File to ABAP proxy via AAE

Hi All
Am doing a file to ABAP proxy scenario and using SOAP adapter(XI protocol 3.0) at target side in order to make use of AAE.
But while testing am getting the following error at both the channels(file and soap) :
Error Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out.
SOAP channel configuration :
Target URL : http://X.X.X.X:8001/sap/xi/engine?type=entry
Logon language : en
X.X.X.X being the IP address of the target system which is BW.
Appreciate any help.
Regards
Soumen

Re-Iterating my 1st post : Am using SOAP( Message Protocol : XI 3.0 ) as I want to make use of the AAE. XI adapter is not supported by AAE.
Followed this : http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?quicklink=index&overridelayout=true
Anyways, found out I was having some error in teh IP I was using ...corrected it and now my error is changed to :
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden
Now since my source is File which goes through mapping, what do I need to do for this error?

Similar Messages

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

File to ABAP Proxy (problem with inbound queues in R3)

Hi,
In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?

Hi,
Please check the program code for Server ABAP proxy.
This will show you the trigerring of Proxy on inbound side.
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
Thanks
swarup

File to ABAP Proxy(ProductActivityNotification_In)

Hi All
I have to develop one scenario for Flat File to ABAP Proxy (ProductActivityNotification_In).
I am going to use Receiver File Adapter(to receive file in PI) and Reiver XI adapter(to send file to SNC proxy ProductActivityNotification_In)
I am new to XI please let me know how to approach to this solution.
What could be the design steps I need to consider?
Do I Need to use content conversion?
Can I use graphical mapping?
Thanks for your inputs.
Regards
Amol.

Hey,
You need to import the SNC standard content in XI.
This will provide you with the Proxy interface.
Then you need to do certain settings on the SNC server.
R3 side
SLDCHECK
Use this transaction to access the SLD of XI.
SLDAPICUST
Create an entry for respective XI server
requires hostname, port username and ip.
Can have multiple enteries for different servers.
But you can check only one entry.
based on the entry that is checked, respective SLD API will be triggered from
SLDCHECK.
SM59 (T type connections).
To connect to the SLD you need 2 types of TCP/IP connections.
1)LCRSAPRFC:-
      In this you require the gateway host(ip address) and gatewayservice(sapgw[system no.])
      YOu also need to give Program ID.
      Entry of corresponding Program ID must be maintained in SMGW.
      IN SMGW Click GoTo->logged on Clients.
      If entry is not there for corresponding XI.
      Create a communication channel in XI, pointing to R3 and give a Program ID
      in the channel. Once the channel is activated, corresponding Program ID wil
      appear in SMGW.
2)SAPSLDAPI:-
     In this case follow the same porcedure as for LCRSAPRFC.
   As far as the Program ID is concerned te procedure mentioned above is for
   Customized RFC's
   The RFC destinations mentioned here are both standard RFC's
   Hence for these two RFC's no need to Create Program ID's. you just need to
   change the System ID of the Program ID.
   Both these RFC's are maintained in the J2ee server of XI.
SPROXY.
   In this transcation you can check the Proxies.
   If the proxies are not activated (i.e. if the message interfaces are not active)
   then you need to maintain one G type RFC destination pointing the resepctive XI server.
   In the G tpye RFC destination give the Ip adress of the XI server in the target
   host and set the path prefix as /rep.
   Goto SPROXY->Goto->connection test-> click on the table SPROXSET.
   In this table maintain enteries for ADDRESS_ONLY_FROM_SPROXSET and IFR_HTTP_DEST
   The values corresponding to these enteries will be the G tpye RFC destination.
In order to connect R3 to the Integaration server you need to maintain H type
The default RFC is XI_INTEGRATIONSERVER. In you need to give the Target host entry as the
Ip address and Path Prefic as.../sap/XI/engine/?type=entry (this you can get from SXMB_ADM of XI)
You can also create the H type RFc of your own.
goto SXMB_ADM(r3) and open Integration engine configuration.
Goto edit->change global configuration and give the RFC dest name like this:-
Corresponding Integration server:- dest://{h-type rfc destination}
If you do not want to create RFC destination you can directly give
the Integration server address(that you can obtain from SXMB_ADM of XI) in the
Corresponding Integration server field.
This is to activate the communication between SNC and PI.
now you need to create the file structure in XI.
the next step is to do the mapping between the file structure and the appropriate interface
As yours is a flat file you need to do a file content conversion
In Integration directory you need to configure two channels one for File and the other one for Proxy.
regards,
Milan

File to ABAP proxy with EOIO

Hi Experts,
I am working on File to ABAP proxy scenario. The requirement is to have EOIO from end to end.
Which means the files have to be sent to target system (R/3) in the same order as they are placed in the file location. I have two questions regarding this.
1. Do I have to create 2 queues, one in PI and one in R/3 to acheive this? In File Sender CC we have option of specifying queue name but in XI Receiver CC, I do not see such option. How to handle this?
2.For picking the files from folder if I use NFS, then I have option of specifying 'Processing Sequence' as 'By Date' to pick the files based on timestamp. But if I am using FTP, how can I make sure that the files are sent to Integration engine based on timestamp?
Please provide your valuable inputs.
Thanks and regards,
Prasad

Hi,
1. Do I have to create 2 queues, one in PI and one in R/3 to acheive this? In File Sender CC we have option of specifying queue name but in XI Receiver CC, I do not see such option. How to handle this?
1 queue is okay. Just specify it in the Sender File CC.
2.For picking the files from folder if I use NFS, then I have option of specifying 'Processing Sequence' as 'By Date' to pick the files based on timestamp. But if I am using FTP, how can I make sure that the files are sent to Integration engine based on timestamp?
Processing Sequence is not supported for FTP and is only for NFS.
If you have to use processing sequence, then do an FTP, bring the files to an NFS directory and then use the processing sequence accordingly.
Hope this helps.
Regards,
Neetesh

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

File -- XI -- Abap proxy Que lock

Hi all,
My scenario is file --> XI --> Abap proxy, for some strange reason the message always gets locked on R3 side. So, in the monitor of XI the message is processed succesful BUT in the monitor of R3 we always have to unlock (que) the message manually before he executes the proxy. Isn't there a way that we don't have to unlock the message manually before executing the proxy?
TIA

Have you registered and activated the queues?
Transaction sxmb_adm -> Integration Engine-> Administration -> Manage Queues.
Cheers
Manish

SAP XI- File to ABAP Proxy scenario

Hi SDN,
I have a FILE to ABAP proxy scenarioin SAP+XI can you guide me how to procede in that, what should be my ESR and ID objects and how to use the sproxy transaction.
Regards,
Aniruddha Bhattacharya

Hi,
please check out the search option on SDN forum first - there are tons of blogs with step by step on the same
come back with more detailed questions ok ?
thank you,
Regards,
Michal Krawczyk

I want to test sender ABAP proxy in AAE by SOAP client

To PI Specialists
Now I plan to test sender ABAP proxy in AAE by SOAP client system.
(we use aae so we set sender abap proxy by sender soap adapter.)
ABAP creating team and PI creating team are in other site.We cant contact easily.
I want to separate ABAP Unit test and PI Unit test, plan to use soap client for test driver.
(we use SOAPUI. )
the url is http://<host>:<port>/XISOAPAdapter/MessageServlet?channel=party:service:channel
I noticed that sender soap adapter is started, but the messeage protocol is invalid.
we use messege of wsdl. it must be XI3.0 protocol.
Please tell me XI3.0 protocol.
Naoki

This is possible to do in SOAPUI. I am testing this scenario using AAE, but I am also using SOAP UI Pro. The procedure is pretty basic. Instead of sending your payload in as part of the body, you have to send it in as an attachment. You will also need to set the header correctly. Here is a sample message from my SOAP UI tests that may help. The only thing you need to do differently is load the attachment, name it, and make sure that the name of the attachment is reflected in the SAP:Payload attribute. Also, I am using a Groovy script to create a GUID.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
<soapenv:Header>
<SAP:Main versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92FFF13F5C59777FE1ABE00000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
   <SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
   <SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
   <SAP:MessageId>${Create GUID#result}</SAP:MessageId>
   <SAP:TimeSent>${=new java.text.SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'Z'").format(new Date())}</SAP:TimeSent>
   <SAP:Sender>
    <SAP:Service>SVCNM</SAP:Service>
   </SAP:Sender>
   <SAP:Interface namespace="Interface_Namehttp://namespace.com">Interface_Name</SAP:Interface>
</SAP:Main>
<SAP:ReliableMessaging SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
<SAP:System SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SAP:Record namespace="http://www.sap.com/webas/712/soap/features/runtime/metering/" name="CallingType">SA</SAP:Record>
</SAP:System>
<SAP:Diagnostic SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SAP:TraceLevel>Information</SAP:TraceLevel>
   <SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
<SAP:HopList SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SAP:Hop timeStamp="${=new java.text.SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'Z'").format(new Date())}" wasRead="false">
    <SAP:Engine type="BS">SVCNM</SAP:Engine>
    <SAP:Adapter namespace="XIhttp://sap.com/xi/XI/System">XI</SAP:Adapter>
    <SAP:MessageId>${Create GUID#result}</SAP:MessageId>
    <SAP:Info>3.0</SAP:Info>
   </SAP:Hop>
</SAP:HopList>
</soapenv:Header>
<soapenv:Body>
<SAP:Manifest wsu:Id="wsuid-main-92FFF13F5C59777FE1ABE00000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink"
                xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
   <SAP:Payload xlink:href="cid:TestPayload.xml">
    <SAP:Name>MainDocument</SAP:Name>
    <SAP:Description/>
    <SAP:Type>Application</SAP:Type>
   </SAP:Payload>
</SAP:Manifest>
</soapenv:Body>
</soapenv:Envelope>
Here is a picture of my SOAP UI project in case it help the understanding.

Proxy via AAE

Hi Experts,
Any pointers on prerequisites checks to be done for configuring receiver proxy SOAP 3.0 in integrated configuration for message flow through AAE?
I have a scenario for direct message send to ECC from JMS queue. I thought to use IC in AAE by creating JMS sender channel and SOAP 3.0 receiver channel to connect ECC.
Thanks
Ray.

Hi,
I am able to post the messages from File/SOAP to ABAP Proxy [SOAP XI3.0] via AAE. The messages which are posted are able to monitor in RWB.
However, when I was trying to make the scenario ABAP Proxy [SOAP XI3.0] to File via AAE, the message from ECC is flowing to integration engine which is not expected since I have configured the message flow to happen via AAE only.
I have configured the following:
a) SM59--> G type connection for AAE destination with path prefix as" /XISOAPAdapter/MessageServlet?ximessage=true"
b) SXMSIF--> Sender ID has been defined with service and component as " * " and selected the required outbound service interface and namespace from the list
c) SXMB_ADM--> WIth category as RUNTIME, parameter as IS_URL and subparameter as Sender ID, current value is configured as dest://<http destination of AAE>
d) For the outbound service interface, an outbound proxy is generated in ECC for message triggering.
e) Sender channel was configured as SOAP with message protocol XI3.0. The module tab was configured with prameter: ignoreDuplicate=true and generateSysAck-true for XISOAPAdapterBean module.
f) The integrated configuration was done with sender soap channel and file receiver.
When message was triggered from ECC, it went to Integration engine and failed with red flag. The error trace read like this.
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I was expecting the message in RWB and when I checked the channels, there is no trace of the message and the channel is inactive.
Please let me know where I am missing...
Thanks!
Ray..

BPM file to ABAP proxy

HI all
I´m developing a BPM, this has the following steps:
1º
Reciver Step: this is to read a file , comunication channel type file.
2º transformation Step: maps the MT of the file to a new MT
3º Send step: send syncronously the result of the the map.Using an ABAP proxy. XI adapter.
4ºSwitch step: compares de the value of the result of the syncronous call, with a constant.First branch Send Step to write a file
Second branch nothing.
My question is? Do i have to insert something before the switch. Because i cannot activate the BPM, In the SXI_CACHE i can see and error that says that the value that i´m using to compare the value it is not an object of the payload.
Any idea?
Many thanks
Noelia

Hi,
Last try...
salida_proxy./p1:MT_salidaproxy/row/valor = 0
In the condition editor:
When you do a f4 for the left operanfd text box:
The expression editor opens:
You need to click on the "Interface Variable" radio button and select your container salida_proxy and prove the correct xpath.
Make sure that the Type specified next to the xpath in the expression editor is String.
A f4 in the right operand text box opens a expression ediote, where:
You need to click on the constant radio button, and provide the constant 0.
Again make sure that the xsd trype is String.
In case all this has been done perfectly, then try deleting the switch and recreating it again. You never know, this might do the trick!
Regards,
Smitha.
Message was edited by:
Smitha Rao

File to Abap Proxy Scenario : No message log in SXMB_MONI

I have a PI Scenario in which a FTP server is polled every 5 minutes, and when it receives any file, file is archieved and abap proxy is called. Few days back it was running perfectly fine. But For last couple of days I am facing strange error.
My File is archived but abap proxy isnot called, neither I get any message in SXMB_MONI.
any guesses what should I do?
Jawed Ali

Hi Jawed,
HOLD means you have given QoS as EOIO in sender channel and the first message got failed and hence all messages are waiting..
Check this thread
Re: PI 7.1 Messages stuck into the Queue of the Adapter Engine
Try resending the messages through runtime workbench->message monitoring->adapter engine
Regards
Suraj

File to ABAP proxy as attachment

Hello PI expert,
I have requirement to FTP file from FTP server to ECC server. But because of some security, we can not get FTP permission on ECC server.
What i want to do is, get the file from FTP server as it is, and send it using abap proxy as attachment. I don't want to do any content conversion or xml conversion because I want to transfer file as it is.
Any suggestion.
Thanks,

Hi,
if your PI version is at least "SAP NetWeaver PI 7.1 SP3"
create sample Data type structure with one node and one field, and use this for both proxy and file service/message interfaces.
Pick the file from FTP. No graphical mapping. Use Java Mapping. Read the input stream and create an attachement from this and attach it to the message. pass some static values for the output (proxy) structure using output stream. Thats all.
http://help.sap.com/javadocs/pi/SP3/xpi/index.html
Methods:-
com.sap.aii.mapping.api --> OutputAttachments --> create(String contentId, byte[] content) / create(String contentId, String contentType, byte[] content)

Performance problem in File to ABAP Proxy scenario

Hi gurus,
    I have a scenario where the sender is sending a file and the receiver is ABAP Proxy.The file is a simple DAT file containing banking data.The file sample is as belo
00000MM21901 PYM0901021531
704401020100005510000040000D0002
704401020127147391000033500D0003
704401020127147391000045000D0004
704401020109341157000038800D0005
70420!!!!10200000182174D
704401021100006040000015158D0001
704401021100006040000005034D0002
7042010210000020192D
The above file need to be split and mapped to the fields of the ABAP Proxy after doing some validations.
Is Receiver Determination using mapping required? What is the most efficient way of splitting the file?
Please give your replies keeping better performance of the interface in mind.What is the best way of doing the validations?
regards
Debansu

Hi Satish,
    As you can see in my question above,the sender side contains a flat file(the file format is given in the question),I need to split the file into strings which can then be mapped to specific fields of the ABAP Proxy.A sample output of the xml file that is passed on to the ABAP proxy after mapping transformations is given below:
<BATCH_TOTAL_RECORD_420>
<BATCH_REPORT_DISTRICT>70</BATCH_REPORT_DISTRICT>
<KEY_VALUE>420</KEY_VALUE>
<BATCH_NUMBER>1021</BATCH_NUMBER>
<BATCH_TOTAL>0000020192</BATCH_TOTAL>
<FILLER_BATCH_TOTAL_SIGN>D</FILLER_BATCH_TOTAL_SIGN>
<FILLER />
</BATCH_TOTAL_RECORD_420>
- <BATCH_TOTAL_RECORD_420>
<BATCH_REPORT_DISTRICT>70</BATCH_REPORT_DISTRICT>
<KEY_VALUE>420</KEY_VALUE>
<BATCH_NUMBER>9999</BATCH_NUMBER>
<BATCH_TOTAL>0000202366</BATCH_TOTAL>
<FILLER_BATCH_TOTAL_SIGN>D</FILLER_BATCH_TOTAL_SIGN>
<FILLER />
</BATCH_TOTAL_RECORD_420>
I hope now you can provide me some answers.
Regards
Debansu

File to custom IDOC or File to abap proxy

Hi there,
I would like to know best approach for the following scenario.
1) i have file coming from legacy system
2) On target side SAP , I have BAPI's available (Create, Save, Commit )(No standard IDOC available)
I can create Custom IDOC and call those BAPI's in Custom Function Module
or
I can use ABAP proxy and call BAPI's
What is the best way of doing this? and Is there any other way?
Thanks
Kumar

hi,
Abap Proxy is better than RFC in terms of performance.
proxy is that it always by passes the Adapter Engine and will directly interact with the application system and Integration engine - so it will and should give us a better performance.
In your case , if there want to crate idoc from scratch level then we go for proxy and proxy support large volume of data (more than 5 mb).
One more reason is RFC , the data is converted between RFC and XML in RFC adapter. In proxy XI communicates with the R/3 in native XI language (SOAP XML).

File to ABAP proxy via AAE

Similar Messages

Maybe you are looking for