FieTo IDoc Scenario.. Any option to filter the values without delimiter (-)

For File To IDoc scenario.
In Message Mapping:
Source value for a field will be in this format...
Source Field value:
234-890
345-789
322-099
But my requirement is to filter the hyphen from the values and map it to IDoc field like this..
Target field value:
234890
345789
322099
Can anyone clarify this ?
regards
Saravanan

Hi Saravanan,
try this code:
String deleteSth = "-";
String nothing = "";
String stringWithout = a.replaceAll(deleteSth,nothing);
return stringWithout;
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

Similar Messages

Any option to get the list of Invoice with respect to Sales Area

Dear All,
Is there any option to check the list of Invoices with respect to the Sales area.
Because, in VF05, we are getting the list either for a Payer or a Material.
I want to see the list of Invoices for a Sales area. I mean, it should be similar to VA05, where we can get the list of Sales Orders even without providing the Customer and Material information.
Reagrds,
Mullairaja

HI
Use the T code VF05N and select the option Bill documents in Fi
Here you can get the list of invoices
Try with MC+2
regards
Prashanth
Edited by: Prashanth@SD on Nov 11, 2010 9:44 AM

Do we have any option to count the no. of pernrs to be printed.

Hi ,
Do we have any option to count the no. of pernrs in an org. unit to be printed with subtotals in the pernrs column itself.
Do we have any option for counter in SLIS itself.
Thanks in advance,
Sarika.

you can use an ICM timeout - but then this will also affect long running queries if you set it too low.
icm timeout is a system parameter and not specific to your query alone.
Otherwise you can have a portal and setup DSM ( Distributed Session Management) to handle the same...
Sorry it was ICM timeout... and not ICF...
http://www.saptechies.com/icm-and-sap-web-dispatcher-timeout-parameter/&ei=PXnvSaaYDJOdlQeBqo3CBw&usg=AFQjCNGict0Qj7n2if1qcvr6M6S6D1R6mA
Edited by: Arun Varadarajan on Apr 23, 2009 1:38 AM

Option of 'Restore Last Session' not working. Is there any option to repair the 'Mozilla Firefox' without loosing History?

Option of 'Restore Last Session' not working. Is there any option to repair the 'Mozilla Firefox' without loosing History?

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

If we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3. kindly suggest

if we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3 . kindly suggest..!

Hello kumar kalptaru,
Thank you for participating in the Apple Support Communities.
It sounds like you're wondering how to hang up a call besides using the Sleep/Wake button.
Other than this, you can tap the red hang up button on the Phone app. See the iPhone User Guide for more help:
While on a call - iPhone
End a call. Tap or press the Sleep/Wake button.
Best Regards,
Jeremy

Any option to change the technical name of the info sources?

Hi,
Is there any option to change the technical name of the infor sources?

Hi,
You cannot change the technical name of infosource. You can go for Save as option and save it with different techincal name as required.
Regards
Akhan

Do we have any option to track the number of downloaded reports from the OBIEE dashboard or Analysis by the user using usage tracking.

Do we have any option to track the number of downloaded reports from the OBIEE dashboard or Analysis by the user using usage tracking.

I'll ask the question of our onsite Microsoft consulting guys, but it's my understanding that as enterprise admins, we have no controls over it. This is an outcome of putting the end-users in charge of their own destiny.
We can revoke a user's entitlement to Office365ProPlus in the portal and via scripts, but AFAIK only the user controls the allocation of their entitlement.
Revoking an assignment/allocation, when logged in as the user, doesn't require access to the assigned/allocated computer, but if the information about the assigned/allocated computers in the portal is vague or ambiguous, it's easy to revoke the "wrong" one.
There's not much here in this forum about the hosted/cloudy aspects, since this forum is mainly about the client-side bits (the client applications, setup and configuration of those) - so in here, I usually refer people off to the O365 community for the
portal and hosted stuff.
(we have MS onsite at the moment for a big planning piece, around O365 and also Win8.1 and VDI. I'm not usually this lucky to have those guys on tap ;)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How can I filter the Values for the dropdowns in webdynpro

I have given data source to table, but as there are some repetitive values in table of dropdowns, I want to filter the Values for the dropdowns in webdynpro.
How can I do this?

I have given datasource to table in properties of table.
I have 2 different dropdowns for different columns in the table.
if the size of the table is 20 I get all the values populated in the dropdowns.
In these values, there are some repetetive values which I dont want to appear.
I can display it by making loop and can select from the values.
the problem is how to set the new values to that drop down again using context?
eg
dropdowns have,
presales activity
presales activity
presales activity
presales activity
presales activity
I need to filter the variable element and put back it in dropdown.
Thanks and regards
Hanif Kukkalli

There is no option to use the laptop without requiring a password?

The machine contantly asks me for a password. There is no option to use the laptop without requiring a password, such a nuisance. Like everyone else I really do not like Windows 8 either. I'm returning this waste of money and going back to living with my 5 year old HP.
Moderator Note: Edited subject to match content.
Solved!
Go to Solution.

That finally did the trick, thank you very much Bugbatter.

Is there any way to handle the navigation without defining it in faces-conf

hi,
I am new to JSF and I got lots of information from this forum. My new query is given below,
Is there any way to handle the navigation without defining it in faces-config.xml file? That means i want to navigate to a destination page programatically from the java class rather than declaring it it faces-config.xml file.
Your help and suggestions are hightly appreciated...
Thanks and regards,
Sudheesh K S

JSF as defaault looks your *-config.xml files in your web.xml configuration or default faces-config.xml file. If do not use default look third party tools like seam or others....

Is there any way to put the values inthe system matrix which is non editabl

is there any way to put the values inthe system matrix which is non editable...
this Q is not that much priority since i had achieved the requirement other way round by having user defined matrix ... but if i get the way for this it will help my add on performance much better...

Hi Raj, I didnt get all the details but here some ideas how you can solve your issue:
Depending in the system form you are working you can always use a DBDataSource in order to manipulate the rows in a matrix. It's much better as using the objects of the matrix itself. In this case you can use:
oMatrix.FlushToDataSource()
oDBDsource.SetValue("U_Quan", pVal.Row, "101")
oMatrix.Clear()
oMatrix.LoadFromDataSource()
As you can see in SetValue i'm obtaining the Column, then the row number and then setting a NEW value for this cell.
Please consider if you can use DBDataSource instead of UserDataSource.
If the answer is yes then you can use the following:
oMatrix.FlushToDataSource()
'//Get the line you want
matrix.GetLineData(pval.row)
'//Call the Userdatasource assigned to that column
UserDataSource = UserDataSources.Item("ItmCode")
'//Set the new value
m_UserDS.ValueEx = "A02520"
oMatrix.LoadFromDataSource()
You can also use:
oMatrix.Columns.Item("ItemName").Cells.Item(l_rownum).Specific.String = "A02520"
In case you are not assigning the string in a combobox of course.
Good luck!
Felipe

I want to install apps from itunes to my ipod and manage them manually but there is only one option to do that replaces my apps on ipod with apps in my itunes library . Is there any way to install the apps without replacing them??

I want to install apps using itunes from my pc but there is only on option for doing that i.e. itunes replace the installed apps with apps on itunes. Is there any other way for doing that without replacing my apps ???

Ipod touch will sync with one computer at a time. If you sync to another then it will erase the current content and replace with content from the new computer.

Dynamically filter the values while navigating from Rep1 to Rept2(Answers)

Answers Report:
Users want to Navigate from Report1 to Report2 and they want to control the parameters while they are passsing to Report2 like by filtering the prompt Values.IS prompted works fine but users want to filter the report2 by answers prompt before navigating to report 2.
When i navigate from Report 1 to Report 2 its directly going to Report 2 by passing the parameters,but users want the Prompt before they go to report 2 to filter the selections.
Thanks in Advance.

Hi,
Apart from Page section of the Pivot table, we can use the Report Navigations.
1.First Create an answers request(Report 2) and in that create Column Filter Prompt(by involving all the required columns).Save the report.
2.Place the report in either one page of a shared dashboards(except My Dashboard) or in a new dashboard .If there are any other pages in the dashboard.Please go to the Page Options -> MyDashboard [Dashboard Properties] and Hide the Dashboard.
3.Go to the Report 1.Choose a coumn on which the User wants to drill down(or navigate from). Go to the Properties ->Column Format -> Value Interaction -> Navigate -> Browse -> Dashboards(Select the Dashboard Page in which you have placed the Report 2)
This can be a possible solution.
Regards..

Is there any way to read the Value mapping input values dynamically?

Hi all..
I have a scenario where i have used value mapping. now the issue is when the input is not having any corresponding output value in value mapping then i should get null as output. can anyone suggest how can this be achieved?..
Regards
Anu.

Hi,
Do you know if the value in not maintained/found in the value mapping then it returns the same value as a result at runtime.
So, simply if and else will help you to get your desired result..
SourceField ---> ValueMapping------>|
|----->equalS---IF---->Then -----> Map constant (null) ----> Target
SourceField------------------------>|
Else ---->map (SourceField ---> ValueMapping) --->Target.
Regards,
Sarvesh

Adobe LiveCycle Drop Down List which allows typing to filter the values in a Drop Down list

I have a drop down list in my form with contains a lot of different numbers, text, countries, cities and states, etc.
I would like the user to either have the option to only use the drop down list or they can type "Zapple" or any portion and have it populate the value.
Is there a setting or code which I can use which will do this?
Currently, if the user types the first letter or number it will take them to the beginning of the list (since I have them listed alphabetically/numerically), but I'd prefer they can type beyond the first character and pinpoint the option they're looking for.
Thank you for any help

The whole sample will need to be updated. As I said in the email it can be done but it will be complex. This particular sample requires an external xml file. You will need to pull this from data in the form.

FieTo IDoc Scenario.. Any option to filter the values without delimiter (-)

Similar Messages

Maybe you are looking for