Fields mandatory on contract...

Hello all,
how to make these fields mandatory on contract-plant, shipping point, contract start & end dates . what would be best way- user exit or transaction variant. as our requirement is when ever we trying to save the contract system should not allow us. Please advice?( we cant make incompletetion log as same time we need some fields optional also)
Thanks
RK

hi RK
Thanks For your reply vishal but in my case i need to make some fields mandatory(means cant save the sales order) as well as optional(can save but doc is incomplete- normal scenerio) so i think through incompletion procedure i cant satisfy both the conditions. please suggest alternative approach
for same document type if you wish to perform both scenarios then that is not possible by any means.
If both the document types are different then it is possible to go by incompletion procedure
Say for DOCU TYPE 1 you can maintain 1 incom. procedure where it will give error
For DOCU TYPE 2 don't miantain those fields in incomplet procedure

Similar Messages

Making storage location field mandatory at contract level

Dear All,
I want to make the field storage location mandatory at contract level.Is there any configuration setting to make storage location mandatory at the time of contarct creation.
please suggest.
thanks in advance
ravi k

sapuser k
1. IMG --> SD --> BF --> Log of Incomplete Terms --> Define Incompleteness procedure (Double Click)
Choose "A - Sales Header", Click New Entries, Create say 55 - Contracts
Click "New Entries", Enter Table = VEDA, Choose Field (Storage Location Field ) and Status.
Click Save
2. IMG --> SD --> BF --> Log of Incomplete Terms --> Assign Incompleteness Procedure
Assign Procedure to sales document Types
WK1 = 55
Then Click save
Regards
Sathya

How to make Target Value field mandatory in WK contracts

Dear All,
Can the Target Value field in quantity contracts be set to a mandatory field like in Value contracts?
Regards.

Hi
quantity contracts are used when you would like to limit quantity irrespective of the value of contract. Therefore quantity field is made mandatory here.
similarly value contract is used when you would like to limit value irrespective of quantity of goods.Therefore value field is made mandatory here.
Hope it helps you.

How to make extended field mandatory in Master Agreement

Hello All,
I am new to SAP CLM, and I have requirement where one extended field in master agreement needs to be made as mandatory field.
I tried in extension definition but check box to make it required is disabled and I am unable to find other way to do it.
Can some one help me and Please let me know how make extended fields mandatory in CLM.
Regards,
Prabhat

Hi
This could be achieved using Page Customization.Go to Setup-> User Interface-> Page Customization, open master agreement object (create new with UI ID:contracts.contract.ui.buyside.default if doesn't exist ) and add a new customization for extended field with Property set to Required.
Regards
Mudit Saini

Radio Button to make other field Mandatory

I have two Radio Buttons that I want when clicked on (either one) to make a Number Field mandatory. I have viewed many websites on setting a mandatory field but the script I am using will not work. I have tried a couple ways of writing it but I seem to be missing something.
I have used this script in the Show of: click & change
Here is the script that I'm using right now.
if (this.rawValue==1)
AssemblyNu-1.mandatory ="error";
else
AssemblyNu-1.mandatory ="disabled";
And this one:
if (this.rawValue==2)
AssemblyNu-1.mandatory ="error";
else
AssemblyNu-1.mandatory ="disabled";
Thanks,
HHud5757

So, I put a quick form together to test your code.
On the change event of the radio button list (not the radio button itself), I added:
if (this.rawValue == 1) tfTest.mandatory = "error";
else tfTest.mandatory = "disabled";
In my case, the radio button with the value of 1 is the one I want to make the field mandatory. If you want either button to make it mandatory, then use:
if (this.rawValue == 1 || this.rawValue == 2) tfTest.mandatory = "error";

How to make a field Mandatory in a Table view?

How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.G

Hi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM

How to make a field mandatory in SAP Business one ?

How to make a text field mandatory in SAP Business one?

hi nishant,
check this link
Making fields mandatory
To Set Mandatory Fields in Documents
Jeyakanthan

How to make a field mandatory in billing

How to make a field mandatory in billing document,if m right with the help of incomplition log but how.....
plz reply the full configuration.

Hi Mohan,
We normally create a billing document with reference any other document say Order or delivery.
so, all the necessary information in the invoice will be taken from preceeding doucments. Thats way in the order level we check for incompletion log. If any important data is missing in the order level then the succeding documents will not be created.
Thats way in the billing documents all the necessary information will come automatically either from preceeding documents or from master data.
Still you want to make any field mandatory, you can do these by modifieing Billing documents user exists,you can make which ever the fields are mandatory and to be checked before saving. so when you are going to save the invoice, it will check if these fields are maintained or not.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen

How to make all fields mandatory in sales order T- code VA01 initial screen

Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar Reddy

Hi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad

Need to Make end customer field mandatory in sales order form.

I need to make end customer field mandatory when sales channel entered as some value...
for this i have used when validate record on order form
when i enter a value in sales channel as desired value the form is getting saved automatically and the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
let me know the sequence how it works if any one knows.

Sanni,
>
when i enter a value in sales channel as desired value the form is <b>getting saved automatically</b> and (then) the <b>field is getting mandatory</b>
but my requirement is to make field mandatory and then to save the order.
>
Which trigger are you using to do the "getting saved automatically'?
Does this trigger fire before the trigger that is making the field mandatory?
Regards,
PS: Is this an Oracle EBS query? If yes, this is the wrong forum
Edited by: Prabodh on Jun 14, 2012 4:48 PM

Form personalization : sales order form (line) to make subinventory field mandatory

I have requirement to make sub inventory field mandatory in Sales Order Line, I tried using Form Personalization on 'When Validate Record' and making the fields required. But even though the field is showing as yellow but system allowing me to save the order line without this fields? Any input?
thanks
challa

Forms Personalization is a feature of the Oracle Enterprise Business Suite (EBS) not a feature of Oracle Forms. Please post your question in the EBS General Discussion forum. If you have a general Forms question, by all means, ask it here!
Craig...

How to make Sales Office field mandatory in VA01 initial screen?

Hi,
How to make Sales Office field mandatory in VA01 initial screen? I mean in the first screen where we enter the document type and the sales area?
Regards,
Ajit

Dear Deepak,
Thanks for the clarification.
But, as far, I have understood the query - it is very simple and that is..
Whenever one creates a Sales Order (T.Code: VA01), Parameter: Sales Office needs to be mandatory (for all Sales Order, irrespective of Customer Account).
Until-unless, user won't enter the parameter: Sales Office, System will not lead to next page (now, here we need to enter Customer/ material etc...).
I have answered the query, in this regards, only.
Best Regards,
Amit.
Note: Pls. correct me, if I am wrong. Thanks for everyones guidance.

How to make tax classification field mandatory in sales order ?

Hi,
while creating sales order, " how to make tax classification field mandatory ".
Please tell me the procedure.
In tcode OVA2. what are the entries for fields,table.
Regards,
sapsduser

Dear ,
Could you please share why you want to make tax Classification field mandatory in sales order.
Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
Tax is calculated based on the ship to party.
Hope this will help you.....
Regards,
Manoranjan.

Making task list field mandatory in creation of maintenance plan?

Dear All,
I need your help in configuration of Making task list field mandatory in creation of maintenance plan. I checked with sceen variant config but that also not giving me any option to make the field mandatory.
Is there any note or user exit for it?
Regards,
Kaushal Rai

Dear,
Pls check the exit IPRM0004:Maintenance plan / item: Customer check for time "SAVE".
Regards
Sunil

We want only Division field Mandatory in Basic Data 1 View (T Code MM01)

Hi,
In Logistics u2013 General-> Material Master-> Field Selection-> Maintain Field Selection for Data Screens, for Field sel. group 90, we selected the Reqd Entry Option Button to make Division field in Basic Data 1 as mandatory.
Due to this fields like Sales unit, Unit of Measure Grp, DChain-spec. status etc. became Mandatory for T Code MM01
We want only Division field Mandatory.
Is there any way to create our own Field sel. Group where in we could assign the Fields we want to make mandatory?
Please guide.
Regards,

Hi ,
Goto the Traansction code OMS9 and enter the FIELD SELECTION GROUP as 20 which is the field group for Division
now goto the details and in change mode you can find the FIELD like HIDE, OPTIONAL, DISPLAY , REQUIRED ENTRY
Chcek the radio button of Required field entry and save it
Now once you enter the MM01 , there you will find Division as Mandatory field
regards,
santosh

Fields mandatory on contract...

Similar Messages

Maybe you are looking for