File adapter modules : Access to file data before content conversion

I have a file sender channel for which content conversion in applied. The incoming file has data in comma separated values format.
e.g.
102366,Amol Joshi,DEPT1
107752,XYZ PQR,DEPT2
I want to access the the actual data in the file before content conversion takes place. Is it possible to access this data inside the adaper module? I tried creating an adapter module and put it before CallSAPAdapter,it still gets the XML after content conversion as the input data to the module.
Any pointers?

Hi Amol,
I dont know if it is the right approach.
But if u r not able to meet ur requirement u can do one work around.
Use Message Transformation Bean to convert it once again in to CSV (flat file structure) and then proceed with ur module.
There should be a better way than this.
Hope we could find a better solution in the forum.
Regards,
Sudharshan

Similar Messages

  • Adapter Module for Sender File Adapter to access a Flat file

    Hi,
    We have a scenario where the source is a flat file.I want to develop an Adapter Module to make a small change to every line in the Flat file.
    Now how do we read a flat file in the Adapter Module?Coz the flat file will be converted to XML file by the Standard Adapter Module of the File adapter.
    Please help me out with this.
    Thank you,
    Anu.

    Hi Anu,
    If you are not using Content Conversion option Standard Adapter Module does not convert the Flat file to XML .
    You can directly access the payload as it is in flat file in the Adapter Module and make changes.
    Use the Standard classes ModuleData & moduleContext to fetch the Payload.
    chk this :
    Customized Sender Adapter Module
    XI: Read data from PDF file in Sender Adapter
    regards
    Ganga

  • Dynamic configuration required in sender file - Adapter Module

    Hi Everybody,
    I am developing an Adapter Module in the file adapter (sender) using Adapter Specific Message Attributes.
    I am using Dynamic configuration inside the Module Process method in the adapter module.
    We are getting an error saying Dynamic Configuration cannot be resolved.
    Can anybody tell me the package to be used.
    Thanks,
    Zabiulla

    You can access the dynamic configuration in adapter module like this:
    Message msg = (Message) inputModuleData.getPrincipalData();
    String fileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File", "FileName");
    You do not need any addition library besides the adapter module API.
    Hope that helps
    Stefan

  • Adapter Module (Reading Excel File)

    Hi Guys,
    I followed the Webblog : Read Excel instead of XML through FileAdapter
    For File Adapter Module Development , for reading Excel Sheet.
    Deployment all went fine and when i used in my configuration , file is getting picked up but the xml content is not getting displyed , it says not well formated.Below error is shown in the CC Monitor
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    XML document must have a top level element. Error processing resource 'http://pxxxxx:50xxx/mdt/messagecontentservlet?att...
    My coding in nwds
              xmldata =   "<?xmlversion="1.0"encoding="UTF-8"?>
                             + "<ns:"+wb.getSheet(0).getCell(0, 0).getContents() +"xmlns:ns=""
                             + wb.getSheet(0).getCell(1, 0).getContents() + "">"
                             + "<Name>"+ wb.getSheet(0).getCell(1, 2).getContents()
                             + "</Name>" +"</ns:" wb.getSheet(0).getCell(0, 0).getContents()">";
    Kindly suggest if any
    srini
    Edited by: Venkateswarlu Srinivas on Jul 4, 2008 2:47 PM

    try removing the \n you have added in the string

  • Sender File Adapter picking the same file twice

    We are facing a weird issue with File Sender Adapter
    We are using PI File Adapter ( NFS ) to read files for a NFS folder and
    processing those in PI.Normally it works fine. But for a scenario we
    are noticing it sometimes process the same file twice before archiving,
    thus duplicating the financial postings.
    What we have is :
    File Sender Adapter - NFS, Polling interval 60 secs, and Processign
    mdoe Archive. File name includes Wildcards - JE_Upload*.txt
    what we are noticing is that :
    when it picks up a file, it immediately polls again to check for
    another file, and sometimes the file is not yet archived so it picks up
    and reprocess the same file.
    If you see the message below, both belong to the same file, and it
    picked up the same file again in 12 secs after processing it the first
    time
       Successful 02.11.2009 15:01:00 02.11.2009 15:01:01   APMANUAL     urn:bl:i2g:003:100
    SI_SKF_FIDOC_OB XI Message
       Successful 02.11.2009 15:00:49 02.11.2009 15:00:50   APMANUAL     urn:bl:i2g:003:100
    SI_SKF_FIDOC_OB XI Message
    Anyone seen this behavior before?

    Hi,
    Please check the script which creates file in source NFS Folders. There is possibility that script is making change in file when PI is picking up the file.
    When PI picks the file first time it creates one message ID in system. After that if script is making any change in file without file name change (This need not necessary data change), for PI it becomes new file and new message gets generated in PI for same file.
    This error normally comes when File adapter is not able to archive file succesfully. For eg. file with same name alredy exists in Archive folder.
    File adapter generates the new message id whenfile get modified(eg.change in its length or data change) even though
    the file name is same and when file get change ,XI file adapter thinks that its new file and hence generate the new message id for same file.
    If file has same name and notmodified then XI adapter will not generate new message id and will keep on throw the error till you remove that file with same name from the
    archieve directory.
    -Warm Regards,
    Gouri

  • File adapter picking up partial files

    Hi All,
    We are facing a wierd problem with the File Adapter.
    The problem is that, we are getting the xml files from the source system, and PI is supposed to pick them up and process them. Sometimes, the file adapter is picking up the empty files / partial files, i.e., before the file is completely written on to the FTP folder.
    We tried increasing the polling interval. But this did not help. Since we are taking the files from the FTP, the option "MSecs" in Additional Parameters also will not work. As we are on PI 7.0 SP13, we tried to search for the "Empty File Handling" option wherein we can make the file adapter skip the 0kb files. But we are not able to find that option anywhere.
    Please help us find a solution to this problem.
    Thanks,
    Hari.

    Hari,
    In sender communication channel click on  Advanced. Then you see the paramter Msecs to Wait Before Modification Check. Add a value 3000. Then you should be good.
    Regards,
    ---Satish

  • File adapter reading while the file is still being written....

    Hello BPEL Gurus,
    I had a quick question around BPEL or ESB file adapter. Does BPEL file adapter starts reading a huge file that is being written or it waits until the writing process is completed and file is complete?
    Any response is highly is appreciated.
    Thanks.
    SM

    It goes like this. At every polling frequency, the adapter looks into the directory for the files with specified pattern (e.g. *.csv, MYCOMPANY*.txt) and specified condition, e.g. minimum file age. This means if there will be 2 files available with matching criteria, the both will be picked up and processed simultaneously in two different BPEL instances. No specific order of execution. However you will find the instances in BPEL console with little delay based on file size.
    Perhaps you can elaborate your scenario further. Do we have knowledge of the file name that are to be picked up from the folder. You may use synchronous read option. If you are using 10.1.3.4 version then you can specify the file name before file adapter makes a synchronous read into the give directory.

  • NFS File adapter donu00B4t generate log file.

    Hello!
    We have a problem with a File adapter. when adapter catch file, this one don´t archive this file into archive directory.
    We have:
    Processing mode: Archive.
    Archive directory : /XIcom/INT181_GECAT/LOG
    This directory is created correctly.
    Someone can i help me. Thanks.
    Best regards.

    Hi ,
    >>>NFS File adapter don´t generate log file
    Do you mean you are not getting the processed files archived only when the file adapter set to NFS File system ?
    Did you try same thing by setting File adapter as FTP ?
    If you face same issue with File adpter set in FTP mode also then there is some issue with access to the folders.
    Please check this ...
    Regards,
    Nanda
    Message was edited by: Nanda kishore Reddy Narapu Reddy

  • File Adapter polls all the files from the directory when deployed again

    Hi,
    File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
    For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
    But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
    My guess is that it should not pick all the files but based on timestamp only.
    I guess I can observe the same behavior if I bounce the Application Server also
    Do I have an option to achieve this?
    Thanks,
    Sasi Bhushan.

    try this:
    1- create a File object for the directory. (look at isDirectory() )
    2- create a File[] that represents the files in that directory. (.listFiles())
    3- if (file[x].isDirectory()) {recursive method call;}
    4- else {
    process file;
    If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving.

  • Sender File adapter not picking the file ABCD.PRN extension file

    Hi
    Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
    My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
    I have configured the Sender File adapter with Message Protocol -  Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
    What are the parameters that I have to consider with the file extension .PRN using File adapter?
    Thanks.
    S.

    Hi Swarna,
    You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
    Regards,
    ---Satish

  • Sender File Adapter stop processing all files

    Hello all,
    the file adapter pick up all files in the directory by default.
    if  a large number of files are in the directory then this could slow down the pi processing.
    is there any way to process only one file per polling??
    regards

    >
    Ralf Zimmerningkat wrote:
    > Hello all,
    > the file adapter pick up all files in the directory by default.
    > if  a large number of files are in the directory then this could slow down the pi processing.
    > is there any way to process only one file per polling??
    >
    > regards
    I do not have any proble if you have got the answer. BUT this blog says how to exclude the other files from the same folder.
    Your Case: For example, Your Sender CC wants to pick up file ABC.txt from /xyz dir, now suppose there are 10 thousand files of same name in the dir and you want ABC.txt should be picked up one by one, So how this blog is going to help you. Can you Plz explain to me and others too?
    @Sachin may be you can throw some light on this... may be I am missing something.

  • File Adapter Not picking the files

    Hi All,
    We have a process wherein the file adapter picks up the file from a particular location and it processed thereafter. We get the files once every month. We noticed that if the files that are being dazzled are of the same, i.e if the same nomenclature is there for the file that was dazzled the previous month, the adapter does not pick up the file. Only after renaming the file, it picks the file and processed them.
    Any idea why the files that are dazzled with the same name are not being picked up.
    Thanks in Advance...!!

    Hi,
    While configuring file adapter to pick up the files cross verify with file name putting in the directory location against the
    "Includes files with name pattern" "Excludes file with name pattern" file name..
    let say if u kept .*txt if picks the files txt with any name and one more think once after picking up the file from particular location are u enabling (delete file once read) option in configuration(It all depends on ur req)..
    cross check the schema element of the file pattern.

  • File Adapter to read Zip file and send it as input to another webservice

    Hi,
    I have the below requirement:
    1. A service will generate 3 attachments and place it in a particular directory.
    2. SOA service has to pick those 3 files and send those files as input to another custom application which will email.
    Design :
    1. First SOA will create an archive file of those 3 attachements and then file adapter will poll for that zip file in that location and send that file as a whole to the custom application.
    Query:
    Now my question, is the above design feasible? If so, how to configure the file adapter to pass the file as input to that custom application?
    Kindly do the needful
    Thanks,
    Priya

    You can accomplish this via java embedding activity...Create a java embedding, which will create a zip file.. this java code is easy to implement..
    You can also do away with un-necessary polling file adapter.. and you can use "Synchronous File Read" operation of File Adapter.. For Sync Read, you'll have to pass the zip file name, which you can easily fetch from java embedding activity..
    Let me know, if this doesn't work.

  • File Adapter is not polling File.

    Hi All,
    I am using file adapter to poll a file. When I am restarting server then it is picking file. After then when I am dropping a file then File Adapter is not picking File.
    Can any one guide me what si problem?
    I am using SOA SUITE 10.1.3.4
    Thanks in Advance.

    First clusterGroupId is a unique value. Do not use the same clusterGroupId across different adapters even in different process.
    Once clusterGroupId is defined, the multiple activations of the same adapter Activation Agent is to be detected implicitly and automatically by all the instances of the adapter framework active in that cluster. The cluster will allow onlye one node activation to start the reading the files/messages. The adapter framework instances chooses one among multiple nodes, randomly to assume the Primary Activation responsibility. The other activations (instances) in the cluster will initiate to a hot stand-by state, without actually invoking EndpointActivation on the JCA resource adapter.
    If a primary activation at some point becomes unresponsive, is deactivated manually or if it crashes/exits, then any one of the remaining adapter framework members of the cluster group will immediately detect this, and reassign the primary activation responsibility to one of activation agents standing by.
    This feature uses JGroups underneath for the implementation, hence the clusterGroupId property. These features require cluster and JGroups configuration in collaxa-config.xml and jgroups-protocol.xml. All BPEL instances participating in the cluster must share the same cluster name in collaxa-config.xml,and the same multicast address and port in jgroups-protocol.xml.
    As far as for this issue, I too face the same across diff environments and searching for the exact reason. I believe this happens when primary activation agent crashes, the hand-over to the other node is not happening properly through jgroups.
    Nirav

  • Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

    can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

    See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

Maybe you are looking for