FIle adapter Test Mode

Hi Guys,
               What are the modes available in File adapter sender and receiver mode? what is Test mode for? can you pls send me a link on file adapter attributes?
XIer

Hi,
Processing mode for File sender:
<b>Archive</b>
Files that have been successfully processed are moved to an archive directory.
To add a time stamp to a file name, select the Add Time Stamp indicator.
Under Archive Directory, enter the name of the archive directory.
If you want to archive the files on the FTP server, set the Archive Files on FTP Server indicator. If you do not set the indicator, the files are archived in the Adapter Engine file system.
<b>Delete</b>
Successfully processed files are deleted.
<b>Test
Files are not processed.
Only use this mode to test the configurations of the file/FTP adapter or the Integration Engine/PCK. It is not suitable for productive operation.</b>
<b> Set to Read-Only</b>
Successfully processed files are given this attribute. Only writable files are processed. This selection is only available for the File System (NFS) transport protocol.
File As receiver you have FILE CONSTRUCTION MODE
<b>Create,Append,Add Time Stamp,Add Message ID,Add Counter.
,</b>
Cheers,
*RAJ*

Similar Messages

  • Running a file in test mode

    hi iam doing a bdc recording in which there is an option to runthe file in test mode i.e if that button is checked then only will the validations will be done and the program should stop executingand save the succesful records at the end of it and should not post even if it doesnot contain ny error.and for the validations display a log file containing the no. of records and details.
    some of the validations are like komg-hland and country of origin of article komg-herkl has to be checked from T005 TABLE.
    The rate unit(currency or percentage)konp-konwa has to be checked from TCURC TABLE.THE CONDITION UNIT KONP-KMEIN HAS TO BE CHECKED FROM T006 TABLE.

    Hi Sushant,
    Just add a Check box in your program and check it by default.
    Perform all the validations expect inserting to the table if the chk param is checked. else insert the value.
    parameter : ip_tstrn as checkbox default 'X'.
      if ip_tstrn ne 'X'.
        perform create_data.
      endif.
    Guess i hav answerd ur q.Is this you have asked ?
    Rgds,
    Jothi.P
    *let me know the outcome.

  • File Adapter archiving mode....

    Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException: Message ID a7cbcf00-4e00-11db-bd7f-0018717400ed(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPSR3DB.SYS_C00135467) violated.
    2006-09-27 17:17:47 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DuplicateMessageException: Message ID a7cbcf00-4e00-11db-bd7f-0018717400ed(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: ORA-00001: unique constraint (SAPSR3DB.SYS_C00135467) violated
    2006-09-27 17:17:47 Error Attempt to archive file "D:\SSNEDI\test\in\queue\20060926070906359.txt" after processing failed. Retry
    source directory : D:\SSNEDI\test\in\queue
    target directory : D:\SSNEDI\test\in\queue\FB
    But, source directory not deleted 20060926070906359.txt.
    Target directory exist file too.
    what's the matter?

    Hi Kim,
    If it is in test mode,the file wont get deleted in your source direcory.  So the adpater will keep polling the file and the server will be flooded with messages.  If it is in the delete mode file will be deleted,archive mode it will be moved in to the archived directory but in the test mode file will not be deleted from your source directory and will be polled continously by the adapter.
    Also go thro' this link:-
    Re: Archiving ftp files
    Hope this provides a solution.
    Regards.
    Praveen

  • File adapter - connection mode

    Hi,
    RE: File adapter
    Can someone please supply me with some information:
    What is the difference between connect mode - permanently/file per transfer?
    When does the connection get closed?
    Thanks,
    Leanne

    Hi,
    Permanently:
    An existing connection to the FTP server is used permanently.
    The connection is reestablished automatically if it is closed by the server.
    ==>> It will not get closed if the data flows continuesly.it will get closed if it is not in use. then when ever the use comes into picture means the connection will be Established automatically.
    Per File Transfer:
    A new connection to the FTP server is established for each file transfer.
    ==>>It will be closed for each and every file Transfer and will be opened every time.
    Connection mode Permanantly will be better, each and every time closing and opening is not recomended
    REgards
    Seshagiri

  • Receiver File adapter Append Mode

    Hi
    I have scenario where i am sending multiple idocs to file ...when i putting the file construction mode to append i can put multiple idoc in to file but i wanna do it on daily basis Means i wanna send the newly crated or changed Idoc on a daily basis to a single file ..
    How can i achieve that
    SV

    Hi
    You can achieve this using dynamic file names.
    Every day different files
    FileName-<DD>-<MMM>
    chk these
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    /people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
    /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
    rgds
    Arun

  • Mainframe Integration using File Adapter (FTP Mode):: ftp commands

    Hi,
    We are trying to integrate with Mainframe system using File Adapter. (FTP mode). We are able to write the file to Mainframe system but not able to format it properly. We had to provide FTP parameter,  <b>ftp.quote site recfm=fb lrecl=150</b>
    As per SAP Note 801926 :: XI 3.0 File Adapter: Additional Parameters, the only parameter that can be used is <b>ftp.timeout</b>. Has anyone tried out using other FTP parameters? (like ftp.quote)
    Any help is grealy appreciated.
    Regards,
    Siva Maranani

    I am looking at running some OS commands especially the QUOTE SITE FILENAME, and found this OSS note:
    https://service.sap.com/sap/support/notes/841704
    In this note it says...
    "Note that for the File Adapter transport protocol "FTP", the operating system command is NOT executed on the FTP server, but on the server hosting the Adapter Engine."

  • File Adapter Advanced Mode - Msecs to Wait Before Modifications Check

    Hi, Can anybody tell me how to set this parameter "Msecs to Wait Before Modifications Check" in PI 7.1? I don't see this parameter at all. In advance mode of PI 7.1, we just have Maximum File Size(bytes). Also when I checked the SAP note 801926 for Advanced Mode we can just set only
    1. Parameter name: "clusterSyncMode"
    2. Parameter name: "ftp.timeout"
    Please let me know if anybody has configured this already in PI 7.1.

    Hi Ravi
    I think this feature is no longer supported in PI 7.1. Although it work with PI 7.0 for NFS and non FCC only.
    Thanks
    Gaurav

  • File Adapter Sender - Does XI support Active connection mode?

    Does the file adapter support Active connection mode?

    What do you mean by this? R u talking about FTP connections?
    VJ

  • Sender FTP Adapter, text mode should convert source file?

    Hi !
    We have a Unix file system where systems and people drop files to be captured by XI. XI runs also on another Unix system.
    We configured the Sender FTP comm channel from XI to use the TEXT mode, to have converted the captured file to Unix TEXT (eol = 0x0A), no matter the format of the file used to transfer the source file to the XI polling folder.
    But we noticed that TEXT or BINARY modes in sender FTP adapter works all the same, like binary.
    What are we doing wrong?
    Thanks,
    Matias

    No. to see the difference put a gif and give txt in file adapter you will get an error for the same file u use binary it works.
    their is difference b/w these . if you use special characters like european then you need to use UTF-8 or UTF-16 or bigInidan  if it is binary then you output will junk charaters for these sysmobls
    Message was edited by:
            Sreeram Reddy

  • File adapter processing in FTP mode

    Hello SDN,
    I need some info on File adapter working in FTP mode.
    What happens when we point to a remote file location that runs on FTP server?
    FTP in standard does not support a remote read operation at all. So the only possible logic that strikes me is issue a FTP get command over the file and get the file locally, read it. Does it happen this way? Or SAP has customised FTP to enable the read operation from a remote location directly?
    Regards,
    Jai Shankar

    Hi Jai,
    I am sure you must have gone through this File/FTP help file earlier also. If you read the Procedure section of it, I think it will give you a clear idea what exactly happening there:
    http://help.sap.com/saphelp_nw04s/helpdata/en/0d/00453c91f37151e10000000a11402f/frameset.htm
    Regards,
    Subahsha

  • SP9 on PCK - file adapter configuration or Messaging System Test

    Hi,
    I have upgraded my XI 3.0 PCK from SP1 to SP9. This is fine but now I do not have the Messaging System Test JSP
    (I could not install the old one).So I would like to
    configure the file adapter to send to my adapter some outbound messages.
    I have tried configuring the file adapter as
    I do on full XI server but the file adpater on PCK
    just doesn't want to recognize the binding. No error logs, nothing. Any ideas what could be wrong ?
    Sincerely,
    Maxim Naidenov

    The configuration of the PCK is different to the XI.
    You need:
    Communication Channel:
    -> for Sender (File)
    -> for Receiver (XI) (Here you enter the URL of the XI)
    sender agreement (matching sender channel and interface)
    receiver agreement (matching receiver channel and interface)
    As the XI needs the same configuration for partner and service as the PCK, you should create two partners for PCK and XI and assign the sender channel to the service belonging to the partner PCK and the receiver channel to the service belonging to the partner XI.
    I hope that helps
    Stefan

  • XI 2.0 WorkBench File Adapter Self-Test Error

    I have installed the file adapter on our XI serve and when I perform the Self-Test I get the following error HTTP request failed. Error code: "401". Error message: "Authorization Required".  I have the user  XIRWBUSER defined to the Adapter Engine.  What else am I missing?

    Hi Dan,
    You are thanking a poster for his answer.
    Please next time also give him points.
    See: /people/mark.finnern/blog/2004/08/10/spread-the-love
    This time I did it for you.
    Remember: When you ask a question you also assume the responsibility to assign points.
    Please check your other questions and if the answers were good.
    Spread the love and give some points.
    Thanks in advance, Mark.

  • Testing Outbound Scenario with File Adapter

    Testing an Outbound Scenario, This uses File Adapter. I checked Payloads in the Transaction SXMB_MONI in R/3 as well as XI. There was no message for error. So I suppose to get the data downloaded to a directory. The output file is a text file. The file is not getting downloaded. Can any one please help me out to solve this issue? Please let me know if you need any more information.
    Transport protocol: FTP.
    Message Protocol: File Content Conversion
    Adapter Engine: IS
    Thanks,
    Rajan.SA

    Chcek whether your Receiver Adapter is activated properly.
    http://<host>:5<sysnumber>00/mdt/amtServlet XI > SP09
    http://<host>:5<sysnumber>00/AdapterFramework <= SP09
    If everything is correct, check the message in the Adapter Engine
    http://<host>:5<sysnumber>00/MessagingSystem for the receiving message. You will find more information here why the message is failed to deliver to the endpoint.
    regards
    SKM

  • Testing File Adapter

    Hi,
    I'm using a file adapter with content conversion. I have isolated the problem and am sure there's a problem with the conversion. Is it possible to see the result of the content conversion, meaning to see the XML that is produced?
    I'm currently using the test configuration at the Integration Directory. It only shows a runtime error at Interface Mapping, which is far from helpful.
    Thanks,

    Hi
    May be you have some different issue other than mapping.
    Set the file at source location and then check with RWB communication channel paylaod and SXMB_MONI  inbound message. If it fail in mapping then too you can see the XML produced by FCC
    Thanks
    Gaurav

  • How to test File Adapter from EM Console

    Hi All,
    I have one issue with File Adapter where I am trying to implement a simple BPEL process. Below are the steps;
    1. I have created an empty BPEL process and then add a read file adapter to the left side which will read from a file aa.txt which is present in D:\work folder. File is having data like XXXX,YYYY,ZZZZ. (I have used Native builder for schema generation)
    2. Then I have added Write file adapter on the right side which will write to an other file bb.txt.
    Then I have rebuild and deploy this on weblogic SOA server but on the EM console I am not able to test it as Test button is disabled. Then how to test this scenario? Also I tried testing by placing a new file aa1.txt in the same directory with some content. Logically it should be picked up and then write it to the bb.txt but it is not happening.
    Can anyone please help me in this as how to troubleshoot it.
    Thanks
    RJ

    Thanks for the reply.
    So if i understood correctly it means that we cannot test it using EM console as we have read adapter on the left side because of which we have not exposed it as SOAP service. When we put any file in the D:\XXX then automatically read adapter will pick that up and create one instance in the EM console and then write adapter will write it into the destination file?
    But in our case no instance is getting created in the EM console even when I am copying a file to the directory. Below is the read_file.jca
    <adapter-config name="Read" adapter="File Adapter" wsdlLocation="Read.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/FileAdapter" UIincludeWildcard="rj*.txt"/>
    <endpoint-activation portType="Read_ptt" operation="Read">
    <activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
    <property name="DeleteFile" value="false"/>
    <property name="MinimumAge" value="0"/>
    <property name="PhysicalDirectory" value="D:\mywork"/>
    <property name="Recursive" value="true"/>
    <property name="PollingFrequency" value="60"/>
    <property name="IncludeFiles" value="rj.*\.txt"/>
    <property name="UseHeaders" value="false"/>
    </activation-spec>
    </endpoint-activation>
    </adapter-config>
    Please help as why it is not getting picked up?
    Regards
    RJ

Maybe you are looking for

  • Require a BAPI which will do VL02N posting,PGI and create an Invoice

    Hi Gurus, My Requirement: I will be getting an excel file from the legacy system which will provide me with the Delivery numbers whose Shipment has been confirmed. I need a BAPI which will post the picking in VL02N for those Deliveries and do the PGI

  • How do I restore my iTunes Library to an earlier time?

    I accidentally deleted one of my favourite playlists that I modified occasionally in a span of 3 years.. (because I was cleaning my keyboard) Because of this, not only did I lose 3 years of fixing a perfect playlist, but in an attempt to fix this, it

  • Creation of Transfer Order takes a long time and finally throws spool error

    Hi, I create Sales Order of type OR. I do delivery successfully. But when i proceed to create Transfer Order, it takes painfully long time and finally after painful 30 mins or so, it throws a error message, 'Error in spool call' with a blank page. I

  • Permissions issue in moss 2007

    Hi , I have site collection under that couple of subsites as well, there are different SP group  foreach  subsite. the group permission level is Contribute. permissions were broken from parent. from one subsite group one of the user is suddenly not g

  • Regular expression wierdness

    Can somebody please help me make sense of the following behavior? Consider the following code: import java.util.regex.*; public class Foo {     public static void main(String args[]) {         String str = "This is a test";         String pat = "i";