File selection list
When I select files to be sent I do not see a list, just a progress bar for each file added. How can I view the list of files before sending so I do not duplicate files or have to keep reviewing the list manually ?
Are you using Adobe Send from a web browser (at cloud.acrobat.com), Adobe Reader, or Outlook?
Similar Messages
-
How to create Dynamic Selection List containg file names of a directory?
Hi,
I need a Selection List with a Dynamic List of Values containing all file names of a particular directory (can change through the time).
Basically, I need an Iterator over all file names in a directory, which could be used for Selection List in a JSF form.
This iterator has nothing to do with a database, but should get the names directly from the file system (java.io.File).
Can anybody tell me how to create such an iterator/selection list?
I am working with JDeveloper 10.1.3.2, JSF and Business Services.
Thank you,
IgorCreate a class like this:
package list;
import java.io.File;
public class fileList {
public fileList() {
public String[] listFiles(){
File dir = new File("c:/temp");
String[] files = dir.list();
for (int i = 0; i < files.length; i++) {
System.out.println(files);
return files;
Right click to create a data control from it.
Then you can drag the return value of the listFiles method to a page and drop as a table for example.
Also note that the Content Repository data control in 10.1.3.2 has the file system as a possible data source. -
New PAR file not appearing in the Portal Archive Selection list
Hello Knowledgeable Portal Ones,
I am on EP6.0 SP13.
A developer on the team created a new PAR. It was uploaded, and it is now showing in my portalapps directory. A super-admin for the portal can successfully create an iView using it (New from PAR), but developers (who have lesser security access) can not. When developers attempt to do so, no portal archives appear in the portal archive selection list. In fact, developers would not be able to create a new iView from any PAR.
I see that the portalapp.xml has placed the PAR in "high-safety". I suppose this may be causing the problem.
How do I address this problem?
Thank you for your feedback.
KevinHi Kevin,
there are two known possibilities for this behaviour:
1.) Within the portalapp.xml, the property com.sap.portal.pcm.Category has been set to "platform". This should only occur if someone imported an existing PAR to modify it. Also see Browse deployment iview
2.) Someone has changed the permissions for application access (under System Administration - Permissions - Portal Permissions - Applications - <YourApplication> --- There the one who should create an iView from a component must have Read permission for the corresponding application, also see http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604e505fd11d7b84200047582c9f7/frameset.htm - Administrator Permissions - For portal components
Hope it helps
Detlev -
How to Insert user selected files as list attachment using JavaScript?
I could able to Inset list items using ECMA Script, But for the user added attachment how to save it to list item.
Please helpcheck the similar post
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3d92510f-f966-45b2-989d-734ba21c5ce5/how-to-attach-file-to-list-item-using-javascript-in-sharepoint-2010?forum=sharepointcustomizationprevious
More links
http://sharepoint.stackexchange.com/questions/88487/using-sharepoint-client-api-to-upload-file-as-attachment-in-javascript
http://sharepoint-community.net/forum/topics/copy-attachments-of-sharepoint-list-item-to-a-document-library -
Print Button Derived From a Select List Is Not Working
Hello,
I followed the instructions "Creating a PDF Report from Derived Output Format" http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm#t2
Steps
In order to derive the output format, you need to create an item that contains the list of formats to select from. Perform the following steps:
1. Under Items, click the Create icon.
2. Click Select List.
3. Make sure Select List is selected for Select List Control Type and click Next.
4. Change the Name to P<#>OUTPUTLIST and click Next.
5. You need to specify the list of output types for the report and the bottom of the page. Select the Create or edit static List of Values
6. Enter the following values and click Apply.
Display Value Return Value
PDF PDF
Word RTF
Excel XLS
HTML HTM
XML XML
7. Select No for Display Null Option and Click Next.
8. Change the Label to Output Format and click Next.
9. Enter PDF for the Default and click Create Item.
10. Now that the list of output formats is created, you need to change the Output Format when the Print link is selected. Under Regions, select the Print link.
11. Under Printing, select Derive from Item for Output Format and select the item you just created P<#>OUTPUTLIST for Item and click Apply Changes.
12. Click Run Page.
13. When the report is displayed, select Excel from the list of Output Formats. Note: In Oracle Application Express 3.1, the XML format was added
14. At the bottom of the report, select the Print link.
15. A window appears asking you which program you want to open the Excel file with. Click OK (or Open depending on what browser you have) . Excel is open and the report is displayed. Close the Excel window.
16. You can also create a button to produce the report based on the output format rather than clicking the Print link at the bottom of the report. Click Edit Page.
17. Under Buttons, click the Create icon.
18. Accept the default and click Next
19. Select Create a button displayed among this region's items and click Next
20. Enter P<#>_Print for the Button Name, enter Print for the Label and Request and select HTML Button for Button Style. Then click Create Button
21. The region printing link contains the id of the region. Since you want to invoke the print from a button instead of the link you need to create a branch and specify the FLOW_XMLP_OUTPUT_R### parameter in the Request field for the Action so the application knows what to do when the Print button is pressed. Under Regions, select the Print link.
22. Ctrl-C the FLOW_XMLP_OUTPUT_R### section of the Print URL field. Since you are going to invoke the print from the button, you can remove the Print in the Label Link field and click Apply Changes.
23. Under Branches, select the Create icon.
24. Accept the default and click Next
25. Enter the current page for the Page and paste the FLOW_XMLP_OUTPUT_R### parameter that you copied into the Request field and click Next.
26. Select P<#>_PRINT for When Button Pressed and click Create Branch
27. Click Run Page
28. Select XML for the Output Format and click Print.
If I use the link at the bottom of the report region when I set the print options on the print tab of a report, it will print out in both pdf and rtf formats. I get an error with the Excel format. The print button isn't even working. When I select the button, nothing happens.
Any help is appreciated.Hello Andy,
I ended up putting in a ticket with Metalink. It is a known bug it seems. This is what the rep said:
UPDATE
=======
These bugs are fixed in the next ApEx patch 3.1.2. Patch 3.1.2 is expected (tentatively) in 2 weeks at the
earliest.
The bug fixes for these bugs have been backported to 3.1.1 and the one-off patches (patch 7202883 & 7156139) can be downloaded from metalink. One-of
f patches do not undergo the normal full regression testing, as is done for the
full APEX 3.1.2 patch set.
Once 7202883 and 7156139 were applied, I was able to download in all formats.
Kelly -
Report displayed based on Select List condition
Hello,
Any help would be appreciated.
I have a report and a select list, P55_MISSING. The select list contains the column names in the table that the report displays.
If I select one of the column names, I would like to display all records where that column name is null.
The sql I have at the moment is:
select
"ID",
"APPLICATION",
"SHORT_DESCRIPTION",
"DESCRIPTION",
"OPC_NET_NAMES",
"PROCESSING_SCHEDULE",
"PROCESSING_REGULARITY",
"PLATFORMS_INVOLVED",
"UNIX_DIRECTORIES",
"SOURCE_FILES",
from "APP_METADATA"
where :P55_MISSING IS NULL
If I select 'source files' for example, I would expect to see 3 out of 4 records stored in the table. However, I receive the message 'no data found'.
Any help would be great. Thank you.Hi
In order to doe this you will have to use dynamic sql (so you have to change your report type to 'SQL Query (PL/SQL Function Body Returning SQL Query)').
It would then look something like this...
DECLARE
l_sql VARCHAR2(32767);
BEGIN
l_sql := 'SELECT id,
application,
short_description,
description,
opc_net_names,
processing_schedule,
processing_regularity,
platforms_involved,
unix_directories,
source_file
FROM app_metadata
WHERE ';
l_sql := l_sql||:P55_MISSING||' IS NULL';
RETURN l_sql;
END;Sorry, I can't test this as I don't have your tables.
Cheers
Ben -
Outlook - The path specified for the file SharePoint Lists PST is not valid
Some users are connecting via Citrix XenApp to Microsoft Server 2008 R2 and using Microsoft Office 2010 (14.0.7109.5000) SP2 MSO (14.0.7116.5000) - Microsoft Office Profressional Plus 2010 x86 version for their email. Microsoft Exchange Server 2010
SP2 for email.
They are connected to Microsoft SharePoint 2010 SP2 August 2013 CU, via a SharePoint Calender; they have View permissions to the SharePoint calendar using Classic Mode permissions (Not Claims). No permissions have / are changing on this SharePoint
Calendar. They connect to the SharePoint Calender to Outlook.
When they open up their Office Outlook client, they receive an error "Outlook Data File" "The path specified for the file \AppData\Local\Microsoft\Outlook\SharePoint Lists.pst is not valid." OK
They select OK and they get a window popping up with the option to try to find the SharePoint list. "Create/Open Outlook Data File" (File name: 'SharePoint Lists') Open Cancel. They select Cancel.
They are returned to their Outlook client "email."
As an I.T. administrator and SharePoint Administrator, I had a remote session with them, using Bomgar software and I Go to File Menu, Account Settings, SharePoint Lists Tab but there is no list there so go to the Data Files tab and see SharePoint Lists listed.
Selecting it once, and clicking on Settings... button gives error message similar to the one above about PST not valid.
STRANGE in that, when you do that! You can go to Home tab, Calendar (Ctrl+2), and see Other Calendars and now the SharePoint calendar that was supposed to be there before, but was just "empty!" There was only the Other Calendars
option but it didn't have any "sub" calendar item.
A similar issue is when Other Calendars is listed, and has a sub calendar listed, a SharePoint connected calendar. You click on it and get "Microsoft Outlook" "The set of folders cannot be opened. The path specified for the file c:\Users\USERNAMEHERE\AppData\Local\Microsoft\Outlook\SharePoint
Lists.pst is not valid." OK
Click OK and go through the above steps to get the same result. After going into Account Settings, Data Files, checking on the Settings... button, and receiving the error message, again mentioned above, and the prompt to Create/Open Outlook Data File,
thgen I can go back into Account Settings, Data Files, and double click on the SharePoint Lists and instead of an error, the Outlook Data File comes up, with Change Password... Compact Now, Comment, Name, Filename, Format (Outlook Data File) OK Cancel.
Can go back to the Calendar (Ctrl+2) and Other Calendars, and the SharePoint Calendar "Sub calendar" will appear and operate as normal! All was done was go into the Account settings and "check" on the "error."
Tried to delete the SharePoint Lists and close out and add it and then go back in, and it "worked" for a few days. I later turned on Logging and for over 24 hours it was on for the user. The user was not on forever.
In the Outlook Logging folder, from the users profile, I found many *.log files, firstrun, OPMLog, ETL files, one of which is 6MB, and some prof_001_outlook....txt files. I clickedo n the SharePoint Lists.pst.log file 1KB
It is listed here:
Store File Name: SharePoint Lists.pst
Date|Time|Action|Search Owner|NID|Change Action|Change Semantics|URL|Count Of DocIDs|Next NID Index to add to All Msg folder|Next NID Index to push to FTE|Folder Path|Folder Path ID|HRESULT|Result Status
2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=FALSE)||||0x80040818|FAIL
2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=TRUE)|||||OK
2014/05/23|08:10:22:673|Marking store for re-push: Newly created store|0|||||||||||OK
2014/05/23|08:10:22:673|SGO_ScMarkPushEverythingDone|0|||||||||||OK
firstrun.log
*** Starting First Run (05-23-2014 07:32:08) ***
...HrPreSplashFirstRun called.
...HrPreLogFirstRun called.
...HrPostLogFirstRun called.
...deleting WAB4/UseOutlook because we're using MAPI.
...writing UUID to HKCU.
...setting Primary Client to Outlook.
*** Ending First Run (05-23-2014 07:32:26) ***
OPMLog.log
2014.05.23 07:32:28 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.05.23 07:32:28 HELPER::Initialize called
2014.05.23 07:32:28 Initializing: Finding a Transport
2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize called
2014.05.23 07:32:28 Initializing: Finding a Transport
2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:32:45 HELPER::Uninitialize called
2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
2014.05.23 07:32:45 HELPER::Uninitialize called
2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
2014.05.23 07:32:45 Resource manager terminated
2014.05.23 07:34:06 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.05.23 07:34:06 HELPER::Initialize called
2014.05.23 07:34:06 Initializing: Finding a Transport
2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize called
2014.05.23 07:34:06 Initializing: Finding a Transport
2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:35:12 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:35:12 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:35:12 EXECUTING Put MAPI TASK
2014.05.23 07:35:13 Starting the Spooling Cycle
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:35:13 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:35:13 Sending one message
2014.05.23 07:35:13 Progress: Sending message 'RE: Good Morning!' (size 14.76 KBytes)
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:35:13 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:35:13 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:35:13 FINISHED MAPI TASK
2014.05.23 07:35:13 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:35:13 [email protected]: Synch operation completed
2014.05.23 07:35:13 Sending done, Error code = 0x00000000
2014.05.23 07:35:13 Sending done, Error code = 0x8004010f
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:35:13 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:37:53 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:37:53 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:37:53 EXECUTING Put MAPI TASK
2014.05.23 07:37:53 Starting the Spooling Cycle
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:37:53 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:37:53 Sending one message
2014.05.23 07:37:53 Progress: Sending message 'RE: Good Morning!' (size 14.03 KBytes)
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:37:53 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:37:53 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:37:53 FINISHED MAPI TASK
2014.05.23 07:37:53 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:37:53 [email protected]: Synch operation completed
2014.05.23 07:37:53 Sending done, Error code = 0x00000000
2014.05.23 07:37:53 Sending done, Error code = 0x8004010f
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:37:53 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:57:34 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:57:34 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:57:34 EXECUTING Put MAPI TASK
2014.05.23 07:57:34 Starting the Spooling Cycle
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:57:34 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:57:34 Sending one message
2014.05.23 07:57:34 Progress: Sending message 'TP - Hold PE Call ' (size 6.00 KBytes)
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:57:34 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:57:34 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:57:34 FINISHED MAPI TASK
2014.05.23 07:57:34 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:57:34 [email protected]: Synch operation completed
2014.05.23 07:57:34 Sending done, Error code = 0x00000000
2014.05.23 07:57:34 Sending done, Error code = 0x8004010f
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:57:34 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:58:58 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:58:58 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:58:58 EXECUTING Put MAPI TASK
2014.05.23 07:58:58 Starting the Spooling Cycle
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:58:58 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:58:58 Sending one message
2014.05.23 07:58:58 Progress: Sending message 'TP - Hold PE Call' (size 6.00 KBytes)
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:58:58 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:58:58 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:58:58 FINISHED MAPI TASK
2014.05.23 07:58:58 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:58:58 [email protected]: Synch operation completed
2014.05.23 07:58:58 Sending done, Error code = 0x00000000
2014.05.23 07:58:58 Sending done, Error code = 0x8004010f
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:58:58 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:03:12 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 08:03:12 [email protected]: UploadItems: 1 messages to send
2014.05.23 08:03:12 EXECUTING Put MAPI TASK
2014.05.23 08:03:12 Starting the Spooling Cycle
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:12 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 08:03:12 Sending one message
2014.05.23 08:03:12 Progress: Sending message 'Accepted: TP - Hold PE Call' (size 5.70 KBytes)
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:12 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 08:03:12 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 08:03:12 FINISHED MAPI TASK
2014.05.23 08:03:12 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:03:12 [email protected]: Synch operation completed
2014.05.23 08:03:12 Sending done, Error code = 0x00000000
2014.05.23 08:03:12 Sending done, Error code = 0x8004010f
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:03:12 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:03:16 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 08:03:16 [email protected]: UploadItems: 1 messages to send
2014.05.23 08:03:16 EXECUTING Put MAPI TASK
2014.05.23 08:03:17 Starting the Spooling Cycle
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:17 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 08:03:17 Sending one message
2014.05.23 08:03:17 Progress: Sending message 'Accepted: TP - Hold PE Call ' (size 5.70 KBytes)
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:17 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 08:03:17 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 08:03:17 FINISHED MAPI TASK
2014.05.23 08:03:17 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:03:17 [email protected]: Synch operation completed
2014.05.23 08:03:17 Sending done, Error code = 0x00000000
2014.05.23 08:03:17 Sending done, Error code = 0x8004010f
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:03:17 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
2014.05.23 08:04:08 Starting the Spooling Cycle
2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 636
2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 637, size unknown)
2014.05.23 08:04:08 Downloading one message
2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:08 FINISHED MAPI TASK
2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 Starting the Spooling Cycle
2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 706
2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 707, size unknown)
2014.05.23 08:04:08 Downloading one message
2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:08 FINISHED MAPI TASK
2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 EXECUTING EndSession MAPI TASK
2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 636
2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 637, size unknown)
2014.05.23 08:04:09 Downloading one message
2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:09 FINISHED MAPI TASK
2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:09 [email protected]: Synch operation completed
2014.05.23 08:04:09 EXECUTING EndSession MAPI TASK
2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 706
2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 707, size unknown)
2014.05.23 08:04:09 Downloading one message
2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:09 FINISHED MAPI TASK
2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:09 [email protected]: Synch operation completed
They are using a CRM client 2011 (Server is CRM 2011 - on premise) as well as having other connected email accounts - managed accounts, like Accounting or HR, etc.
What can I look for / provide for you all to assist? I am almost ready to open a ticket with Microsoft to resolve this as it has been happening for multiple users for multiple weeks.
When "I" go in, logged on as myself, I do NOT have this problem, however my account is not "old" in that I just logged onto the account domain\matthew.carter, where these users use their accounts day in and day out for weeks / months
/ (some years).
Thank you!Did you post this in the SharePoint Section? Did you find a resolution for this?
We are experiencing the same issue and have yet to find anything to resolve this issue.
Regards, Daniel
I ended up scouring his old posts looking for the other thread, and he did open one in the SharePoint forum:
https://social.technet.microsoft.com/Forums/office/en-US/3dded85b-73ee-47dc-9609-6ee65f329983/outlook-the-path-specified-for-the-file-sharepoint-lists-pst-is-not-valid?forum=sharepointadminprevious#3dded85b-73ee-47dc-9609-6ee65f329983
Unfortunately, what was marked as an "answer" by the moderators isn't really an answer at all to the problem. We are experiencing pretty much an identical issue with a calendar people are adding to Outlook 2010 from SharePoint 2010 within a XenApp
server (using roaming profiles). However, we have not had the issue occur outside of XenApp yet. -
Right, so I have a windowsform with lots of Textboxes, where the user can type in Information, and then hit "Save", once its saved it goes into a sortof XML Format
<?xml version="1.0" encoding="utf-8"?>
<!--Database-->
<Case>
<Person>l<Driver></Driver><License-Holder></License-Holder><Address></Address><Phone></Phone><Date-of-Birth></Date-of-Birth><Registration></Registration>
Like that.
Now, on my Startup Form (The main form) there is a Listview that I gave the name Objectlist1. This list displays ANY file located in a specific folder on my computer. This is also where the Saved files appear.
The list also updates every 5th second so after you save it appears quickly.
Now, the Files are saved using the content or Value of the first Textbox:
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Firsttextbox.Text, settings)
So it appears in the folder and on the list with the value inserted in the first Textbox.
My problem comes when I want to load this back (Or reverse the function if you will)
Where I can go to the Objectlist1/Listview, either doubleclick a file or Mark a file, and hit my button "Retrieve"
I want the Form where you could input all the values to show - which it does
And the information from the XML/File saved to appear where it once was typed or inserted.
Here is an example of the code used to save the values from the Textboxes;
Private Sub Savebutton_Click(sender As Object, e As EventArgs) Handles Savebutton.Click
If IO.File.Exists(Pholderbox.Text) = False Then
Dim settings As New XmlWriterSettings()
settings.Indent = True
Dim XmlWrt As XmlWriter = XmlWriter.Create("C:\Users\USER\Desktop\TESTFOLDER\" + Pholderbox.Text, settings)
With XmlWrt
' Write the Xml declaration.
.WriteStartDocument()
' CLIENT
' Write a comment.
.WriteComment("Database")
' Write the root element.
.WriteStartElement("Case")
' Start our first person.
.WriteStartElement("Person")
.WriteString(Textbox1.Text)
' The person nodes.
.WriteStartElement("Driver")
.WriteString(Textbox2.Text)
.WriteEndElement()
I've tried multiple codesamples but they all give either "XML Not found" or such Overloads.
This is the current code I used when trying to make it work
Private Function ReadSettingsXML(ByVal path As String) As MySettings # On Debug It marks here and tells me it wasn't found.
Dim thisSettingsInfo As New MySettings
If My.Computer.FileSystem.FileExists(Objectlist1.SelectedItems.ToString) Then
Dim settingsInfo = XElement.Load(Objectlist1.SelectedItems.ToString)
If settingsInfo IsNot Nothing Then
For Each mainGroup As XElement In settingsInfo.Elements
If mainGroup.Name = "<Database>" AndAlso mainGroup.HasElements Then
For Each subGroup As XElement In mainGroup.Elements
If subGroup.Name = "<Person>" Then
thisSettingsInfo.Textbox1 = subGroup.Value
ElseIf subGroup.Name = "<Driver>" Then
thisSettingsInfo.Textbox2 = subGroup.Value
ElseIf subGroup.Name = "<Address>" Then
thisSettingsInfo.Textbox3 = subGroup.Value
End If
Next
End If
Next
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file is corrupt and cannot be read.")
End If
Else
thisSettingsInfo = Nothing
Throw New Exception("The settings XML file could not be located.")
End If
Return thisSettingsInfo
End Function
Private Sub LoadXML_Click(sender As Object, e As EventArgs) Handles LoadXML.Click
Dim settings As New MySettings
settings = ReadSettingsXML(Objectlist1.SelectedItems.ToString)
If settings IsNot Nothing Then
Dim sb As New System.Text.StringBuilder
With settings
Caseworker.Textbox1.Text = .Person
Caseworker.Textbox2.Text = .Driver
Caseworker.Textbox3.Text = .Address
End With
End If
End Sub
Also, the "Caseworker" is the form where all the textboxes are located.
Been stuck on this for two working days, so any help is highly appreciated
Codesamples are also highly welcome so I can see what the heck you did and find and answer to my problems.I found a code that might be close to what I'm looking, but as of this code used here, it looks for a static document that already exist and is located in the code.
See this one here, checks for the XML file, and since I can't link one program to 1 file, when its gonna have and use 100's of files.
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
While (document.Read())
Dim type = document.NodeType
'if node type was element
If (type = XmlNodeType.Element) Then
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
End If
End If
End While
Am I at least close here, people?
Can anyone help with the now critical issue I got?
I basically need to change these two;
If (IO.File.Exists("MyXML.xml")) Then
Same here with the static document.
Dim document As XmlReader = New XmlTextReader("MyXML.xml")
To whatever value, so they read from the file SELECTED in my Listview
Cos the program saves files according to the info inserted in textboxes, so it can have whatever name you can think of, I need the program to "find and load" that file, once its selected, and then once I hit Retrieve or LOAD or whatever button, it
injects the info from the File to the correct Textboxes.
And I think this will work to get the info in the right boxes;
If (document.Name = "FirstName") Then
TextBox1.Text = document.ReadInnerXml.ToString()
End If
If (document.Name = "LastName") Then
TextBox2.Text = document.ReadInnerXml.ToString()
Any good advise? I'm stranded here. -
Select List Performance Issue in Apex 3.1.2
Hi
It would of great help if you could suggest us for the following
We are facing some issues in Select List performance in Apex 3.1.2 version.
We have 6 select list and all have been cascaded i.e., values of each select list based on pervious list value.
Values in each select list are huge. Because of this, the performance is very slow.
It takes huge time to fetch the data based on other list values.
We cross verified in backend, the same query takes less time compared to the Application.
Any recommedation to fine tune this?
Thanks in advance
Vijayif your select lists are very huge then it could be the browser that is causing the slow down.
try and create an example using a static HTML file containing a select list of the same size and you may find the same performance issue.
a quick way to create the test would be to save the source of your APEX page as a html file
Craig
[http://www.oracleapplicationexpress.com] -
Apex 3.2 group select list
Hi,
I just want share this if you are still in older version of Apex and you use jQuery.
I did made "plugin" for grouped select list
See sample here
http://actionet.homelinux.net/htmldb/f?p=100:86
Plugin source
;(function(){
jQuery.fn.htmldbLovOptGrp=function(o){
var t=jQuery(this);
o=jQuery.extend({
sessionValue:t.val(),
nullShow:false,
nullValue:'%null%',
nullDisplay:'%',
lovProcess:undefined,
lovGrpLabel:'GRP',
lovDisValue:'DIS',
lovRetValue:'RET',
loadingTxt:'Loading ...',
loadingCss:{'width':'80px'}
},o);
return lCreSelect(t,o);
jQuery.htmldbAjax=jQuery.fn.htmldbAjax=function(opt){
jQuery.ajaxSetup({
url:'wwv_flow.show',
dataType:'HTML',
traditional:true,
cache:false,
type:'POST',
data:{
p_flow_id:jQuery('#pFlowId').val(),
p_flow_step_id:jQuery('#pFlowStepId').val(),
p_instance:jQuery('#pInstance').val()
return jQuery.ajax(opt);
jQuery.htmldbJSON=jQuery.fn.htmldbJSON=function(opt,callfn){
return jQuery.htmldbAjax({dataType:'json',data:opt,success:callfn});
function lCreSelect(t,o,j){
t.empty().hide().parent().append(jQuery('<div/>').html(o.loadingTxt).addClass('ui-autocomplete-loading').css(o.loadingCss));
jQuery.htmldbJSON(jQuery.extend(j,{p_request:'APPLICATION_PROCESS='+o.lovProcess}),function(jd){
if(o.nullShow){lAppendOpt(t,null,o.nullDisplay,o.nullValue);}
jQuery.each(jd.row,function(i,d){lAppendOpt(t,d[o.lovGrpLabel],d[o.lovDisValue],d[o.lovRetValue]);});
t.val(o.sessionValue).trigger('change').show().parent().find('div.ui-autocomplete-loading').remove();
return t;
function lAppendOpt(t,l,d,r){
var o=lCreateOpt(d,r);
if(l){
var g=lGetOptGrp(t,l);
if(g){g.append(o);}
else{t.append(lCreOptGrp(l).append(o));}
}else{t.append(o);}return true;
function lExists(p){return(p.length==1);}
function lCreateOpt(d,r){return jQuery('<option/>').val(r).html(d);}
function lCreOptGrp(l){return jQuery('<optgroup/>').attr({'label':l});}
function lGetOptGrp(t,l){var g=t.find('optgroup[label="'+l+'"]');if(lExists(g)){return g;}else{return false;}}
})();Copy code and save it to file e.g called jquery.htmldbQuery.js and upload it to workspace Static Files.
Create new page and blank HTML region.
Create select list with LOV query
SELECT null d, null r FROM dualCreate On Demand application process called GET_GRP_LOV like
DECLARE
l_sql VARCHAR2(32700);
BEGIN
l_sql :='
SELECT mgr AS grp,
ename AS dis,
empno AS ret
FROM emp
APEX_UTIL.JSON_FROM_SQL(l_sql);
END;Place to page HTML header
<script type="text/javascript" src="#WORKSPACE_IMAGES#jquery.htmldbQuery.js"></script>
<script type="text/javascript">
$(function(){
$('#Px_MY_SELECT').htmldbLovOptGrp({lovProcess:'GET_GRP_LOV'});
</script>Where Px_MY_SELECT is your select list name.
As I did say this need you also load jQuery. Apex 4 have jQuery , but if you are on later version see e.g. this blog post
http://www.oracleapplicationexpress.com/tutorials/66
I hope this helps someone
Br,Jari
Edited by: jarola on Aug 17, 2010 8:44 PM
Same thing seems to be work also with Apex 4.0
http://apex.oracle.com/pls/otn/f?p=40323:50
But if I have understand correctly Apex 4.0 have some build in or better thing to get same result
Edited by: jarola on Aug 17, 2010 10:54 PM
copy&paste mistake corrected
Edited by: jarola on Aug 18, 2010 12:57 AM
I hope editing post all the time is ok =).
I have not test this on any other browser than Fire Fox, so all comments are welcome.
Also I have try create similar plugin for cascading lov. Sample here
http://actionet.homelinux.net/htmldb/f?p=100:85
Maybe there is this kind plugins already for Apex 3.x, I have not just seen.
Also I'm beginner with jQuery so all help and comments is needed
Edited by: jarola on Aug 18, 2010 2:01 AM
mistake in guide corrected.Hi Matt,
which version of APEX are you currently on?
With ApexLib Framework you can have cascading select lists in normal forms, but not in a Report or Tabular Form. Also refreshing a Report when changing a select list doesn't work out of the box. You would need to add some javascript. But i think this isn't what you wanted.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at -
LOV single selection list is not working in my JDeveloper 10.1.2.3
Hi!
I'm stumped with this. I'm also new to JDeveloper. I used the sample tutorial from the OTN website entitled "JSPDataBoundLists.jws" to learn how to create drop-down lists in JDeveloper.
My problem is I created a single selection list LOV from DepartmentListView Data Control and pasted it into an EmployeesView Input form. This is so I can just select the Department names to populate the DepartmentID field in Employees table. I setup the data binding in the UI Model of my jsp using the "List Binding Editor". I checked the UIModel file and it looks as follows:
<DCControl
id="DepartmentId2"
SubType="DCListSingleSel"
IterBinding="EmployeesViewIterator"
DTClass="oracle.adf.dt.objects.JUDTCtrlListLOV"
ApplyValidation="false"
isDynamic="false"
ListOperMode="0"
ListIter="DepartmentsListViewIterator" >
<AttrNames>
<Item Value="DepartmentId" />
</AttrNames>
<ListAttrNames>
<Item Value="DepartmentId" />
</ListAttrNames>
<ListDisplayAttrNames>
<Item Value="DepartmentName" />
</ListDisplayAttrNames>
</DCControl>
I run the jsp, selected a value from the drop-down list, do a submit and do a commit, but the DepartmentId from the DepartmentsListView was not stored in Employees. What is wierd here is that there is an exact same single selection list defined a row above mine which is working fine. How come that one is working and mine is not?Eureka! I finally found the answer to my own question!
This simple problem of adding a drop-down list into a jsp page cost me 3 whole days (around 24 full working hours) to find the answer. Normally it only takes me a few minutes with the other web app languages I've learned. And I just stumbled into the answer just a few minutes ago (maybe all thanks should be given to God whom let me stumble into the answer since me and my wife have been praying for several weeks now ever since I started trying to learn Oracle JDeveloper. It is really very very difficult and time consuming to learn compared to other web app languages and tools).
Anyway, the reason why my LOV does not work in my jsps using JDeveloper 10.1.2.3 is because JDeveloper 10.1.2.3 seems to allow only one input-form-element for the same field of the input table!
For example, what happened to me was I had an input form created for the Employees table in the HR schema. I did this simply by drag-and-drop from the "Data Control Palette". This feature I like very much with JDeveloper. It is really easy and works instantly. And then, I drag-and-drop the departmentname field from the Departments table as a "single selection list" into the jsp and setup its bindings. So when I run the jsp, viola! The drop-down list does not populate the DepartmentId field of the Employees table. IT DOES NOT WORK! I've tried reinstalling both JDev and Oracle db and JDKs to no avail! I tried posting in this forum to no avail! I tried experimenting with newly created jsps to no avail! Then suddenly after repeatedly experimenting on this on different tutorials, guides and my own web app, it works! Why did it work? It was because I tried to add an LOV-single-selection-list on another sample tutorial with a READ-ONLY FORM on the jsp! Thus only the LOV is the input-form-element in the jsp for the table's field.
So why can't you find such a simple and basic fact anywhere in the web, the tutorials, guides or the forum? I do not know. Maybe only I am using such an old version of JDev? But what about the users who used it when it just got out a couple of years ago? Didn't they have the same problem? Anyway, it seems like the answer to a lot of my simple basic questions about JDeveloper is not documented, or is buried very deep beneath all the other words of all these documents. Hopefully JDeveloper's documentations would get a lot easier to use very very soon! -
Dynamic Select List not displaying correct value
Hi there!
I have a page with a dynamic repeat region.
As I press one record I get up all the details based on id on an edit page.
The problem is that the info that is inserted via a Select List is not displaying correct on edit page.
All the other values are correct, also the values in the repeat region on index page,
but the value from the Select List on edit page is just displaying the initially selected item.
Have tried using SELECT DISTINCT in the SQL statement, but no luck.
Any other ideas?
Cut and paste from form:
<select name="Vegtype" class="ProvDet" id="Vegtype" title="<%=(rsAs.Fields.Item("VegType").Value)%>">
<option value="Ev" selected="selected">Ev</option>
<option value="Fv">Fv</option>
<option value="Rv">Rv</option>
<option value="Kv">Kv</option>
</select>
Recordset
<%
Dim rsAs
Dim rsAs_cmd
Dim rsAs_numRows
Set rsAs_cmd = Server.CreateObject ("ADODB.Command")
rsAs_cmd.ActiveConnection = MM_LabCon_STRING
rsAs_cmd.CommandText = "SELECT DISTINCT DatoM, DatoR, DatoU, Distr, FagFelt, Felt, IntNr, Km, KontrNr, Kontrollor, Masse, MasseBK, Punkt, Resept, TestID, UserID, VegHp, VegNavn, VegNr, VegType FROM tblTest WHERE TestID = ?"
rsAs_cmd.Prepared = true
rsAs_cmd.Parameters.Append rsAs_cmd.CreateParameter("param1", 5, 1, -1, rsAs__MMColParam) ' adDouble
Set rsAs = rsAs_cmd.Execute
rsAs_numRows = 0
%>
Regards,
Christian
DWCS5 | .Asp | MS AccessOk, here goes the top down approach...
In the HTML header of my page, i have this reference to a js file containing the javascript - <script src="#WORKSPACE_IMAGES#108.js" type="text/javascript"></script>
Then in an HTML Region I have the following code to create the divs that will be shown and hidden - <div id="divREGION" class="divs">Select region to get list of countries.</div>
<div id="divCOUNTRY" class="divs">Select country to get list of cities.</div>
<div id="divCITY" class="divs">Select city and then press "Get Employees". </div>
Note that these divs contain static content. You may be able to create dynamic content for these divs by creating dynamic query regions and putting div tags around the region (i havent tried this, it may require template modification).
The select boxes have this code in the "HTML form elements attributes" - onFocus="javascript:showHideDiv(this,true)" onBlur="javascript:showHideDiv(this,false)"
This onFocus and onBlur call the showHideDiv() function, passing in the object reference of the select box and a true/false to show/hide the related div.
The actual javascript function that is contained in the 108.js file is:
function showHideDiv(objThis, inBool){
var divid = "div" + objThis.id.substring(3);
if (inBool) {
ShowDiv(divid);
else {
HideDiv(divid);
That function in turn calls either the ShowDiv() or HideDiv() functions, depending on the true or false, passing in the ID of the div to be changed...
function ShowDiv(divid){
eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "inline"');
function HideDiv(divid){
eval('document.all'+ '["' + divid + '"]' + '.style' +'.display = "none"');
Hope this helps. -
Select lists - remember values after submit not working in IE7
I have two dynamic select lists that are populated using .csv
files.
On submit, a set of results is returned based on the two
options that were chosen.
In IE7 when the results are returned the select lists default
back to the last option in the select list. I would like it to
default to what ever option was just chosen.
I'm using the code below and it works as I would like it to
in both Firefox and Safari, but just defaults to the last option in
the list for IE7.
The variable "actualLitType" is pulled from the URL and
should be part of the id of the selected option.
Any ideas why it doesn't work like I would like it to in IE7?
Thanks in advance,
JesseI posted this in another forum and received an answer that
fixed the issue. See the link below for more information:
http://www.dynamicdrive.com/forums/showthread.php?t=35473 -
How Can I Make a Text File that Lists Files in a Finder Folder?
I would like to email lists of files in my various Finder folders. I have Mac OS X (10.4.6). Finder works nicely, but I cannot figure out how to save a list of file names. Can I get advice? Thank you.
I'd like to thank "roam" for the link http://www.searchwaresolutions.com which opened a site for "printwindow" for Mac OS. Wow!! That was easy! It's a free download for the standard product which luckily worked for me. After downloading PrintWindow, and putting it in my Applications and reading PDF instructions, I opened PrintWindow and clicked "File". Then I chose "Print Folder Listing", clicked that and see "Print Listing" of all my Mac's folders. Then, I selected the folder for which I wanted the file names listed on paper. Then it opens a Print Options menu. I clicked Print. Then, a "Page Setup" menu appears. I clicked "OK". Then a "Print" menu appears. On the "Print" menu, there is a PDF options menu!! On that, there is a "Save as PDF"!! I clicked "Save as PDF" and then there is a small "Save" menu where I typed a new file name and the folder in which I wanted the listing saved. It worked! Thank you.
-
I try to publish my book create with ibooks author( with publish button) and in delivery(using itunes producer) process a itms-9000 errror cancel the whole thing. To be accurate a big list of itms-9000 errors which contains the message:
ERROR ITMS-9000: (name of my file).ibooks: the book asset contains files not listed in the OPF manifest: (name of my file).ibooks:/OPS/assets/widgets/?????????-1/???????.c3d or dae or jpg.
Does anyone had the same problem or can anyone help me to fix this issue???. thank you.Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams
Maybe you are looking for
-
Unable to load class from JSTL
Hello. I am using JSTL 1.06 from Jakarta with Tomcat 4.1 on a MacOS X 10.3.9 server. I have a jsp that contains the following: <%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %> <jsp:useBean id="validate" class="mypackage.ValidationBean" sc
-
When I try to sync my IPOD (3rd gen) on ITunes, I receive the following error message - you don't have enough access permissions to perform this operation..can anyone assist?
-
I would like to be able to call someone in Morocco from my landline with a Skype number. Morocco does not appear on the list.
-
Dimension out of synch with relational table
Hi Gurus, We have an issue of Dimension Loading in OWB10grel2. My Dimension DPROD Details are as below.. Storage :star SCD type:1 Levels : Lev1,2,3...15 with each level having ID,CD,DESCR as level attributes. Hierarchy: prodlev1,prodlev2....prodkey A
-
IDOC trigger for changes in condition records
Hi Guru's, I want to trigger IDOC every time I create a condition record and every change in condition record. can you suggest me how to trigger IDOC COND_A01 in above scenarios. Thanks in advance. Suresh