File receiver nl
hello
I have a JDBC to File scenario with content conversion csv file.
in one of the field of the file I have a String. for some reason I might be getting a nl from the DB (or something else that cuase my file to go to the next line). I am using fieldSeparator = , .
does any one know how can I avoid this from happening with out going to the next line between the ,?
I though maybe to change something in the DB?
Thanks
Kfir
Hey!
You can try to use a trim function in the message mapping before the target document gets into the receiver adapter (maybe this cant take off those characters)
Regards,
Juan.
Similar Messages
-
Adapter Module Filename in File Receiver Channel
Hi All,
is it possible to set the Filename in File Receiver Adapter from Adapter Module?
I know that it is possible to read the data
Channel ch = new Channel(moduleContext.getChannelID());
path = ch.getValueAsString("file.targetDir");
I Need to set the filename in Adapter Module, using of Payload is not possible because Payload is not xml.
Dynamic Parameters in Message Header is not possible because it is an multi mapping process an i need dynamic Filename for each Part
payload after mapping is like
MainDocument
SubMainDocument
MainDocument
SubMainDocument
i need special Name for each SubMainDocument in FileReceiverAdapter
regards
ralfHello Stefan,
interface mapping is an mapping like this:
outbound_interface => Inbound_Interface1
=> Inbound_Interface2
=> Inbound_Interface3
in sxmb_moni this looks like this
Soap_Header
Soap_Body
Payloads
=>MainDocument ( application/xml )
=> SubMainDocument ( text/xml )
=>MainDocument ( application/xml )
=> SubMainDocument ( text/xml )
First SubMainElement is routing to FileReceiverAdapeter A where Filename has to be like "NameA%nr%"
second SubMainElement is routing to FileReceiverAdapeter B where Filename has to be like "NameB%nr%"
%nr% is som value from the Payload.
Payload is not xml because using of Conversion Argent!!
I Think there is only one Dynamic in Header for all subelements, i have test it!
ralf -
File Receiver - Dynamically create filename from data in payload
Hi there.
Can anyone tell me the approach I need to take to be able to use the data in one field to determine the filename in the file receiver adaptor.
I have a requirement that requires that I save a file with the following mask:
xxxx_xxx<b><date extracted from field in payload></b>.csv
I would appreciate any help on this.
Thanks in advance.
Mick.Hi Mick,
you just need to use adapter specific parameters
and you will be able to set the name in your mapping
(from your payload)
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Variable Substitution File Receiver Adapter
Hi,
I am in the process of implementing a scenario involving the conversion of a .jpg file to .bmp. In my scenario, I'd like to the .bmp file name to be dynamically controlled; therefore, I have used the Variable Substitution option in the File Receiver Adapter.
In both the File Sender & Receiver comm. channels, I have ticked 'Adapter Specific Messsage Attributes' check-box and selected the 'File Name' option.
The File Receiver comm. channel also has the following:
File Name Scheme*: %File_Name%.bmp
Variable Name: File_Name
Reference: message:FileName
Having done the above, I am getting the following error message in Comm. Channel Monitoring:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'FileName' for variable 'File_Name'.: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Unknown message header category 'FileName' for variable 'File_Name'.
Would really appreciate your assistance on this.
Regards,
Reuben.
PS: The Sender File Adapter has theHi,
The full error message is s follows:
Runtime exception during processing target field mapping /ns0:MaterialBITMAP_In. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Test_Conversion_ method setfilename$[17092008, osinef, com.sap.aii.mappingtool.tf3.rt.Context@d3b0d3b] com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:MaterialBITMAP_In. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Test_Conversion_ method setfilename$[17092008, osinef, com.sap.aii.mappingtool.tf3.rt.Context@d3b0d3b] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:350) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Test_Conversion_ method setfilename$[17092008, osinef, com.sap.aii.mappingtool.tf3.rt.Context@d3b0d3b] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:294) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:294) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInternal(ServerMapService.java:431) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:169) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.execute(MapServiceBean.java:52) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0.execute(MapServiceRemoteObjectImpl0_0.java:301) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0_0p4_Skel.dispatch(MapServiceRemoteObjectImpl0_0p4_Skel.java:146) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NullPointerException at com.sap.xi.tf._Test_Conversion_.setfilename$(_Test_Conversion_.java:61) ... 24 more RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:MaterialBITMAP_In. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._Test_Conversion_ method setfilename$[17092008, osinef, com.sap.aii.mappingtool.tf3.rt.Context@d3b0d3b]
11:15:02 End of test
Reuben. -
How to access a url in file receiver CC with space in the folder name?
Hi
PI 7.11 sp4:
In a file receiver channel I would like to send the message to this folder:
de-prod.dk\bu\something\something\PTI eventstanden\archive\"
But I get this error message:
"Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
When I log on the server on which Pi is running I can access the folder using the mentioned url including the ""s.
All suggestions would be highly appreciated!
MIkael> But I get this error message:
>
> "Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
>
> My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
It comes from the "
Anything else but \ is treated as local folder under working directory of PI
> One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
It works for me just to copy the folder from Windows explorer into channel config. With space and without ". -
When I try to open an .ai/pdf file received through my email, it won't open and asks for a password. I have never set up any kind of password for email security, but have tried typing in my standard passwords. Nothing works. I wonder if it has anything to do with the use of my Wacom3 Tablet...I've been having trouble with it and was getting the same message when trying to open the User's Manual in my Applications/WacomTablet file on my hard drive. Any suggestions? I just downloaded the latest version for the Wacom and recently upgraded to Snow Leopard 10.6.7 (which I hate, and my CS3 hates, etc.)
It sounds like you have a a password-protected PDF. The password was set by the person who encoded it.
-
Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.
You need a third party app. Take a look at some of these on this Google page.
Open zip files on iPad -
Error in file receiver adapter (Directory does not exist / cannot be create
I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK -
What are all the fields covered in the Raw file received from the Card Co
Hi Experts,
I want to know what are all the fields covered in the Raw file received from the credit card company say AMEX before uploading the data into ASP system i.e. CCD format file to be uploaded in T-Code PRCC
Some of the fields I know:
1. Name of the Employee
2. Company ID
3. Credit card number
4. Currency
5. Amount
6. Exchange rate
7. Date of Transaction
8. Description
9. Document no.
10. Expense type
11. Expenses paid by company
Waiting for a positive response from your side
Regards,Hi
The below mention is the possible values/records will be received from Banks regarding credit card expenses
ORGANIZATION / HIERARCHY HEADER RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY NAME
COMPANY ID
SUB COMPANY ID
EFFECTIVE / FILE DATE
CCF VERSION
COMPANY NUMBER
TRANSACTION POSTING DATE START
TRANSACTION POSTING DATE END
FILLER
TRX CONTROL DATA
ORGANIZATION / HIERARCHY DETAIL RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CORP PARENT NODE
CORP CHILD NODE
PAST DUE BUCKETS RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
STATEMENT DATE
AMOUNT PAST DUE
30 DAYS PAST DUE
60 DAYS PAST DUE
90 DAYS PAST DUE
120 DAYS PAST DUE
150 DAYS PAST DUE
180 DAYS PAST DUE
180 PLUS DAYS PAST DUE
PREVIOUS BALANCE
FILLER
TRX CONTROL DATA
CARDHOLDER HIERARCHY RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
NODE ID
ACCOUNT NUMBER
FILLER
TRX CONTROL DATA
ACCOUNT HEADER RECORD 1
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
PROCESSOR
ACCOUNT NUMBER
ACCOUNT TYPE
LAST NAME
CARDH FIRST NAME
CARDH MIDDLE NAME
ADDRESS LINE1
ADDRESS LINE2
ADDRESS LINE3
ADDRESS LINE4
ADDRESS LINE5
CITY
STATE / COUNTY/ PROVINCE
POSTAL CODE
COUNTRY
NATIONAL ID
TELEPHONE NUMBER
WORK PHONE NUM
ID VERIFICATION CODE
DATE OF BIRTH
CYCLE CODE
FAX NUMBER
E MAIL ADDRESS
EMPLOYEE ID
CLIENT ID / CUSTOMER NUMBER
CUSTOMER VAT NUMBER
TITLE
STMT DATE
GENDER
FILLER
TRX CONTROL DATA
MAIN TRANSACTION RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CBS TR RUN DATE
ACCOUNT NUMBER
TRANS DATE
TRANS TIME
POST DATE
FILLER
AUTH REQUIRED
AUTH ID
CONVERS DATE
POS ENTRY
POS COND CODE
ACQUIRER ID
REFERENCE NUM
TRACE NUMBER
FILLER
TRANS ID
MCC
MCC INFO DATA
MERCH ACCEPTOR ID
MERCH DESCRIPTION
MERCHANT CITY
MERCHANT STATE / PROVINCE
MERCHANT POSTAL CODE
MERCH COUNTRY
MERCHANT VAT NUMBER
MERCH DESC FLAG
MERCHANT REFERENCE NUMBER
SOURCE CURRENCY
SOURCE AMOUNT
BILLING CURRENCY
BILLING AMOUNT
SETTLEM CURRENCY
SETTLEM AMOUNT
US DOLLAR CURR
US DOLLAR AMT
GB POUND CURR
GB POUND AMT
EURO CURRENCY
EURO AMOUNT
ASIA YEN CURR
ASIA YEN AMT
SWED KRON CURR
SWED KRON AMT
CANADIAN CURR
CANADIAN AMT
CONVERSION RATE
DB CR FLAG
MEMO FLAG
CORP ACCT NO
SALES TAX
SALES TAX FLAG
VAT TAX
VAT TAX FLAG
PURCHASE ID
PURCH ID FLAG
TRAN TYPE
NO OF ADDENDUMS
VISA_MCI TRAN CODE
ADDENDUM KEY
TICKET NUMBER
MSG TYPE
FILLER
VAT EVIDENCE FLAG
CUSTOMER REFERENCE NUMBER
DISCOUNT AMOUNT
MESSAGE ID
SUMMARY COMMODITY CODE
CUSTOMER VAT NUMBER
FILLER
TRX CONTROL DATA
The above mentioned is Just 50% of data will be received form the banks. Still footer details have to added.
Thanks,
Nandagopal C
Edited by: Nandagopal Chiranjeevi on Feb 6, 2009 5:40 AM -
SFTP sender to File receiver mapping of file names
My scenario is: sender channel = SFTP (Seeburger) transferring multiple PDF files to Receiver adapter File (NFS).
These PDF files need to have the same name as the original files from the sender (3rd party) system.
Because these files are being processed without an interface, I can't use UDF to help map the file names.
I've tried using Seeburger's localejbs/Seeburger/AttribMapper to map the names, as follows:
File (NFS) receiver channel config:
- ASMA boxes for 'Use Adapter-Specific Message Attributes' and 'File Name' are ticked
- Module localejbs/Seeburger/AttribMapper is on the first line in the module tab under processing sequence, with module key = AttributeMapper
- Under Module Configuration:
- Module Key = AttributeMapper
- Parameter Name = http://sap.com/xi/XI/System/File/FileName
- Parameter Value = @http://seeburger.com/xi/SFTP/dtSubject
(I haven't entered any attribute module config on the sender side)
This setup fails on the receiver side with the message 'Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Channel stopped by administrative task.' (not very helpful!). All I can get from that is that it doesn't like my module configuration!
Can anyone help me understand the correct way to do the file name mapping for my specific scenario?
Regards,
ChristineWe've got this working at last!
The main problem was indeed the missing .sca file from Seeburger: SeeModuleCollectionPI.sca
Our Basis team deployed this file this morning. After a bit of fiddling around with the attribute mapping, my test files were transferred successfully with their original names.
The config I ended up with is just as described in another forum post for SFTP to FTP, but I'll repeat it in more detail here:
Sender channel
Parameters tab:
Adapter Type = SFTP (Seeburger)
(sender, transport & message protocol = SFTP)
Scheduler = x in all appropriate days, with interval = 1 (minimum allowed)
(rest here is specific to your environment, but I set filename to *.pdf to get all .pdf files from the sender)
Module tab
Processing Sequence
Number Module Name Type Module Key
1 localejbs/Seeburger/AttribMapper Local Enterprise Bean AttribMapper
2 localejbs/Seeburger/solution/sftp Local Enterprise Bean solutionid
3 localejbs/CallSapAdapter Local Enterprise Bean exit
Module Configuration
Module Key Parameter Name Parameter Value
AttribMapper http://sap.com/xi/XI/System/File/FileName @http://seeburger.com/xi/common/dtSubject
Receiver Channel
Parameters tab:
Adapter type = File
(receiver, with transport protocol File System (NFS), etc)
Target tab:
Target directory (set to your required PI server directory)
File Name Schema = * (can be anything, will be ignored)
Processing tab:
(your requirements-specific settings - mine were create, write directly, file type binary)
Advanced tab:
Under Adapter-Specific Message Attributes (ASMA):
tick the following:
Use Adapter-Specific Message Attributes
Fail If Adapter-Specific Message Attributes Missing
File Name
Modules tab:
Processing Sequence
Number Module Name Type Module Key
1 CallSapAdapter Local Enterprise Bean 0
(nothing under Module Configuration)
Thanks to those who kindly took the time to try and help me, your suggestions pointed me at the real problem.
Christine -
File Receiver Adapter - time stamp in front possible ?
Hi all together,
is it possible with the file receiver adapter to add a time stamp in front of the filename?
f.ex. <timestamp>_SUFFIX.dat
With file creation mode "use timestamp" and file name scheme
SUFFIX_.dat it will create
SUFFIX_<timestamp>.dat .
Thanx a lot for your help
regards
HansHi,
This is not possible in the communication channel, but if you want to add date time stamp on the filename, you can use dynamic configuration. For that you have to write an UDF in the message mapping concatenate the date tme stamp with the filename and extension.
In the communication channel you need to check on the message attributes so that when the adapter framework is called the filename generated in the message mapping would be used by the adapter. In the communication channel remove the filename and put * in the filename, as filename is one of the mandatory parameters in the comm channel.
Regards,
Indranil
Award points if helpful -
Dynamic File name for File receiver adapter
Hello,
I am doing Proxy sender to File receiver scenario.
Filename is generated in SAP R/3 program and I want to create the file with this same name
on target location.
please suggest me how to use this file name in Receiver file adapter?.
Thanks & Regards
JageshHi,
you have to enable the adapter specific parameter --> file name in both the sender and the receiver CC to get the input file name as output file name.
Refer this blog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Also you need to use this udf
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Also refer this blog:
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
Nithiyanandam -
Xml file in dynamic file name in file receiver adapter
Hi,
I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
Does anybody have the solution to my problem? thanks in advanceThank you Raj for the direction
The way to do it is :
1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
2. Put a "*" on the file name scheme
3. In IR, create a UDF to set up target file name :
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// set up file name for receiver adapter
String SourceFileName = conf.get(key);
conf.put(key, TargetFileName);
return " ";
4. Map the above UDF to the header level of the target structure.
Regards,
Idi -
Whats the use of 'Maximum Councurrency' in File Receiver adapter?
Hi All,
Whats the use of 'Maximum Councurrency' in File Receiver adapter?
XierHello,
Refer the below thread and check it out my reply . I gave for JDBC adapter, but the concept is same for File/JDBC.
Re: JDBC Adapter - One Connection prior to SP20
Best regards,
raj. -
Content Conversion Parameter in File Receiver Adapter
Hi all,
I have created one File Receiver Adapter with Message Protocol 'File Content Conversion' and with the following configuration:
Recordset Structure: Message
Message.fieldFixedLengths: 1000
My Message Type is:
LogErro_MT
Message (Type: String) (Occurrence: 0..Unbounded) (Details: Min,Max Length: 1000)
But the file created by it has no data inside it. If I change the Message Protocol to 'File', the content of the file is the XML generated by the Outbound Proxy.
Would someone can help me?
Thanks in advance
LeoHi,
Please create a data type with
Records
Message ---0..unbounded
and hten MT for the same.
In the receiver file adapter:
Recordset Structure: Message
Message.fieldFixedLengths: 1000
Please check this weblog for the same:
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
IS this what you are trying to do.
Regards
Vijaya -
Operating system command in file receiver adapter
Hi,
How to use the Run Operating system command after message processing option in the parameters tab of the file receiver adapter.
I am working on a scenario wherein a batch file needs to be invoked after the file is written on the file system.
So how do i invoke this batch file from the file reciever adapter ( Run Operating system command after message processing ).Hi,
did you see this page?
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/556cb799c93677e10000000a114a6b/content.htm
it shows all you need to know
Regards,
Michal KRawczyk
Maybe you are looking for
-
Writing variable value to a textfield during(not at the end of script) script.
Hi, May be this is a stupid question, but I need to know the answer. The question is Is it possible to write a variable's value to a text field or numeric field during or in the middle of a script, not like at the end of script. Actually I found that
-
How do I import the address book from another hard drive?
I wish to know if t is possible to import the address book from a slave drive that is bootable, but operating system (XP Pro Sp3) is not supported by my new motherboard. Thank you.
-
SunOS 5.10 spawns multiple PID's for same java process
On SunOS 5.10 I see same java process having multiple PID's. ps -ef lists out the same java process running from same path with multiple PID's. What can be the reason for this? Please let me know if you need some more information..... Edited by: saya
-
Change the attribute structure of a dynamic query object
Hi, As seen below, the attribute structure is a Z structure.. I want to revert/change it to the std structure CRMT_BUPA_IL_HEADER_SEARCH I don't find any display/change buttons there...how do I achieve it? Thanks Madhukar
-
Hi all , i can you please help me if we will get the finish material from customer ,as customer not statisfied with quality ,then how you are managing so that Quality inspection has to be carried out ?? what is the SD related flow ...to take material