File lock in MAC mini server

Normally when users opening a CAD file from MAC mini server, when other user open the same CAD file it will show “read only” and can’t be save. But one of the computer did not show read only messing when someone using the same CAD file. This computer able to open & save file, however the saved files may be missing in the server. Is there any wrong in the mac mini server ?

Well, I don't know the answer really, if you don't get some good help here, it might pay to repost in the Server area...
https://discussions.apple.com/community/servers_enterprise_software/os_x_server
Or I can ask this one be moved if you like.

Similar Messages

Troubles with File sharing on Mac Mini Server

Hi
Experience crash behavior of 10.6 server on my Mac Mini with DataBox connected containing all kind of data, except the system software which is installed on the internal hard drive. All my shared volumes, about 10, generating more or less regular (about every 30 minutes) the server preferences to crash.
The two entries in the console log are always to same for all shared volumes I have:
19.02.10 00:07:18 Server Preferences53715 XSActionManager: Removing queued action (Zugriffsrechte lesen) due to coalescing (readSettingspath/Volumes/DataBox 2/Dumy)
19.02.10 00:07:18 Server Preferences53715 The shared folder 'Dumy' has custom file system ACLs which cannot be displayed. Editing the permissions may replace any custom ACLs.
Once a day, the console log shows for all services running on the server:
19.02.10 05:37:17 Server Preferences53715 Error: The server 'Dumy.com' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_accounts'. Error: Error Domain=XSActionErrorDomain Code=408 UserInfo=0x107e2c650 "A network error occurred"
Did anybody have a good idea how to overcome this and how to decode the "UserInfo=0x107e2c650"
Thanks for taking care.
Thomas

If I understand your question correctly, is there a reason you've replaced the integrated MySQL within Mac OS X Server with a second MySQL database implementation? (That's almost inherently going to get tangled; you'll need to shut off the default implementation.)
Or is this a Perl module you've loaded and that is now tipping over? If you haven't replaced MySQL here, then have you started MySQL and run some tests with the database itself? This to make sure MySQL is operational, and that the problem you're working on is in the Perl pieces and not in the MySQL layer?

Mac mini server on two different location

Hi,
With my partner we are working on very havy image file from two different location. we wont to be able to share those file to each other easly and quickly mad make sur those file are allways up to date.
- My first idea was to install in my place one mac mini server with external hard drive (RAID 0) and install the same server in my partner place. then I would like to create a VPN connexion between both Mac Mini server and setup a kind of RAID 1 between then. link that if my partner modify an image file on the server, With a short delay I will be able to see it on my side. this solution would be the best for me as all the data would be save in two different location and I would not have any backup issue.
I did not buy the MAC mini server yet but as soon that I know the best soluiton and that it is possilbe to do so I will buy it.
- My second idea (if the first one is not possible or if you guy's convins me that my idea is stupide) would be to have one MAC Mini server in one location setup with an external hard drive in RAID 01. my partner will need to connect to this server through VPN. This solution seems to be a good option but my partner will need to copy the file in local to work on it (few Gb eatch file) and copy it back on the server when he finish to work on it.
With this solution I will also need to organise manual backup through another hard drive to avoid to have all our data in the same location.
Witch one of those solution seems the best and can work with MAC mini server? If you have another idea for my situation I m more then happy to read it.
Knowing that other user may need to access to my file, is the MAC Mini server VPN connection safe and fast?
Thank you in advance for your help.
Chris.

The fact that you are both working on multi-gigabyte
files, the statement BDAqua made about network speed
is a big issue. Small incremental changes in a single
multi-gigabyte file still require that entire file to be transferred.
There in lies the big issue with network speeds.
Basically, it seems idea 1 will probably not work well and
besides, RAID is for local drives and not for over networks.
One solution to the synchronization issue is have a single
computer that has the application and the data and log into
it and work remotely. However, it sounds like these are image
files and working and any kind of graphics over a remote
connection is problematic unless there is a very high speed
network connection.
Second idea is the simple solution. As for the backup, that
can be automated with backup software and the backup could be
put any where.

How can I set-up my mac mini server to be a central file server for my windows boxes (they don't see the mac on the network), and how do I set-up a central iTunes server so that all my devices sync to the mac mini?

I am looking for step by step instructions to configure my mac mini server to support the following:
1. Central itunes server for all my devices (ipad, ipod, iphone, etc.)
2. Central file server so that my windows devices can save and retrieve data from the central system (the mac does not show up in the network for the windows systems - all running windows XP or 7)
Thanks,
Keith

You will need to enable file sharing in System Preferences
as well as setting up sharing and permissions for the
directories that you want shared. You may also want to
setup a non-administrative user or allow limited guest
access. The user would require entering a user name and
password to make the connection, but would allow remotes
to change files, if set up tat way.
As for serving iTunes media, better to post in the iTunes forum.

How do I set up my Mac mini to read iTunes and iPhoto files from my new Mac mini server?

Want my old Mac mini to read iPhoto and iTunes files from my new Mac mini server. Old Mac has no more room to store files. How do I do this?

Hello,
Have you tried enabling iTunes Sharing & iPhoto Sharing on the Server?
Or maybe...
http://support.apple.com/kb/ht1449
http://www.apple.com/itunes/inside-itunes/2011/02/how-to-move-your-itunes-librar y-to-another-hard-drive.html
http://support.apple.com/kb/PH2506
http://support.apple.com/kb/ht1229

Mac mini Server 10.6 unable to search for files on the server from desktop.

I'm running Mac mini Server 10.6 with 15 various Apple Mac desktops 10.4 / 10.6. The problem i'm having is that i'm unable to search for files on the server from any of the desktops. I have fixed permissions and rebooted. I can perfomr a search though command - F and spotlight from the server.
Anyone have any ideas?

I have a Mac mini server with Mac osx 10.6.8 installed --- I have a website {UNDER CONSTRUCTION} installed on it with a REGISTERED DOMAIN NAME belizeansworldwide.com -->[DNS service w/GoDaddy] & DSL INTERNET service w/VERIZON --- {My server is the ONLY DEVICE CONNECTED to my VERIZON DSL router/modem}
When I enter my DOMAIN NAME or WAN IP # in my browser(s)--> Chrome OR Safari -- i get my Verizon modem
set-up page-->{this incl the WAN IP# as I expected}----{NORMALLY I WOULD ACCESS MY Actiontec
modem/router via 192.168.1.1} --- While in that webpage there's an option "shared files/folders" & clicking on that option DISPLAYS MY WEBSITE ---> {"PORT FORWARDING DID NOT RESOLVE THAT"}
My next attempt @ a solution was through my Server's SystemPreference>Sharing>Internet Sharing
& this the Original Object of my post ===> "MY SHARING PANEL DOES NOT INCLUDE THE OPTION
FOR 'Internet Sharing' among the others like CD DVD, Remote Login,Remote Management, Bluetooth Sharing, etc.etc ---- Hope this additional info will help to clarify &/or explain my problem
Thanks, & best regards to you & yours

Use Thunderbolt cable to transfer files from a mac to a Mac Mini Server

I want to transfer a large document folder of files from a MacBook Pro (MBP) to a Mac Mini Server (MMS) using Thunderbolt-to-Thunderbolt cable. How?
Currently both the MBP and MMS are on the same Wireless-N network.
Obviously the Mac Mini Server cannot be booted in Target-Drive mode because there are other users using it as a server.
Both computers installed OS X Mavericks 10.9.1.

Update:
Thunderbolt Bridge is the ultimate solution (on OS X Mavericks 10.9.1). It gives amazing speed transferring files without downtime on the source and target computers (in my case the MacBook Pro and the Mac Mini Server). Up to 7 times faster in writing and 30 times faster in reading than Wireless N!
My Settings: Systems Preferences > Network > Set Service Order ... and drag the Thunderbolt Bridge as the top Service (and thus above Ethernet and Wi-Fi), click OK and Apply. I only set it on the source computer (MacBook Pro) but you may try to set both.
Then connect the two computers with the Thunderbolt-to-Thunderbolt Cable and wait for about 15 seconds till they get the Self-Assigned IP addresses. From the Network Preferences page, you'll see the Thunderbolt Bridge rises to the top on BOTH computers. (The button remains amber, not green. It's okay.) Then you can start file transfer from the source computer (e.g. using Finder or an app such as TuneSpan to locate the target location on the target computer).
To play save, I use BlackMagic to test the connection speed before starting the real transfer. I found that sometimes I don't need to turn off the WiFi on the source computer (MacBook Pro) but turning WiFi off on the source computer gives me a peace in mind.
See what I got:
From the Thunderbolt Bridge:
From WiFi using Airport Time Capsule 802.11ac on Wireless-N:
Note: After you finished the file transfer, Turn back on the Wi-Fi and Eject the target folder from the source computer before unplugging the Thunderbolt-to-Thunderbolt cable.

Help Setting up Mac Mini Server for Printer/File Sharing to Windows comp.

Hi, so in our office, we decided only to switch half of the office to macs for budgetary reasons. We purchased the mac mini server to replace the 5,000 year old one and have also gotten to macbooks and a mac mini. My other two co-workers unfortunately still are using two windows vista machines. We have important documents on the server hard drive and they also need our OLD ACT! database to access from it and I have not been able to get them to access the hard drive. Can someone please walk me through these steps? Also, ideally we want to be able to access this servers hard drive when we are out of the office and edit word documents and such, but I also have not been able to do that or make that work. Any help in these areas would be greatly appreciated!

If you use a different login name for the network account to your existing local account then the local account will not be affected. You might want to transfer the contents of your existing local account to the new network account. To do this you could try the following
Create new network account
Login using old local account
Now while logged in using old local account - connect to the File Server
Enter the new login details
It should hopefully list the Share that stores your new network account, complete the connection
You should now have the Share mounted, copy the contents of your local account to the corresponding location in your new network account
Note: The Library folder in your home directory contains all your settings
Once complete logout of the old local account
Try logging in to the new account
In terms of limitations, it is going to be slower than a local account because it has to go across the network, and some badly written applications may have some issues but most will be fine.
At this stage your local account has not yet been deleted so if you have problems you can revert to it.

Easiest way to move files to Mac Mini server

I'm moving GIGs of files over to my mac mini server from my MBP. Right now it says its going to take 140 hours to move my iPhoto library over. Is their a faster way to connect to the Mac Mini Server other then ethernet? Right now my MBP is wired to my verizon router/switch and my server is wired to the router/switch. Can I put a firewire directly from the server to my MBP? Will that work?

Can I put a firewire directly from the server to my MBP? Will that work?
Yes, it should. So should the suggested ethernet cable between the two directly.
Transferring files between two computers using FireWire
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8443.html
Connecting two computers using Ethernet
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8429.html
Dah•veed

Want to upgrade to Maverick 10.9 from 10.8.5 Mac Mini Server

I have a 2012 Mac Mini server running 10.8.5 with 2 - 1 TB drives. Sadly I have not really set up my server with anything really important. I was hoping to do a fresh install of 10.9 and then be selectve as to what I re-install including a fresh install of the server app. Then I can take my time getting it set up properly. In the past I remember having an issue with permissions I had set on some external drives from an older MAC. Can't remember all the details but if I remember correctly it kept telling me that I did not have permission to access MY files. A real PIA. What should I do to prevent this from happening unless I am remembering the issue incorrectly? Looks like the update is free but the server app is not, correct?
I just want to start fresh without locking myself out of my external DROBO drives where my pictures, music and videos reside.
Any tips or help would be appreciated.
Thanks
-Zack

Download the Mavericks installer (make a copy now, as installation will delete it), and follow this sequence to make an external bootable installer. Purchase and download Server.app version 3. Get the local DNS server configured and working first. Don't use .local as your top-level domain, and preferably use a real and registered domain that you've registered or have permission to use, or a subdomain of a real and registered domain that you have registered or have permission to use.
As for managing the file ownerships and protections on external devices, that's usually done voa chmod and chown commands (and chmod -R and chown -R) at the command line, or via the Get Info command via the GUI. Usually setting yourself as the owner of the objects is typically enough.

Website on Mac Mini Server not accessible. Error 403 index document not available.

Dear all,
I'm trying to host a website on my Mac Mini Server. As far as I can see, my DNS is working correctly. Also my firewall is setup correctly. (I'm hosting another website which works OK). But I setup a new site. Basically a copy of the working site. But this site doesn't reflect an index.htm page. I receive an Error 403 with further information that there is no index document or that the site is secured. There is a contact link on this page directing to my webmaster. So I conclude that something is working, but no index.htm page. Has anyone similar experience? And offcourse a solution?
Many thanks.

Launch Terminal.app and issue the commands:
cd /Library/Webserver/Documents/
ls -al
And see if the files are readable by the web server. Here's an example index file listing that's owned by root and with group access for admin folks, and this file is marked as readable and writable for the owner and the group, and is readable for everybody else:
-rw-rw-r-- 1 root admin 5094 Jul 25 2009 index.html
In this configuration, the web server would be using the other access; the web server can read this file, but not write to it. Here is how to duplicate these ownership and access settings on your own index.html file, assuming that you have that file present in the ls listing above, and assuming that you have issued the cd (change default directory) command shown above:
sudo chown root:admin index.html
sudo chmod ug=rw,o=r index.html
You will need to enter your administrative password for the sudo command.
I would very strongly suggest that you start learning some basics of bash and of Apache, because you're going to be needing those skills very soon.

How to set up my mac mini server to use two drives seamlessly?

I have a mid 2010 mac mini server, with OSX Lion installed. It has dual 500gb hard drives.
I've been moving all my important files to it, and I've always assumed that once I filled one disc, it would seamlessly transfer over to the other and continue backing up. This does not seem to be the case.
I'm at roughly 495gb of data, and when I try to move a 10gb file onto my server, it tells me that I don't have enough disc space to continue the operation.
What can I do to make use of both drives?
-Thanks

It sounds like what you're asking for is to have the two drives in a RAID 0, where the two 500 Gb drives look like a single 1 Tb drive. I'm not sure the exact procedure for installing RAID 0 on a mini's internal drives, but the process would involve backing up, reconfiguring for RAID (which destroys all data,) restoring data from the backup, and more risk than I would personally find acceptable. I'd expect to lose a full day with the backup and restore steps. I can guarantee, there will be pain.
Instead, I'd suggest looking at what's consuming the 500Gb, and seeing if there are particular folders that can be moved. For example, a shared folder is pretty easy. Copy it over. In file sharing setup, edit the share to point to the new location. Make sure remote users disconnect, and reconnect to the "new" share. When you're happy there is no data loss, delete the old location.
User's home directories can also move, but the process has a few more steps, and depends on how the accounts are built (local vs. OD)
If the majority of the data is in a single "your backup files" folder, shared or otherwise, then I would just set up a second folder on the second drive and write to it, leaving the first alone. If it is truly a backup, then you could make the first folder read-only at this point for extra protection. If you go the 2 folder route, keep in mind your boot drive is operating with 1% free space, I like my drives to have at least 15% free, and OS drives more like 25% (you'll find some range in recommended %-free, but most will agree 1% is too little) so move SOME stuff to the new folder, before closing the old.

Please help me decide on a Mac mini server or MacBook Pro i7 for Logic

Hi folks,
I've really taxed my brain trying to figure out what's the smartest way to go. I'd love to know what any of you think I should do.
My current setup:
2007 MacBook Pro 2.33 GHz Core 2 Duo
2GB Ram
FSB 667 MHz
M-Audio ProFire 610
WD-Passport external drive for samples and audio files
Logic 8 (looking to upgrade to 9)
Record 1.5
Various AU plugins including Omnisphere, Miroslav Philharmonic, Amplitude 2, FM-8, BFD 2 and Korg Legacy Analogue
Final Cut Studio (latest version) for modest HD editing but sometimes multiclips as well
I tend to use lots of tracks - around 10 vocals, 4 guitars and lots of software instruments.
As you can imagine, Omnisphere runs like a dog past 2 instances and BFD practically makes everything grind to a halt.
Since going to Record 1.5, rewiring also seems to be unusably slow.
I'd love a new iMac or Mac Pro but I make several plane journeys to visit my Mum in another country. My solution has to be mobile, although I have got monitors, a keyboard and mouse that I can use at my Mum's.
As far as I can see, there are 2 options:
1
A new MacBook Pro 2.66 Ghz i7
2
A Mac Mini Server 2.66 Ghz Core 2 Duo
Physically, the Mac Mini is the better option:
- much lighter in my hand luggage so I could take it in addition to my existing MacBook Pro.
- more USB ports
My worries with getting a Mac Mini are:
- Is it powerful enough or at least significantly better than my MacBook Pro?
- Will it run the latest version of Final Cut Studio (a little off-topic, I know but I couldn't seem to find any straight answers elsewhere).
- Is it noisy when under a heavy workload?
- There is no Superdrive so can I use my MacBook Pro to install the software DVDs across a network?
Thanks for reading this. Let me know what you think.
Kind regards,
Steve

The mini will be about as powerful as your current MBP. You could have more RAM in the mini, 2 GB is certainly not enough for any serious work.
People on this list were initially(LP 9.0.0) underwhelmed by the MBP i7 dual core, it is a step up from your older MBP, but don't expect miracles. Get lots of RAM/a SSD for optimum performance.
9.1.3 may have improved performance, not sure,
Fast and relatively cheap: iMac i7 quad core. Not very portable, though.
Not ideal either is your M-audio interface, its drivers are below par making your Mac sweat more than necessary.
My 2c,
Zip

RAID on Mac mini Server (2011 i7)

I just purchased a new Mac mini Server today (the base configuration 2011 Quad Core i7 with 4GB RAM and 2x 500GB 7200RPM magnetic hard disks) and wanted to share what I've learned about setting up RAID on the system.
First, as you may have heard, the Mac mini Server does not include any installation/reinstallation media (I was hoping for a USB reinstall key, but it seems that the new systems don't include these or optical discs; last year's Mac mini Server included handy reinstall DVDs even though the system didn't have an optical drive). Out of the box, the new Mac mini Server has Mac OS X Lion, the iLife suite, and the Mac OS X Lion Server tools pre-installed on one of the two 500GB internal drives; the other disk is formatted as a separate, second drive.
If this is the configuration you're looking for, you're good to go right out of the box. As an aside, this shipping configuration is ideal for using the second disk as a Time Machine drive. I would argue that Time Machine would be a better use of the second volume than a RAID 1 configuration, as Time Machine provides versioned backups and you don't incur the write performance penalty RAID 1 requires every time data is saved to the disk. I would further caution that, while an internal Time Machine disk is a convenient safety measure, any critical data should be backed up outside of the system as well.
Now for those like me who were intrigued by the opportunity to mate the Quad Core i7 with a RAID 0/striped configuration for a performance boost (or if you want to use RAID 1), a RAID configuration is possible, but it there are a few caveats.
First, Apple has two recovery options for the new Macs: a small hidden recovery partition on the boot drive and their Internet Recovery system. While it's possible to boot other systems from a Lion installation DVD extracted from the App Store Lion installer, such bootable optical discs will not boot the Mac mini Server at this time (this may change if Apple modifies the App Store Lion installer). Therefore, as of right now, the recovery partition or the Internet Recovery system are the best options for installing/reinstalling on a RAID set.
Second, if you boot the system using Command+R to access the recovery partition, you can wipe the two drives and create a RAID set, but this process will remove the recovery partition and is incompatible with FileVault encryption (a warning to this effect comes up when you try to start an install/reinstalll on a RAID set, but at that point, you've likely already erased the recovery partition in Disk Utility). If the system boots after the recovery partition is deleted, the only install/reinstall option is Apple's Internet Recovery.
Third, as might be expected depending upon your internet bandwidth, the Internet Recovery system can take a while to boot the recovery tools (10-15 minutes to boot on a standard cable modem connection) and to reinstall the OS (50+ minutes on a standard cable modem connection). Internet Recovery currently reinstalls only Mac OS X Lion and the Server tools on the mini Server; there's no option to install iLife during the OS install (Apple could always change this by updating their servers, and there is a Customize button on the installer, but it is greyed out and cannot be clicked at the present).
Fourth, once the OS is reinstalled, it's possible to reinstall the iLife applications by launching the App Store from within Mac OS and selecting Purchased. The store will indicate that the system is eligible to download the iLife apps and you can do so by agreeing to upload system-identifying information to Apple and signing in with your Apple ID.
I hope all this helps. Here's a more concise step-by-step of how to set up the system with RAID:
THINGS YOU NEED
A fast Internet connection for the mini
Patience
Hold Command+R on the keyboard at start up to boot from the system's recovery partition (if the recovery partition has been deleted, the system should start from Apple's Internet Recovery system; you may need to connect to WiFi if wired ethernet isn't available)
Once you get into the recovery utility, select Disk Utility and for each of the two hard drives:
highlight the drive
select the Partition tab
select 1 Partition from the Partition Layout pulldown menu
select Free Space from the Format pulldown menu
click Apply
After you've wiped both of the drives, highlight one of the disks and click the RAID tab, then create a RAID set (striped or mirrored, as you prefer)
Quit Disk Utility and from the main recovery utility menu select Reinstall Lion (from this point on, if you have any trouble, you can restart the mini from the Internet Recovery system and return to this point, but the recovery partition will be gone as long as you keep the RAID set)
After you install and configure Mac OS X Lion Server (which can take well over an hour to download and install), you should be able to reinstall the iLife applications by launching the App Store App and selecting Purchased, then logging in with your Apple ID and agreeing to send your system info to Apple to download the iLife Applications
If you're using the mini as a production server, I highly suggest setting up some local, external recovery tool, as you don't want to have system downtime protracted by having to wait for an Internet Recovery boot/reinstall. I would also beg Apple to consider this sort of scenario and to provide more supported methods for recovering and reinstalling from local media.
Best of luck to you all.

I found the basic principle on another forum thanks to a guy called 'e-whizz' and this what I did to make RAID 1 work on a mac mini server with LION server.
You can easily configure the second drive on a mac mini server for a Mirrored RAID 1 set with Lion Server without either reinstalling or erasing your existing setup.
The initial setup process takes about 30 minutes, though the rebuilding of the mirror disk will take several hours, depending on the amount of data you have on the drive. It took around 3 hours on a new mac mini server with lion server installed, nothing else configured.
Before you start, please ensure you have a current backup of the server. Getting the following commands wrong can render you server unusable.
What you need to use is the command line version of Disk Utility, diskutil.
Before you start, clone the hard drive. You can use SuperDuper (or similar, I have used SuperDuper) with copying all files onto a USB memory stick. If Lion is freshly installed, 8Gb will do. SuperDuper will create a bootable copy on the USB.
Boot the mac mini from the external USB. To do that, reboot and hold down the option key while restarting. You will see a window, select the USB drive to boot from.
Launch the terminal and type the following command:
diskutil list
This gives you a list of all the drives and partitions your system knows about.
You need to find the Server HD partition (the first disk) and the HD2 partitions (the second disk). These are the two main ~500GB drives. You will be using the disk IDENTIFIERs when issuing the diskutil commands. For a stock standard Mac Mini Server, the commands below are correct, but if you have previously changed the volume names, or repartitioned at any stage the disk identifiers and volume names may differ.
First enable RAID mirroring on existing Server HD volume. This will create a single disk, unpaired mirror, without affecting your data.
Using this syntax:
diskutil appleRAID enable mirror disktomirror
where disktomirror is your disk identifier for Server HD
On my mac mini server, Server HD was disk0s2, so I used this command:
diskutil appleRAID enable mirror disk0s2
You now need to run diskutil list again to see the disk identifier for the new RAID volume. The new RAID volume will be listed as disk# on its own at the bottom of the list.
On my mac mini server this was disk3 (disk 2 was the USB I booted from, disk 0 the first disk and disk 1 the second disk)
Next add the disk HD2 to the Server HD raid mirror volume (on my mac, as I said before, this is disk3) as a new member.
This step will erase disk HD2 and begin an auto repair of the Server HD.
Using this syntax:
diskutil appleRAID add member newdisk raidvolume
replacing newdisk and raidvolume with your particular disk identifiers
On my server this was:
diskutil appleRAID add member disk1s2 disk3
To follow the progress of rebuilding the mirror set, type
diskutil list
It will show you the progress in % of the rebuilding under status
Once finished, reboot and your RAID 1 is up and running and you have also a working backup on your USB (coz' that's where you booted from ;-)
After reboot you can check the status of your RAID with
diskutil appleRAID list
Both drives should show ONLINE under status, interestingly, the device node for the RAID changed on my mac mini server from disk3 to disk2
That's it

FileMaker Server problem on Mac Mini Server - Mac Mini won't boot

I just installed a brand new Mac Mini Server today, and also FileMaker Server 11. A first-timer for both Mac OS X Server and FileMaker Server, I made an error as explained below, and right now I don't know how to get back on track with the system. It won't boot.
So, how did this happen?
At first everything was proceeding according to plan. I configured the pre-installed Mac OS X Server on the Mac Mini with users, groups and services. This was tested from clients and this seemed to work just fine. Then I installed and configured FileMaker Server. This was also tested from a client, and the example database that came with FMS was served up just fine.
The problem arose when I tried to install my existing FileMaker databases. I simply checked to see where in the file system the example database was located, and then copied my old databases to that location (I think it was Library > FileMaker Server > Data > Databases or something close to it - can't check it now...). I had the FileMaker Server Admin Console running, and hit the Refresh button hoping that this would make FileMaker Server find the databases.
This was my first error. I should have read ahead in the instructions to see that one is supposed to use an Upload Database assistant instead...
What happened when I hit refresh was that the FileMaker Server Admin Console became completely unresponsive with a spinning ball as cursor. I left it for about an hour hoping it would terminate, but gave up and tried to shut it down. It wouldn't close, so I force quit it from the Finder. Then I tried to shut down FileMaker Server, but I needed to force quit this as well. After this I thought it would be best to reboot the Mac Mini, so I shut it down, but now it won't even boot, it just stays on the screen with the spinning wheel for ever!
I have tried all the keyboard options while booting, but nothing seems to help. In safe mode, the grey progress bar just grows to about one third, then disappears and leaves the eternally spinning wheel.
The server version of the Mac Mini doesn't have an optical drive, only two internal hard drives. I tried to reinstall from scratch using the optical drive on another Mac on the network. The startup disk appeared when I tried to boot the Mac Mini holding down the option key, and after about 20 minutes or so of the spinning wheel I could actually access the discs. I started by running Disk Utility to check disk permissions. There were a lot of repairs concerning permissions and groups, especially on "Library". It said "ACL differs on Library", I don't know what this is but this was repaired. I then ran Repair Disk. The volume appeared to be OK.
When I tried to reinstall Mac OS X Server however, this failed with the message
"You can't upgrade this version of Mac OS X because a newer version is installed. Mac OS X Server couldn't be installed on this disk." I don't know how this can be, but I may have run software update earlier today.
What should I try next? Should I erase the primary HD and try to install again? Or should I install the system software on the secondary HD? Or should I just try to reboot as is in the hope that the disk permission repairs did the trick...?
Any helpful pointers would be greatly appreciated!

Hello there, I came across your post when browsing the forum for passive advice. I am in the same boat as you and am a first timer for both of these tools. I work for a company who now needs to expand its network and database capabilities. I have been assigned this task and these are the tools i have opted for. I have not yet purchased them and i am pleased to find someone who has my desired setup. Could you please advise on the simplicity of the setup and whether an advanced knowledge is required.
I want to use it in a mixed operating system environment. Is this possible?
Regards
Matthew

File lock in MAC mini server

Similar Messages

Maybe you are looking for