File adapter polling location changing in between the process

Hi,
One more scenario, Say File adapter is polling for files in C:\. In between the process, the polling location needs to be changed to D:\. How to do this. Please help.
~rps

wont happen

Similar Messages

File Adapter polls all the files from the directory when deployed again

Hi,
File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
My guess is that it should not pick all the files but based on timestamp only.
I guess I can observe the same behavior if I bounce the Application Server also
Do I have an option to achieve this?
Thanks,
Sasi Bhushan.

try this:
1- create a File object for the directory. (look at isDirectory() )
2- create a File[] that represents the files in that directory. (.listFiles())
3- if (file[x].isDirectory()) {recursive method call;}
4- else {
process file;
If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving.

Weird problem in File Adapter polling

Hi Guys,
My BPEL process is working fine not until today wherein the File Adapter cannot poll for new files in the target directory. I tried restarting the bpel server and still my bpel process was not able to poll for new files. I tried creating a test bpel process and configure the file adapter (see below):
Operation Type: Read
Archive processed files: Enable
Delete files after successfule: Enable
Include files with pattern: *.csv
Publish messages in batches of: 1000
Polling frequency: 5 seconds
Minimum file age: 0 seconds
Sample File: test.csv
12345,12345,12345
When I tried testing it, the file was deleted but it was not able to archive the file and bpel process did not appear in the instance tab of BPEL console. I have check the domain.log and orabpel.log files and it didn't show any exceptions or error (log level is set to error)
Any idea how to fix this problem?
FYI, I'm using the version 10.1.3.1.
thanks,

What does your process do other than poll files, does it call any other adapter / service. This is more likely the issue although I have seen issues with the file and ftp adapter in 10.1.3.3 and 10.1.3.1. I never sorted the issue it just seemed to affect that process.
10.1.3.1 is really out of date and has a number of issues you should look at upgrading to 10.1.3.4 or 10.1.3.5 but I have seen some posts that have issues with 10.1.3.5.
cheers
James

HT2470 allow user full rights ie save files in any location, change file attributes etc - how, where?

how and where do I give my user full rights ie to save files in any location, change file attributed(from read only ) etc

The simplest way is with the chmod Terminal command.
Warning: unless you know exactly what you are doing, you are almost certain to break something with indiscriminate use of this command. Make sure at least your data files are backed up (& ideally in offline storage) before you experiment with this command, & note that you can mess things up enough that you will have to reinstall the OS to recover.

APP-PAY-06841: Person change exit between the old and the new date.

Hi,
Please help me by answering this question as very urgent basis.
ABC employee Effective date should be of future dated 10-jan-2011.
But ABC employee joining date has been entered on 10-Aug-2010.
amd also this date is also ended by updating on 10-Dec-2010.
But these records are wrong.This employee's effective date should be form 01-Jan-2011.
how to datetrack.
if iam changing the date bye keeping effective date as 10-Dec-2010 an an iam changing the record to 01-jan-2011,its throwing the error as "**APP-PAY-06841: Person change exit between the old and the new date**"
Thanks&Regards,
Sowmya.K

What is the application release?
Please see these docs.
Error: APP-PAY-06841: Person changes exist between the old date and the new date [ID 399056.1]
APP-PAY-06841 When Changing Latest Start Date Of An Employee Who Was An Ex-Contingent Worker [ID 1146414.1]
Unable To Change Start Date for Employee, Get Error "APP-PAY-06841: Person Changes Exist Between The Old Date And The New Date" [ID 603233.1]
Correcting Latest Start Date in People Screen Gives Error APP-PAY-06841 [ID 368289.1]
How To Change the Latest Start Date of an Employee? [ID 329692.1]
Thanks,
Hussein

How do I fix this error: DF024: Unable to preserve original file at ... Error 32 The process cannot access the file because it is being used by another process.(Seq 1352). ?

I am installing creative the cloud Illustrator desktop app on a machine with windows 7 64 bit running in a domain environment. The download starts and takes about runs for a bout 10 minutes and then stops with the error: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1352)
I am logged in as a network administrator and there are no other apps except a web browser (Chrome) running. There are no other users logged into the machine.
How can I see what other process is using the needed file so that I can fix it?
Thanks

MelissaB34 it looks like you already are reviewing your installation log files but you can find more information at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. From the error you have posted it appears that your current User account is either unable to update C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll or does not have sufficient file permissions to do so. Since you mentioned you are on a domain please ensure that you are working with your I.T. department and have correct access to this directory.
You may want to also consider logging in under a local administrator account to see if you face the same difficulties. This would help you determine if you are facing a file corruption issue or file permission issue.

HT1212 i have lost my password and been trying to restore but don't understand way it never get completed(my ipad3 gets on between the process and itunes reminds me that the device is passcode protected so it can't be connected and then the download also

after attempting many worng passwords my ipad atlast ask me to connect to the itunes and there is't any other option it is showing on it , and don't have the backup of my ipad on my pc so search the net and got the answer to restore it ......
i have lost my password and been trying to restore but don't understand way it never get completed(my ipad3 gets on between the process and itunes reminds me that the device is passcode protected so it can't be connected and then the download also stops) some times at 500mb and even at 700mb
please if some one know the sloution
help me
thanks
its ipad 3

Follow these instructions to resolve a forgotten passcode:
http://support.apple.com/kb/HT1212

File adapter polls before the processing is finished in R3

Hi,
Polling in sender file adapter is set as 4 secs. The problem arises when more than one files with same Service Order number are uploaded and the corresponding IDOCs are simultaneously received in R3 system. As one IDOC is already processing the Service Order, the other IDOC fails as the Service Order is already being processed.
Kindly suggest if there is a way to resolve this issue.
Regards
Pravesh

Hi,
Check below link:
File adapter should pick a single file at a time
can file adapter pick files sequentially
Amol
Edited by: AMOL BHARTI on Apr 14, 2010 11:38 AM

File adapter polling and getting the file name 11g Jdeveloper

I am using JDeveloper 11g. My process is something like;
A file adapter reads a XML file
This triggers the BPM process, file content is sent to start activity as message
I have to get the file name that is read by file adapter.
How to do that? Any help is appreciated.
I have seen couple of answers like bellow in forum but did not help me much
This is a very simple task in JDeveloper 11g, file adapters are linked to the receive activity, here there is a tab called Properties which you can use to extract the file name. Please follow the steps below:
1. Create a Simple Type variable of string type, call it fileName_var or any name you wish.
2. Open the Receive activity in your bpel project.
3. Scroll down to jca.file.FileName and double click on the value column, click on the browse button (...), select Variable, then click the search icon
4. Locate your recently created variable
5. Now when your project runs it will assign the file name to this variable, you can use this same approach also to pull the directory, file size, etc.
*************************/

hi,
Like you said.. steps are simple and clearly mentioned in guide.
1. create a variable of type string
2. after configuring the file adapter , go to corresponding receive activity , go to properties tab
3. search for a property with name as jca.file.FileName . This basically keeps track of file name
4. for this property, give the value as name of variable created in step 1 above
5. Use this variable anywhere in assign / transform
HTH,
Ketan

File adapter polling and getting the file name

I have a requirement where I have to poll a file and dump the data into the DB. But while polling a file for a particular file name, I also need to get the name of the file to do some operations on the file. The file name should be passed from the adapter in order to do some operations based on the file name. Is it possible to get the file name by any chance?

Hi,
its easy to get the file name..by creating the variable for the fileAdapterInboundHeader.wsdl
just follow the below link.
http://abhishek-soablog.blogspot.com/2008/06/bpel-getting-file-name-from-file.html
Edited by: Oraacler on Mar 19, 2010 2:59 AM

File adapter polling stops after reboot of third party system

Hi,
We noticed that whenever we reboot our third party system, XI File Adapter is losing it's connection to that third party system and polling stops. As a result File Adapter is not processing any files from that particular server.
To fix this problem, we either reboot XI Server or refresh communication channel (Go to change mode and save it).
File adapter is configured to use FTP to transfer the files between Windows Server and Unix Server.
Is there a better way to fix this problem?
Thanks in advance.
Regards
Chandu

Hi,
Make the connect mode as PER FILE TRANSFER in the file adapter.
<i>Connect Mode
Permanently
An existing connection to the FTP server is used permanently.
The connection is reestablished automatically if it is closed by the server.
Per File Transfer
A new connection to the FTP server is established for each file transfer.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Bhavesh

Problem with file adapter polling on Unix

Hi everybody,
I'm trying to run my BPEL process with receive activity of File adapter partner link. Everything is working OK on Windows file system - folder polling is set correctly and when the new file appears and is at least 2 minutes old, the process starts. But when I try to run the process on the UX server with BPEL (folders are changed to the correct values as '/home/myfolder', rights for this folder are set to RWX for everybody and process is deployed successfully to the appropriate domain) nothing is done when the new file appears in the folder.
I really don't know, where is the problem. Any hint from you?
Thanks,
Milan K.

Hi Suraj,
From The Note ``
"lock" option:- This is the option that is almost similar to the above; The key difference being in very rare circumstances, the first option may still allow channels to be run on both server nodes. When this option is set, file adapter acquires a enqueue service lock. Lock is taken on channel object and it is exclusive and non-cumulative such that no second message(even it is from the same channel) can fetch the files from configured FTP/File directories unless and until first message has completed(success/fail) its processing.
This is exactly my requirement.
but when I see the end time of the message its they are withing second only as
14:02:38     14:02:39
14:02:48     14:02:48
14:02:58     14:02:58
14:03:08     14:03:08
14:03:18     14:03:18
14:03:28     14:03:28
14:03:38     14:03:38
14:03:48     14:03:48
14:03:58     14:03:58
14:04:08     14:04:08
14:04:18     14:04:19
14:04:28     14:04:29
14:04:38     14:04:39
14:04:49     14:04:49
14:04:59     14:04:59
14:05:09     14:05:09
14:05:19     14:05:19
14:05:29     14:05:29
14:05:39     14:05:39
14:05:49     14:05:49
14:05:59     14:05:59
14:06:09     14:06:09
14:06:19     14:06:19
14:06:29     14:06:31
14:06:39     14:06:40

XI file adapter polling faster than poll interval

Hi,
We are facing a issue with the file adapter/authorization of the FTPUSER.
We FTP a server and pick up a file from a particular folder.
My polling interval is 2 minutes
My retry interval is space.
Processing mode : ARCHIVE
We are archiving it on a Network attached server(NAS) mounted on our XI server.
When XI polls for the first time it picks up the file but the sender file adapter shows following error in RWB.
<b>2006-01-20 11:31:08 GMT: Error: Deleting of file 'ARUCSjnewb80.txt' failed - cannot proceed: FTPEx: ARUCSjnewb80.txt: Access is denied.</b>
The picked up file gets processed but at the same time just within 12-13 seconds of the first poll XI picks up the file second time and then in another 3 seconds for the third time.
After this the file gets archived thrice in the archive directory and then gets deleted from the source directory.
We are unable to understand why XI is polling again after few seconds of the first poll.(As per my understanding it should have polled after 2 minutes).
I am able to delete the file manually from the Ftp server.
Could anyone give a pointer towards what we are missing or what probable reasons could be?
authorization issue?( XIADM /ftpuser have full authorization)
Some adapter setting?
Regards,
Sulakshana

Hi,
Could you let me know how frequent the file gets loaded to the FTP server.
Is your file size too large to get loaded.. If so try to increase the polling interval. Also make sure that you have provided the polling time in sec and not in minutes...i.e for 2 minutes it should have been specified as 120 sec as polling interval
Regards,
Nithiyanandam

File Adapter Polling issue(Is there critical value of File size )?

Hi
I use File adapter as the Activation to initialize a BPEL process instance .The source data is a kind of Delimited file format.On my PC, when the file size is less than 4M ,everything works fine ,But when the size increased. The BPEL process will not initialize the instance.When the source data is XML data , the "critical value " is about 12M. The error msg is below.
<2005-08-08 12:48:26,209> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Processing file : D:\Temp\WOSSystemIntegration\InBoundFiles\LOADPLAN_DATA_200508041708.xml
<2005-08-08 12:48:29,455> <INFO> <default.collaxa.cube.activation> <FileAdapter::Inbound> Sending message to Adapter Framework for posting to BPEL engine: { file=D:\Temp\WOSSystemIntegration\InBoundFiles\LOADPLAN_DATA_200508041708.xml
<2005-08-08 12:48:40,197> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::l
ogError> Error while invoking bean "cube delivery": Delivery callback message se
rialization failed.
An attempt to serialize the delivery callback messages for conversation "LocalGU
ID:d0b7ccf8e4242850:134b07e:10594606738:-7ffc", message "d0b7ccf8e4242850:134b07
e:10594606738:-7ffb" to binary format has failed. The exception reported is:
<2005-08-08 12:48:40,245> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::l
ogError> Error while invoking bean "delivery": Delivery callback message seriali
zation failed.
An attempt to serialize the delivery callback messages for conversation "LocalGU
ID:d0b7ccf8e4242850:134b07e:10594606738:-7ffc", message "d0b7ccf8e4242850:134b07
e:10594606738:-7ffb" to binary format has failed. The exception reported is:
<2005-08-08 12:48:40,245> <ERROR> <default.collaxa.cube.activation> <AdapterFram
ework::Inbound> [Read_ptt::Read(loadPlanCollection)] - JCA Activation Agent was
unable to perform delivery of inbound message to BPEL Process 'bpel://localhost/
default/P2E_WOS_LP~1.0/' due to: Delivery callback message serialization failed.
An attempt to serialize the delivery callback messages for conversation "LocalGU
ID:d0b7ccf8e4242850:134b07e:10594606738:-7ffc", message "d0b7ccf8e4242850:134b07
e:10594606738:-7ffb" to binary format has failed. The exception reported is:
<2005-08-08 12:48:40,245> <ERROR> <default.collaxa.cube.activation> <AdapterFram
ework::Inbound>
com.oracle.bpel.client.ServerException: Delivery callback message serialization
failed.
An attempt to serialize the delivery callback messages for conversation "LocalGU
ID:d0b7ccf8e4242850:134b07e:10594606738:-7ffc", message "d0b7ccf8e4242850:134b07
e:10594606738:-7ffb" to binary format has failed. The exception reported is:
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialPostAnyType(D
eliveryHandler.java:328)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialPost(Delivery
Handler.java:219)
at com.collaxa.cube.engine.delivery.DeliveryHandler.post(DeliveryHandler
.java:83)
at com.collaxa.cube.ejb.impl.DeliveryBean.post(DeliveryBean.java:181)
at IDeliveryBean_StatelessSessionBeanWrapper22.post(IDeliveryBean_Statel
essSessionBeanWrapper22.java:861)
at com.oracle.bpel.client.delivery.DeliveryService.post(DeliveryService.
java:161)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase$DeliveryServiceMon
itor.send(AdapterFrameworkListenerBase.java:2340)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase.executeDeliverySer
viceSend(AdapterFrameworkListenerBase.java:478)
at oracle.tip.adapter.fw.AdapterFrameworkListenerBase.deliveryServiceSen
d(AdapterFrameworkListenerBase.java:535)
at oracle.tip.adapter.fw.jca.AdapterFrameworkListenerImpl.performSingleA
ctivation(AdapterFrameworkListenerImpl.java:699)
at oracle.tip.adapter.fw.jca.AdapterFrameworkListenerImpl.onMessage(Adap
terFrameworkListenerImpl.java:567)
at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage
(MessageEndpointImpl.java:121)
at oracle.tip.adapter.file.inbound.ProcessWork.publishMessage(ProcessWor
k.java:651)
at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork
.java:456)
at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWo
rk.java:200)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:139)
at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:267)
at java.lang.Thread.run(Thread.java:534)
<2005-08-08 12:48:40,245> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Failed to send message {D:\Temp\WOSSystemIntegration\InBoundFiles\LOA
DPLAN_DATA_200508041708.xml} to Adapter Framework.
<2005-08-08 12:48:40,245> <WARN> <default.collaxa.cube.activation> <AdapterFrame
work::Inbound> [Read_ptt::Read(loadPlanCollection)] - onReject: Sending invalid
inbound message to Exception Handler: file://D:/Temp/WOSSystemIntegration/Reject
edMessages
<2005-08-08 12:49:44,617> <FATAL> <default.collaxa.cube.activation> <AdapterFram
ework::Inbound> [Read_ptt::Read(loadPlanCollection)] - Resource Adapter requeste
d Process shutdown
<2005-08-08 12:49:48,676> <INFO> <default.collaxa.cube.activation> <AdapterFrame
work::Inbound> Adapter Framework instance: OraBPEL - performing endpointDeactiva
tion for portType=Read_ptt, operation=Read
<2005-08-08 12:49:48,676> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Endpoint De-activation called in adapter for endpoint : D:\Temp\WOSSy
stemIntegration\InBoundFiles
<2005-08-08 12:49:49,042> <INFO> <default.collaxa.cube.activation> <AdapterFrame
work::Inbound> JCAActivationAgent::onStateChanged State is changed for process '
bpel://localhost/default/P2E_WOS_LP~1.0/', state=OFF
how can i solve this problem?can i predeploy some parameter? Is there some critical value of File size for the processing of File Adapter ?

Hi,
There is no specific parameters to specify the maximum file size to be read in. It is just limited by the heap size of the JVM running the BPEL engine.
If you have enough RAM on your machine you can change the current heap size from 512Mbyte to 1Go by editing the startorabpel.bat file
and modifying the line :
set MEM_ARGS=-Xms512m -Xmx512m -Xmn300m -XX:MaxPermSize=80m
to
set MEM_ARGS=-Xms512m -Xmx1024m -Xmn300m -XX:MaxPermSize=80m
But only do it if you have at least 1.5 Gb of RAM on your machine, otherwise ot will keep spawing and you will have very bad performance.
Speaking about performance, do you really need to have a BPEL payload of 4 to 12 Mb ?
Will the BPEL process really need to access it ? if so, the best solution would be using batching techniques to cut you file in pieces and process it piece by peice.
FB.

File adapter polling frequency is not consistent in SOA 10g!

Friends,
I have used file adapter for polling files in a service in SOA 10G env. with polling frequency 3600 secs. However, i have noticed file polling is not happening at 60 mins interval, instead some times files getting polled in less than 30 mins but again after sometime its polling correctly in 60 mins interval. I am not sure what could be the reason but i need a solution urgently. Please help!

Could be the managed servers in the cluster are not in sync.
I faced DB JCA adapter sync issues because of Oracle soa suite bug.
You could check whether any sync issues are there with File adapters.

File adapter polling location changing in between the process

Similar Messages

Maybe you are looking for