File Adapter Transactional in SOA and OSb
Hi All,
Is file adapter transactional in SOA and OSB. I have a requirement where a inbound file adapter polls for a file and it is consumed by a topic.If topic is down,how can I know that the same file will goes to topic when is up(how can I make it transactional).I want to do this both in SOA ans OSB.
Any help would be appreciated.
Thanks,
Kumar.
Hi Kumar,
File Adapter itself is NON TRANSACTIONAL...
4.2.9 Nontransactional
The Oracle File Adapter picks up a file from an inbound directory, processes the file, and sends the processed file to an output directory. However, during this process if a failover occurs in the Oracle RAC back end or in an SOA managed server, then the file is processed twice because of the nontransactional nature of Oracle File Adapter. As a result, there can be duplicate files in the output directory.
http://docs.oracle.com/cd/E28280_01/integration.1111/e10231/adptr_file.htm#BABIEBJF
Cheers,
Vlad
Similar Messages
-
Dynamic endpoints in SOA and OSB 11g
Hi,
In AIA we have aiaconfiguration properties.xml from where end points of wsdls will be accessible.
This enables ease in migrations so that if endpoint changes it is only need to be changed in aiaconfiguration properties.xml.
Can the same be acheived in SOA and OSB 11g projects?
Thanks,
SowmyaHi Sowmya,
Yes, it is very much possible in OSB 11g using customization (you may use it manually or programmitically). Please refer -
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15867/customization.htm#CACJCAGD
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15022/toc.htm
Regards,
Anuj -
MTOM attachment configuration in SOA and OSB
Hi All,
We have a requirement to send Email to two SMTP gateways through OSB 11g, but due to constraint that we can not apply OWSM policies on MTOM enabled OSB service in OSB 11g, we are working on approach of routing request from SOA 11g to OSB so that policies can be applied on SOA service and actual Email Notifications will be sent by OSB.
But SOA is sending MTOM attachments as encoded value but OSB is configured to receive MTOM attachments as reference. OSB can also be configured to take MTOM attachment as value but we also need to set 'xop:include'.
Any pointers on setting OSB 'xop-include' or making configuration in SOA to send attachments as reference will be of great help.
Thanks,
SowmyaHi Kumar,
File Adapter itself is NON TRANSACTIONAL...
4.2.9 Nontransactional
The Oracle File Adapter picks up a file from an inbound directory, processes the file, and sends the processed file to an output directory. However, during this process if a failover occurs in the Oracle RAC back end or in an SOA managed server, then the file is processed twice because of the nontransactional nature of Oracle File Adapter. As a result, there can be duplicate files in the output directory.
http://docs.oracle.com/cd/E28280_01/integration.1111/e10231/adptr_file.htm#BABIEBJF
Cheers,
Vlad -
File Adapter creating huge connections and not releasing.
Hi,
We see high no. of current connections in file adapter from weblogic console against eis/HAFileAdapter under deployments -> fileadapter -> monitoring -> Outbound Connection Pools and are concerned about the same. It seems like fileadapter is not releasing the connection and hence no. of connections are piling up over a days and depending upon the transactions. coz after a restart the values comes down from 36000 to 10 ( which is default initial connection).
But when i see at the datasource level i don't see that much number of active connections. Need to know why this is happening and is this behavior is expected?
We are using SOA 11g PS2
Below is the deployment plan for fileadpater in use:
<?xml version='1.0' encoding='UTF-8'?>
<deployment-plan xmlns="http://xmlns.oracle.com/weblogic/deployment-plan" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/deployment-plan http://xmlns.oracle.com/weblogic/deployment-plan/1.0/deployment-plan.xsd" global-variables="false">
<application-name>connectors</application-name>
<variable-definition>
<variable>
<name>ConfigProperty_controlDir_Value_12732617703910</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_12737938820080</name>
<value>oracle</value>
</variable>
<variable>
<name>ConnectionInstance_eis/HAFileAdapter1_JNDIName_13010279387490</name>
<value>eis/HAFileAdapter1</value>
</variable>
<variable>
<name>ConfigProperty_controlDir_Value_13010283495591</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13010283655032</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13010283782973</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13010283877514</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13010283941445</name>
<value>oracle</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13081683627140</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13081683875571</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13081684137432</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConnectionInstance_eis/HAFileAdapter_Wedb_JNDIName_13369118887880</name>
<value>eis/HAFileAdapter_Wedb</value>
</variable>
<variable>
<name>ConfigProperty_controlDir_Value_13369119117411</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13369119237302</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13369119486683</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13369119703484</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13369119820485</name>
<value>oracle</value>
</variable>
</variable-definition>
<module-override>
<module-name>FileAdapter.rar</module-name>
<module-type>rar</module-type>
<module-descriptor external="false">
<root-element>weblogic-connector</root-element>
<uri>META-INF/weblogic-ra.xml</uri>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_12732617703910</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_12737938820080</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConnectionInstance_eis/HAFileAdapter1_JNDIName_13010279387490</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_13010283495591</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13010283655032</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13010283782973</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13010283877514</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13010283941445</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13081683627140</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13081683875571</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13081684137432</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConnectionInstance_eis/HAFileAdapter_Wedb_JNDIName_13369118887880</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_13369119117411</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13369119237302</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13369119486683</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13369119703484</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13369119820485</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
</module-descriptor>
<module-descriptor external="false">
<root-element>connector</root-element>
<uri>META-INF/ra.xml</uri>
</module-descriptor>
<module-descriptor external="true">
<root-element>wldf-resource</root-element>
<uri>META-INF/weblogic-diagnostics.xml</uri>
</module-descriptor>
</module-override>
<config-root>/opt/soauser/products/soa11.1/Oracle_SOA1/soa/connectors/plan</config-root>
</deployment-plan>
-RohitHi Arik,
To answer your questions :
You are using HAFileAdapter in your processes JNDI defenitions? --Yes
Check in your HAFileAdapter Connection Pool if Shrinking Enabled is set to true. --Its set to true
I would recomend also to change the properties Test Connections On Reserve to true, and Test Frequency Seconds(900 is the default). --These properties are also in place
-Rohit -
Dynamic Adapter (endpoint) with SOA suite/OSB
We have a requirement to set the adapter type for referenced services during the runtime, that is to say that we cannot decide whether to use FILE adapter, FTP adapter or JMS adapter or Web Service during design time.
I know we can use dynamic partner link to set the properties of adapter (for example, dynamic set the output folder for FILE adpater), but can we even set the adapter type during the runtime? For example, use FILE adpater if order amount < 1000, otherwise use FTP adapter.
I'm fresh with SOA suite and OSB. Can anybody help me out?
BTW: without OSB service virtulization, is it possible to change the adapter for composition service after deployment. For example, in design time, I used Web Service for composition service (one-way), but after deployment, i'd like to change it to FILE adapter.
Much appreciate in advance.
KevinHi Kevin,
For example, use FILE adpater if order amount < 1000, otherwise use FTP adapter.For this use case, you may easily use Dynamic Routing action in OSB. Please refer -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1100135
Re: OSB proxy service lookup
Regards,
Anuj -
File adapter polling a folder and accepting a single document at a time?
Hi,
Is it possible to make file adapter read a single file at a time though it is polling a directory that may contain more than one document?
In other words is it possible to make file adapter reading documents sequentially?
Do I need to put a queue to achieve this?
Queue will read the incoming documents and puts the documents to another directory one by ome so that the file adapter picks up only one file at a time?
Thanks,
Sasi BhushanHi,
have you read
http://download-uk.oracle.com/docs/cd/B31017_01/core.1013/b28941/soa.htm#CEGJIDAC
There is explained what concurrency level you can achieve for adapters... -
Sender File Adapter. Fixed Lengths and Field Separator
Hello guys,
I have a doubt in Sender File Adapter with Content Conversion.
I have a text file like:
a,b,c,,e
I have the configuration in the adapter:
Register.fieldNames: a,b,c,d,e
Register.fieldSeparator: ,
The question I have is can I format the length of the text when i create the XML?
I woul like to create the XML like:
<Row>
<Register>
<a>a </a>
<a>b </a>
<a>c </a>
<a> </a>
<a>e </a>
</Register>
</Row>
I would like that when I create the file in Field A I have length = 4, but I have only 1 in the entry, and I want to fill the rest of the length with spaces.
I tried with FieldFixedLengths but when I test it the fields are not being formatted and take the commas as part of the field.
I know that this can be done in Receiver File Adapter, you leave for example one field of 5 length and you format it to 12 length with spaces.
Is this possible for Sender File ADapter?
Many thanks.
Regards,
Xavi.hi,
See the example given in this bog, in this blog the string has been splited into different fields as per the field length, so you may use the same concept to get your output.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
I hope it helps you.
Regards,
Sarvesh -
Receiver File adapter : two choices "Directly" and "Use Temporarly file" ?
Hi All,
I am writing the file into a folder and I want to write the file completely into the folder.Once the file is placed , one tool will be keep on picking files every second from this folder.So I need to put the file after filling entire data.
In the File adapter, the put file option has two choices "Directly" and "Use Temporarly file".
"Directly" option will serve my purpose?
Which option I need to keep for Empty-Message Handling "Write Empty file" or "Ignore"?
Thanks
SeemaHi Mohamad,
>> You need to place in the some other folder and do the transfer completely and move the file to desired location using command line parameters as recommended in the previous answers.
I will be posting all the files as .txt files. Can we move the file by using command line parameters for FTP connection?
I heard that we can get do it only for NFS and we cannot do for FTP connection.?
Can you please suggest the command line how to use it.
Thanks
Seema -
File Adapter is not working and create client copy in NW 7.0?
hi,
this is sreeram.i installed and configured PI 7.0 SR2 but file was not picking up from the input folder.i can able to select file adapter when i am creating communication channel.i gone throw RWB component monitoring->Adaptor monitoring there i seen all adaptors are in faded color not in green.can any one help to resolve the proble?
one more question is i created 3 clients from 000 client using tcode scc4.when i am entering with SAP* and password is: pass it's not entering into that client.i also tried username: SAP* password as : password pls tell me SAP* password in NW 7.o?Hi,
Take a look at the forum links looks like same problem
HTTP Response: 500 internal server error
HTTP adapter - 500 Internal server error
Message mapping-Urgent
Can you go through the below urls:
calling soap error
SOAP - XI - SOAP Error
Error while Testing SOAP Adapter In XI
Please reward points if it helps
Thanks
Vikranth -
How to create Headervariable for File adapter in 11g SOA Suite?
Hi All
My process in reading file and I wanted to know the exact name of the File.
In 10g, we have fileAdapterInboundHeader.wsdl and create HeaderVariable using message type used in this wsdl and can get file and directory name in this variable But in 11g we dont have any wsdl like this.
Can anybody give me some idea how to create Headervariable for Inbound file adapter to get file name?
Thanks
VibzzHi,
Look at this document : [Oracle JCA Adapter for Files/FTP|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#CIAFJCCE]
Romain. -
SOA and OSB servers in Admin State
I created two soa servers in a cluster and two osb servers in another cluster. When I start my servers they go to admin mode and I can't get them to go to starting mode. From what I read, certain libraries and applications need to be deployed to the servers. I did that while creating the servers and clusters. What might have been wrong?
Thank youHi,
When you created your clusters, have you followed the Enterprise Deployment Guide?
http://docs.oracle.com/cd/E23943_01/core.1111/e12036/overview.htm#CJABGFEA
You will have to check the servers log files to see why they are sitting in admin mode, be aware that they will take a while to start on the first time, from the second onwards time they tend to be faster.
Go to your %DOMAIN_HOME%/server/<your-server>/logs and look for <your-server>.log and see if there is some error messages there. Post the messages here and I can help you out.
Cheers,
Vlad -
File Adapter Issue in SOA Suite11g
Hi,
I have been facing a strange issue while testing my BPEL process.
I have a BPEL process which reads input as event listener and then does a small transformation
At last its writing that output message into a txt file using FileAdapter.
While testing the BPEL process, its showing success instance id but no files are generating.
When I was checking at Audit Trail, its showing the output message is being passed into the FileAdapter.
Same time I was checking the server log, but there was no error/exception.
Can anyone help me to resolve the problem?
Note:
I have been using SOA Suite v11.1.1.4 & have configured FileAdapater with option of Logical Path
Regards,
DebaHi,
My problem got resolved.
There was some access issue to see the txt files at the File Directory.
Thanks. -
File Adapter Question in SOA 11g
Hello,
just started with this soa stuff and looks like it can be very useful, i have a question:
i am doing a SyncRead within a bpel process and want the file is not necessarily there as soon as that process runs, so if it doesnt find it i want it to wait 5 seconds and retry and i want it to retry this up to 3 times...
what is the best approach to getting this done?
thanksHi,
You can put the invoke(synchRead) within a scope activity. Now add a catchAll activity, and within it add wait activity(5 sec') and replay activity.
The replay activity will always start the scope from the begining.
You will also need to add an if condition with 3 times counter. 1 branch will go to the above activities, and the second one will continue with the process.
Arik -
Need Help-SOA 11g File Adapter unable to delete input file and its crashing
Hi All
Please find the details below:
1. We have created a simple SOA composite to Read file from an input directory, archive the file in an archive directory using Inbound File Adapter Read
and then use Outbound File Adapter Write to move the file to a output directory.
2. File Adapter needs to delete the file after successful read/retrieval.
3. We are using the "Use Trigger File" for invoking the file adapter. This is a new feature in SOA 11g
4. Also we are using the option of reading the file as an attachment as we are not doing any transformation in the composite
Issue Details_
1. When the trigger file is put in the input directory for the first time, the File Adapter reads the file, archives it and moves it to the output directory
2. However it does not delete the input file from the input directory and raises Fatal Exception mentioned below:
[*2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]*
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC PostProcessor::
Delete failed, the operation will be retried for max of [0] times
[2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC [[
BINDING.JCA-11042
File deletion failed.
File deletion failed.
File : C:\Dibya\AttachmentTest\InputDir\TestFile3.txt could not be deleted.
Delete the file and restart server. Contact oracle support if error is not fixable.
If any one has faced similar issues, kindly provide pointers on how to resolve it.
Regards,
DibyaHi,
Using the file adapter, you can poll from multilple locations...
Keep the following property in your .jca file
<property name="DirectorySeparator" value="," />
While giving the path in File Adapter configuration, keep comma and give the next location....then the file will be picked up from the locations you gave....
Hope this helps...
Thanks,
N -
Accessing JMS UDD deployed on OSB cluster from a composite JMS adapter deployed on soa cluster
Our environment setup
Single domain with three clusters
osb_cluster.soa_cluster and bam_cluster
osb_cluster: osb_server1 and osb_server2
wlsbJMSServer_auto_1: targetted to osb_server1
wlsbJMSServer_auto_2: targetted to osb_server2
osb_subdeployment1:targetted to wlsbJMSServer_auto_1 and wlsbJMSServer_auto_2 JMS servers
osb_subdeployment1 has JMS UDD queue jms/wlsb/queue
soa_cluster: soa_server1 and soa_server2
There is a BPEL composite deployed to soa_cluster. It has JMS adapter trying to read messages from jms/wlsb/queue
JCA JMSAdapter is deployed to osb,soa clusters and Admin server
ConnectionFactory is targetted to soa and osb clusters (osb_cluster and soa_cluster)
We have bounced soa and osb servers(not admin) after jms changes.
soa log says
JMSAdapter Composite1l JmsDDEndpoint_onFailure: Unable to resolve 'jms.wlsb.queue. Resolved 'jms'
Can we access JMS destinations deployed on one cluster from different cluster?
If yes, how can we do that ? do we need to modify BPEL JCA file to indicate destination is on another cluster?
Thanks,
PraveenAnybody has faced similar issue?
Maybe you are looking for
-
Windows Keboard and Booting Problem (on a Mac laptop)
Hi, I've been putting up with a really strange (and annoying) problem that my laptop has been going through. I have a Santa Rosa MacBook Pro with OS Leopard, and I put on a Windows XP Pro (with Service Pack 2) NTFS partition. It used to work fast at
-
Contacts as an Autodialer?
I have a fax machine, and VOIP telephone, is there any way to use Contacts as an Autodialer?
-
Changing .include structure does not reflect in the original Table.
Hi Experts, I have a .include structure by name SDOKLO_INC referenced for table SRMTST07. As a part of unicode conversion, I have to Uncheck the Text Lang check box of Datalement SDOK_MSLAN. Hence I opened the structure of SDOKLO_INC and did the cha
-
Brand new macbook won't start up. Help.
I recently received a brand new macbook as a graduation gift about 3 weeks ago. All has been absolutely fine until yesterday. I checked my email in the morning, closed the macbook and left for work. When I came home, I opened the macbook and pushed t
-
Remove budget in Project System from prior fiscal years
Hello, Budget control has been activated in PS. In PS, it is on annual budget so there's budget and actuals in FY 2003, 2004, 2005, 2006, & 2007. Is there a way to remove the annual budget in those Fiscal Years? I've deactivated budget control usi