Fields and Table for Delivery address in a PO
Hi Gurus,
I want to find out the fields and the corresponding table for the delivery address in a PO (line item details). It is the address of the plant. I searched the tables ADRNR, ADRN2 and one customized field (/GLB/Ship_to) in the table EKPO, but of no help. I can find out from other tables the address of the plant, but I want to go to a table for PO, where I can have the delivery address/ship to address.
Please help.
Thanks,
Kumar
Hi
For Plant Address, check the table T001W
If you want complete address details, take the ADRNR field value from T001W and pass it to the field ADDRNUMBER of table ADRC, you will get the details.
Normally addresses are stored in the table ADRC. If you gave any other Delivery Address in the PO, instead of Plant, get the value of ADRN2 from EKPO and pass it to ADDRNUMBER of ADRC and you will get the address detials.
Edited by: Arun R on Dec 17, 2010 2:39 PM
Similar Messages
-
What is the field and Table for "Batch Class" and "Class Type" in QM.
Hi All,
What is the field and Table for "Batch Class" and "Class Type" in QM.
Thanks,Hi,
For batch class the class type value is '023' . This you can find from KLAH table and the fileld for class type is KLART..
And also all the data related to batch class are found in tables INOB, KLAH,KKSK and for the characeteristics of batch materials you can refer AUSP table.
In INOB table, for batch class, you need to give 023 in KLART field and value MCH1 in OBTAB filed.
Please check this and let me know if this you need any more details? -
Reference field and table for AUFK for F4 help in alv.
Hi All,
I need to put F4 help on ALV for order no (AUFK) what is the reference field and table for that?
i tried giving field as aufk and table as ccss but its not working.
ls_fcat-ref_field = 'AUFNR'.
ls_fcat-ref_table = 'CCSS'.
Thanks & Regards,
Ruchi TiwariHi,
Try this.
Set the f4 help for the field in the fieldcatalog
ls_fcat-f4availabl = 'X'.
1. Create a event of ONF4 for the alv grid.
2. Set the event handler.
3. Append the field for the F4 help in the internal table and call the below method
CALL METHOD g_mprn->register_f4_for_fields
EXPORTING
it_f4 = i_f4.
4. create a class definition and implementation
refer sample pgms (BCALV_F4, BCALV_GRID_EDIT_DELTA and BCALV_GRID_EDIT)
Hope this may be helpful.
Regards,
Sharin. -
Field and Table for PGI status updation
Hi All,
I want to know in which field and table the PGI status will get updated.
i.e. once we do the PGI for a delivery in which table will this PGI status gets updated.
Thanks in advance for help.
HariniHi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed ( This means its complete open)
B Partially processed ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed ( This means its completly open)
B Partially processed ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK -
Field and Table for Pension Plan
Can anyone tell me what are the field name and table name in Pension plan
Hi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed ( This means its complete open)
B Partially processed ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed ( This means its completly open)
B Partially processed ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK -
Field and table for Credit block
Hi All,
I want to know which tabl and field gets updated when a sales document is blocked for credit.
the requirement is we want a report which show the list of sales orders along with the credit block status
thanks in advance.
hariniHi Harini,
You u can get the Overall Credit Status from the Table "VBUK" (Header Status and Administrative Data) in the Field "CMGST" with below mentioned values and Description.
Blank - Credit check was not executed/Status not set
A - Credit check was executed, document OK
B - Credit check was executed, document not OK
C - Credit check was executed, document not OK, partial release
D - Document released by credit representative
Hope it will help..
Regrds,
HP -
Field and table for PO item number in Invoice(MIR4)
I have 6lines in PO and when I looked at MIR4 (the invoice) .It has only 3 lines which are invoiced.
In mir4, we have a column which says which lines got invoiced for me 2, 3 and 5. Is there any table which will hold this fields data for invoiced lines.
That field is called " Item Number of Purchasing Document".
Please helpHi,
For MIR4, table and field is RSEG-EBELP.
Cheers ! -
Techical field ( and Table ) for Promotion type for a particular Customer
Hi All,
Where can I find the promotion type for a particular Customer?
Thanks,
SanjeetHi Suman,
I think you are talking about Transaction VB33.
Table - KONA (Rebate Agreements)
Field - KNUMA (Agreement (various conditions grouped together))
Structure - RV13A (Input/Output Fields for Price Element Maintenance)
Field - KNUMA_PI (Promotion)
And if you want based on particular customer..
Table - KOTE003 (Customer)
Field - KNUMA (Agreement (various conditions grouped together))
Table - KOTE004 (Customer Hierarchy)
Field - KNUMA (Agreement (various conditions grouped together))
Best Regards,
Sayak -
Need field and table for spare part material and price for a given material
Hi,
In need to create a report with following fields:-
Customer Material spare part material spare part description price currency.
From which table and field I can get all this information.Please guide me.
Hint. cl30n transaction for material managemant.
vk13 transaction for price maintenace.
Regards.CL30N is a general transaction that can be used for any classification, but material master maintenance is usually MM01/MM02 or MM41/MM42
Material description can be taken from table MAKT
customer from table KNA1
The question is what you are going to analyse? where do material and customer tie together? do you do the analysis on sales orders VBAK and VBAP ? or invoices VBRK and VBRP? or customer material info record KNMT?
or do you capture this info in classification? then you get the values from AUSP
Edited by: Jürgen L. on Aug 3, 2010 9:42 AM -
Database fields and tables for BOM
Please help on following points which are from requirement on the new program i have to develop.
(1) Source the Material Quantity
The new program will need to search all plant/s if the plant field in the search criteria is blank, or alternatively, search the material, plant and storage location criteria combination, for the current unrestricted stock quantity of material/s.
i can find this Unrestricted stock value from the material master field MARD-LABST. am i correct?
(2)Locate the Bill of Material High Level materials.
When the quantity of material/s at the plant/s is sourced, the program will then need to goto the Bill of Material (BOM) functionality in SAP to find the Valid (on the current date) High Level material/s, associated with the BOM Low Level material number entered into the program screen. If the materials entered into the program matnr field is not a Low Level BOM, then report the error in the spool report.
this is the point where i am stuck,please tell me how cani do this. i mean from which tables i have to fetch the high lavel material associated with BOM low level material number. also i don't know how do we identify the high and low lavel materials in a BOM.
Finally i have to create a batch program for Transfer Posting (Material to Material Transfer) to convert Low lavel BOM material into high lavel BOM via transaction MB1B, which can be done only when above secoond issue is resolved.BOM
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
Regards,
Santosh -
Field and Table name for purchaser
I want to know the field and table name for purchaser id and purchaser name.
Plz help me.Dear
Purchaser name are define in Header level data in Purchase Order EKKO & Purchase ID define as a Purchasing Group
Purchser Name EKKO-ERNAM
Purchase I D EKKO-EKGRP
Regards
Aamir -
Want field and table name for RESERVED coloum in MMBE
Hi ,
There is a RESERVED coloum in MMBE and I want this * RESERVED* coloum in MB52 .
I got to know that Field related to this RESERVED coloum is BDMNG coming from table RESB .
To confirm the field and table I checked the value in BDMNG by putting join on MARA and RESB where MATNR = BAUGR.
But I got value in BDMNG is 50 and in MMBE it is .228 for that material.
Please tell me field and table name for RESERVED coloum. and hoe to join MARA and RESB to get exact result.
Thanks and Regards,
RanuHi,
Mara-matnr is not equal to Resb-matnr and it shows no record if i do like this.
But Mara-matnr is equal to Resb-baugr, and it gives me 1 record .But porblem is that i dint get BDMNG field matching with mmbe RESEVERD coloum. -
Hi,
I want Serial number field and table,
Scenario like this,for returnable packging material we have assigned serial numbers,mtrl type is LEIH,so for tracking of RTP material now we are going to Develop one Report for this i need ur Help.
Logic is:1)Matrl doc at the time of Delievery.
Qty,Posting Date,Customer,Mvt type,Serial numbers for all.
Beacause at the time of Del we are mentioned all serial numbrs.
2)Material Document at the time of GI.
Same field as mentioned as above.
After that,3)System is to Calculate How many Matrl are deliever to Custmer upto current Period.Say 10.
4)Calculte How many Matrl are Recieved from the Custmer upto current period.say 5
5)Del - Issue=Total Number of Material is in Customer side.Say 5
6)According to the Serial Number wise system has to calculate in which month delieverred matrl is in still customer side.
(Ex PGI date 20.02.2007 3 qty
Serial Number 1,2,3
Issue date 20.03.2007 2 qty
Serial Number 2,3
Serial number 1 still is in Customer side.
Age is 2 month)
I am giving simple ex.
so pls any body is having this idea pls Shared with me.
Thanks
RaghuHi Raghu,
Check table SER01(Document Header for Serial Numbers for Delivery).
OBJK is the object table and you will have SERNR as serial number in this table.
check table EQUI
EQUI -SERGE
EQUI-GERNR.
EQUI-SERGE is Manufacturer serial number.chk if this is the one u r looking for.
MARC-SERNP.
key in plant and material in this table to fetch the Serial number profile of the material.
Check in IKPF AND ISEG Tables... ( inventory )
MSEG~EQUNR
Hope it will hep u
Regards
Hareesha -
Creation of New Table for Delivery Output Type.
Hi Guys,
I need to replace an existing table by creating a new Table in the existing Access Sequence with the combination of "Ship to Party/Product Hierarchy".
Logistics>Shipping>basic Shipping functions>Output determination>Maintain Condition Tables-->maintain output condition table for deliveries.
I am choosing a new table by the name 902, but i am not getting the field " PRODH Product Hierarchy" on the right hand side to choose from.
I checked the field catelog also. Firstly the field catelog was also not having the field, and then i added the field in it by choosing new entries.
I guess i am missing some step in between, thats why the new field (PRODH) is not showing on the right hand side while creation of the condition table.
One more thing, when i am seeing the Field Catelog, i am able to see a very large number of fields, then why only a few are appearing during creation of a new table??????
Can you guys correct me and let me find a way.????
Thanks very much indeed.
Regards,
VivekHi If u have already the field in FC u can add with new entries .
Try with ,enter t- code <b>SE11</b>, enter <b>KOMB</b>- it will ask for access key get from basis and add u r Field catalog
Field catalog for condition key: output determination
If at all u want a new field tao add to u r FC u Can try with userexit.
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields.
The fields which are not in either of the two tables KOMK and KOMP
cannot be used in pricing .Sometimes a need arises when the pricing
is to be based on some other criteria which is not present in the form of fields in either of the two tables.
This problem can be solved by using USEREXITS which are provided for pricing in SD.
Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP
program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely
created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that
has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose
includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:<b></b>
Message was edited by:
SHESAGIRI GEDILA -
Storage Location Wise Stock Value field and Table
Hi ,
Please let me know the storage location wise stock value field and table.
Regards
SureshHi Suresh,
As per my understanding it is not possible in a single Table.
If this is required for customized Z report then use this logic it may gives the correct information.
In the combination of MARD and MBEW.. From MBEW you can get the value for each Base Unit of Measure then multiply that value with storage location stock.
It may usefull to u..in the mean time i will try for some other option.
Please revert if u have any query.
Regards
Durga Sana
Maybe you are looking for
-
My daughter told me her Mac mini isn't booting up past the grey screen. I put in the install disk and started it up pressing "C" and used Disk Utility to attempt to figure out what's up. I got the following error message: Could not repair due to unde
-
Import Key Mapping of many Remote Systems in one step
Hi, I have to update the key mapping of a flat table. My problem is that I have more than 30 remote systems. Is it possible to import the key mapping of more than one system in one step? If there is now way to do it with Import Manager can I use APAP
-
My OSX 10.5.8 won't type letters f,r and
my OSX 10.5.8 won't type the letters f,r and number 4, also the caps lock will not work, How can I fix this? It happened after I held the D key trying to get the computer to do a self diagnostic. I was also trying to change the language on the compu
-
Dear Gurus, I want executing mass deletion of the vendor using XK99 for Vendor (3000) and puchasing organization. for which i hve seleted tables: vendor master records purchasing organization data fields: del flag. porg (Lfm) = LFM1-LOEVM, but upon s
-
Hi Experts, First time, transport objects form DEV to QTY server in SAP PI 7.31 dual stack. My scenario is RFC to JDBC. Activation is done, but when try to test RFC destination from ECC qty (which freshly created in ECC QTY) getting some error in sen