File Conversion error in Receiver File Adapter

Hi ,
I am facing the below error in receiver file adapter .
Conversion initialization failed: java.lang.Exception: java.lang.NumberFormatException: For input string: "4|8|10|2|10|4|10|4|40|40|40|1|20|2|20|8|40|0|12|12|12|1|12|4|4|8|40|8|8|8|8|12|40|8|10|10|10|10|10|1|10"
Kindly suggest !
Regards,
Hemanthika

Hi,
Check it - File adapter is active ? try to Re-activate the same.
Also do CPACache Refresh.
Still problem, tyr out by restarting the Adapter Engine.
I guess you're just trying to send all the data in your file record to a <data> element as a whole. If so, this blog will help you:
Configuring Generic Sender File CC Adapter
Under certain operating system platforms, such as Solaris, the APIs used by the Java Runtime (JRE) are not Unicode-aware. Consequently, the JRE needs to be configured to correctly interpret the character set it receives from the operating system.
This is configured through the "file.encoding" system property as well as the "LANG" environment variable.
Make sure you set "file.encoding" to a character set (such as ISO-8859-1) that supports the special characters you would like to process. This system property can be configured by appending "-Dfile.encoding=<encoding>" to the Java VM parameters section of the SAP J2EE Config Tool.
Additionally, you need to set the "LANG" environment variable to a locale that supports more than 7 bits, such as "de.ISO8859-1". The encoding you specify in the LANG environment variable needs to match the encoding set via "file.encoding".
You can persistently configure the environment variable by setting it in the profile $HOME/.sapenv_$HOSTNAME.csh of the <sid>adm user: setenv LANG de.ISO8859-1
Refer this article
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
See below link
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please refer this thread .
File Adapter Not Initialized Error
Cheers,
Regards,
Suryanarayana

Similar Messages

File conversion error when combining files

Hello,
I am using Adobe Create to combine several files (both word and pdf) into a single pdf document. I have done this several times in the past with no problems. However today it won't allow me to combine any documents which are already in pdf format. The system generates an error for each of these documents as: "Conversion Failed". I am clearly not trying to convert them, but rather to combine them... Any ideas?

Hi gina_hall_7848,
If you're combining both Word and PDF files into PDF, there is some conversion happening (with the Word docs, as they're converted into the combined PDF file). If you're getting the error when combining only PDF files--that's another story. It could be that one or more of the files that you're combining isn't in a supported format, or that Adobe PDF Pack is timing out before it can complete the conversion.
Does the error occur regardless of what files you try to combine?
Best,
Sara

File to JMS Scenario - Error is Receiver JMS Adapter

Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Error In Receiver BC adapter(EOIO not supported by protocol BC.)

Hi Experts ,
My Scenario is ABAP proxy to SAP BC .I had bellow error in Receiver BC adapter .
Adapter Framework caught exception: Delivery semantics EOIO not supported by protocol BC.
Error Delivering the message to the application using connection BC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.InvalidParamException: Delivery semantics EOIO not supported by protocol BC..
Please help how to resolve this .
Regards
Upendra.V
Edited by: upendra v on Oct 4, 2010 2:08 PM

HI Anuradha,
Check the below link for receiver mail configuration and follow the steps accordingly.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
Regards,
Naveen

Is there a file conversion for CC2014 Indesign files to be read by CS6?

Is there a file conversion for CC2014 Indesign files to be read by CS6?

Hi John,
Please check: Open InDesign files in previous versions
Kindly try this feature in trial mode Creative Cloud Help | Download, install, update, or uninstall apps.
Please share if it works for you, or if you need further assistance with it.
Thanks,
Atul Saini

File upload error: Error uploading file. Error moving uploaded file from temporary folder. (FILE_UPL

what causes this error:
File upload error: Error uploading file. Error moving uploaded file from temporary folder. (FILE_UPLOAD_ERROR)

On 5/17/07 4:26 PM, in article [email protected],
"Gü[email protected]" <> wrote:
>
> To my experience servers behave differently -- on some I really had to use
> 777, others are happy with 755.
>
> in regards to "any user" :: On most ADDT respectively MX Kollection - based
> backends I made the image & file upload feature available to user having e.g.
> the "levels" 1 & 2, but not 3 -- I wouldn´t expose something like this to all
> users
>
> Günter Schenk
> Adobe Community Expert, Dreamweaver
My backend is only for admin, so they are the only ones who can access the
upload pages. My concern is an images folder on the site being 777. Can't
anyone from the outside plant a file in that folder if they just know where
to find it using an ftp program? ?

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

Error at Receiver File Adapter

Hi All,
Mine is FILE (txt) to FILE (txt) scenario with content conversion.
No problem from SENDER FILE adapter.
No problem in XI pipeline processing.
Error at receiver adapter:
The eror is:.. 1.fieldSeparator is missing or 1.fieldFixedLengths is missing...
Though, I have checked at Receiver Adapter configuration that
*.fieldSeparator is properly filled.
There are no optional fields as such in the input file.
Thanks,
Shaily

Hi,
Check the links on FCC and compare what u have gave is correct or not.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful

** File Content Conversion Error in Receiver CC - How to solve this?

Hi friends,
My target structure looks like below.
EmployeeJobDetails                                        --> Message Type
   JobCode                                                      --> Node
        EmployeeNumber            xsd:string
        Domain                           xsd:string
   JobTrack                                                     --> Node
         Department                    xsd: string
         Position                         xsd: string
I use the FCC parameters in the receiver CC as below:
Recordset Structure:    JobCode,JobTrack
JobCode.fieldSeparator = |
JobCode.endSeparator = 'nl'
JobTrack.fieldSeparator = |
JobTrack.endSepartor = 'nl'.
Because, we want the output like below
1099|Raja
Accts|JuniorAccountant
1100|Ram
HR|Recruiter
like this.
In this scenario Source is XML and target is txt file.
I am using XSLT Mapping. The FCC works fine, if my source input file contains some records. But, when we send empty source XML file as below
<?xml version="1.0" encoding="UTF-8"?>
<EMPLOYEE_DATA/>
Mapping works fine. Message is processed successfully in SXMB_MONI. The payload in response also comes with Message Type name like below
<EmployeeJobDetails    namespace >
</EmployeeJobDetails>
While convert this, the system throws below error.
Error Message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)'
Friend, how to convert this when source XML is empty.
But, if we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the same empty XML file FCC is working fine and we get the target text file 0 KB. (Amazing !!)
But, in the first case, how to solve the issue?
Kind Regards,
Jegathees P.

Hi friends,
If we remove JobTrack node in target strucutre and remove the JobTrack parameters in CC, then if we send the <b>same empty XML file</b> FCC is working fine and<b> we get the target text file 0 KB</b>. (Amazing !!)
But, if we give parameters like JobCode,JobTrack then send pass the same empty file, we face the problem 'File Content Conversion' Error.
Searching solution for this problem ...

Error in Receiver File adapter - FCC

Got error message as "File Adapter Receiver Channel CC_OB_REQ: Not initialized - cannot proceed: null"
My requirement is to send IDOC to file which consists of 4 fields, My target message interface is
MT_REQ
FILE_STRUC
    FILE_OP
       AAA (Field1)
        BBB(Field2)
       CCC(Field3)
       DDD(Field4)
Output file should contain the above 4 fields with fixed lengths 20,1,1,2
So I declared FCC in File Adapter as
I tried many options
RecordSet Structure: MT_REQ,FILE_STRUC,FILE_OP
FILE_STRUC.fieldSeparator - 'nl'
FILE_OP.fixedFieldLengths - 20,1,1,2
FILE_OP.fieldSeparator - 'nl'
FILE_OP.endSeparator - 'nl'.
Please let me know where is the problem?
Thanks in advance,
Krishna

Hi Ramakrishana,
In FCC fixed length file format when your XML payload is goes to Adaptor engine, it should contain all fields in XML. Otherwise its throw error in FCC channel. Please check receiver payload at SXMB_MONI or message monitoring of Run time work bench. In that payload you will find that some of the fields is not generated in target payload.
Field in receiver payload is not generated means from sender payload corresponding field is not coming. As per my past experience this generally happens in IDOC sender.
solution:- In message mapping in every field from IDOC to file use mapWithDefault node function with null value. Due to this though if any field do not generates in IDOC, corresponding field will generate in File Payload and it will not throw error in FCC.
Regards,
Prashant

Error in Receiver File Channel...in MTB module (Urgent)

Hi,
I am working on a Proxy to File scenario. I am using Message Transformation Bean in receiver file channel to convert xml file into fixed length file. I am getting an error : Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: java.lang.Exception: Exception in XML Parser (format problem?):java.lang.NullPointerException'; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):java.lang.NullPointerException
in MTB step of audit log for comm channel.
Please help me resolve this.
Thanks,
Jaya

Hi ,
"Transform: failed to execute the transformation:"
Pls check ur data what u have to send .. any missing information or any special Chacters or any extra fields are available in the data, this type of transformation error raised.
check once again ur mapping transformation and test the mapping in INTEGRATION REPOISTERY with the same data(what u have to send Previously).
and also check ur adapter status in RWB.
Regards,
Sateesh N.
Edited by: Sateesh N on Apr 21, 2008 1:53 PM

File-Proxy (Error while receiving by HTTP )

Hi All,
I have a problem in the scenario file to Proxy....which is that after placing a source file successfuly in the source directory.... it is showing an information message in the XML message monitoring(sxmb_moni) like below
Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)
Could anybody explain the problem please????where i need to configure to reslove this.
Thanks.
Respond me Imme pls.

First thing to check is that the adapter_plain service is activated in the transaction SICF. (path: default_host-> sap -> xi -> adapter_plain
Then check that the http service is running properly (transaction SMICM).
Also, unless you are connecting to an SAP webAS, you should give a username and password, rather than "Use Logon data fotr SAP System". You could also maintain the URL and authentication data as an sm59 destination and use that in the adapter.
Please look at these...
INTEGRATION_DIRECTORY_HMI: Connection fails
ICM_HTTP_CONNECTION_FAILED
SAF - ICM_HTTP_CONNECTION_FAILED
HTTP adapter setup
Check out this SAP Note- 824554
Also this links
ICM_HTTP_CONNECTION_FAILED
Cache Refresh~
https://websmp201.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
ICM_HTTP_CONNECTION_FAILED ERROR
error code: 400, error text: ICM_HTTP_CONNECTION_FAILED
Error With ABAP Client proxy
Message not reaching Integration server
HTTP content sever - error?
Error in content server configuration
HTTP Client : Code 110 reason
RFC: INTEGRATION_DIRECTORY_HMI
Content server config - error?
Thanks
Swarup

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Dynamic file name (Date) in Receiver File Adapter

Hi,
can any one tell me how to create outbound file name with receiver file adapter in format like Name_22-08-2006.dat. I need from a current Date in the name of the message (without any other information). In message payload I dont have that date. Is it possible to use variable from user defined function in message mapping for that name?
Regards,
Naycho

Naycho,
that's exactly what I've managed to perform using DynamicConfiguration. Check these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/09b16006526e72e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/frameset.htm
Particularly, I've created a Java API for using setDirectory and setFileName methods through mappings. I use XSLT with java enhancement because it's a million times easier to parse and get node values with XSL than pure java.
I'm writing a blog on the subject, if you don't resolve the problem until it's out, let me know.
Regards,
Henrique.

Target Directory & File Name parameters in Receiver File Adapter with ASMA

Hi Experts..
I have the following question....
What am I suppose to inform in the Target Directory & File Name obligatory parameters in Receiver File Adapter if I am using ASMA to fill it? Is it any dummy value?
Also, if you have any step by step guide/blog to forward on how to use ASMA in file adapter I will be greatful.
Thanks in advance,
Daniela

You can give any dummy value in dir and file name... Just go through these blogs
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot

File Conversion error in Receiver File Adapter

Similar Messages

Maybe you are looking for