FILE receive adapter deleted the empty file --Biztalk

Hi Team
Using scheduled task job, I put an xml file to Biztalk receive location path which has parameters(we can say as trigger file to output some results) and cannot be empty any time....But somehow not always...at times Biztalk receive adapter assumes it as an
empty file and delete it....and in result the required important output file is not generated in the scheduled windows....Not sure why sometimes it assumes as empty file though it has values...
kindly can anyone help me with suggestions/what could be the root cause for such strange behavior........
Regards
Sreedevi

Hey!
As Morten explains below it looks like the file may not be locked, you often get this problems when Reading files from a *nix share since the *nix platform doesn't Lock the files like a Windows share (NTFS). If you are reading this from a *nix share I recommend
using the FTP adapter rather then the FILE Adapter (there are some workarounds, but I would advice you to use the method I suggested).
Be aware that communicating with *nix shares over FILE is not supported (shoot me if I'm not correct).
Best regards
Tord Glad Nordahl
http://www.BizTalkAdmin.com |
@tordeman
Please indicate ”Mark as Answer” if this post has answered the question.

Similar Messages

FCC file channel cannot process the empty file

Hi,
My requirement is like that a msg mapping getting two files from different sources and combining into one file and send to the receiver. There is a possibility that any one of the file can be empty.. now problem is how to process the empty file in FCC file channel. When we trying to process the msg we are getting the error msg like "file end of exception". we already check the option empty file in file comm channel....under processing tab. But no use.Though we achieved through a module in sender channel. i want to know how to achieve this through simple content conversion by the FCC channel.
In Content conversion. Record----> item,.. here what is mean ''? 0 to outbound or 1 to outbound?
Regards
Balaji

Hi Balaji,
here what is mean ''? 0 to outbound or 1 to outbound*
means 0 to unbounded.
Let me remind u ... the requirement cannot be achived in this way.. if file is empty.
I hope u already checked the option..
process empty files.
I think u can handle this by, using a adapter module, in which..
if file size(ASMA) is zero.. create a empty message and send it
to the PI.
Babu
Edited by: hlbabu123 on Mar 9, 2010 2:36 PM

Downloading files - can I block the empty file from appearing at all? I'm not talking about the .part file, but the one that disappears later anyways.

Let's say I'm downloading several files, for each file that I'm downloading two new files appear in my download folder. For 'vol1.rar' I have ''an empty'' 'vol1.rar' and a 'vol1.rar.part' file, same for 'vol2.rar', 'vol3.rar', etc.
I would like to block this empty 'vol1.rar' file from appearing at all - it disappears after the download is finished anyway, and the .part file gets renamed with the actual name.
I'm downloading files to my desktop, from where I move them to the folders I want them in - having this disappearing 2nd file messes up the order I download the files in - if I add a new file after one of the files I was downloading has finished, the file be placed in the empty spot that the finished file has created, making it harder for me to move to the correct folder.
A lot of people have asked if it was possible to turn off the .part file, but I haven't seen a single thread about the empty file instead.
I know this file isn't necessary, because I moved it to another folder/deleted it many times before the download was finished and the real file was still fine.
So, any ideas as to how to block this file?

I don't believe there is any way to prevent file downloading if you allow internet access at all. as Király says, whatever they download and install will be limited to the guest account and will go poof on the logout.
however you can disable CD/DVD and external drives access. some of it can be done by enabling parental controls on the guest account. for more options you can install server admin tools
http://support.apple.com/downloads/ServerAdmin_Tools_105
and use workgroup manager to set further restrictions on the guest account.
P.S. workgroup manager can also forbid guest to mount disk images which will effectively make it impossible to install any programs at all even in the guest account.
Message was edited by: V.K.

File receiver adapter with the same filename than sender

Hi guys,
I am experiencing a problem when I use the Adapter Specific Message Properties to be able to receive a file with the same name as the sender.
I've been following the example of Michal Krawczyk (XI: The same filename from a sender to a receiver file adapter - SP14) but i get a problem related with the content converter parameters.
The error I receice in the File Adapter is the next:
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters!
I have been trying to do all the combinations with the content conversion parameters but the result is allways the same, MORE FIELDS FOUND IN XML ....
My XML structure is the next:
<ns0:MT_MDFranceN xmlns:ns0="urn:s-n:HR:MasterDataFrance">
 <lines>
 <line>
 <header/> 1..1
 <data/> 0...unbound
 </line>
 </lines>
</ns0:MT_MDFranceN>
In the header I write the name of the file with the code provided by SAP and Michal, so the name of the file is stored there.
any help?
Thanks!!!!!

I have changed the XML because, as you said, there is no need to introduce the filename inside the payload. Now the structure is the next:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_MDFranceN xmlns:ns0="urn:s-n:HR:MasterDataFrance">
 <lines>
 <line>
 <data/>
 </line>
 </lines>
</ns0:MT_MDFranceN>
Record Structure: lines,line
line.addHeaderLine 0
line.endSeparator 'nl'
lines.fieldSeparator 'nl'
line.fieldFixedLengths 1300
A sample of the payload is the next:
- <ns0:MT_MDFranceN xmlns:ns0="urn:s-n:HR:MasterDataFrance">
- <lines>
- <line>
<data>EDI_DC40_U5300000</data>
<data>E2HR_HD001 530000000000007802</data>
<data>E2HR_KY001 530000000000101TS 20070104000010 20070129</data>
000000601</data>
</line>
</lines>
</ns0:MT_MDFranceN>
And..... I still have the same problem, the same message in the file adapter:
 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters
Any idea of what can be the problem?
thank you very much!!!

To Copy the file content to another file and to delete the orginal file.

Hi ,
Can you pls let me know how i need to copy the contents of one file to other,
For e.g   P_FL Consits of following records ( Assume that file need to created on application server)
This is standard header ( header record)
name school class adreess ( item records)
xyz     abc     1        kkkkk
jjjj        cba     2       jkjkjkj
uiui      cab     3       oioioioi
i need to copy the above mentioned file contents( P-FL) into another file say P_NEWFL.
so how i need to create this new file and how to copy the content of old file to new file.
After copying the contents of old file to new file i need to delete old file.

Sample code to implement this
PARAMETER: p_file TYPE file DEFAULT 'd:\interface\In\barcoinbound2sap.txt',
           p2_file TYPE file DEFAULT 'd:\interface\In\backup_barcoinbound2sap.txt'.
START-OF-SELECTION.
OPEN DATASET p_file IN TEXT MODE ENCODING DEFAULT FOR INPUT.
OPEN DATASET p2_file IN TEXT MODE ENCODING DEFAULT FOR OUTPUT.
DO.
    READ DATASET p_file INTO line.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    TRANSFER line TO p2_file.
   IF sy-subrc NE 0.
     EXIT.
   ENDIF.
    SPLIT line AT ',' INTO lit_barco-prodnorder lit_barco-quant lit_barco-machtime lit_barco-duedate.
    APPEND lit_barco.
    CLEAR lit_barco.
ENDDO.
CLOSE DATASET p_file.
CLOSE DATASET p2_file.
dalete dataset p_file

File Adapter Overwriting the output files

Hi All,
I´m using a File Receiver Adapter to write flat files on to an FTP. Same Communication Channel is used for all types of output files (As per the business requirement the file name(
MzOutput.txt) shud b same for Deliverz orders, Purchase orders etc...). The receiver legacz szstem reads one file at atime and deletes it. So if i´m writing a Deliverz Order File, i have to wait until the file MzOutput.txt gets deleted and then i have to write the next file using the same name. in order to acheive this, i had used a module processor which waits until that MzOutput.txt gets deleted. Mz problem is
As there are ´n´ no of orders waiting in the queue, if at 12:14:00 the MzOutput.txt gets deleted, then two threads which check for the existance of the MzOutput.txt file finds nothing and tries to write at same time. as a result, first file got overwritten by the second file.
I dint check the indicator OverwriteExisting File in the CC configuration.If i use two different CC channels to write the same file, it is giving FTP Exception which is true.
I´m loosing few deliveries as a result of the above case. Can anzone please help me out in this regard?
Thnx in Advance
Anil

Hi Anil,
Why dont you write the files with 'Add time stamp' option on for the file name and then the third party/legacy system to read the files in the order which they were created.?
Another option will be to write these files into a folder with these Add time stamp option/counter option and make a shell script check the folder for the MzOutput.txt file exists in the folder from where the third party/legacy system reads the file and once it has deleted the existing file, then ur files shud be moved in the order in which they were written n the temporary folder.
This will avoid the queue of messages in the adapter engine.
Cheers
JK

Content Conversion Parameter in File Receiver Adapter

Hi all,
I have created one File Receiver Adapter with Message Protocol 'File Content Conversion' and with the following configuration:
Recordset Structure: Message
Message.fieldFixedLengths: 1000
My Message Type is:
LogErro_MT
Message (Type: String) (Occurrence: 0..Unbounded) (Details: Min,Max Length: 1000)
But the file created by it has no data inside it. If I change the Message Protocol to 'File', the content of the file is the XML generated by the Outbound Proxy.
Would someone can help me?
Thanks in advance
Leo

Hi,
Please create a data type with
Records
Message ---0..unbounded
and hten MT for the same.
In the receiver file adapter:
Recordset Structure: Message
Message.fieldFixedLengths: 1000
Please check this weblog for the same:
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
IS this what you are trying to do.
Regards
Vijaya

Using file receiver adapter with a different user

Hello.
I have a simple question (at least I think it is)
Can I use a file receiver adapter (where the transport protocol is NFS - not FTP)
so that a different user will access the directory (not the usual SAPServiceSID)?
I don't see any place for using username and password, and using the FTP protocol is not possible
because of security reasons.
Any help Appreciated.

Hello.
Thanks for the quick answers.
I'm sorry for not being clear enough before.
I have a microsoft network share on a different server then the PI.
When I use the path:
server\share
I manage to successfully put a file via the file receiver adapter, with NFS as the transport protocol.
However in order to do this, the owner of the share had to give credentials to the user: SAPServiceSID of my PI system
which is an active directory user.
The owner wants me to use a local user instead.
Can this be done with a local user?

Dynamic Configuration - Set Directory Path for File Receiver Adapter

Hi Experts,
I have a question regarding the dynamic configuration for the file adapter. Is it possible to set a directory path without a message mapping for the file receiver adapter? the problem is that I want to import a pdf document. this pdf document I want to store in a dynamic directory (depending on the filename). so I have to read the filename out of the dynamic configuration and generate (depending on the filename) a directory for this file. Is that possible without a message mapping? I cannot make a message mapping because the file has the pdf format and should not get changed.
best regards
Christopher Kühn

Hi Gaurav,
I use the ASMA (respectively the filename) for the sender adapter. After the pdf was imported into XI this filename is in the ASMA.
But what then??? How can I get this filename with the help of the variable substitution? and if I have this filename I have to change this filename a bit to generate the name / path of the directory.
Please explain it to me detailled
Thanks and regards
christopher

Temporary file Generation issue - file Receiver Adapter(NFS)

Hi Experts,
We are using Dynamic Configuration for generating the Dynamic File name as per the requirement in the File receiver communication channel with transport protocol NFS. As, per the requirement we need to use the "Use Temporary File" in write mode under processing parameter of File Receiver channel - as, the temporary file creation is one of the requirement of the target system.
We have used the dynamic configuration for generating the Dynamic File name so, i have set the Adapter specific Message attribute for channel .
Use Adapter Specific Message Attribute
Fail if Adapter-Specific Message Attributes
File Name
Temporary Name Scheme for Target File Name
Now , at the run-time due to the last parameter Channel is giving the error.
" Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'TargetTempFileName' was configured as mandatory element, but was not supplied in the XI Message header"
Request you all to suggest the workaround that the with Dynamic File Name generation we, can use the temporary file name generation scheme.
Regards,
Gaurav Jindal

Hi ,
Thanks for the reply.
If we are using the ASMA with the specific parameters:
Use Adapter Specific Message Attribute
Fail if Adapter-Specific Message Attributes
File Name
And I have choose the " Use Temporary File" in the Write mode of Processing Parameters.
As, per your suggestion, how we track the temporary file name is created as, i am not able to see that in the audit log.
Regards,
Gaurav Jindal

Can I delete the PDF file's content in Adobe Reader plug-in?

I create a plug-in for Adobe Reader, when I open the PDF file, can I delete the PDF file's content in the plug-in?

The people here are visitors who might have knowledge and might choose to share it, if they have the time, and feel like answering a question. Your questions, instead, suggest that you think it is someone's job here to answer your questions. If you want it to be someone's job, you should raise a support case. This too will require patience.
You will not welcome this advice, I am sure, but it is well not to try to use your own deadline to try to make other people feel the problem is more urgent to them.

Whats the use of 'Maximum Councurrency' in File Receiver adapter?

Hi All,
Whats the use of 'Maximum Councurrency' in File Receiver adapter?
Xier

Hello,
Refer the below thread and check it out my reply . I gave for JDBC adapter, but the concept is same for File/JDBC.
Re: JDBC Adapter - One Connection prior to SP20
Best regards,
raj.

Content Conversion in File Receiver Adapter

Hi,
I am doing a Content Conversion in File Receiver Adapter.
Input to the Adapter is:
<ns1:FileResponse_MT xmlns:ns1="http://www.bpmtest.com/bpm">
 <OrderID>123</OrderID>
 <Quantity>98</Quantity>
 <Price>76.23</Price>
</ns1:FileResponse_MT>
Desired output is: OrderID# Quantity# Price (123#98#76.23)
I tried to accomplish this with different settings in Recordset Structure and Conversion Parameters but could not achieve it, every time an empty file is produced.
Would appreciate any help on this.
Best Regards,

Hi,
Enclose your structure with a parent element like this.
<ns1:FileResponse_MT xmlns:ns1="http://www.bpmtest.com/bpm">
<parent>
<OrderID>123</OrderID>
<Quantity>98</Quantity>
<Price>76.23</Price>
</parent>
</ns1:FileResponse_MT>
Then give the parameters, it will work.
parent.fieldSeparator = '#'
parent.endSeparator = 'nl'
Regards,
P.Venkat

Variable Substitution File Receiver Adapter

Hi,
I am in the process of implementing a scenario involving the conversion of a .jpg file to .bmp. In my scenario, I'd like to the .bmp file name to be dynamically controlled; therefore, I have used the Variable Substitution option in the File Receiver Adapter.
In both the File Sender & Receiver comm. channels, I have ticked 'Adapter Specific Messsage Attributes' check-box and selected the 'File Name' option.
The File Receiver comm. channel also has the following:
File Name Scheme*: %File_Name%.bmp
Variable Name: File_Name
Reference: message:FileName
Having done the above, I am getting the following error message in Comm. Channel Monitoring:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'FileName' for variable 'File_Name'.: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'FileName' for variable 'File_Name'.
Would really appreciate your assistance on this.
Regards,
Reuben.
PS: The Sender File Adapter has the

Hi,
The full error message is s follows:
Runtime exception during processing target field mapping /ns0:MaterialBITMAP_In. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Test_Conversion_ method setfilename$[17092008, osinef, com.sap.aii.mappingtool.tf3.rt.Context@d3b0d3b] com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:MaterialBITMAP_In. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Test_Conversion_ method setfilename$[17092008, osinef, com.sap.aii.mappingtool.tf3.rt.Context@d3b0d3b] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:350) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Test_Conversion_ method setfilename$[17092008, osinef, com.sap.aii.mappingtool.tf3.rt.Context@d3b0d3b] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:294) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:294) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NullPointerException at com.sap.xi.tf._Test_Conversion_.setfilename$(_Test_Conversion_.java:61) ... 24 more RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:MaterialBITMAP_In. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Test_Conversion_ method setfilename$[17092008, osinef, com.sap.aii.mappingtool.tf3.rt.Context@d3b0d3b]
11:15:02 End of test
Reuben.

Error in file receiver adapter (Directory does not exist / cannot be create

I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??

Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK

FILE receive adapter deleted the empty file --Biztalk

Similar Messages

Maybe you are looking for