Fields missing if no value

Hi, can anyone help me?   I use abap proxy to tranfer a table back, but if any field in the table has no value, the field is missing in sxi_monitor.
thanks.

Hi,
When a field is not populated, it will not be shown in the XML message displayed in SXI_MONITOR. This is standard functionality.
Kind regards
Colin.

Similar Messages

  • Storage location field missing while doing GR with PO number

    When I receive goods from a PO, the storage location field missing from MIGO with 101. Material been extended with storage location and entered in PO. But sloc field totally greying out while I receive goods with PO.
    I tried other way to receive goods , but storage location disappears when I save it.
    MMBE shows stock as on order before reciept , after  I post goods, material document created but stock disappears. Not even in the plant.
    Can anyone help , please?

    <i>The following from other message thread solved my problem....</i>
    Stephen Birchall  
    Posts: 1,095
    Questions: 1
    Registered: 3/27/07
    Forum points: 1,566 
       Re: Material Classifications and Purchasing cycle  
    Posted: Apr 23, 2007 9:26 AM    in response to: Dushyant C Koth...       Reply      E-mail this post 
    Hi,
    You create the material in MM01 and select the non-valuated stock material type.
    When you create a PO for this material the system will ask you to enter an account assignment category (such as K for cost centre etc.) Indicate the GL etc that you want the costs to be posted to (Stationery, office supploes etc.).
    When the items are received, post the GR as normal (with MIGO). At GR the total value of the items will be posted to the correct financial accounts and the stock quantities will be updated.
    Then when you have consumed anything you post a goods issue (MB1A or MIGO) and this does not post anything to the financial accounts (it was all posted at GR) but it does reduce the stock figures.
    This process is ideal for ANY low value / high volume items, because the stock is managed correctly but you do not have many hundreds of tiny financial posting as each low value item is consumed.
    Steve B

  • Fields missing in Infoset.

    I have an infoset that contains 3 master data objects.  Some of the attribute fields do not show up in the infoset.  Does anyone know why some fields show up and other do not?
    Thank you
    Aaron

    Hi Oscar,
    The field missing is not set to attribute only.  I checked other fields that do show up in the infoset and they are not marked as attribute only.  Any other ideas?
    Thanks
    Aaron

  • FIELDS MISSING

    Hi,
    When i replicated CO-PA data into BI. It created two DS's:
    0COPA_RCTY AND 1_CO_PA_XXXXXXX
    I created an Infosource and transfer rules for 1_CO_PA_XXXXXXX but there are a few fields missing that i do see in the operating concern such as:
    ARTNR=0MATERIAL
    KNDNR=0CUSTOMER
    BZIRK=0SALES_DIST
    Why are these fields not in the Infosource since they are in the operating concern?
    Where would they be?
    Thanks

    Delete the data source and then need to re-create using KEB2 transaction. While re-creating the data source use the same old name so that there won't be any changes in the BW side when you need to assign the data source to info-source. Just replicate the new data source in BW side and map the new field in info-source.
    (you can also try, goto KE24 and edit the dataaource and add your fields not 100% sure of it works)
    how to select fields refer doc:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6

  • Fields missing on FB60

    Hi,
    I have a couple of questions.
    1. I see there are a few fields missing on the line item level on FB60. It's not the case for development or testing environment. But in Production it's happening. Does anyone know how to get these fields back?
    2. Is there a transaction where I can clear multiple documents at once instead of one like FBRA?
    Thanks

    Hi!
    Field is missing in FB60 screen, please brief which field you are missing and whether its comes earlier, if so please check is there any variant create, u can see this variant at end of the line item screen in top position. when u put your cursor there it will show u the configuration, click there and see if any variant is used, if so remove that and put tick on use as standard setting and try.
    FBRA is not for clearing the document, but it reset or reset and reverse the clear document.
    for clearing of vendor tcode is f-44
    for clearing of g/l       tcode is f-03
    for clearing of customer tcode is f-32
    Rakesh

  • Fields Missing in datasource

    Hi friends,
              Please help, I have some fields missing in my data source , but they are available in the extract structure of that data source..what do I do now, to see the same fields in my data source also?? should I ahve to append the data source??
    thanks alot in advance,

    Hi
    I think you didn't appended the fields to the append structure.
    Try to append the fields in the append structure and save ands activate it. and again activate the extract structure.
    then you can see in RSA6
    Hope this helps
    shiva

  • Field with a default value from another field

    I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
    Topic
    Acrobat 5 - field with default value of another field
    Ben PF - 03:31am Mar 23, 2007 Pacific
    How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
    I've tried, but I just can't figure it out!
    Any help much appreciated.
    Ben
    | Back to Topic List | Bookmark | Subscribe
    To start a NEW discussion click on the Back to Topic List link and select Add Topic.
    If you are in an archive forum please go up to the main topic list (archives are read only).
    Messages
    2 messages. Displaying 1 through 2.
    First Previous Next Last Show All Messages
    Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
    This, or some variation of this, should work:
    if(this.getField("date2").value == ""{
    this.getField("date2").value = this.getField("date1).value;
    | Bookmark back to top
    Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
    Thanks very much.
    I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
    Thanks for your help.
    Ben

    Okay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
    Put this:
    this.getField("myField2").value = event.target.value;
    Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
    I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes.

  • Crystal Report VS2005 - Table fields missing in Database Expert

    Hi,
    I am having a problem with the Crystal Report comes with Visual Studio 2005. I am trying to develop a customized report for SAP Business One. When I try to add two tables using the Database Expert, there are certain fields missing in the LINK page. This is a big problem for me because I need to link that field with another table. Oddly, it doesn't seems that there are anything wrongs with the missing fields. If I click OK and check at the Field Explorer, the missing fields are there!!!
    In other words, it is missing only at the Database Expert --> Link Tab. Anyone having the same problem? Is this a known issue or any patch that I can apply to resolve this issue?
    Thanks in advance for your help.
    Regards,
    Harianto

    Try this link to resolve your issue:
    Full Outer Join option for SQL Query and BW Query grayed out
    Thank you
    Don

  • How to populate Initial value of a field from another item value

    Hi
    In my expense report entry screen I have justification and description fields. My description field is getting value from the database. I want justification field also get the value same as what description has. Could you guide me on how to achieve this via personalization?
    Thank you.

    Hi,
    user622444 wrote:
    In my expense report entry screen I have justification and description fields. My description field is getting value from the database. I want justification field also get the value same as what description has. Could you guide me on how to achieve this via personalization?---Copy the viewAttribute name of the description
    ---Paste it in Justification view Attribite property.
    Regards
    Mehar Irk

  • Some fields missing from the Information interface

    On iTunes 12 I can’t find the "Description" field that was in the Video page.
    The field still shows in the list of songs, but it doesn’t appear on the new "Information" interface. And I don't think this is the only field missing compared to the previous Information interface. Can anyone help? Thank you.

    ... before you click Get Info.
    tt2
    YES!
    Thank you turing! That really helped.
    (it seems a bit of a complication to me, the system was just fine as it was, but what do I know?)

  • Powerpivot pivottable - I can't add or drag a "value field" from the pivottable field list into the "values" section.

    I built a pivottable using Powerpivot.
    Initially, I can add or drag any data field I want to columns, Rows or the Values area inside the field list (those 4 squares). However, as times goes by...suddenly... I just no longer can add or drag a "value field" from the pivottable field list into the
    "values" section. 
    Does anybody know how to fix this problem ?

    Hi Bin Long,
    I tried what you suggested.
    I believe that there is a glitch in the Powerpivot field list (where you find the 4 squares for columns, rows, values, filter)
    When I initially create a pivottable with powerpivot, everything works fine when I am adding field list items to the the columns, rows, values sections, filters.
    However.....IF I close the powerpivot field list or if I save and close the excel file...then I cannot add more items to the "values" section.
    I can comment about one thing that seems different in my powerpivot field list. When I can no longer add items to the "values" section, I realized that in the TOP section of the field list I see in bold letters a summary of the items that are SUM ∑ in the "values"
    section.
    Does anybody know how to fix this ?
    Thanks.

  • Apex 4.0: Change the Search Field to a Multi Value Check Box IR

    I am new here, but hoping to be active :)
    Well, now I am focusing on Apex 4 and I find really new things here. And even new order to develope needs time to get used.
    Still, I am trying to change the Search Field to a Multi Value Check Box in IR. I have found how to make it in Apex version 3, but not at 4 any more.
    Tutorials for apex v.3 write:
    1.Click Edit Page 1 on the Developer toolbar.
    The Page Definition for page 1 appears.
    2. Under Items, click P1_REPORT_SEARCH.
    3. From Display As, select Checkbox ans so on...
    But I do not find any word "Items" in IR and especially P1_REPORT_SEARCH (I assume this should be by default). Under "Report Atributes" I find "Search bar" region, just there is no option for that. Is here any way to make search with checkboxes in v4?

    Hi,
    Tutorial you have check for APEX 3.x probably works still in APEX 4.x if you use classic report.
    As I understand you have now create interactive report that provide out of box search features.
    There is no option to change IR search text field to multi select item.
    What you can do with IR, is hide/disable search field.
    Then you create multi select item and use it in report query where clause.
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

  • Can you use a formula field as the default value of a parameter?

    I'm wondering if you can use a formula field as the default value of a parameter. I have an date parameter that is being pulled from a stored procedure. When I run the report, it defaults to the current date and time. I would like it to default to he current date and have the time be 00:00:00

    Hi,
    Unfortunately, you cannot use a formula field as the default value of the parameter.
    And, to get rid of the current time and show 00:00:00, all you need to do is Edit the parameter and set the 'Default Value' to 00:00:00. This will take care of the time portion, however the date portion would be set to the year 1899 and not the current date.
    Hope this helps!
    -Abhilash

  • How to make the  column red in field catalog if its value is negetive

    i am displaying 25 columns in a field catalog ,
    if the value of the cell is negative it should appear in red colour .
    for ex,
    mat.no      custno      value
    1                10             10
    <b>2                20             -10</b>
    3                 30             20
    note:
    only cell which is the intersection of second row and third column
    should appear red .
    not the whole row or column

    Hi Balaji,
    Run this code for coloring specific coloum in a row when the value of that column is negative
    REPORT zex34 .
    TYPE-POOLS: slis.
    INCLUDE <icon>.
    DATA: it_fieldcat  TYPE slis_t_fieldcat_alv,
          it_fieldcat1  TYPE slis_t_fieldcat_alv..
    DATA:  x_fieldcat  TYPE slis_fieldcat_alv,
            x_fieldcat1  TYPE slis_fieldcat_alv.
    DATA: it_events TYPE slis_t_event,
          x_events TYPE slis_alv_event,
          i_program LIKE sy-repid.
    x_events-name = 'END_OF_LIST'.
    x_events-form = 'LIST_MODIFY_OUPUT'.
    APPEND x_events TO it_events.
    data : count type i,
           calc1 type i value 1,
           calc2 type i value 1,
           TOTREC TYPE I.
    DATA: BEGIN OF it_mara OCCURS 0,
          matnr LIKE mara-matnr,
          kunnr LIKE mara-kunnr,
          value type i,
          flag(1),
         END OF it_mara.
    SELECT matnr
           kunnr
           UP TO 10 ROWS
          INTO corresponding fields of TABLE it_mara
          FROM mara.
    loop at it_mara.
         count = sy-tabix mod 2.
       if count eq 0.
         it_mara-value = calc1.
            calc1 = calc1 + 6.
         it_mara-flag = ' '.
       else.
           calc2 = calc2 - 5.
         it_mara-value = calc2.
         it_mara-flag = 'X'.
       endif.
       modify it_mara index sy-tabix.
       TOTREC = TOTREC + 1.
    ENDLOOP.
    i_program = sy-repid.
    DATA:l_pos TYPE i VALUE 1.
    CLEAR: l_pos.
    l_pos = l_pos + 1.
    x_fieldcat-seltext_m = 'MATNR'.
    x_fieldcat-fieldname = 'MATNR'.
    x_fieldcat-tabname = 'IT_MARA'.
    x_fieldcat-col_pos    = l_pos.
    x_fieldcat-outputlen = '18'.
    APPEND x_fieldcat TO it_fieldcat.
    CLEAR x_fieldcat.
    l_pos = l_pos + 1.
    x_fieldcat-seltext_m = 'KUNNR'.
    x_fieldcat-fieldname = 'KUNNR'.
    x_fieldcat-tabname = 'IT_MARA'.
    x_fieldcat-col_pos    = l_pos.
    x_fieldcat-outputlen = '10'.
    APPEND x_fieldcat TO it_fieldcat.
    CLEAR x_fieldcat.
    l_pos = l_pos + 1.
    x_fieldcat-seltext_m = 'VALUE'.
    x_fieldcat-fieldname = 'VALUE'.
    x_fieldcat-tabname = 'IT_MARA'.
    x_fieldcat-col_pos    = l_pos.
    x_fieldcat-outputlen = '10'.
    APPEND x_fieldcat TO it_fieldcat.
    CLEAR x_fieldcat.
    l_pos = l_pos + 1.
    x_fieldcat-seltext_m = 'FLAG'.
    x_fieldcat-fieldname = 'FLAG'.
    x_fieldcat-tabname = 'IT_MARA'.
    x_fieldcat-col_pos    = l_pos.
    x_fieldcat-outputlen = '1'.
    APPEND x_fieldcat TO it_fieldcat.
    CLEAR x_fieldcat.
    l_pos = l_pos + 1.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
         EXPORTING
              i_callback_program = i_program
              it_fieldcat        = it_fieldcat
              it_events          = it_events
         TABLES
              t_outtab           = it_mara
         EXCEPTIONS
              program_error      = 1
              OTHERS             = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    *&      Form  LIST_MODIFY_OUPUT
          text
    FORM list_modify_ouput.
      DATA: l_matnr LIKE mara-matnr,
            l_kunnr LIKE mara-kunnr,
            l_value type i,
            l_index TYPE sy-index.
      CLEAR it_mara.
      DO 20 TIMES.
        CLEAR: l_matnr, l_kunnr , l_value.
        READ LINE sy-index INDEX sy-lsind
             FIELD VALUE it_mara-matnr INTO l_matnr
                         it_mara-kunnr INTO l_kunnr
                         it_mara-value into l_value.
    *3lines are reserved for alv headings , so i am reading it form 4th
    *line so 4th line is equal to 1st line of itab
        IF sy-subrc = 0 AND sy-index GE 4.
          l_index = sy-index - 3.
          READ TABLE it_mara INDEX l_index.
          IF sy-subrc = 0 AND it_mara-flag = 'X'.
    *-Modifying current list
            MODIFY LINE sy-index INDEX sy-lsind
                       FIELD FORMAT it_mara-VALUE COLOR 6 INVERSE.
          ENDIF.
        ENDIF.
      ENDDO.
    ENDFORM.

  • Field names with now values behind are written to RDI-File?

    Dear experts,
    I have a question concerning the RDI file format.
    The specification of RDI file said the following about the structure of each RDI file
    "field name" is placed in position                 :        104     
    "field length" indicator is placed in position :        235 - 237
    "field value" is placed in position                 :        241     Specified by u2018field length indicatoru2019
    In addition I got the information, that even if there is no field value for a specific field name. That the field name and also the length of the field will be displayed in the RDI file.
    Now I generated an RDI file and I see that only these field (name, position, value) are displayed in RDI which have a value. Fields which contains no value are not displayed!
    In conclusion, my first question would be if its correct that field names and also the lengths are everys time displayed in RDI even if there is no value for it?
    If this is true,  the second question would be: Whatr could be the reason that the field names are not in the RDI file when there is no value for it.
    Thanks in advance for any helpful answers

    Dear experts,
    I have a question concerning the RDI file format.
    The specification of RDI file said the following about the structure of each RDI file
    "field name" is placed in position                 :        104     
    "field length" indicator is placed in position :        235 - 237
    "field value" is placed in position                 :        241     Specified by u2018field length indicatoru2019
    In addition I got the information, that even if there is no field value for a specific field name. That the field name and also the length of the field will be displayed in the RDI file.
    Now I generated an RDI file and I see that only these field (name, position, value) are displayed in RDI which have a value. Fields which contains no value are not displayed!
    In conclusion, my first question would be if its correct that field names and also the lengths are everys time displayed in RDI even if there is no value for it?
    If this is true,  the second question would be: Whatr could be the reason that the field names are not in the RDI file when there is no value for it.
    Thanks in advance for any helpful answers

Maybe you are looking for