File name gets converted to upper case

I am facing an unusual problem with Solaris 10. When I insert an USB thumb drive formatted with FAT to copy some file from the stick, some of the files whatever gets copied to hard disk get their file names changed to upper case. This is quite random, at least, I am not being able to figure out what pattern of file names are causing this problem. Any suggestions?
Edited by: Holmes.Sherlock on Dec 4, 2012 1:13 PM

Hi...
you can translate the password in upper case before call bapi....
translate psw to upper case.
regards
Marco

Similar Messages

Value converting to upper case

Hi,
There is a table control, but when i am taking a value from the table in PAI of my screen, the value gets converted to upper case, can any one suggest me what would be happening. Is there any way to control this?
Thanks in Advance,
kushagra sharma

Hi Sharma,
Go to the screen painter for the table control screen, go to the screen attributes of the field (field you want to restrict the case change) and check the check box Upper/Lower case.
Hope this may help you.
Regards,
Smart Varghese

Problem in converting into upper case urgent

hi,
i working on module pool program.
in the initial screen there is two fields one is number one is name.
if i enter the name in the name field it is automatically converting into upper case,
but in this case my select query is not working,how to solve this,i mean i have to take same as it is what i entered.
kindly give me suggestion.it is urgent issue.i have to delever today.
Thanks,
mohan.

hi
in the Report to handle like this situation.. we use the extentions to the parameter as LOWER CASE .
parameters p_t type char10 LOWER CASE .
i think in the Module pool also.. we can do this in Properties of the FIELD... once check the Properties of the field... there could be a chance.
hi
there is field checkbox called UPPER/LOWER CASEat the bottom of the properties... if tick this u r porblem will be solved
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K
Message was edited by:
Naresh Reddy

Hi one pressing enter the fields are converted to upper case

hi
in table maintiance module pool program i have created thre are three fields
kunnr name1 and email id
now on pressing enter on maintiance screen the all the theree fields are converted to upper case i want to avoid this conversion to upper case....
pls suggest
and on pressing enter PAI is callled i want to avoid pai being called at this point of time
regards
Arora

yes i have activated the table
for tabel mantiance generater it is coming as disble so i suppose no need to gernereate table mantiance gerneartor again/
ys in dynpro for shp to name uppe or lower case check box is checked but it is coming as disabled.
pls suggest how to delect it and wht does upper/lower case check box in special attributed means?
regards
nishant

When pressing enter the values are converted to upper case in module pool

hi
tehre are three fields for maintanece in module pool
wheni press enter the fields are converted to upper case i want to avoid this as i dont want to have the upper case
i need to save in table as waht user has inputed not in upper case
so i dont want the fields to be automatically converted to upper case whne pressing enter on screen
regards
Nishant

hi Nishant ,
The solution to ur problem is breifly explained with a sample module pool program .check it below :
IN the TOP INCLUDE**********************
DATA :
 wempid TYPE z7684dp-empid , " same name as in the screen declaration
 wname TYPE z7684dp-name,
 wacc TYPE z7684dp-account,
 wdesg TYPE z7684dp-designation,
 ok_code TYPE sy-ucomm ,
 wa_z7684dp TYPE z7684dp,
 t_z7684dp TYPE STANDARD TABLE OF z7684dp,
*****IN THE PAI OF THE SCREEN 100(for example)***********
MODULE user_command_0100 INPUT.
CASE ok_code .
 WHEN 'CRE' . " function code for the pushbotton to insert the values
TRANSLATE wdesg TO LOWER CASE.
TRANSLATE wempid TO LOWER CASE.
TRANSLATE wname TO LOWER CASE.
TRANSLATE wacc TO LOWER CASE.
 wa_z7684dp-empid = wempid .
 wa_z7684dp-name = wname .
 wa_z7684dp-account = wacc .
 wa_z7684dp-designation = wdesg .
 INSERT INTO z7684dp VALUES wa_z7684dp .
 IF sy-subrc EQ 0 .
 MESSAGE 'SUCCESSFUL INSERTION TO TABLE' TYPE 'I' .
 ELSE .
 MESSAGE 'UNSUCCESSFUL INSERTION TO TABLE' TYPE 'I' .
 ENDIF.
 CLEAR: wa_z7684dp , wempid , wname , wacc , wdesg.
REVERT BACK WITH ANY FURTHUR QUERIES
DO REWARD WITRH POINTS IF USEFUL :)

Special character not being converted to upper case

Hi all,
I have an issue with special characters and upper/lower case.
The character "ü" is in one of the values of an InfoObject and when loading we get an error message for this value. The character "Ü" is in RSKC, but still we are getting an error when loading.
We are converting the values to upper case in the transfer rules, but this special character is not being converted to upper case...
We start with the value "Heüringen" and after conversion we have the value "HEüRINGEN" where we want to have "HEÜRINGEN".
Do you have any idea why this characer is not being converted?
Any ideas are welcome!
Best regards,
TMV

Hi Praveen,
What does this module actually do? What kind of characters will the special chars be replaced with?
Br,
TMV

[IDCS2-PC] PMString - convert to upper case

Hi everybody,
does somebody meet the problem that some of character couldn't be converted to upper case.
I have
PMString initialized with text
"lørdag". When I call function
ToUpper() I got
"LøRDAG", where there is one character in lower case which wasn't transformed.
Do somebody know why and which function should I used instead of that to be succesfull?
ThanX,
pyso

Hi everybody,
I've just found a solution. In SDK there is probably error because
PMString.ToUpper() doesn't work well but
WideString.ToUpper() works fine.
bye,
pyso

Password Is Converted to Upper Case in WAS 7.0

Hi Friends,
       I have a requirment where in we are using some funcation modules for User authontication . The import parameter for password is converting the password into upper case . Is there any way that i can do some settings or use a data type that allows me to take the password as it is with out converting into upper case.
We are working on WAS 7.0.
Thanks,
Mahesh

Hi Ravi,
    I have done what ever u have suggested and it works...
   Is there any setting that we can do so that the Upper/Lower case Check box is checked by default when executing the FM from se37.
Thanks
Mahesh

INCX file names gets mangled when transfered to Windows

When I export my InCopy articles from InDesign CS3, I can choose the file name BUT InDesign adds some of the text within the article to the file name.
If special Scandinavian characters is in the file names and we pack the files with zip compression, the file names gets corrupted and the editors can't check in the files to edit them.
How do we pack the files in a way so that this corruption does not happen. Yes, we can burn a hybrid CD-R but since we need to distribute the files over the internet, this is not an option for us...
/Dennis

Can't say I'm familiar with Scandinavian characters but could you give
us a bit more to go on? Like a before and after comparison of the names?
Does this happen if you're all working locally? If working remotely why
aren't you using the package feature?
Bob

Same as source file name when converting .msg to PDF

Hello,
When I right click a Word document and choose to convert it to an Adobe PDF file it takes a few seconds and asks me where to save it, not only this but it pre-populates the file name to match the original Word document, but obviously when saved if will be a PDF file - brilliant.
I have a folder structure with hundreds of *.msg files (Outlook email messages). When I do the same as the above the file name is not pre-populated, it is simply called "Memo Style.pdf", which in-turn means I can't batch the process easily either.
I checked the PDF Conversion settings in the Adobe ribbon menu in Outlook, however there is no setting to not prompt for a file name.
What makes this a little worse is the client is adamant this never used to happen and I can see evidence of this.
HELP!
Regards
J

Hello, I'm away from the computer right now. But I have lots of .msg files in a folder, I'm right clicking them in Windows explorer and selecting "Convert to Adobe PDF", when this is selected it triggers Outlook and starts converting the message to PDF, but it pre-populates the name as "Memo Style.pdf" which is a real pain and the client says this never used to be the case. We ideally want to do this in bulk, keeping the name it has before, but with the new .pdf extension - again the client says this used to be possible.
Outlook Adobe add-in conversion settings to follow as well as exact Outlook and Adobe Standard version numbers...

Convert to upper case

I need to convert certain fields from an upload file into upper case.
Any pointers as to how this can be done. Thanks.

hi,
u can use transalte command to convert into upper/lower case.as
loop at itab.
TRANSLATE itab1-fld1 TO LOWER/UPPER CASE.
modift itab1 index sy-index.
endloop.
if helpful reward some points.
with reagrds,
suresh babu aluri.

Editable ALV: Entered Values are not Converted to Upper Case

Hi Experts,
I'm getting stuck with this one...
Fieldcat-lowercase is initial
Associated domain is NOT "lower case"
New values entered by user are not converted automatically to upper case and - in result - chek result of lower case value is "invalid"
Must conversion be done manually?
Thanks for your help!
carsten

1. You may not press enter key after the input data,
2. You may get it field's fieldcat references different type. For exam x field like abc-f1. f1 type char 10.But your fieldcat dont use abc-f1 field.
DEFINE BFCAT.
    CLEAR SFCAT.
    SFCAT-FIELDNAME = &1.
    SFCAT-TABNAME   = 'GT_ITAB_BUF'.    SFCAT-SELTEXT_S = &2.
    SFCAT-SELTEXT_M = &2.
    SFCAT-SELTEXT_L = &2.
    SFCAT-COL_POS   = COLPOS.
    SFCAT-REF_FIELDNAME = &3.
    SFCAT-REF_TABNAME = &4.
    SFCAT-OUTPUTLEN = &5.
    SFCAT-NO_OUT = &6.
    COLPOS = COLPOS + 1.
    APPEND SFCAT TO TFCAT.
END-OF-DEFINITION.
COLPOS = 0.
BFCAT 'ONRNO'       '' 'ONRNO'       'ZONR_DATA01_S01' '' ''.

File not getting converted to the .EXT type

Hello Experts,
Please help me with an issue ...
Actually Iam doing a mailing program.... in which a newly generated invoices are sent to user....
the mailing is working fine.
The file which the user is getting in his mail box should be a .EXT type file....from where he will download the file and upload it in the airtel portal..... from where it been sms to the different number's present in that file......
But the problem is the file is not getting converted to .EXT type and when we are trying to upload it in airtel portal it is saying that file is not in UTF-8 format..
To check whether conversion to file type is working when Iam trying to convert the file in .TXT type its getting converted to text format...but not working with .EXT type when passing 'EXT' in doc_type of FM .
I checked the SCOT transaction if any setting exist but ...didnt found anything useful ...
Please help me to resolve the isuue

Hi joel,
From this thread
Shared Files - problems after upgrading APEX 3.0 to 3.1
i have taken your words,
In my development of the browser cache support for static files, I did notice some unexplainable behavior with IE and Firefox. When uploading static files and then testing them, it almost seemed like the browser would request the resource only some of the time (and then get the HTTP 304). If an Expires tag is not computed, I know Firefox will compute one itself.
As per my understanding, Is it cache_expire should be calculated?
I could not get that line.Could you please explain me.
Thanks in advance.
bye
Srikavi.

Can file name get from partial field value ?

Hi, Friend:
I have file receiver with FCC, I used variable substitution (I have to use this rather than dynamic configuration, since there are multiple files created by multi-mapping), so the file name is pass via payload to adapter.
In advanced tab, we can assigned to a variable like: payload:MT_XXXX,1,Filename,1
Now I do not want full value of Filename, I just need part of the value of it.
I will not consider an option of create another field to store part of the value, since after FCC, a blank line is created which is not acceptable by our integration partner.
Is there any way to get it ?
Thanks
Liang

Kevin:
If you can see from what Madhusudana Reddy suggested:
I created a node, saying "Tail" in end of structure, add one child node to it saying "Filename"
Now in my mapping program, I can pass real file name I wanted to child node "Filename"
In Variable substitution, I get the whole value of the node "Filename" when we naming the created file.
In FCC, I used Madhusudana suggested, it would not created blank line when using Tail.endSeparator '0'
Hope this give you some hints
@Carlos:
Java Mapping is different approach which we do not want to go at this stage.
Regars
Liang

File name getting changed while exporting file

I am exporting file of name something like
mithun.ruikar.111212.csv
I am using
response.setHeader("Content-disposition", "attachment; filename=mithun.ruikar.111212.csv");
to export my file.
Now what is happening is on JSP i get download popup and even i can save the file
and it shows proper contents inside.
Only problem is (default) name of file is
now changed to
mithun[1].ruikar.111212.csv.
If i am trying
ruikar.111212.csv only
then i get ruikar[1].111212.csv
and for 111212.csv i get 111212.csv, which is right.
So only when i use more than one . in file name the first . is preceded by [1].
How to solve this?

I dont have anything duplicate.
as i said my file name is of format
mithun.ruikar.121344.csv
here last part is time stamp.
and if use file name like 12344.csv or mithun.csv it works fine.
My problem is having filename with more than one dot
and there are no duplicates.
I would like to know some kind of escaping for these dots.

File name gets converted to upper case

Similar Messages

Maybe you are looking for