File Adapter OS Command Line After processing (UNIX)

Hi guys,
I want to run only one line after message processing:
compress -f %f
It must be compress seeing as this is the way we use it on our legacy system where it adds the extension .Z.
It seems crazy to write a shell script for only one line. Is there any way to run this line without using a shell script and if so should I run it in some additional characters?
Also if this isn't possible, please show me an example of how the shell script would look like, and where on the XI server this shell script should be saved.
Thanks a million!
Anneke

Hi Anneke,
Check this blog by Sameer
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
Should help u out

Similar Messages

File adapter OS command line - Calling a command remotely ??

Hi,
We have a scenario where in which receiver file adapter after putting a file on the FTP , a subsequent XML loader needs to be called which would load data into the client legacy ERP system.
There seems to be some idea about doing it through file adapter OS command line.
The problem is the how to call this loader command remotely from our file adapter OS command line.
Any help would be appreciated ???

>> The problem is the how to call this loader command remotely from our file adapter OS command line.
The below link might be helpful ...
http://wiki.sdn.sap.com/wiki/display/XI/SAPXIFileAdapterOSCommandLine+Feature

File adapter: End of line issue in unix receiver

Hi all,
We are sending flat files using File Adapter (FTP) with the File content conversion functionality and we can see the file right in our windows system, but when it arrives to the Unix receiver, they give us an error regarding the End of line.
It has a ^M character in every line so it cannot be processed.
Does anyone know how to skip this end of line character in our file keeping the same format?
Thanks in advance.

Hi Daniel,
you can try to use this adapter module:
localejbs/SAP XI Sample/ConvertCRLFfromToLF
http://help.sap.com/saphelp_nw04/helpdata/en/32/43d84072378031e10000000a1550b0/content.htm
Hope this help.
Francesco

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

Hello j. smith,
TestStand gives you the ability to create "sequence files" which are lists of tests to be run sequentially or in parallel. These tests can be written in any language: LabVIEW VIs, C/C++ DLLs, EXEs, ActiveX objects, .NET Assemblies, etc.
You can run your TestStand sequence files from a command-line prompt using the following syntax:
\bin\SeqEdit.exe" /quit -run
This will launch the TestStand Sequence Editor (and optionally prompt you for TestStand login information if you have this configured), run your sequence file, then exit.
If you're using the TestStand process model, it can output your results to a report file or database if you configure this. To use a TestStand process mo
del to execute your sequence file, use the following syntax:
\bin\SeqEdit.exe" /quit -runEntryPoint
Here's an example:
C:\>"C:\Program Files\National Instruments\TestStand 3.0\bin\SeqEdit.exe" /quit -runEntryPoint "Single Pass" "C:\Program Files\National Instruments\TestStand 3.0\Examples\Demo\C\computer.seq"
Note that multiple sequences and sequence files can be specified on the command line.
TestStand supports remote sequence execution using DCOM (Distributed COM), which is an east way to remotely execute tests. But as for running tests or commands through a telnet or serial interface, you would have need to check Windows documentation on how to execute command-line remotely like this.
David Mc.
NI Applications Engineer

Running jar files from the command line

I have always felt it would be useful to run a jar file from th command line in EXACTLY the same way as an EXE. On some systems, typing MYAPP.JAR will run the app, but doesn't output and command line data, so it only works for GUI apps. I've come up with a tiny C program that runs java -jar xxxx.jar for you.
#include <stdio.h>
#include <string.h>
#include <process.h>
void main(int argc,char *argv[])
     char cmd[1024];
     strcpy(cmd,"java -jar ");
     strcat(cmd,argv[0]);
     strcat(cmd,".jar");
     for(int arg=1;arg<argc;arg++)
          strcat(cmd," ");
          strcat(cmd,argv[arg]);
     system(cmd);
}Simply compile this to an exe, rename the exe to the name of your jar file and put it in the same directory. Then just type 'MyJarFile' (no jar extension) and it should run. It passes all command live args as well. Comments ?

Here's a better version. The JAR and the EXE can be anywhere in the PATH:
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <process.h>
void main(int argc,char *argv[])
     char jar[1024];
     char cmd[1024];
     strcpy(cmd,argv[0]);
     strcat(cmd,".jar");
     _searchenv(cmd,"PATH",jar);
     strcpy(cmd,"java -jar ");
     strcat(cmd,jar);
     for(int arg=1;arg<argc;arg++)
          strcat(cmd," ");
          strcat(cmd,argv[arg]);
     system(cmd);
}

Unable to clone File Adapter receiver channel for parallel processing

Hi Experts,
I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
Can anybody provide me suggestions to solve this error.
Note : without variable substitution , the interface is working good.
Is it due to, i am trying the source structure field in response file adapter?

Hi,
In your CC, do you use some additional paramaters ?
like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
Mickael

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

If I understand correctly, you want to do the following:
1. Create one or more tab-delimited files that specify a series of query strings (that LabVIEW will send to your products) and expected reply strings (that LabVIEW will look for in response to each query)
2. Run your LabVIEW program (the test engine) and have it execute one or more test scripts from file using either TCP/IP or serial communication to your units under test
3. Track how many of the queries are met with the expected response, and output an indication of whether each step passed or failed
If this is close to correct, then I've attached a sample test file and LabVIEW VI as an example; I chose the TCP/telnet method because it allowed me to use the ni.com Web site to simulate my tes
t hardware. If you happen to own the LabVIEW Internet Toolkit, there's a VI called "Telnet Play Script" in the Telnet palette that does something fairly similar using TCP. The same general model would also work for Serial communications.
Hope it helps,
John Lum
Attachments:
test_engine.zip ‏24 KB

Compress/zip files from the command line in Windows 7?

In Windows 7 is there a native way to compress or zip files from the command line? I'd like to do it without installing any third-party utilities such as 7Zip.

I fully agree that Compact is not the answer. There are additional concerns with the Compact command. It enables disk compression which is a total no-no. Very bad! It makes your computer very slow and is quite difficult to undo. The only time anyone should
use this command is when they're removing disk compression because someone turned it on to save space. Turning this off has to be done by booting into the recovery console, if my memory serves me correctly, and it's a real nuisance. So
definitely no to the Compact command.
If you wanted to compress files before sending them to another drive, or over a network, or by email, then Compact wouldn't actually help at all because the files have to get uncompressed whenever they're accessed, especially before sending them anywhere.
When I say accessed, I mean that just looking at a file triggers the OS to decompress it in the background and present you with an uncompressed version of it then letting you change it and recompressing it again for storage every single time you access the
file, which is why your machine gets slower. If you have folders or files that have blue text instead of black, then you've probably already made this mistake.
I would also like to know if there is a built-in command for zipping files/directories, or, if there isn't such a thing built into Windows, then I would like to know if this is feature is accessible through Visual Studio, which would be just as good as having
a command-line program for those of us that do a bit of programming.
If anyone knows if MS provides such a feature, either by command-line or through an API, then I'd love to hear about it. Good luck to those of you that have disk compression turn on.

Can I use the Command Line Interface on Unix?

Hi,
We use 9iAS on Unix. We want to use Discoverer Command Line Interface on unix to export the worksheet query result. Can anyone know how to do this? I couldn't find out the command similar to dis5usr.exe for windows version.
Thanks.
Richard Qiu

Hello Richard
You can use the Discoverer EUL Command Line for Java utility. This was released with Discoverer 10g (9.0.4).
Please refer to the documentation for more information on how to use this command line interface: 'Oracle Discoverer EUL Command Line for Java User's Guide 10g (9.0.4), Part No. B10274_01 (PDF)' The document is available from OTN at http://otn.oracle.com/documentation/discoverer.html
Regards
Discoverer Product Management

Setting IIS W3C Extended Log File settings via command line, registry or configuration file

I am currently in need of a way to set IIS W3C Extended Log File settings via command line, registry or configuration file. More specifically the 'Bytes Sent (sc-bytes)' and 'Bytes Received (cs-bytes)' settings that are not enabled by default.
If anyone knows where I can locate these setting (outside of the GUI) for all IIS versions that would be greatly appreciated.

I believe I have found a valid solution. You must have the WebAdministration module loaded. I hope this helps someone.
Use the following syntax to view current W3C fields:
Get-WebConfiguration -filter system.applicationhost/sites/sitedefaults/logfile | select-object -expandProperty logExtFileFlags
Use the following syntax to set W3C fields:
Set-WebConfigurationProperty -Filter System.Applicationhost/Sites/SiteDefaults/logfile -Name LogExtFileFlags -Value "Date,Time,ClientIP,UserName,SiteName,ComputerName,ServerIP,Method,UriStem,UriQuery,HttpStatus,Win32Status,BytesSent,BytesRecv,TimeTaken,ServerPort,UserAgent,Cookie,Referer,ProtocolVersion,Host,HttpSubStatus"}

How to load the boot menu using the command line , after the configuration change ?

how to load the boot menu using the command line , after the configuration change ?

Hi @Bask-48
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are trying to change the boot order. Here is a link to Configuring the Boot Order in the System BIOS
that will assist you.
Good Luck and Happy Holidays!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Adobe Reader XI does not open files with a command line "path" argument.

Adobe Reader XI does not open files with a command line "path" argument. Version X and lower all worked fine. I have deleted and reinstalled the program with no success. Is this a bug?

Hi Daniel,
What is the make of the printer and is it using PCL or PS driver.?
Do you have Acrobat installed on this machine as well?
Please check if 'Print Spooler' service is running on the machine.
Regards,
Rave

Creating .swf from .fla file using ADT command line

Dear Adobe Community and Moderators:
Is it possible to use the ADT command line to directly compile an .fla file into an .swf file? Context: I have an app created in Flash Pro CS55 (6 months worth of work), but now found Adobe has dropped Flash Pro in favor of Flash Builder or Flex. I have some native extensions I want to use for iOS, but they require Air 3.1 to compile (swf-version=14) i.e. using the MessageUI framework in a static .a library for an Air app. Flash Pro CS55's top end limit seems to be swf-version=13 (Flash 11). Because of heavy investment in time and energy into our Air app in Flash Pro, it's not feasible to convert to Flex by end of week. I tried creating an .swc file, and taking the library.swf from that, but alas, a catch-22, Flash Pro CS55 only compiles to swf-version=13.
Is there any way to either (a) directly compile my root .swf file (from the .fla file) using a command line (so I can use ADT from Air 3.1 SDK) or (b) some way I can marry a native extension I've found I can use on GitHub which is swf-version=14? Again, my issue is that I have to use Air 3.1 since only it supports iOS5.
Any thoughts, suggestions, comments are highly appreciated (including if it's not possible to do what I'm trying to do).
Thank you Adobe community in advance,
Alex

I have the exact same question, please respond if you hold the answer to this! mxmlc won't work for me since I have created too many assets within the fla already! Thanks!

Photoshop Elements 7 Command Line Batch Processing?

I program in C# or VB .NET using Visual Studio 2008.
Q. Can I program or write Photoshop command line batch processing scripts?
I need to take several hundred photos and convert them as follows:
1. Import .jpg
2. Resize image
3. Convert to layer
4. Drop-shadow & resize canvas
5. Rotate-arbitraty (variable 3 deg cw - 3 deg ccw)
6. Save for use in web as .gif (transparent background)

You might be better asking in the SDK forum or Elements forum.
But if it was me I would use JavaScript where all you have listed is possible.

File name as command line option for multiple VM processes

"-Xloggc:/tmp/gc.log" is the option I'd like to set, but every process will log to that file and even if we don't experience any concurrency issues the data still isn't useful because I can't tell which process did what.
The island files are cleverly named to include their process number, can I do similar for command line options or will I be restricted to a single JVM?

Online help (as of LabVIEW 7.0?), Index, Command Line, User-defined arguments - It will show you the following:
You also can pass LabVIEW-defined or user-defined arguments when you launch LabVIEW from the command line. To pass user-defined arguments in the command line, enter two hyphens (--) surrounded by spaces before the set of user-defined arguments. LabVIEW does not use any arguments after the two hyphens to launch labview.exe. LabVIEW passes the arguments after the two hyphens to the block diagram of the VI you launch. Use the Application:Command Line Arguments property to read the user-defined command-line arguments passed when LabVIEW launches.
For example, to launch mycool.vi and pass user-defined arguments, use the following command:
c:\labview\la
bview.exe c:\coolapp\mycool.vi -- 1000 sine
On the block diagram of the mycool.vi, use the Application:Command Line Arguments property to read the 1000 and sine arguments you passed and handle the values.
Enjoy,
Roy

File Adapter OS Command Line After processing (UNIX)

Similar Messages

Maybe you are looking for