File adapter. Only get new files

Hi there,
I have a small problem that I'm not able to solve that easily with XI.
I have some directories that I need to get files from on a remote server. The only problem is i need to get only the new files and I am not allowed to delete the old files. Since we are not the only one getting those files.
So far I have not found any option to keep the old files and only get the new ones. Does anybody know a neat trick to get only the new ones?
Regards,
Wietse

> Hi again Wietse,
> After configuring the file adapter the way i
> mentioned,check for performance, you might need to
> install remote Adapter engine if you have some FW
> problems or other security barriers that turn the
> processing of this file to a hassel over the net.
>
> Nimrod
Problem still is I am not allowed to do anything else then ftp/get on the files. I can't install a remote adapter engine or change anything to the files.
I hoped that it would be possible to store the filenames somewhere and compare a dir listing to the stored filenames before the real get is done. But even when writing an adapter module, the file will already be in the adapter once the module kicks in. And I don't want to get old files that I've already processed into my system since there is a huge history of files on the machine.
I think I might end up writing a perl script that searches for the new files and gets them and them sends them through to XI using a SOAP call.

Similar Messages

I have a ipod classic 5th gerneration. Is there any way I can get a new battery for it? Or does Apple only get new batteries for the 7th generations? Thanks

I have a ipod classic 5th gerneration. Is there any way I can get a new battery for it? Or does Apple only get new batteries for the 7th generations? Thanks

Yes you can still purchase replacement batteries your iPod from third party repair companies. Apple does not offer replacement parts.
Do a Google search for iPod battery replacement and you should get a plethora of results. There are many good deals on Amazon and eBay.
B-rock

I am able to 'create a new version from original' but when I try to export the original, I only get a .jpg with the XMP file. The original is obviously there but why can't I access it please?

In Aperture 3 when I right click on an image I am able to 'create new version from original' which suggests that the original is there. When I try to export the original I only get a .jpg with the XMP file. These particular images are from 2010, has the RAW file become disconnected somehow? Please, how do I get access to the RAW file for editing in Ps? Thank you. Thomasrevil.

Sorry leonie, 'Use RAW as Original' is not an option for the image shot with the Canon.
Then your Import settings must have been different, when you imported the Canon photos.
You can check, if there is still a hidden raw file somewhere. If the image has been imported as a pair, you should see the "J" badge in Browser and Viewer, if you enable badge overlays. This indicates a pair, with the jpeg as original.
Select one of those images, and then relocate the original files "File > Relocate original" to a folder, where you can inspect it. Use "File > Show in Finder" after ward. Look, don't touch .
Then put it back, using "File > Consolidate".
Do you see your raw files in the folder, or is only a jpeg there?

OSB error while generating business service for FTP adapter Sync Get File

Hi All
I am trying to generate a business service from SOA Suite JCA FTP adapter Sync Get File, but i am getting this exception for no reasons (Rest operations list file, get file and put file are working)
Invalid JCA transport endpoint configuration, exception: java.lang.NullPointerException     Unknown ALSB Conflict.
Is this a bug in eclipse, can any body help me. Thanks
Sorry Forgot to mention eclipse version...
Eclipse Platform
Version: 3.6.2
Build id: M20110210-1200

Ok,
bcoz of this issue, i had to code the entire interface in OSB console. It runs fine in OSB console (i was able to test it successfully).
Is this a bug in eclipse or only i am facing this issue? Has anybody tried to create a business service from JCA FTP Get Synchronous jca file?
<adapter-config name="FTPReadMOMFileOnRMSDB" adapter="FTP Adapter"
     wsdlLocation="../wsdl/FTPReadMOMFileOnRMSDB.wsdl"
     xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
     <connection-factory location="eis/ftp/RMSDBFtpAdapter" />
     <endpoint-interaction portType="SynchRead_ptt"
          operation="SynchRead">
          <interaction-spec
               className="oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec">
               <property name="DeleteFile" value="true" />
               <property name="PhysicalDirectory" value="/MOMFiles/output" />
               <property name="FileName" value="*" />
               <property name="FileType" value="binary" />
          </interaction-spec>
     </endpoint-interaction>
</adapter-config>
One more doubt? The PhysicalArchiveDirectory path can be on the FTP server something like: /MOMFiles/archive. Or do i have to use the Put operation to move it to /MOMFiles/archive directory. Currently OSB console and eclipse do not accept FTP path for this parameter and want me to specify a local directory on server. Thanks

I want rsync only download new files and keep old files

I install Arch i686 in home and in home I do not have internet connection , so at work I download all packages I need with this command
rsync -avrt --bwlimit=58 rsync://mirror.datacenter.by/arch//extra/os/any/ /home/ddd/i686/
and move them to home and then copy them to
/var/cache/pacman/arch
and install packages with pacman
after two days , I run this command
rsync -avrt --bwlimit=58 rsync://mirror.datacenter.by/arch//extra/os/any/ /home/ddd/i686/
and I see rsync get last packages again and use many Bandwidth
how I tell rsync only download new files and keep old files

rsync manpage says the following:
-u, --update skip files that are newer on the receiver
--inplace update destination files in-place
--append append data onto shorter files
--append-verify --append w/old data in file checksum
I guess you need to add -u flag.
Reading manpages is the highest virtue in GNU/Linux.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8% before this happens any idea how to fix I have a movie deadline to meet!

Hi all,
Finished editing a short movie.
Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
thanks
Louis B

Thanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
Just to clarify points for people out there with the same issue:
First steps
- Ensure background rendering is turned off in preferences
- Delete project and events render files
- If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
Next Steps
I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
Then we tried export again this time to a master file with some settings detailed by Apple.
The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
best wishes,
Louis B

I have tranferred journal from iPhoto to iTunes but only get files cannot get the journal to open up

I have followed the steps to transfer journals from iphoto toitunes but cannot open up the file. Only get individual jpegs How can I see the Journal as it appears on the ipad on my computer?

Yes, sharing to iTunes will only transfer the photos, not the journal.
If you want to view the pages, publish your journal on the web and view it with your web browser. Then you can save it as a web archive.
See the iPhoto help on how to publish the journal on the web - you will need to enable iCloud to be able to do this.
Publish a new journal with iCloud
http://help.apple.com/iphoto/ipad/1.1/#blnkaf3ef70a
I am not sure, if you can publish Journals to iCloud using IOS 5 - just see, if it is available. Some iCloud features will not work with IOS 5 (http://support.apple.com/kb/ht4759)
Regards
Léonie

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?

Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

For such situation, I'd suggest the following:
1. Remove current installed office with the fix-it tool in
KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
2. Either download a trial version of Office 2013 from
http://office.microsoft.com/, or from
http://technet.microsoft.com/en-us/evalcenter/jj937170
3. Reboot your computer in clean boot mode, and run setup again
Max Meng
TechNet Community Support

Upgrade from Windows 7 pro to windows 8.1 pro I only get keep personal files only or nothing, I want to keep apps too

when trying to upgrade from windows 7 SP1 to 8.1 pro from the DVD while being in windows I only get an option to keep personal files only or keep nothing.
what do I have to do so I can do a upgrade and keep all the programs too ?
thanks!
Brandon Dillon

I think there might be a way that when you install win 8.1 on a system with existing windows it will copy the user profile to a spare partition and then format the C and the then install windows 8
If you do a rebuild on a Win 7 or Win 8 PC from a recovery partition, the software as standard now on the rebuild gives you the options of keeping your Data, even though it will wipe and reinstall everything as per factory settings.
So this is normal and to be expected.
To be honest I wouldn't even do this... I'd backup everything, install Win 8.1 from complete scratch, not keeping any data and then restore data as I needed it. I am apprehensive about it thinking it knows where all my data might be.... especially with how
some programs like to store stuff.
Of course this means everything to install again, but latest versions always good, a clean install

In my SOA Composite, Can I use file/FTP adapter to get the EDI X12 850

Our requirement is to build a SOA Composite to dump all the details in a EDI X12 850 ( Purchase order ) document in to a database table. In my SOA Composite, Can I use file/FTP adapter to get the EDI X12 850 element details to map them to a base base columns.

Drop the File Adapter to the left lane of the composite i.e., Services lane...
Go to Step 2, give a meaningful name....
Step 3, select "define from operation and schema"
Step 4, select the operation type as "read"
Step 5, select physical path and give the folder path in the "Directory for incoming files" field.,
Step 6, select wildcards and give the expression depending on the file name it would be at run time...
Step 7, select the polling frequency as required....
Step 8, in the URL field, adjacent to that , select "browse for schema file" and select the XSD which you have exported from B2B Editor.
say next and finish, you will be good to go.
Hope this helps,
Thanks,
N

When trying to convert a pdf file into a word doc, i only get the graphics but not the text. How do i remedy this?

When trying to convert a pdf file into a word doc I only get graphics but no text. What to do?

Hey hamsa142,
I think you are converting a scanned PDF to word.
You might need to run OCR first to make the text recognizable and then convert it to word.
Regards,
Anubha

How can I view a PDF file on my IPad? I only get the first page.

How can I view a PDF file from my Ipad, both in email and Internet links? I only get the first page.

Support for viewing PDFs in emails and web-pages is built in to the iPad. You need not have bought an app for that.
There are PDF apps that provide more features than the built-in functionality, but for basic viewing of multi-page PDFs no app is required.

I downloaded a .mov file but when I play it I only get stills. How do I run it as a video?

I downloaded a .mov video file from Vimeo and when I try to play it I only get stills, not the video. How do I get Quick Time to play this as a video? Also, if I try to delete the file I cannot do so. It will not move it to the recycle bin. It also won't allow me to change the properties to another type of file for viewing. I can't get rid of it or watch it. Any ideas?

hi
download perian from internet, it'll solve your issue.

File adapter. Only get new files

Similar Messages

Maybe you are looking for