on Aug 20, 2009 6:16 AM

Hello,
Try this way:
If both the type of internal tables are same then you can directly assign dynamic internal table to static internal table.
itab = <itab>.
Suppose you have field symbol internal table <itab> which is different in structure from ITAB.
Now, you can create <wa> as follow:
FIELD-SYMBOLS <wa>.
DATA wa TYPE REF TO DATA.
CREATE DATA wa TYPE LINE OF <itab>.
ASSIGN wa->* to <wa>.
This way your work area is read.
Using [ASSIGN COMPONENT|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/eb3923358411d1829f0000e829fbfe/content.htm] syntax you can read required component of <wa>.
Finally you can use that value to load static internal table.
You can also refer to my thread on [Dynamic table|Re: Creating Dynamic table].
Hope this helps!
Thanks,
Augustin.
Edited by: Augustarian on Aug 20, 2009 10:06 AM

How can i know the number of lines in field-symbol internal table

how can i know the number of lines in field-symbol internal table

Hi,
If your field symbol has been defined as an internal table :
Use std describe as
Data: l type i.
describe <fs> lines l.
'l' will contain the number of lines as needed.
FYI
The size of this storage area in a field symbols depends on the number of table lines which is not fixed, but determined dynamically at runtime.
Regards,
Amit

Reading the data from field symbol internal table //

Hi,
There are 2 internal tables defined as Fieldsymbols (type any) and I need to retrive data from second internal table based on a field value in first internal table.
Let's assue the name internal table 1 is <it_itab1>, 2nd internal table name is <it_itab2> and the work areas are <wa_itab1> and <wa_itab2>.
The existing logic :
LOOP at <it_itab1> ASSIGNING <wa_itab1>.
ASSIGN COMPONENT 'XYZ' OF STRUCTURE <wa_itab1> TO l_field6.
LOOP AT <it_itab2> ASSIGNING <wa_itab2>.
    ASSIGN COMPONENT 'XYZ' OF STRUCTURE <wa_itab2> TO <p_field7>.
    IF <p_field7> = l_field6.
do the required business.
    ELSE.
      *     do the required business.
    ENDIF.
ENDLOOP.
ENDLOOP.
The requirement of reading second internal table was achieved by putting loop on the internal table but its giving considerable effect on performance !!
Is there any way to use READ statement in my case OR any way of putting WHERE condition on loop statement of second internal table ??
Thank you !!

Use the below Logic.
Loop at Itab1 into wa_itab1.
    Loop at itab2 into wa_itab2 where p_field7 = wa_itab1-xyz or I_field6.
do the required business.
    endloop.
    Loop at itab2 into wa_itab2 where p_field7 <> wa_itab1-xyz or I_field6.
do the required business.
    endloop.
endloop.
Hope it is useful...

Assign function code to a field in internal table

Hi all,
Can we assign a function code to one field in internal table so that we can use it as an user command in list display.
For ex:
data : begin of itab occurs 0,
          check(1) type C,
          num type I,
         end of itab.
I am preparing a list display using WRITE statements.
I'ld like to update the checked value of check box as soon as the user selects a check box. So I would like to assign a function code to this check box. Then I can use AT user-command.

Hi,
dinesh's apporach is not bad, but
1. the structure' name cannot be part of the component
2. you need to make sure the component-name always is in upper case.
Try adapting the following code:
data: begin of wa_test,
          field01 type string,
          field02 type string,
          field03 type string,
       end of wa_test.
data: l_fieldname type string,
       l_counter    type string.
field-symbols: <testc> type string.
do 3 times.
l_counter = sy-index.
concatenate 'field0' l_counter into l_fieldname.
translate l_fieldname to upper case.
assign component l_fieldname of structure wa_test to <testc>.
if <testc> is assigned.
    <testc> = 'any value'.
endif.
enddo.
write / wa_test-field01.
best regards

How To select maximum Value in a specifieid field in internal table.

How To select maximum Value in a specifieid field in internal table?

Step : 1
Sort itab by <Field1> descending.
Just sort the internal table by the field.
STEP: 2
Then read the table at index 1.
Read table itab index 1.
ITAB-FIELD = MAX . " Max field will come in the first row of the internal table.
Regards,
Gurpreet

How to add the contents of a field of internal table.

Hello Everybody,
How to sum up the individual field from a internal table. Like i have a internal table that has menge field , I need to sum up the menge field for each matnr..
exm : for each matnr there are 5 menge entries, I need to add all the menge fields and shud be put against the matnr .
Thanks,

Hi Khaleel,
One more option is using the "collect" statement.....
imagine in the internal table itab..we have 2 fields only..
MATNR,MENGE,
we have 2 internal tables itab1 and itab2...
loop at itab1.
collect itab1 to itab2.
endloop.
Action performed is ...for the same MATNR...menge gets added and saved as a single record...When matnr changes...new record is Appended
another case is we have 3 fields in internal table
MATNR,UNIT,MENGE
imagine we hane the records
Material1 KG 100
Material1 LT 20
Material1 LT 200
MAterial2 KG 100
in this case...the output will be
Material1 KG 100
Material1 LT 220
MAterial2 KG 100
Reason is that the fields before the addable value is checked for similarity..
here field UNIT is also checked and also MATNR before adding up....
Hope it gave you some alternative idea to proceed with....
Reward if helpful
Regards
Byju

Read contents of changing fields from internal table

Hi Folks,
Please help me in my query below:
Consider there is a Z-table with two fields TABNAM and FIELD having values KNA1 and NAME1 respectively.
In my report I have fetched entries for customers from KNA1. Now based on the field from Z-table I want to populate a variable suppose V_FREE_VAR with the value from KNA1 table.
Here V_FREE_VAR is of CHAR200 so that it accomodate all types of values from KNA1.
The value of Z-table FIELD can change daily i.e next day the value may be PSTLZ.
So how can I read the particular field from internal table as the field to be read is dynamic.
Note: using case is not feasible.
Thanks in advance.
Regards,
Shardul

@Hartmut P
As Rob said i want to get the value of the field from internal table. the code is something like this.
I_KNA1 contains records for customers.
Suppose values of Z-table are in internal table I_TEMP_TABLE.
Entries in I_TEMP_TABLE are as follows
TABNAME      FIELDNAME
KNA1                 NAME1
The value of FIELNAME in Z-table can be changed
Loop at I_TEMP_TABLE into WA_TEMP_TABLE.
Read I_KNA1 into WA_KNA1 with key KUNNR = '0001002234'.
IF SY-SUBRC EQ 0.
   CASE WA_TEMP_TABLE-FIELDNAME.
        WHEN 'NAME1'.
             V_VAR = WA_KNA1-NAME1.
         WHEN 'PSTLZ'
              V_VAR = WA_KNA1-PSTLZ.
ENDIF.
But using case is not appropriate as KNA1 contains 176 fields.

Loop at field-symbol (any table) into string ?

Hi Everyone,
I need little help, I have a requirement to extract table content with columns names as the header.
After doing some search I figured out the best way to this since table name will be only avaialbe at runtime through
a selection field . my problem is to loop through field-symbol and convert a structure to string value so that I can
write to the file.
REPORT zlab_tbl_export.
DATA table_name(30) VALUE 'ZSMARTTS_HTML'.
DATA v_file(100) VALUE 'c:\sap_export.txt'.
DATA line(1000).
DATA: o_data TYPE REF TO data.
CREATE DATA o_data TYPE TABLE OF (table_name).
FIELD-SYMBOLS: <table> TYPE ANY TABLE.
ASSIGN o_data->* TO <table>.
SELECT * UP TO 100 ROWS FROM (table_name) INTO TABLE <table>.
OPEN DATASET v_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
>>>>>>> LOOP at <table> into line.   >>>>>>>>>>>> " Here the code breaks and fail
TRANSFER line to v_file.
WRITE :/ line.
ENDLOOP.
CLOSE DATASET v_file.
Exception Message
|Error analysis                                                                                |
|    You attempted to move one data object to another.                                             |
|    This is not possible here because the conversion of a data object                             |
|    of type "v" to type "C" is not supported.                                                     |
|                                                                                |
|      List of internal ABAP types:                                                                |
|                                                                                |
|      C    Text (Character)                                                                       |
|      N    Numerical text                                                                         |
|      D    Date (YYYYMMDD)                                                                        |
|      T    Time (HHMMSS)                                                                          |
|      X    Hexadecimal                                                                            |
|      I    Integer                                                                                |
|      P    Packed number                                                                          |
|      F    Floating point number                                                                  |
|                                                                                |
|      h    Internal table                                                                         |
|      r    Object reference                                                                       |
|      l    Data reference                                                                         |
|      g    String of type C                                                                       |
|      y    String of type X                                                                       |
|      s    2-byte integer with plus/minus sign                                                    |
|      b    1-byte integer without plus/minus sign                                                 |
|      u    Structure (flat structure)                                                             |
|      v    Structure (deep structure)                                                             |

Hi Everyone, I need little help, I have a requirement to extract table content with columns names as the header. After doing some search I figured out the best way to this since table name will be only avaialbe at runtime through a selection field . my problem is to loop through field-symbol and convert a structure to string value so that I can write to the file.
thie is the code
REPORT zlab_tbl_export.
DATA table_name(30) VALUE 'ZSMARTTS_HTML'.
DATA v_file(100) VALUE 'c:\sap_export.txt'.
DATA line(1000).
DATA: o_data TYPE REF TO data.
CREATE DATA o_data TYPE TABLE OF (table_name).
FIELD-SYMBOLS: <table> TYPE ANY TABLE.
ASSIGN o_data->* TO <table>.
SELECT * UP TO 100 ROWS FROM (table_name) INTO TABLE <table>.
OPEN DATASET v_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP at <table> into line.   " Fail here
TRANSFER line to v_file.
WRITE :/ line.
ENDLOOP.
CLOSE DATASET v_file.
and this is the exception:
Error analysis
You attempted to move one data object to another.
    This is not possible here because the conversion of a data object
    of type v to type C is not supported.
Edited by: Misbah on Jan 7, 2010 11:50 PM

Field symbols as Table name and in where condition in a select statement

Hello All,
I have a scenario where I need to get user input on table name and old field value and new field value. Then based on user input, I need to select the record from the database. The column name for all the tables in question is different in the database, however there data type is the same and have same values.
I am not able to use a field symbol for comparing the old field value to fetch the relevant record in my where clause.
I cannnot loop through the entire table as it has 10 millilon records, please advice on how to add the where clause as field symbol as the table name is also dynamically assigned.
Here is my code:
DATA: TAB       LIKE SY-TNAME,
      TAB_COMP1 LIKE X031L-FIELDNAME,
      TAB_COMP2 LIKE X031L-FIELDNAME,
      NO_OF_FLD TYPE N.
DATA: BEGIN OF BUFFER,
        ALIGNMENT TYPE F,
        C(8000)   TYPE C,
      END OF BUFFER.
FIELD-SYMBOLS: <WA>   TYPE ANY,
              <COMP1> TYPE ANY,
              <COMP2> TYPE ANY.
GET TABLE NAME GIVEN BY USER IN LOCAL VARIABLE
TAB = TAB_NAME.
CREATE FIELD NAME BASED ON THE TABLE NAME ENTERED.
CASE TAB_NAME.
WHEN 'OIUH_RV_GL'.
      KEY FIELD
        TAB_COMP1 = 'GL_GL_SYS_NO'.
        NO_OF_FLD = 1.
WHEN 'OIUH_RV_OPSL'.
      KEY FIELD
        TAB_COMP1 = 'OPSL_GL_SYS_NO'.
        NO_OF_FLD = 1.
WHEN 'OIUH_RV_OTAX'.
      NOT THE ONLY KEY FIELD
        TAB_COMP1 = 'OTAX_GL_SYS_NO'.
        TAB_COMP2 = 'OTAX_TAX_POS_NO'.
        NO_OF_FLD = 2.
WHEN 'OIUH_RV_GTAX'.
      NOT THE ONLY KEY FIELD
        TAB_COMP1 = 'GTAX_GL_SYS_NO'.
        TAB_COMP2 = 'GTAX_TAX_POS_NO'.
        NO_OF_FLD = 2.
WHEN OTHERS.
        EXIT.
ENDCASE.
SET FIELD SYMBOL WITH APPROPRIATE TYPE TO BUFFER AREA.
ASSIGN BUFFER TO <WA> CASTING TYPE (TAB).
How to add where clause and remove the if condition in the select -- endselect
SELECT * FROM (TAB) INTO <WA>.
ASSIGN COMPONENT TAB_COMP1 OF STRUCTURE <WA> TO <COMP1>.
IF NO_OF_FLD = 2.
    ASSIGN COMPONENT TAB_COMP2 OF STRUCTURE <WA> TO <COMP2>.
ENDIF.
IF <COMP1> = OLD_SYS_NO.
    code for updating table would come here
      WRITE: 'MATCH FOUND'.
      EXIT.
ENDIF.
ENDSELECT.
Please advice. Thanks much.
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:33 PM
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:34 PM
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:35 PM

1. Create single column table for holding field name depending on the table entered.
2. Take input from user: for e.g. table_name
3. Using case load single column table with required fields
   for e.g.
CASE TAB_NAME.
   WHEN 'OIUH_RV_GL'.
         Append 'GL_GL_SYS_NO' to KEY_FIELD --> KEY_FIELD is the single line internal table as mentioned in step 1.
   WHEN 'OIUH_RV_OPSL'.
         Append 'OPSL_GL_SYS_NO'.
   WHEN 'OIUH_RV_OTAX'.
         Append 'OTAX_GL_SYS_NO' to KEY_FIELD.
           APPEND 'OTAX_TAX_POS_NO' to KEY_FIELD.
   WHEN 'OIUH_RV_GTAX'.
         Append 'GTAX_GL_SYS_NO' to KEY_FIELD.
           APPEND 'OTAX_TAX_POS_NO' to KEY_FIELD.
   WHEN OTHERS.
      EXIT.
   ENDCASE.
   Now depending on the table name you have required column ready
4. Create dynamic internal table using following sudo code
   Fill the fieldcatlog using the single column field table and DD03L table, See what all columns from DD03L you want to fill in field catlog table
   loop at internal table with all the fields.
    move it to field catalog.
    append field catalog.
   endloop.
5. Pass this field catalog table to static method create_dynamic_table method
   DATA table TYPE REF TO DATA. --> data object for holding handle to dynamic internal table.
   call method cl_alv_table_create=>create_dynamic_table
   exporting
      it_fieldcatalog = fieldcatalog_tab
   importing
      ep_table = table.
6. Now assign table reference to field symbol of type table.
   ASSIGN table->* to <field-tab>.
7. Also create work area <field-wa> using refrence of table.
   create data object wa LIKE LINE OF <field-tab>.
   ASSIGN wa->* to <field-wa>.
8. Also define field symbol for field name.
   for e.g. <field_name>
4. Dynamic internal table is ready
5. Now execute the select statement as follows:
   SELECT (KEY_FIELD)
     INTO <ITAB> --> created dynamically above
      FROM (TABLE_NAME)
     WHERE (WHERE). --> WHERE is single line internal table having line type of CHAR72. So for every old value there will be one line
     Where condition is same as like we give in static way only difference in this case it will stored in internal table line wise.
    In this case you need to append all your where condition line by line in to WHERE.
5. To fill this dynamic internal table using ASSIGN COMPONENT <Comp_number> OF STRUCTURE <field-wa> TO <field-name>
   So in this case if first field of structure STRUCT1 is user_id then sudo-code will be
   loop at internal table containing list of fields into field_wa --> single column field table
       ASSIGN COMPONENT field_wa OF STRUCTURE <field-wa> TO <field>. "Here field_wa is wa area for single column internal table holding all the fieldnames.
       Now <field-name> points to user_id field. Move some value into it as nornally we do with variables.
       Move <your_new_value> to <field-name>. --> Assign new value
        or
        <field-name> = <your_new_value>.
   Endloop.
6. After completing all the fields one row will be ready in <field_wa>.
   APPEND <field_wa> to <field_tab>.
Hope this helps you.
Thanks,
Augustin.

How to pass field symbol or table from one view to another view in abap web dynpro?

I am creating an Inbound Outbound ALV report in ABAP Web Dynpro. However at selection-screen I have select options and fetching is done at view2. Problem is we can pass parameter using inbound outbound parameters but how to pass internal table or field-symbols from one view to another view? I made use of Assistance Class too but its not very clear to me. Please give me some example or code to sort this problem out.

I am creating an Inbound Outbound ALV report in ABAP Web Dynpro. However at selection-screen I have select options and fetching is done at view2. Problem is we can pass parameter using inbound outbound parameters but how to pass internal table or field-symbols from one view to another view? I made use of Assistance Class too but its not very clear to me. Please give me some example or code to sort this problem out.

Replace field in internal table

Hi gurus,
I have an internal table in which I need to replace a field with a different value. I have tried the REPLACE __ IN TABLE __ WITH statement, but it did not seem to work.
Also, I cannot use a SORT TABLE statement because the record needs to be at a certain index in the table.
Any suggestions? <REMOVED BY MODERATOR>
Thanks in advance!
Edited by: Alvaro Tejada Galindo on Aug 14, 2008 3:03 PM

Hi. If you know the exact field in the exact row of the table, you could do something like this.   This is direct access to the field without having to use the MODIFY statement.
REPORT zrich_0001.
TYPES: BEGIN OF ttab,
       fld1 TYPE c,
       fld2 TYPE c,
       fld3 TYPE c,
       END OF ttab.
DATA: itab TYPE TABLE OF ttab.
DATA: wa LIKE LINE OF itab.
FIELD-SYMBOLS: <wa> LIKE LINE OF itab.
* fill ITAB with data.
wa-fld1 = 'A'.
wa-fld2 = 'B'.
wa-fld3 = 'C'.
APPEND wa TO itab.
wa-fld1 = 'D'.
wa-fld2 = 'E'.
wa-fld3 = 'F'.
APPEND wa TO itab.
wa-fld1 = 'G'.
wa-fld2 = 'H'.
wa-fld3 = 'I'.
APPEND wa TO itab.
* Now access FLD2 of row 2, and change the value to X
READ TABLE itab ASSIGNING <wa> INDEX 2.
IF sy-subrc = 0.
<wa>-fld2 = 'X'.
ENDIF.
Regards,
Rich Heilman

Looping over fields from internal table

In a FM I have to check records of two ITABs against each other. Most fields can be checked 1:1 but some must be checked according to some business logic.
I first want to check field-by-field and then I want to deal with exceptions.
Question: How can I loop over fields in an ITAB in such a manner that I can compare fields?

Hi, you can loop thru the columns(fields) of an internal table like so.
field-symbols: <fs>.
loop at itab.
do.
* Here you can use the field name instead of SY-INDEX
   assign component sy-index of structure itab to <fs>.
   if sy-subrc <>.
   exit.
   endif.
* Now that you have access to the field via field symbol, you can compare
* this value.
Write:/ <fs>.
enddo.
endloop.
Regards,
Rich Heilman

Populate dynamic table fields from internal table

Hi,
Im trying to populate an dynamic table , but it's giving me a few errors witch i can't solve ...
Basically i have an internal table with te following types :
DATA: BEGIN OF tab_docs41 OCCURS 0,
      conta TYPE bsis-hkont,
      banco TYPE t012t-text1,
      ano_3 TYPE i,
      ano_2 TYPE i,
      ano_1 TYPE i,
      jan TYPE i,
      fev TYPE i,
      mar TYPE i,
      abr TYPE i,
      mai TYPE i,
      jun TYPE i,
      jul TYPE i,
      ago TYPE i,
      set TYPE i,
      out TYPE i,
      nov TYPE i,
      dez TYPE i,
      total TYPE i,
      montante TYPE betrag11,
END OF tab_docs41.
and the following fieldcatalog , for the dynamic table :
DATA : ls_fieldcat TYPE lvc_s_fcat.
DATA: lv_period TYPE i.
DATA str_period TYPE string.
SUBTRACT 3 FROM ano.
MOVE ano TO str_period.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'CONTA'.
ls_fieldcat-seltext = 'Conta do Razão'.
ls_fieldcat-datatype = 'HKONT'.
* ls_fieldcat-intlen = '10'.
APPEND ls_fieldcat TO p_fieldcat.
Since the internal table, tab_docs41 it's allready filled how can i pass the tab_docs41 values to the corresponding fields of the dynamic table (the move-corresponding it's not working..)
ASSIGN fs_data->* TO <fs_1>.
CREATE DATA new_line LIKE LINE OF <fs_1>.
* ASSIGN new_line->* TO <fs_2>.
*** Next step is to create a work area for our dynamic internal table.
LOOP AT tab_docs41.
   ASSIGN COMPONENT 'CONTA' OF STRUCTURE tab_docs41 TO <fs2>.
But this last step it's not working ...
Can anyone help me please ?
Point's will be rewarded
Best Regards
Thanks in advance
João Martins

Looks like you have used the method CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE to create the dynamic internal table.
You have to change the last part of the code:
FIELD-SYMBOLS:
<itab> TYPE STANDARD TABLE,
<wa> TYPE ANY,
<val> TYPE ANY .
ASSIGN fs_data->* TO <itab>.
CREATE DATA new_line LIKE LINE OF <itab>.
ASSIGN new_line->* TO <wa>.
LOOP AT tab_docs41.
ASSIGN COMPONENT 'CONTA' OF STRUCTURE <wa> TO <val>.
<val> = tab_docs41-conta.
ASSIGN COMPONENT 'BANCO' OF STRUCTURE <wa> TO <val>.
<val> = tab_docs41-banco.
APPEND <wa> to <itab>.
ENDLOOP.
BR,
Suhas

Field-symbols : internal table

Similar Messages

Maybe you are looking for