Field VSBED empty in IDOC DELVRY03

Hi,
I'm generating an outbound idoc DELVRY03 for a delivery. The field LIKP-VSBED is filled. Normally the value in LIKP-VSBED is supposed to be copied in field E1EDL20-VSBED of DELVRY03 idoc. But when the idoc is generate the field E1EDL20-VSBED is empty.
The FM used to generate the idoc is idoc_output_delvry.
Does someone know the reason.
Thanks in advance

Have you stepped through IDOC_OUTPUT_DELVRY?  Specifically, look at form read_data_delivery and make sure it is going into form read_deliveries.  In read_deliveries, make sure vsbed is populated when the deliveries are read into table tab_likp.
If it is populated in the table, look at form process_delivery_header in form fill_idoc_tab_delivery.  Here, the header segments are built.  In form process_e1edl20, there is a form fill_e1edl20 which contains the move from tab_likp-vsbed to e1edl20-vsbed.
If this is populating, verify there isn't any user-exit code that clears the value.  In particular, look at function exit_saplv56k_002.

Similar Messages

  • Empty target Idoc Fields

    Hi to all,
    I have a File to IDoc scenario. I want to obtain in the target IDoc also the empty fields that in my Graphical Mapping are filled with an empty constant. However, when I go on SAP R/3 to see the produced IDoc, I see that all fields that I have mapped with an empty constant, are absent. I don't want this!!! I want to display this fields with no values!
    How can I do this?
    Thanks!

    Hi,
      what you do change the occurenace of the field min occurence : 1 so that when you map the souce field constact then the target field will come..
      after importing the idoc..export the idoc and change the occurence where ever you required and import this using external schema...then rest all the steps...
    why it is absent IDOC meanns..those fields are empty that might be the problem.
      Just try for 1 field if it's work..then go ahead.
    Regards,
    Venu.

  • Inbound Delivery creation in ECC6.0 through IDoc (DELVRY03.DESADV)

    Inbound Delivery creation in ECC6.0 through IDoc (DELVRY03.DESADV)
    From SCM ICH system Supplier creates ASN on the WEBUI & sends it ECC 6.0 using XI.
    This is Proxy (DespatchedDeliveryNotification) to IDOC (DELVRY03.DESAV) scenario
    But at the receiver end i.e. ECC6.0 its giving me error at Tcode WE02 as action is not supported.
    Can you suggest me how to tackle this issue.
    Thanks in Advance.
    Regards,
    N>B.Shanmukha

    hi,
    >>>giving me error at Tcode WE02 as action is not supported.
    there are many segments in delvry03 with a first field - action (like, delete, create, 001,002, etc)
    check all of them as probably you're using one which is not supported
    and this is the real cause of the error
    you can check it like this:
    open this IDOC in We19
    then open action field and F4 and see if the one you use in the idoc is in F4
    change the wrong one and it will work :for 100%
    Regards,
    Michal Krawczyk

  • Updating sales unit VRKME via IDOC DELVRY03

    Dear All,
    I am using IDOC : DELVRY03 , message type SHPCON for updating picked quantities for outbound deliveries from an external WM system.
    Our delivery quantity is defined in sales units (for example : 1 box which contains 10 PC). PC is the base unit of measure for the product.
    Sometimes there is not enough stock in the warehouse so they can pick less then 1 box, for example : 8 PC.
    In that case I need to update the picked quantity from 10 to 8 and also update the unit for the delivery from box to PC.
    IDOC DELVRY03 does not update the delivery unit even that the field is defined in segment : E1EDL24-VRKME.
    Does anyone knows how can I update this field using an IDOC ? BAPI ? or any other option ?
    Thank you very much,
    Miriam Harel.

    Hi Miriam,
    Welcome to SDN.
    Please try BAPI BAPI_OUTB_DELIVERY_CHANGE to update the sales unit.
    Hope this will help.
    Regards,
    Ferry Lianto

  • Batches not getting updated by incoming idoc DELVRY03 (message type SHPCON)

    Hi
        I am using incoming idoc DELVRY03 (message type SHPCON) to update delivery document.I am using field E1EDL24-CHARG to pass batch data.
          However batch number is not getting updated in delivery document. I have verified aspects like batch number is valid etc.
         While updating batch number thru incoming idoc, do I need to supply some other data?
    Please help.
    TIA
    Koustav

    Hi Biswas,
    I think batches are determined automatically in the deliveries while creation and thats the reason it is not getting the batch number in the delivery, if there is no automatic batch dertermination then it will update the valid batch number
    also please check the batch determination procedure and the batch master in MSC2N and availability of materials for that particular batch
    regards,
    Santsoh

  • Mapping file to IDOC "DELVRY03" segment E1ADRM1

    Hi all,
    i have a problem to map a text file to idoc "DELVRY03" using segment E1ADRM1.
    My text file has 2 fields : CUSTOMER_CODE & VENDOR_CODE
    Source mapping : Text File
    Target mapping : IDOC "DELVRY03"
    IDOC should be filled in the following way :
    First entry:
    PARTNER_ID = CUSTOMER_CODE
    PARTNER_Q = AG
    Second entry:
    PARTNER_ID = VENDOR_CODE
    PARTNER_Q = WE
    How can i fill the idoc structure?
    Thanks in advance.
    Regards.
    Dario.

    Hi Harish,thanks for your reply.
    I tried to duplicate segment E1ADRM1 but PI system gets me this error :
    "Target structure has no such path: /DELVRY03/IDOC/E1EDL20/E1ADRM1[1]/PARTNER_ID. Skipping mapping"
    Pls, how can i solve this problem?
    Thanks in advance.
    Dario.

  • IDOC Delvry03 for purchasing document

    Hi all
    This is the scenario
    We recieve from our vendor a shipping notification. I will put this information in idoc Delvry03 but have some problems to post it into R/3.
    Can someone help me to find segment , fields and qualifier i have to put our purchaseordernr and positionsnr in idoc Delvry03. When i run the process through WE19    R/3 dont find this information 
    I have tried E1edl43 and E1edl41
    Hope someone understand
    // S

    Hi KCR,
    Check the Message Type SHPMNT for IDOC types SHPMNT01,02,03,04,05.
    Thanks & Regards,
    YJR.

  • Cancel goods issue using idoc DELVRY03

    Hi,
    IS it possible to cancel goods issue using inbound idoc DELVRY03.
    The field 'qualf' of the segment E1EDL43 says it's possible to do It. But when I try to do IT I have a message saying that the GI has already been performed and that I can't do anything on the delivery.
    Do someone know if It's possible or not using DELVRY03.
    And if not what is the idoc allaowing this.
    Thanks in advance

    Hi omar,
    i have your same trouble.
    Have you found anything?
    thanks in advance

  • DOCTYP and IDOCTP fields are empty

    Hello!
    I'm using XI with the scenario plan driven procurement. I'm able to bring my orders from MM to SUS, but the purchase order confirmations make some problems.
    In transaction SXMB_MONI (SUS) everything is fine, but in R/3 transaction BD87 brings an error: DOCTYP and IDOCTP fields are empty. Detailed info: An IDoc is to be generated whose control record does not have sufficient information in it. Neither the field IDOCTP nor the field DOCTYP has a value. Therefore, the IDoc cannot be stored properly.
    Where can I give the system the information about that?
    Hoping for help,
    Barbara

    Hi,
    Try to solve the problem like this ,
    First check the SWCV is properly configured or not and come back to IR , Refresh  the SLD Cache..
    Next try to activate SWCV-namespace, objects you created one by one..
    refer the below links for cache related issues
    /people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
    XI Runtime cache error: Cache contents are obsolete
    Cache Refresh - SAI_CACHE_REFRESH
    /people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
    Regards
    Chilla
    <i>reward points if it is useful..</i>

  • Previewing data in UD Datasource (S:RSSDK:400 field is empty)

    Hi,
    I followed the steps in creating a datasource for UD connect interface. I was successful in saving and activating the datasource; however, when previewing the data, i am given the prompt: "S:RSSDK:400 field is empty."
    I double checked the database wherein it was extracting data from. There was data present.
    Any ideas on how to solve my problem?
    Regards,
    Ramon

    Hi
    Is there any other UD connect, datasources running without problem?
    have a look at these notes: 874549  and 1056046.
    Hope this helps
    Derya

  • Need to determine if an Expression field is empty in CR 2011

    I have an expression field in a subreport. This field collects a list of computer models to which a given hard drive is assigned. I need the field to always have a border around it even if there is no data. But I have been told by someone on this forum that no border will be generated if the field is empty.
    That being the case, I need to find a way to show a blank, bordered field the same size as the subreport window in the event that the subreport has no data. I need to know if it needs to be done in the subreport itself or in the parent report.
    Can someone please help me out on this? I've run out of ideas.
    Thanks!

    Hi,
    Yes, that is true. The field borders are not drawn when there is no data for that field.
    Here's a workaround though. Create this formula and use this formula field instead of the original database field on the report
    if isnull({database_field}) or not({database_field} > 0) or not({database_field} = "") then
    space(1) else totext({database_field})
    You can then apply borders on this field and you'll see that the field draws the border when there is no value.
    If the field that is in the Subreport, then it needs to be done in the Subreport, otherwise in the Main Report.
    -Abhilash

  • Payment terms and Due date field gets emptied after residual clearing

    Hi
    There is advance of Rs.50000 in Vendor ledger and Invoice of Rs.200000 (with payment term - G019)
    I cleared these two line items (residual clearing). One new line item got created of Rs.150000. When i saw that line item, i saw that there payment term field and due date field got emptied. My requirement is that the original payment term entered in initial invoice document (of Rs.200000) should automatically get populated in new line item of Rs.150000.
    How to fulfill this requirement?

    Thanks for the prompt reply.
    I wanted to ask one more thing. Same way when i do partial clearing (not residual), is it possible to populate the invoice's due date in advance line item. One link is that my invoice reference gets populated advance line item. So i want due date (not payment term) also to get populated in advance line item.
    Please help.
    Edited by: Deepak Agrawal on Jul 29, 2011 11:43 AM

  • Field Mapping of CREMAS05 IDoc..!!

    Hi Gurs ,
    Iam trying to map the following fields in CREMAS05 Basic IDoc Type but unable to find the correct mapping field segments in the IDoc.
    Fields need to be mapped are:
    1.Building Code
    2. Pan No
    Can anyone suggest me which segment and field i need to use for the above fields mapping..? or if i extended my idoc with some custom table how i will map into Standard field .
    Thanks .
    Hemant Gulati(A1)

    Hi Jurgen  ,
    Thanks for Reply .
    Vendor Master Idoc  CREMAS05
    i have extended my idoc with some zfields . in zfield i have Building code and Pan no
    like zbuild and zpanno i need to map these in ADDR1_DATA-BUILDING and J_1IMOVEND-J_1IPANNO respectively .
    Thanks & Regards
    Hemant Gulati(A1)

  • Data in dropdown list field are empty in PDF form

    Hi all.
    Viewing a pdf form created with SAP interactive Forms offline method, the data in the dropdown list field are empty.
    The data in the dropdown list field are generated by xml file produced by an abap report.
    The problem occurs opening the form with Adobe Reader 8.1 or higher. Using Adobe Reader release 7.0.9 everything is ok.
    Do you have any suggestion?
    Thanks in advanced.
    Best Regards.
    Moreno

    Hi Otto,
    the only release of Adobe Reader that work is 7.0.9. Release 8.1 and 9 have the same problem where the data in the dropdown list field are empty.
    At the end of the trace file in Adobe Reader 9.0.3 I find this error message:
    "Invalid version: The current version of the XFA template model exceeds the capability of Acrobat / Adobe Reader 7.0.5."
    The form has been created using Adobe Lifecycle Design 7.1.
    Any idea?
    Thanks
    Moreno

  • Office 2010 Don't print blank lines when data fields are empty

    How do you do this in office 2010?  Where do we go now?
    This used to be under the Tools menu in previous versions:
    On the Tools menu, click Mail Merge.
    In the Mail Merge Helper dialog box, click Merge.
    NOTE: You must select the main document and data source for the merge before doing step 2.
    In the Merge dialog box, under When Merging Records, click either:
    Don't print blank lines when data fields are empty.
    -or-
    Print blank lines when data fields are empty.
    Click Close in the Merge dialog box, and then click
    Close in the Mail Merge Helper.
    NOTE: If you made no changes in the Merge dialog box, the
    Close button is not available. Click Cancel instead.
    Back to the top

    Hi,
    In Word 2007 or Word 2010, you can add
    Mail Merge Helper to the Quick Access bar, and perform the steps then.
    To add the
    Mail Merge Helper command in the Quick Access Toolbar in Word 2007, follow these steps:
    a.                 
    In Word 2007, click the
    Microsoft Office Button, and then click Word Options >
    Customize.
    In Word 2010, click File > Options > Customize Ribbon.
    b.                 
    Click
    All Commands in the Choose commands from, and then click
    Mail Merger Helper in the Choose commands from list.
    c.                  
    Click
    Add, and then OK.
    Best Regards,
    Sally Tang

Maybe you are looking for