Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

Similar Messages

Problem with reciver file adapter in the content conversion.

I have starnge situation where the fileds in the file created after the content conversion are center aligned.
Can someone let me know how to make it right aligned?
For eg, i have a field with Char(6) in the file it looks as follows:
1.23 -> | 1.23 |
10.23 -> |10.23 |
100.23-> |100.23|
I want it to be like this :
1.23 -> | 1.23|
10.23 -> | 10.23|
100.23-> |100.23|
Please let me know ASAP as its a critical issue for the customer.
Warm Regards,
Nilesh Kumar

Hi Nilesh,
if You are using file content conversion on Sender Adapter, then do you java mapping between your two interfaces(sender and receiver)
use java.text methods for formatting the values according to your requirement.
first check the java API 1.4.2....
with in that check java.text.* methods
Also there will be lot of examples availble on internet on this. Check online.
Also check this link this will definitely solve issue
[http://www.iro.umontreal.ca/~vaucher/Java/tutorials/Formatting.html]
Sample code on this link
 double x = 1.0 / 7;
 for (int n = 1; n<5; n++)
 System.out.println( "1/7 : " + format( x, n, -6)
 + format( x, n, 10));
Thanks
Gujjeti
Edited by: Praveen Gujjeti on Apr 16, 2008 6:16 AM

File-Sender: Probl. with Content conversion - Read whole line in singleTag

Hello,
I have a flat file that i read with the sender file adapter.
After content conversion I get not the result i wished to have...
The source flat file looks for example like this:
ABC;DEF;GHIJ
KLM;NOP;Q
RSTU;VW
After the Content Conversion I would like to have this result:
<Recordset>
 <Data>
 <Row>ABC;DEF;GHIJ
 <Row>KLM;NOP;Q
 <Row>RSTU;VW
 <>
What sounds very similar but didnt work for me yesterday.
I defined a data type that looked like this:
DT_TEST (Complex Type)
 Recordset (0..unbounded)
 Data (1)
 Row (type string / 0..unbounded)
During the file content conversion I just did this:
Recordsetname: Recordset
Recordset structure: Data, 1
Data.fieldNames = Row
Data.fieldSeparator = nl
This was also described in blog:
/people/sravya.talanki2/blog/2005/08/16/configuring-generic-sender-file-cc-adapter
But my result is always like this:
<Recordset>
 <Data>
 <Row>ABC;DEF;GHIJ
 </Data>
</Recordset>
<Recordset>
 <Data>
 <Row> KLM;NOP;Q
 </Data>
</Recordset>
<Recordset>
 <Data>
 <Row> RSTU;VW
 </Data>
</Recordset>
.And not like I wished.
Can anybody help me?
Greetings
Tobias

Hi,
I just gone thru the blog and as per the structure defined I have no idea how this works this way.
But if you modify the structure to
RecordSet - occurs 0-1
Data - occurs 0-n
Row - occurs 0-1
And in the Content conversion mentions Data,* instead of Data,1.
In this case you will be getting a output like
<Data>
<Row>ddf,sdfsd,sdf</Row>
</Data>
<Data>
<Row>fff,sdfsd,sdf</Row>
</Data>
You can achieve this but I don't have any idea how to generate that kind of output with the Structure and the conversion parameter mentioned in the blog.
Thanks,
Prakash

Error in Rcvr File Adapter using FTP ?

Hi @,
I am getting the follwoing error while trying to put file in the folder thru Rcvr File Adapter using FTP and it is giving me following error :
java.io.FileNotFoundException :(Permission Denied )
I have verified the permissions on the folder and it is having write permissions.
Please suggest Its urgent.
REgards

hi amit,
can you
1. check whether the access to FTP is Authenticated, if so provide the username and password
2. try giving different file name at the receiver end
3. try normal ftp commands to access the folder
regards
Ramesh P

File to JMS Scenario - Error is Receiver JMS Adapter

Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

I need this file "How to Use the Content Conversion Module in JMS Adapter"

Can someone send me this file:
"How to Use the Content Conversion Module in JMS Adapter"
I am not able to find it.
Thanks
Antonello

pls refer guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
Regards,
Swetha.

File Adapter using NFS

Hi all
I am using the NFS option in File adapter.The file is being placed in C:\TEMP folder and in the directory path i have specified
ipaddress\TEMP but when i watch it in Adapter Monitoring it shows me a error C:\TEMP does not exist.
Please suggest if any settings need to be done.

You need to put the file on application server by TCode SXDA_TOOLS. I guess you are putting the file on your local machine.
First of all into XI goto AL11 and chose one source directory, and give this dierectory name in your CC as it is, no need to put ip address as you have done.
Just see the below example to put the file on application server (XI) directory.
The porcedure to put a file on server is as shown below:
1. Save your file in your local machine.
2. In XI server, enter the tranaction code "SXDA_TOOLS".
3. In the input screen, enter:
i) Object Type "DXPROJECT".
ii) Program Type "BAPI".
iii) Program "CREATE".
4. Press Copy (Ctrl+F5) button.
5. Now, you will get another screen in which you will see 3 blocks called as "Source", "Target" and "Copy with/without conversion".
6. In Source block, choose the radio button "Presentation Server" and then take F4 help to select your source file. (file which you have saved on your local machine)
7. In Target block select the radio button "Application Server", check the box "Remote server" and take F4 help to select your application server.
8. In the same block under "File Type" select "P physical file name" and under "File Name" write the path/directory name which you have mentioned in your communication channel along with the file name.
Example: suppose file name in your Comm Chanel is "demo.xml" and directory path is "/abc/testfiles/XML/", then in step 8 write "/abc/testfiles/XML/demo.xml".
Note: need not to do any thing in 3rd block.
Regards,
Sarvesh

Multiple message through FIle Adapter using XI 2.0

I have scenario to create multiple message using File adapter .My file structure will be like
EMPID     NAME     SKILLS
001     A      ABAP
001     A      XI
002     B      JAVA
Now I want to post first 2 records in one message and last record in other message.
Can we do it in XI 2.0.Any help appreciated

Hi Suraj.
Thank you very mutch for your reply.
Excuse me...my mapping is done for message type and idoc.
My problem is that when the interface start, on the sxmb_moni I see an error like this:
Creating Java mapping com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- Using MappingResolver with context URL //srvsapdev/sapmnt/CX1/SYS/global/xi/mapping/gestione_magazzini/7fa9c9e15a7811dab710f3e3ac10826e/ --- Load of com/sap/xi/tf/_MM_XmlOrderToIdocMapping_.class from //srvsapdev/sapmnt/CX1/SYS/global/xi/mapping/gestione_magazzini/7fa9c9e15a7811dab710f3e3ac10826e failed. --- Class not found: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- java.lang.ClassNotFoundException at RUMappingJava.load(): Could not load class: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ Class not found: com.sap.xi.tf._MM_XmlOrderToIdocMapping_ --- com.sap.aii.ibrun.server.map.MappingRuntimeException: at com.sap.aii.ibrun.server.map.MappingRuntimeException.code_STYLESHEET_OR_CLASS_NOT_FOUND
..where 'gestione_magazzini' is my namespace and 'MM_XmlOrderToIdocMapping' is my message mapping.
Can you help me to undestand the problem?
Thanks,
Gianluca

How to read MS-Excel file by using file Adapter

hi friends,
I have an issue on read Operation by using file Adapter.
It is necessary to read excel file by using file adapter. But in the native format of file adapter there is no option to read excel type of files.
So friends, please help me how to solve this problem?
Thanks in Advance..

See also this post:
Read Excel File Using FileAdapter in SOA 11g
It might help you

Difference in File Adapter Read File as attachment and Use File streaming

Hi all,
As part of our POC we created a File adapter using the option Read file as attachment and File streaming we observed below things
1.When we are taking “Attachment” option in file adapter, Its able to archive, but not supporting to write data to different location(using fileadapter’s write operation.)
2.when WE are taking “ file streaming “ option in the adapter , Its not able to achive, but it writes data to different location(using fileadapter’s write operation.)
Can anyone know is this is a correct behaviour . If yes what is the reason .
Thanks
Phani

Hi all,
As part of our POC we created a File adapter using the option Read file as attachment and File streaming we observed below things
1.When we are taking “Attachment” option in file adapter, Its able to archive, but not supporting to write data to different location(using fileadapter’s write operation.)
2.when WE are taking “ file streaming “ option in the adapter , Its not able to achive, but it writes data to different location(using fileadapter’s write operation.)
Can anyone know is this is a correct behaviour . If yes what is the reason .
Thanks
Phani

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 value2 value3
I want to ignore value 2 but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Error In Receiver BC adapter(EOIO not supported by protocol BC.)

Hi Experts ,
My Scenario is ABAP proxy to SAP BC .I had bellow error in Receiver BC adapter .
Adapter Framework caught exception: Delivery semantics EOIO not supported by protocol BC.
Error Delivering the message to the application using connection BC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.InvalidParamException: Delivery semantics EOIO not supported by protocol BC..
Please help how to resolve this .
Regards
Upendra.V
Edited by: upendra v on Oct 4, 2010 2:08 PM

HI Anuradha,
Check the below link for receiver mail configuration and follow the steps accordingly.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
Regards,
Naveen

File Adapter or File Transport which one will give more performance

Hi all,
File Adapter or File Transport which one will give more performance ? in OSB?
Which one to select any one did performance analysis?
Thanks
Phani

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

Upload file without using file upload UI Element

Hi all.
I need upload a .txt file without using file upload UI Element because filename is not insert by user. The filename is generated by program. I try to use 'GUI_UPLOAD' and 'WS_UPLOAD' but don't work.
Many thanks in advance.

As you correctly pointed out we cannot use the gui_upload and gui_download fm's in webdynpro because they require sap gui and WD Components generally run in a HTML or Portal environment.
The only option available is File Upload Element

PI 7.1 receiver SOAP adapter using https

Hi all,
In PI 7.1 receiver SOAP adapter using https, what are the configurations necessary in PI box?
Certification, and key store values, security etc etc
-Michael.

>
Michael Johnson wrote:
> I did n't find anything related to 7.1 version
Some leads are provided by help: http://help.sap.com/saphelp_nwpi71/helpdata/EN/56/992d4142badb2be10000000a1550b0/frameset.htm
Regards,
Abhishek.

Error in Receiver File adapter using File content Conversion

Similar Messages

Maybe you are looking for