Mac mini server on two different location

Hi,
With my partner we are working on very havy image file from two different location. we wont to be able to share those file to each other easly and quickly mad make sur those file are allways up to date.
- My first idea was to install in my place one mac mini server with external hard drive (RAID 0) and install the same server in my partner place. then I would like to create a VPN connexion between both Mac Mini server and setup a kind of RAID 1 between then. link that if my partner modify an image file on the server, With a short delay I will be able to see it on my side. this solution would be the best for me as all the data would be save in two different location and I would not have any backup issue.
I did not buy the MAC mini server yet but as soon that I know the best soluiton and that it is possilbe to do so I will buy it.
- My second idea (if the first one is not possible or if you guy's convins me that my idea is stupide) would be to have one MAC Mini server in one location setup with an external hard drive in RAID 01. my partner will need to connect to this server through VPN. This solution seems to be a good option but my partner will need to copy the file in local to work on it (few Gb eatch file) and copy it back on the server when he finish to work on it.
With this solution I will also need to organise manual backup through another hard drive to avoid to have all our data in the same location.
Witch one of those solution seems the best and can work with MAC mini server? If you have another idea for my situation I m more then happy to read it.
Knowing that other user may need to access to my file, is the MAC Mini server VPN connection safe and fast?
Thank you in advance for your help.
Chris.

The fact that you are both working on multi-gigabyte
files, the statement BDAqua made about network speed
is a big issue.  Small incremental changes in a single
multi-gigabyte file still require that entire file to be transferred.
There in lies the big issue with network speeds.
Basically, it seems idea 1 will probably not work well and
besides, RAID is for local drives and not for over networks.
One solution to the synchronization issue is have a single
computer that has the application and the data and log into
it and work remotely.  However, it sounds like these are image
files and working and any kind of graphics over a remote
connection is problematic unless there is a very high speed
network connection.
Second idea is the simple solution.  As for the backup, that
can be automated with backup software and the backup could be
put any where.

Similar Messages

  • Can I use one TimeCapsule to backup two Macs that are in two different locations.

    Hello, I have one mac on a recording studio and one macBook pro. Is it possible to use the sametime capsule to backup the Mac in the studio, by bringing the time capsule in the studio, for let say, one week. Then the next week take the time capsule at home to backup my own MacBookPro, and so on... ?
    I know it's a basic question, but I can't find a clear answer...
    Thanks.

    It's possible, but the fact that it is possible does not imply that it would be practical.
    You will have to completely re-configure the Time Capsule each time that you change locations, because you are changing networks.
    It would be much, much easier to simply add a hard drive at home and backup the Mac to that drive.

  • Mac Mini Server with two displays

    I am about to purchase the new MMS, but I want to clarify two things first.
    I just got off the phone with Apple Customer Service. I asked them, if it's possible to connect two displays, one via Thunderbolt, the other via mini port at full 2500x1440 res. The guy said, it's possible with two Thunderbolt displays, however, he seemed not to sure about it. Further, he couldn't say anything about the possibility of connecting one Thunderbolt and an older Cinema display at full res.
    Does anybody know?
    Thanks!

    I'm not sure about the full res on HDMI. They always had the dual link adapter for the mini display port, not sure how this HDMI one will work out. Maybe they'll offer a special adapter in time?
    You can see the available ports here: http://www.apple.com/macmini/design.html
    and tech info here: http://www.apple.com/macmini/specs.html

  • New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

    New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

    I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
    Thanks for your prompt response,
    Dick Deaton

  • Fresh headless install of Lion (client) on Mac Mini (Server)

    All,
    I have a Mac Mini (Server) with two internal drives.  I have successfully been running Lion (client) headless (no monitor or keyboard) for some time since I had originally 10.6 installed and upgraded to 10.7 using the Mac App Store.  For backup I nightly clone my primary internal drive to the secondary drive using SuperDuper.
    I'm having a problem with my Lion install which means that I want to do a fresh install.  I'm stuck as to how to do this.  I've tried:
    1. Boot from primary disk; run Install Lion app; system reboots, freshly installs the O/S, with Screen Sharing on but doesn't wipe the disk, leaving the problem that I'm trying to get rid off.
    2. Boot from the secondary disk; format the primary disk and do a fresh install on the primary disk.  However this doesn't work as once the install is underway and it's re-booted onto the primary disk screen sharing is disabled and so I can't see what's going on.
    (I know that it's possible to use screen sharing during a server install with no username and the first eight characters of the serial number - but this doesn't work with the Lion client installs.)
    Anybody with any ideas?
    Thanks in advance - Jonathan.

    Here's what I would do. It might be handy to run a keyboard and monitor to the Mini at least during this process.
    Reboot into the Recovery partition. Once in, launch Disk Utility. Wipe your boot volume and repartion. Create single partition called 'Server HD'. Now, quit Disk Utility and select the option to reinstall Lion. Install it on your new partition.
    This should work just fine for you.

  • Setting up RAID on a Mac Mini Server

    I just bought a new Mac Mini server with two 750GB drives. I'd like to use the RAID utility to set them up in a RAID 1 array so I have 1 logical 1.5TB drive. However, the utility won't allow me to drag the primary drive into a configuration. I assume this is because it's the boot drive.
    Is there any way to do what I'm trying to do?
    Thanks!
    David

    David,
    Does it allow it if you boot to the Restore Partition with CMD+r ?
    If not,do you have an external drive to Restore to & boot from?

  • Can I install SSD and HDD on mac mini server?

    hi. I want to buy a new mac mini server with two hdd. can I replace one hdd on my ssd and leave second hdd for files? And can I install OSX on my ssd and windows on my second hdd (divide it into 2 parts... for bootcamp and file storage)? thanks

    AGStudio.pro 
    as I know, it is impossibe to install ssd and hdd in this model
    Thats incorrect, who told you that?    Ive installed a second 7mm drive in several Mac Minis and own 2 myself.  Typing on same now.
    (you can put in a second 9.5mm drive rather than a 7mm drive, however it takes nimble fingers unless you want to completely remove the dual drive caddy from inside the mac Mini)
    see youtube video on installing second drive in the Mini
    http://www.youtube.com/watch?v=mnrhin2ed8E
    AGStudio.pro 
       I don't need a server.
    Then you dont need the mac mini server.    All you need is a standard mac mini.
    The mac mini server is EXACTLY THE SAME as the standard Mac mini quad core mini,....except with a second drive and Server software.
    All current Mac Mini have a dual slot for a SECOND DRIVE

  • If have two different Mac mini at two different locations. Both are running Lion. Connecting my iPhone 4G

    Hello,
    I have two different Mac Mini at two different locations. Both systems are running Lion.
    One of the Mac Mini systems connected to my iphone G4 as well as Ipad 64-Wifi, work perfect to sunchronise. ( IO5 is present)
    I would like to run the changes i made with cloud to the other Mac mini system, but this doesn't work.
    Any one to help me?
    Tnx Hans

    Winston, CH.
    Tnx for the fast reply, but where do i find the setting for iCloud system preferences?

  • How to set up my mac mini server to use two drives seamlessly?

    I have a mid 2010 mac mini server, with OSX Lion installed. It has dual 500gb hard drives.
    I've been moving all my important files to it, and I've always assumed that once I filled one disc, it would seamlessly transfer over to the other and continue backing up. This does not seem to be the case.
    I'm at roughly 495gb of data, and when I try to move a 10gb file onto my server, it tells me that I don't have enough disc space to continue the operation.
    What can I do to make use of both drives?
    -Thanks

    It sounds like what you're asking for is to have the two drives in a RAID 0, where the two 500 Gb drives look like a single 1 Tb drive. I'm not sure the exact procedure for installing RAID 0 on a mini's internal drives, but the process would involve backing up, reconfiguring for RAID (which destroys all data,) restoring data from the backup, and more risk than I would personally find acceptable. I'd expect to lose a full day with the backup and restore steps. I can guarantee, there will be pain.
    Instead, I'd suggest looking at what's consuming the 500Gb, and seeing if there are particular folders that can be moved. For example, a shared folder is pretty easy. Copy it over. In file sharing setup, edit the share to point to the new location. Make sure remote users disconnect, and reconnect to the "new" share. When you're happy there is no data loss, delete the old location.
    User's home directories can also move, but the process has a few more steps, and depends on how the accounts are built (local vs. OD)
    If the majority of the data is in a single "your backup files" folder, shared or otherwise, then I would just set up a second folder on the second drive and write to it, leaving the first alone. If it is truly a backup, then you could make the first folder read-only at this point for extra protection. If you go the 2 folder route, keep in mind your boot drive is operating with 1% free space, I like my drives to have at least 15% free, and OS drives more like 25% (you'll find some range in recommended %-free, but most will agree 1% is too little) so move SOME stuff to the new folder, before closing the old.

  • Is the mac mini server the same hardware as the other mac minis (except for the quad core i7 and dual hard drives) with different software or is it configured differently?

    I have a mac mini with an i7 dual core processor. It is perceptably slower than my macbook pro with a quad core i7. Does the mac mini server have the same hardware configuation as the regular mac mini with server software or is the hardware different (aside from the i7 quad core and dual hard drives)? I want a mini with a quad core i7...

    Your assumption is correct.  The server does however only
    have the Intel HD3000 graphics like the base model with
    no option, at this time, for the discrete graphics chip.  So,
    depending on what you are using it for, that could be a deal
    breaker.  Remember that your MBP does have a discrete
    graphics chip.
    I have a 2011 Mini Server connected to a Thunderbolt display
    that gets used as an engineering workstation and general
    personal use (some photo editing, LP restoraton, general
    internet browsing).  You simply just not enable any of the
    server services.  I find the combination to work quite well
    for my purposes.  I also have a 13" 2.7 GHz i7 Macbook Pro
    which is pretty much strictly for work.  As far as CPU
    power it is pretty much equivelent to your Mini.  For the most
    part I find the Mini does outperfom my MBP.  I heavily use
    Parallels and Windows7 virtual machines, so the more cores
    the better.
    So, If you do a lot of CPU intensive stuff that is multithreaded,
    the Server may help.  If it is graphics intensive and your software
    heavily leaverages the GPU, you may actually take a hit on
    performance.

  • Mac mini server install DVD - install on a different computer

    I bought a Mac mini server (= a Mac mini with a Mac OS X Snow Leopard Server pre-installed) a while ago. I am planning to install Lion Server on the same Mac Mini and get rid of the Snow Leopard installation DVD. My question is, can the DVD that came with the Mac mini be used to install the server OS on a different computer (another Mac mini or iMac etc.)? or is it somehow tied to the original Mac mini?
    Thanks!

    Install discs included with a Mac are only able to install on the same model Mac. However historically Mac OS X Server install discs are not limited in the same way. (Remember there is no such thing as a Lion install disc.)
    The server install disc is more typically limited in being an older version of Mac OS X e.g. 10.6.3 and thus not able to boot and install on the latest model Macs. It is however possible to boot and install on an older Mac e.g. an older Mac mini but install on to an external hard disk which might even be the internal hard disk of another Mac connected via FireWire Target Disk Mode. You can then run the Mac OS X 10.6.8 Server Combo update to update it to the latest Snow Leopard Server version which will then boot successfully on all the current Macs including those that have only ever shipped with Lion.
    Since a DVD disk takes very little space I would suggest you don't throw it away.

  • SQL Server two database at two different locations

    Hi Guys,
    We are having same database at two different locations (Database A with Sqlserver 2008/Express, database B with Sqlserver 2012).
    Our requirement is when ever a row is inserted in a table of Database A from location 1. Same value should also be added in Server 2 at different location.
    So that at any point of time both the database base values should be same.
    Which is the best method to do it ?
    Regards,
    Raghu.G
    raghu

    Could you please give more information about the editions of SQL Server? Is SQL 2012 express as well?
    Do you also need udpates/deletes to be moved to another server? Also do you want changes in SQL 2012 to be moved to 2008 as well?
    With Express edition you have very limited options.
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • FileMaker Server problem on Mac Mini Server - Mac Mini won't boot

    I just installed a brand new Mac Mini Server today, and also FileMaker Server 11. A first-timer for both Mac OS X Server and FileMaker Server, I made an error as explained below, and right now I don't know how to get back on track with the system. It won't boot.
    So, how did this happen?
    At first everything was proceeding according to plan. I configured the pre-installed Mac OS X Server on the Mac Mini with users, groups and services. This was tested from clients and this seemed to work just fine. Then I installed and configured FileMaker Server. This was also tested from a client, and the example database that came with FMS was served up just fine.
    The problem arose when I tried to install my existing FileMaker databases. I simply checked to see where in the file system the example database was located, and then copied my old databases to that location (I think it was Library > FileMaker Server > Data > Databases or something close to it - can't check it now...). I had the FileMaker Server Admin Console running, and hit the Refresh button hoping that this would make FileMaker Server find the databases.
    This was my first error. I should have read ahead in the instructions to see that one is supposed to use an Upload Database assistant instead...
    What happened when I hit refresh was that the FileMaker Server Admin Console became completely unresponsive with a spinning ball as cursor. I left it for about an hour hoping it would terminate, but gave up and tried to shut it down. It wouldn't close, so I force quit it from the Finder. Then I tried to shut down FileMaker Server, but I needed to force quit this as well. After this I thought it would be best to reboot the Mac Mini, so I shut it down, but now it won't even boot, it just stays on the screen with the spinning wheel for ever!
    I have tried all the keyboard options while booting, but nothing seems to help. In safe mode, the grey progress bar just grows to about one third, then disappears and leaves the eternally spinning wheel.
    The server version of the Mac Mini doesn't have an optical drive, only two internal hard drives. I tried to reinstall from scratch using the optical drive on another Mac on the network. The startup disk appeared when I tried to boot the Mac Mini holding down the option key, and after about 20 minutes or so of the spinning wheel I could actually access the discs. I started by running Disk Utility to check disk permissions. There were a lot of repairs concerning permissions and groups, especially on "Library". It said "ACL differs on Library", I don't know what this is but this was repaired. I then ran Repair Disk. The volume appeared to be OK.
    When I tried to reinstall Mac OS X Server however, this failed with the message
    "You can't upgrade this version of Mac OS X because a newer version is installed. Mac OS X Server couldn't be installed on this disk." I don't know how this can be, but I may have run software update earlier today.
    What should I try next? Should I erase the primary HD and try to install again? Or should I install the system software on the secondary HD? Or should I just try to reboot as is in the hope that the disk permission repairs did the trick...?
    Any helpful pointers would be greatly appreciated!

    Hello there, I came across your post when browsing the forum for passive advice. I am in the same boat as you and am a first timer for both of these tools. I work for a company who now needs to expand its network and database capabilities. I have been assigned this task and these are the tools i have opted for. I have not yet purchased them and i am pleased to find someone who has my desired setup. Could you please advise on the simplicity of the setup and whether an advanced knowledge is required.
    I want to use it in a mixed operating system environment. Is this possible?
    Regards
    Matthew

  • Help Setting up Mac Mini Server for Printer/File Sharing to Windows comp.

    Hi, so in our office, we decided only to switch half of the office to macs for budgetary reasons. We purchased the mac mini server to replace the 5,000 year old one and have also gotten to macbooks and a mac mini. My other two co-workers unfortunately still are using two windows vista machines. We have important documents on the server hard drive and they also need our OLD ACT! database to access from it and I have not been able to get them to access the hard drive. Can someone please walk me through these steps? Also, ideally we want to be able to access this servers hard drive when we are out of the office and edit word documents and such, but I also have not been able to do that or make that work. Any help in these areas would be greatly appreciated!

    If you use a different login name for the network account to your existing local account then the local account will not be affected. You might want to transfer the contents of your existing local account to the new network account. To do this you could try the following
    Create new network account
    Login using old local account
    Now while logged in using old local account - connect to the File Server
    Enter the new login details
    It should hopefully list the Share that stores your new network account, complete the connection
    You should now have the Share mounted, copy the contents of your local account to the corresponding location in your new network account
    Note: The Library folder in your home directory contains all your settings
    Once complete logout of the old local account
    Try logging in to the new account
    In terms of limitations, it is going to be slower than a local account because it has to go across the network, and some badly written applications may have some issues but most will be fine.
    At this stage your local account has not yet been deleted so if you have problems you can revert to it.

  • Using DVI to VGA adaptor with HDMI to DVI port on Mac Mini Server

    Hi - I couldnt find anything on this, so I decided to post a new topic. We just recently purchased a Mac Mini server at work for iOS development. Before we launch in in one of our data centers and start remoting into the system, we need to conduct basic setup on the system.
    For this, we pulled out an old stock VGA montior we have around the office, and found an apple DVI to VGA adaptor (http://i51.tinypic.com/2mzb4lc.jpg)
    The problem is, the pins dont exactly line up... on the DVI to VGA adaptor there are 2 extra pins above and below the horzontial pin on the left hand side (http://i52.tinypic.com/2mxhg1j.jpg) that do no exist on the Mac Mini HDMI to DVI adaptor (http://i53.tinypic.com/2ywesrp.jpg).
    Ive checked other converters and it seems that all of them are setup the same way, with two pins above and below.
    Has anyone else had to deal with this issue? I really dont want to go and buy the Mini DisplayPort to VGA adaptor for one-time use.
    Thank you!

    Welcome to  Discussions!
    What you are seeing is the difference between an analog and digital DVI connector, as DVI as a specification can provide both types of signal, depending on implementation. When used in a mode where only one or the other type of signal is provided, the different connectors prevent a mismatch. VGA being analog, the DVI to VGA adapter is using an analog DVI connector. The other connector you are dealing with is a digital only connector. HDMI is digital only, hence the HDMI to DVI adapter being digital only. Thus you can not adapt from the HDMI port to VGA with just passive adapters, you would need a conversion device between. It would be cheaper and more effective to use a Mini DisplayPort to VGA adapter.

Maybe you are looking for