File names on sequence.
After the last Premiere CC update new kind of problem occurred. Name of the clip changes while bringing multicam clip from the viewer window to sequence.
In borwser I have logged footage (scene_shot_take). After bringing a section of a multicam-file to timeline only the actual name on the raw file is displayed (not the logged name). It's very time-consuming to change takes later on while I can't see which takes I have used on the sequence already.
Issue is with the filenames displayed on the clips that are on the timeline.
In browser window the files have the logged names that I gave them. But after bringing files to timeline, the filename displayed on the clip (in the timeline) changes to it's raw filename.
Steps takes:
Made multicam clips
Logging in browser window (renaming multicam files to: scene_shot_take) 0080.mov -> 23_1_4
Open logged multicam clip in viewer, putting in/out points and bringing section of the clip to timeline.
On the top of the clip in timeline the file name is displayed. But it's the raw name (0080.mov), not the logged name (23_1_4).
So I can't tell which takes I have used in my edit by just looking at the timeline because raw names are displayed instead of logged names.
=====================
Edited to number the steps (for clarity)
Similar Messages
-
Changing file name: Numerical sequence not good!
Im doing imports where I assign a new name to images with numerical sequence after it.
Problem is LR only lets me start from 1 and not 001.
Therefor when the files get into the hundreds, the files wont display correctly in Bridge.
Can you make LR do the sequence starting with 001?Absolutely, it can do this.
In the import dialog's filename box, pull down the list and choose "Edit" to edit your filename preset. You will then be able to create a custom preset with a three digit sequence number.
I've done exactly this myself. -
Reg : I need to generate a file name sequence number.
Dear All,
I need to generate file name in sequence number. Now i have generated file in specific folder. In that folder file i am reading one by one and generating. Problem is folder file some names having special characte those names are not generating while reading 'Cat' Caommand in shell script. Instad of that i want to generate files in 1.ldt,2.ldt to etc..
Please guide me how to generate in specific folder.
Thanks in advance.
Best Regards,
Velu.First, LabVIEW 7 allows you to pass string and path data types directly into the Matlab script node. Otherwise, in LV <= 6.1 you can do the following:
In LabVIEW, convert the string to an array of U8s using the String to Byte Array function. Then pass the U8 array into the Matlab script node as a Real Vector type. Finally, in Matlab, convert the Real Vector to a string using the char() function. For example:
stringAsString = char(stringAsRealVector)
Attached is an image that shows how to do this.
Good luck,
-Jim
Attachments:
Matlab_Script_Node_String_Input.GIF 6 KB -
Passing Dynamic File Name to ODI nterface for processing to another system
Hi,
I need help regarding passing a Dynamically Name changing fixed length Flat File in ODI Interface. This interface is built for taking the Flat File as Input and process it to SQL Server by applying Data Mapping and transformations... The input Flat File Name is sequence generated for eg: OEORD1123.txt and next file will be OEORD1124.txt and it sits in Oracle Conc tier. How to pass the latest file name to ODI interface for processing
Regards,
Anil..Hi Guys...
I would like to suggest a way.
a) create a single interface with dynamic resouce name (a ODI variable) with a filter to the month column like:
month_column = '#vCountMonth'
b) in the refresh tab of a first variable (I named "vMonth"), use the following query: (varialbe should be alphanumeric, "not persistent")
select to_char(to_date('#vCountMonth','MM'),'month') from dual
c) create one more ODI variable (I named "vCountMonth"), alphanumeric, not persistent and at its refresh tab write:
select lpad(to_char(#vCountMonth + 1), 2, '0') from dual
d) now just create a package, drag and drop the objects in the following order:
d.1) vCountMonth in set mode and set = 0 (zero)
d.2) vCountMonth in refresh mode
d.3) vMonth in refresh mode
d.4) the interface
d.5) vCountMonth in evaluate mode, evaluating "= 12"
==> if NO (KO, red line) link the KO line to d.2 step
==> a OK line is not necessary unless you have others steps after finish the evaluating
Make any sense? That is a single loop to have the interface developed only one time.
Please, remember to check each thread reply as Useful or Correct if they are useful to you... -
How to get the file name from Oracle B2B 10g
Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
<receive name="Receive_Note" partnerLink="GetB2BNote"
portType="ns1:Dequeue_ptt" operation="Dequeue"
variable="Receive_Note_Dequeue_InputVariable"
createInstance="yes">
<bpelx:property name="b2b.fileName" variable="WriteFileName"/>
</receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b userHi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
<receive name="Receive_Note" partnerLink="GetB2BNote"
portType="ns1:Dequeue_ptt" operation="Dequeue"
variable="Receive_Note_Dequeue_InputVariable"
createInstance="yes">
<bpelx:property name="b2b.fileName" variable="WriteFileName"/>
</receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user -
My editor requires that I name a file as in the following example:
FI_RX_London(sequence number)
if I try this while importing using file name with sequence, there will be a - sign in front of the number. My question, how do I remove the - signIn the import dialog, pick Filename-Sequence from the drop down File Naming list. (you will have done this already). Now click the drop-down list again and choose Edit. You will now see the Filename Template Editor window; remove the hyphen from the text box that shows
{Filename>>}-{Sequence #(1)>>}. When you edit this, you will see the example just above it, reflect the change. -
Officejet Pro 8600 Plus (new today - everything else working great), Vista 32-bit, HP desktop.
After scanning documents and creating a PDF file (Save to file on my computer w/USB connection), using HP Scan, it does not append numbers in sequence to base file name. HP Scan (Under Advanced Settings/Destinations) reads that it will do this (when you over over the base name field). Perhaps I have to enable something. Do you know how I can do this? Thank you.I'm not really sure what's going on. The install might not have written right. Try uninstalling and installing from a fresh download. Let me know what happens.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Missing file name in the sequence
Hi All,
I have struck with the problem which is finding the missing file name in the file_name column. This column also have sequence.
FAX_NAME RECEIVED SENDER FAX_SIZE
fax000000433.tif 01-JAN-07 redro 10k
fax000000434.tif 01-JAN-07 redro 10k
fax000000435.tif 01-JAN-07 redro 10k
fax000000436.tif 01-JAN-07 redro 10k
fax000000437.tif 01-JAN-07 redro 10k
One file name missing
fax000000439.tif 01-JAN-07 redro 10k
fax000000440.tif 02-JAN-07 redro 10k
fax000000441.tif 02-JAN-07 redro 10k
fax000000442.tif 02-JAN-07 redro 10k
fax000000443.tif 02-JAN-07 redro 10k
fax000000444.tif 02-JAN-07 redro 10k
fax000000445.tif 02-JAN-07 redro 10k
fax000000446.tif 02-JAN-07 redro 10k
fax000000447.tif 02-JAN-07 redro 10k
fax000000448.tif 02-JAN-07 redro 10k
fax000000449.tif 02-JAN-07 redro 10k
fax000000450.tif 02-JAN-07 redro 10k
Here i want to retrive the Faxname(fax000000438) which is missing
The output like..
I've Designed one BIRT rptdesign for this this in the bellow formate..
FAX_NAME RECEIVED SENDER FAX_SIZE Missing_Faxes
I've tried with bellow query but i did't get.
select Fax_Name digits from(select min(digits) MN from (select translate(s, '0' || translate(s, '1234567890', ' '), '0') digits 7 from (select filename s from received_faxes))) connect by level8 minus select distinct digits from (select translate(s, '0' || translate(s, '1234567890', ' '), '0') digits 10 from (select filename s from received_faxes))
Could you pls help me..This?
SQL> with t1 as
2 (select 'fax000000433.tif' nam from dual union
3 select 'fax000000434.tif' from dual union
4 select 'fax000000435.tif' from dual union
5 select 'fax000000436.tif' from dual union
6 select 'fax000000437.tif' from dual union
7 select 'fax000000439.tif' from dual union
8 select 'fax000000440.tif' from dual union
9 select 'fax000000441.tif' from dual),
10 t2 as
11 (select to_number(mid(nam,4,9)) faxno from t1),
12 t3 as
13 (select max(faxno) ma, min(faxno) mi from t2)
14 select (mi+level - 1) faxno from t3 connect by level <= ma - mi + 1
15 minus
16 select faxno from t2
17 ;
FAXNO
438
SQL> -
File name should be with sequence
Hello Experts,
I am working on file(NFA) to SFTP scenario with out mapping . I am getting file from AL11 folder with the name of XXXX_20150404033752.csv and receiver side (in PI) im getting file name as XXXX_20150404-040420-142.csv. But it should be 20150404033752_001_csv with out "-" and it should be sequence of 001, 002,... .
For example, if the files were given a name corresponding to a time stamp, the first file might be called 20150404040420_001. The second would be called 20150404040420_002. These files were both named after the date and time stamp April 04, 2015 at 04:05:02.
Without doing any mapping can I do this?
Thanks in advance,
Reddy.>>>I am working on file(NFA) to SFTP scenario with out mapping . I am getting file from AL11 folder with the name of XXXX_20150404033752.csv and receiver side (in PI) im getting file name as XXXX_20150404-040420-142.csv
If you want to append a counter to the source filename
enable ASMA for file name in sender and receiver channels
Set the file construction mode in receiver channel to counter
under counter def, maintain "_" as prefix and counter to 000
>>For example, if the files were given a name corresponding to a time stamp, the first file might be called 20150404040420_001. The second would be called 20150404040420_002.
Do you expect two files with the same timestamp? There should be some difference in the filename right as you can't have 2 files with samename.
If appending the counter doesn't work, either you have to go for a java mapping/AM to set the file-name as you want.
Dynamic file name for pass-through scenario - Process Integration - SCN Wiki -
How to get Sequence File Name ?
Hello everybody !!
I'm using TestStand 3.1 and i would like to get sequence file name. I've tried to use NameOf() function, but without success.
Of course, I've searched previous posts about the same question, but nothing works.
Is there someone able to tell me how to get sequence file name ?
Thanks a lot.
MrOrangeMrOrange,
first of all, the solution i will present only works for saved sequence files.
you got all information you need within TestStand itself, just browse for RunState.SequenceFile.Path. here you can find the filename. but the path of the file is also included in the string, so this is a part you have to get rid off.
you can use statements to extract the filename from the path. just search the string for the last occurence of "\\" (searchinreverse!) and then you can retrieve the right() part of the path. beware that right() needs the number of characters you want to extract, not the startindex!!
hope this helps,
Norbert B.
NI Germany
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Hi All,
I have a requirment where the Output file name should be appeneded with a sequence number which needs to be in sync with the number of records processed.
Each time this sequence has to be started from the previous number where it ended.
The soultion at the moment we have used it to store each time this counter in a file and read is back and update when done. Other solution is to meke use of the Tabe on ECC side
Is there any solution with in the map it self to maintain this number.
Any help will be appreciated.
Thanks
-KulwantHi Kulwant,
Within Mapping you cannot save the counter as container and even global variables are flushed once the mapping is executed for the message, so i think we cannot do it using mapping.
Also, dont know if you have tried OS commands feature provided by SAP for file adapter explained in link below:
[/people/santhosh.kumarv/blog/2008/07/27/glimpse-at-os-command-yet-another-scenario]
We can first create the file on some temporary location of the application server and then execute a batch file which would contain the code to fetch previous count(variables in OS commands can hold this value) and increment the same and copy the flie thus created by communication channel by appending the count to file name and also delete the file created by communication channel.
Hope this helps !
Regards,
Amit -
File name generation with sequence number
Hi All,
My scenario is, File to File. I need to generate the filenames at the target side like File1.xml, File2.xml..File9999.xml for each file triggered from source system. The interface tiggesrs multiple times in a day.
For example, for the first time, 5 files triggered, need to generate File1.xml,File2.xml..File5.xml. After some time the interface might trigger with 10 files, then need to generate files as File6.xml,File7.xml....File15.xml . Once the file count reaches 9999 then need to generate the files from 1 (File1.xml)again.
Could you please suggest me the possible solutions. For this any Lookups required?
Regards,
Praveen KumarHi Praveen,
Case 1: If a field in source data carries the information regarding the sequence.
You can map this value ( Directly .. or using some transformation ) in some temporary field in the target and then use a Variable substitution at the receiver communication channel.
Case 2. If the source file name carries the sequence information. then you can enable the Adapter specific settings in the Sender communication channel , and then get the information of the source file name using the Container object in the mapping. Then assign the sequence number to a field in the target , use a Variable substitution at the receiver communication channel.
Case 3 : If Case 1 and Case 2 are not applicable ... then you have to use a Ztable to store the sequence number , a function module to fetch the number , and then use a UDF in which you will implement the RFC call logic.Then the same process .... assign the sequence number to a field in the target , use a Variable substitution at the receiver communication channel.
BR,
Sushil. -
Sequence number/counter in File name using FTP
Hi
I have to add sequence number in the file name. How can i do that? everytime file generates it should pick up the latest file number.
Example File1 File2 File3. 1,2 and 3 are the sequnce number.
RegardsHi ria,
You can do this by dynamic file creation. Use this following code and cretate an UDF. The map the required file format to the target header structure as below;
UDF
sequence number:
IDENTIFIER is the parameter
Import com.bp.xi.util.*;
Code:
return ServiceUtil.getSequenceValue( IDENTIFIER, container, false );
Dynamic file:
Key & Value is the parameter
Code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get( StreamTransformationConstants.DYNAMIC_CONFIGURATION );
DynamicConfigurationKey confkey = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", Key );
conf.put( confkey, Value );
return "";
Input parameter "Key" is given a constant value"FileName"
Second parameter "Value" is the file pattern
Mapping
Constant(File)concat function sequence numberUDF ==> Dynami File udf ==>target header record.
In the receiver communication channel check the adapter specific function, filename
points if useful
regards,
Murugavel -
How to generate sequence no increased with an increment in o/p file name
Hi all,
I am doing a file to file scenario in which my output file name consists of a sequence number which is increased by fixed increment.i thought of proceeding with variable substitution by writing one udf involving Dynamic Configuration object (the udf describd in Micheal blog).However my problem is that i am unable to generate the sequence number with a fixed increment .plz guide me how to proceed to achieve the desired output filename with sequence number.
For ex:o/p file name:chxx.bcdtspd.00000002.<datetimestamp>.dat
:chxx.bcdtspd.00000003.<dattimestamp>.dat
The scenario is FTP so we cant use addcounter.Plz help as its urgent.
Regards,
Saurabh SharmaHi,
What you can do is.
U have to use the counter which increment everytime ur mapping is executed.
Steps which needs to be followed.
1) Maintain one table at R3.
2) Pass the control to R3 and update the table value with one.
3) For the second time fetch the counter value from the table and add 1 to it and again update the table with the increment value.
4) pass the incremented value to XI and use that counter value for ur file name.
Here u have to always pass 1 value to R3.
The method is called as lookup.
Just go through the below weblog:
Lookup - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Thnx
Chirag
Thnx
Chirag -
Get the ipad to display my photos in file name sequence
How can I get the ipad to display my photos in file name sequence instead of by time/date stamp? I want to display them in a particular sequence controlled by the filename I gave them.
Hey Tex,
Good idea. I've found a question that indicates that the ipad sorts by name (https://discussions.apple.com/message/9116248#9116248). Mine are all sorted by date/time. How did they do that?
The app you suggested looks promising, but it sounds like i have to manually rearrange my pictures, and since i have hundreds in each folder, this would be tedious. Is there an app that will allow me to display them by filename w/o me having to rearrange them myself??
Thanks.
WSC
Maybe you are looking for
-
Good day, Our company uses EBS 11.5.10.2. The company has a policy whereby any new manual journal needs to have the supporting documentation attached to it, using the attachment icon in the task bar. Users sometimes forget to do this, though. This ha
-
Font smoothing in the Book module
Hi everyone, I use the Book module and export the resulting pages to jpeg files. Any text (text field, page caption, photo caption) is rasterized when zooming to 1:1 on the exported jpeg file. The pattern on the font edges is sharp without any smooth
-
2LIS_02_SCL Missing POs and Schedule Agreements
Hi Experts, We have a problem of Data mismatch between BW & R/3 while loading data from 2LIS_02_SCL : While running setup for 2LIS_02_SCL with Document date range..... we missing some schedule agreements even though they fall in the same document dat
-
Why does iTunes play consecutive songs by the same artist so often?
Is there a way to stop or greatly reduce the issue in iTunes of playing consecutive songs by the same artist when playing in "shuffle" mode? There was a slide tool in preferences that allowed you to set that to "less likely" or "more likely" but tha
-
Java lost after crash while updating, can't seem to get it back
hi, while running software update, my computer crashed and i seem to have lost java. i've dowloaded a number of jse releases. most of them didn't work, one did: java15release1 however, when trying to install: j2se50 release 1-5, i got the alert "unab