File to RFC - Missing data in table parameter

Hello,
I have a file-to-rfc scenario. My RFC function contains both inbound parameters and a table parameter.
When the RFC function is called, my data is passed correctly to the inbound parameters, however the
table is empty. I have tested my mapping and it is working properly. I have also check the
payload and all the data is there including the table data.
Has anyone run across this before?
I would appreciate any help.
Thank you.

in MONI you have any error??
in the R3 side, insert this code:
DATA: i_aux type i Value 1.
While i_aux = 1.
endwhile.
execute your scenario. later go to SM50 ans look for your process and debug it. now in debug mode check wether the parameters from PI reach to RFC.
if the parameters does not reach and there no any connection problem you have configure bad your connection parameters. check wether the connection parameter of RFC adapter are rigth in ID: Client,Server
is it Clear??
Thanks
Rodrigo
Thanks
Rodrigo.

Similar Messages

How can i open a DOC or TXT file and insert the data into table?

How can i open a DOC or TXT file and insert the data into table?
I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
I'd like open DOC file and I'd like insert them into the table with same columns.
Thanks.

Use the SQL*Loader utility or the UTL_FILE package.

Missing Data in Table passed as Function Parameter

I am running a JCO server & in my handleRequest(), I am trying to get the data from the tables paased as function parameters from the SAP system.
Somehow I am not able to see any data in the tables, though the SAP system has put some data in the tables before sending.
The no. of rows in the table is 0 always on the JCO side. I tried to dunp the content of the Function & Table with writeHTML() & it shows no data too.
I am able to pass simple strings & integers, but the tables doesn't work. Can anyone tell me where might be the problem.

Hi,
I am bit confused, You are not getting the data in the Function module when you make a call from Java or the data returned by the function module is not reaching the Java side. If you are not getting the data which you pass from java in the function module then I have faced this problem before.
In that case the problem was when you pass data as table parameters to the function module you have to check the size of table parameter I was using INITIAL to check if there is any data in the table parameter. If this is the same problem may be by checking the size of the table will solve your problem.
Regards,
Sesh

File to RFC problem- data is not inserting into ztable in R3 system

Hi
i have done File to RFC scenario which picks data from flat file and inserts into ztable via RFC in R3. but while testing my scenario everything is successful in XI monitoring (Successful flag in MONI and RWB) and in auditlog message status is DLVD.
it seems to be everything successful in XI and RFC call also successful in R3 system.
but for some reason data is not inserting into table (RFC is used to insert data into ztable)
Is there any way to debug RFC call excecution in XI..?
RFC code is like this:
insert ZMM_AUTO_GR from INPUT_TABLE.
commit work.
END FUNCTION.
please advice what could be the reason not inserting into table.
Help would be appreciated.
Regards,
Rajesh

Hi Praveen,
please see audit log- from communication channel monitoring..
Receiver channel 'CC_INCA_RFC_SAPECC_Receiver' for party '', service 'R3DCLNT210' (internal name 'RfcClient[CC_INCA_RFC_SAPECC_Receiver]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=210, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=jsaha, jco.client.sysnr=00, jco.client.ashost=ausr3devdc02}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=210, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=jsaha, jco.client.sysnr=00, jco.client.ashost=ausr3devdc02}
Current pool size: 1, maximum pool size : 1
Channel History
- OK: 2008-07-28 04:32:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 04:31:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:56:56 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:49:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA
- OK: 2008-07-28 03:48:04 PDT: Message processed for interface ZAUTO_GR_STAGE_INCA

RFC fetching data from table which is not commited

Hi Experts,
               I have a query regarding commit work.Below is the RFC that i have written
FUNCTION ZBAPI_CREATE.
*"*"Local Interface:
*" TABLES
*"      IT_ZABAP_RFC STRUCTURE ZBAPI_RFC_STR OPTIONAL
*"      RETURN STRUCTURE BAPIRET2 OPTIONAL
CALL FUNCTION 'ZBO_BAPI_CREATE'
TABLES
   IT_ZABAP_RFC       = IT_ZABAP_RFC
   RETURN             = return
Break-point.
DATA lt TYPE TABLE OF ZBAPI_RFC_STR_MAIN.
CALL FUNCTION 'ZBAPI_SEARCH_RANGE'
* EXPORTING
*   IS_STR        =
TABLES
   ET_TAB        = lt
*   RETURN        =
ENDFUNCTION.
here in first RFC call i am creating a record in ZTABLE , and then at break-point
i check the ZTABLE where it does not create any record because data is not commited into ZTABLE upto this point, but just after it i have written code for fetching data from ZTABLE but i am able to get this new record in lt.
Can anybody please explain that from where this serach RFC is providing data because inside serach i am simply selecting data from ZTABLE.
Regards,
Abhishek Bajpai
Edited by: ABHISHEK BAJPAI on Jan 28, 2009 1:12 PM

Hi Thomas,
                 Thanks for reply , i checked in ZTABLE ,before search RFC call data is not there but if i commit explicitly only then it is showing data in ZTABLE. Actually my requirement is different -
I have two RFCs 1. Create 2. Search , Now from web dynpro user will call first Create RFCs but at this point it should not insert record in ZTABLE and just after it user will call another search RFC and in this search he should be able to get these newly created records.
I want to have the functionality which a user gets when working with normal database front end like SQLPLus for Oracle. In these scenarios we see that whenever user does any insert or update the data sits in the table but still it is not committed. So there he fires Select query he sees the inserted data. But if he logs off from SQL PLUS and then logs in again, and fires Select query he does not see the data as it was not committed. I want a similiar functionalty in which if user inserts the data through Create RFC and fires the Select query through Search RFC then he can see the newly Created data also even though this data is not committed.
Although if i call create RFC in update task it will not update ZTABLE but in this situation , if user will call search RFC he will not be able to get newly created records.
So my requirement is that i should be able to get those records which are not commited in ZTABLE .If you have still any doubt regarding my question then please let me know.
Regards,
Abhishek

Find out missing dates in table

Hi,
I've a table that sould have a record for day with sales info, but for some reason there are missing dates, is there any way i could find out witch dates are missing.
Table Example:
sales_date | value
2010-01-01 | 20
2010-01-02 | 30
2010-01-04 | 40
The output of the query for the example above sould return only the missing date (2010-01-03).
Thanks in advance

How about (I wouldn't use this if your concerned about speed!)...
WITH src_data
 AS (SELECT TO_DATE('2010-01-01', 'YYYY-MM-DD') sales_date FROM DUAL
 UNION ALL
 SELECT TO_DATE('2010-01-02', 'YYYY-MM-DD') sales_date FROM DUAL
 UNION ALL
 SELECT TO_DATE('2010-01-04', 'YYYY-MM-DD') sales_date FROM DUAL),
 date_table
 AS (SELECT LEVEL, MAX(sales_date) - LEVEL + 1 my_date
 FROM src_data
 CONNECT BY LEVEL <=
 (SELECT MAX(sales_date) - MIN(sales_date) + 1
 FROM src_data)
 GROUP BY LEVEL
 ORDER BY my_date ASC)
SELECT *
FROM date_table
WHERE NOT EXISTS (SELECT 1
 FROM src_data
 WHERE sales_date = my_date)Cheers
Ben

File to rfc...database tables not updated ??

Hi XI Friends..
in my File to BAPI..
it is successfully executed..and it is showing chequered glag in sxmb_moni..and also in runtime workbench it is showing success..but the database tables are not updating..
i gone thru the link.. reciver rfc adapter..
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/frameset.htm
now i am working on SP 17.
so how can i set the values in ...
Commit Control for Individual BAPI Callsand
BAPI Advanced Mode.
In the Successful RETURN-TYPE Values table, what values i have to enter that should lead to a successful execution
its Asyncronous call..
in standard BAPI ther is no commit.
please tell me ..what values in need to give to update database tables..instead of RFC wrapper..
regards
ram

Hi Friends..
i created ZRFC and in that rfc i given standard bapi and commit work..
i tested in sap ..the table is updating..
thru XI..the table is not updating...
it showing likw this..in receiver rfc adpater monitering...
Receiver channel 'CC_IN_SAP_WorkOrderCompletion' for party '', service 'SAP_ERP_DEV' (internal name 'RfcClient[CC_IN_SAP_WorkOrderCompletion]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.249.196.86}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.249.196.86}
Current pool size: 1, maximum pool size : 1
Channel History
- OK: 2006-12-19 11:12:58 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
and in messagemonitering audit log..
2006-12-19 11:12:58 Success Message successfully received by messaging system. Profile: XI URL: http://dcexi0602.alcan.com:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSERDGX
2006-12-19 11:12:58 Success Using connection AFW. Trying to put the message into the receive queue.
2006-12-19 11:12:58 Success Message successfully put into the queue.
2006-12-19 11:12:58 Success The message was successfully retrieved from the receive queue.
2006-12-19 11:12:58 Success The message status set to DLNG.
2006-12-19 11:12:58 Success Delivering to channel: CC_IN_SAP_WorkOrderCompletion
2006-12-19 11:12:58 Success RFC adapter received an asynchronous message. Attempting to send tRFC for ZBAPI_ALM_CONF_CREATE with TID XIVqvZy8z94TkgWVR9u01m0m
2006-12-19 11:12:58 Success The message was successfully delivered to the application using connection AFW.
2006-12-19 11:12:58 Success The message status set to DLVD.

but the table is not updating...
please guide me..
regards
ram

File to rfc...database tables not updating

Hi friends..
in file to bapi ..
created ZRFC and in that rfc i given standard bapi and commit work..
i tested in sap ..the table is updating..
thru XI..the table is not updating...
it showing likw this..in receiver rfc adpater monitering...
Receiver channel 'CC_IN_SAP_WorkOrderCompletion' for party '', service 'SAP_ERP_DEV' (internal name 'RfcClient[CC_IN_SAP_WorkOrderCompletion]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.249.196.86}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.249.196.86}
Current pool size: 1, maximum pool size : 1
Channel History
- OK: 2006-12-19 11:12:58 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
and in messagemonitering audit log..
2006-12-19 11:12:58 Success Message successfully received by messaging system. Profile: XI URL: http://dcexi0602.aaaa.com:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSERDGX
2006-12-19 11:12:58 Success Using connection AFW. Trying to put the message into the receive queue.
2006-12-19 11:12:58 Success Message successfully put into the queue.
2006-12-19 11:12:58 Success The message was successfully retrieved from the receive queue.
2006-12-19 11:12:58 Success The message status set to DLNG.
2006-12-19 11:12:58 Success Delivering to channel: CC_IN_SAP_WorkOrderCompletion
2006-12-19 11:12:58 Success RFC adapter received an asynchronous message. Attempting to send tRFC for ZBAPI_ALM_CONF_CREATE with TID XIVqvZy8z94TkgWVR9u01m0m
2006-12-19 11:12:58 Success The message was successfully delivered to the application using connection AFW.
2006-12-19 11:12:58 Success The message status set to DLVD.
please help me..
regards
ram

Hi Sravya..
yes i given commit work after bapi in ZRFC..
in SAP..i tested ..its updating...but thru XI..
it is showing success..
but its not updating tables...
thanks for your response
regards
ram

Error in table parameter (file to rfc)

hi,
i debugged file to rfc(bapi wrapper) sceneario and i did not find data in table parameter.
data is perfect in import parameter.
plz help me.
vijender

hi,
i am configuring file to rfc scenario. i created a rfc wrapper. a wrapper is a comination of a bapi and commit work or
bapi_transcation_commit.
i on receiving side in r/3 system i dont find data in table parameter but iam getting data in import paramters
where is data missing .
plz help me.
t & g
vijender

Table Parameter Values Are Input To RFC?

Hi,
My Requirement is Table Parameter Values are Input RFC.
We have Table Parameter With Project ID Column and Multiple Rows.
User Need To Enter Project id's in Table And Submit.The Result can be displayed.
In My Scenario User Need to enter the values in table.
I Developed Webdynpro Application and Deployed.
When i am trying to enter values into a table,table is not taking values.
Because in My Requirment is the user enter morethan one project id in table.
Thanks
SubbaRao Chinta

Hi,
Can you please explain more clearly that what is the meaning of "Table not taking values"?
Did you take the ColumnCellEditor(inputfield) for table column as input field.
For example, You need to create a value node as below
ProjectIdsNode (Value node with cardinality 0..n & selection 0...n)
---> ProjectId (Attribute)
And bind this ProjectIds node to table UI element. And bind ProjectId attribute to ColumnCellEditors(inputfield) value property.
Now in submit action loop though this node and get all the values entered in ProjectId attribute.
And set all these values into input of your RFC while executing to store in backend.
Regards,
Charan

IKM File to Hive (Load Data) error

I use Odi version 11.1.1.6 .
I need to trasfer a csv file from Hdfs to a Hive table.
My csv file is located into HDFS path: /user/oracle/inboxlog
My physical architecture is so set:
- File :
     Dataserver:
          Name : HDFSFILE
          jdbc Driver: empty
          jdbc Url: hdfs://mynode:8020
     Physical Schema:
          Directory Schema: /user/oracle/inboxlog
          Directory WorkSchema: /user/oracle/inboxlog
          Context: HADOOP
          Logical Schema: LogicalHdfs
- Hive:
     Dataserver:
          Name : NEW_HIVE
          jdbc Driver: org.apache.hadoop.hive.jdbc.HiveDriver
          jdbc Url: jdbc:hive://mynode:10000/default
          hive metastore uri: thrift://mynode:10000
     Physical Schema:
          Directory Schema: default
          Directory WorkSchema: default
          Context: HADOOP
          Logical Schema: NEW_HIVE_LOGICAL
My logical architecture is so set:
-File:
     Name: LogicalHdfs
     Context: HADOOP
     Physical Schema: HDFSFILE./user/oracle/inboxlog
-Hive:
     Name: NEW_HIVE_LOGICAL
     Context: HADOOP
     Physical Schema: NEW_HIVE.default
I created an interface in which I use as the source csv file and how to target a hive table.
The source file is defined in a datastore so that:
name: myfile.csv
resource name : myfile.csv
datastore type: table
file format : delimited
record separator: unix
field separator: ,
text delimited: "
and it has 5 columns string type.
the target hive table is definited in a datastore:
name: mytable
resource name : mytable
datastore type: table
and it has the same column of the myfile.csv
I use for the interface the IKM file to hive (load Data) with this parameter:
create target table: true;
truncate :true;
file is local: false;
use staging table: false
the remaining parameters are set to default.
when I start the interface it snaps to the third step with the following error:
org.apache.bsf.BSFException: exception from Groovy: java.sql.SQLException: Exception encountered while submitting:
load data inpath 'hdfs://mynode:8020/user/oracle/inboxlog/myfile.csv' overwrite
into table mytable
Query returned non-zero code: 10028, cause: FAILED: SemanticException [Error 10028]: Line 1:18 Path is not legal ''hdfs://mynode:8020/user/oracle/inboxlog/myfile.csv'': Move from: hdfs://mynode:8020/user/oracle/inboxlog/myfile.csv to: hdfs://bdavm-ns/user/hive/warehouse/myfile is not valid. Please check that values for params "default.fs.name" and "hive.metastore.warehouse.dir" do not conflict.
at org.codehaus.groovy.bsf.GroovyEngine.exec(GroovyEngine.java:110)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.SQLException: Exception encountered while submitting:
load data inpath 'hdfs://mynode:8020/user/oracle/inboxlog/myfile.csv' overwrite
into table mytable
Query returned non-zero code: 10028, cause: FAILED: SemanticException [Error 10028]: Line 1:18 Path is not legal ''hdfs://mynode:8020/user/oracle/inboxlog/myfile.csv'': Move from: hdfs://mynode:8020/user/oracle/inboxlog/myfile.csv to: hdfs://bdavm-ns/user/hive/warehouse/mytable is not valid. Please check that values for params "default.fs.name" and "hive.metastore.warehouse.dir" do not conflict.
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at org.codehaus.groovy.reflection.CachedConstructor.invoke(CachedConstructor.java:77)
at org.codehaus.groovy.runtime.callsite.ConstructorSite$ConstructorSiteNoUnwrapNoCoerce.callConstructor(ConstructorSite.java:107)
at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCallConstructor(CallSiteArray.java:52)
at org.codehaus.groovy.runtime.callsite.AbstractCallSite.callConstructor(AbstractCallSite.java:192)
at org.codehaus.groovy.runtime.callsite.AbstractCallSite.callConstructor(AbstractCallSite.java:200)
at flexUtilHive.executeQuery(Prepare_Hive_session:53)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite$PogoCachedMethodSiteNoUnwrap.invoke(PogoMetaMethodSite.java:246)
at org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite.call(PogoMetaMethodSite.java:63)
at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:40)
at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:117)
at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:125)
at Load_data_file_s_.run(Load_data_file_s_:113)
at groovy.lang.GroovyShell.evaluate(GroovyShell.java:576)
at groovy.lang.GroovyShell.evaluate(GroovyShell.java:614)
at groovy.lang.GroovyShell.evaluate(GroovyShell.java:595)
at org.codehaus.groovy.bsf.GroovyEngine.exec(GroovyEngine.java:108)
... 19 more
any idea?

Hi all,
for those who are interested, I solved the problem below , it was file permissions of the loaded file.
Hive moves the input file from its original path to its warehouse directory.
In order to move the file, the agent needs write permissions on HDFS input directory. When I gave the permission, it was solved.
Regards...

ERROR IN FILE--XI--RFC SCENARIO. BAPI did not UPDATE the DATABASE TABLE

Hi
I have created a scenario FILE -XI- RFC
File is picked by file adapter - Its working fine
I have used BPM
In RFC side i used BAPI_INCOMINGINVOICE_CREATE
Its working fine and return an Invoice Number and Fisical year .
When i Check this in the R/3 System , in Invoice no Does not Exist .
Message mapping is ok
SXMB_MONI all are ok
Receiver file i got the invoice no and fisical year .
The Problem is " DATABASE TABLE DID NOT UPDATED "
So should i do BAPI_COMMIT seperately ........
Any solution ................
VERY VERY URGENT .....
thanks in advance
B.Jude

hi jude,
Commit Control for Single BAPI Calls
If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values , S, I, and W are displayed. All other values are regarded as errors.
To change this setting, set the indicator BAPI Advanced Mode.
In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.
Regards,
Mandeep Virk

Missing IN or OUT parameter at index on Data Modeler

Hi,
I'm using Data Modeler 2.0.0 build 570 (with Java 1.5.0 (build 1.5.0_15-b04)).
Usually I import tables from Data Dictionary (Oracle Database 10g Enterprise Edition Release 10.2.0.3.0) into a relational model, I modify them and then I export relational model informations into a Reporting Schema (different oracle schema inside same db).
I cannot understand why sometimes, during these exports, I get the error "Missing IN or OUT parameter at index"
Here an extract of the Data Modeler log file:
2009-09-15 16:00:36,601 [Thread-6] ERROR ReportsHandler - Error Exporting to Reporting Schema:
java.sql.SQLException: Missing IN or OUT parameter at index:: 10
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
     at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1737)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3376)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1061)
     at oracle.dbtools.crest.exports.reports.RSCheckConstraint.export(Unknown Source)
     at oracle.dbtools.crest.exports.reports.RSColumns.export(Unknown Source)
     at oracle.dbtools.crest.exports.reports.RSRelationalModel.export(Unknown Source)
     at oracle.dbtools.crest.exports.reports.ReportsHandler.export(Unknown Source)
     at oracle.dbtools.crest.swingui.ControllerApplication$ExportToReportsSchema$1.run(Unknown Source)
Does anyone know how to solve this problem?

Hi,
the problem is solved in latest published version (build 584). What is your version?
If you still have issue with build 584 please provide information from log file.
The constraint is generic if its syntax is not bound to specific database (vendor or version). So if you use syntax introduced in Oracle 10g then you have to define constraint as "Oracle 10g" related and it'll be generated for Oracle 10g and next versions of database.
Philip

Table parameter does not contain values in RFC call

Hello Experts,
I created RFC in R/3 with table parameter I_CUSTOMER. This RFC will be called by the CRM to pass all the customers data to R/3. The RFC was triggered by CRM passing 20 entries in I_CUSTOMER. However, when the debugger jumps in R/3 the table I_CUSTOMER in R/3 is empty. Can anyone help me to resolve the issue? any idea? thanks in advance!
Best Regards,
Alezandro

Hi Alezandro ..
what is the type of table parameter I_CUSTOMER u have declared??
if CRM is passing 20 values through I_CUSTOMER, u must take
type TABLE TYPE which is to be created in dictionary.
if it doesn't helps u ...can u be more clear??
Ram

File-to-rfc ..database tables are not updating??

hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded --------->Zrfc 0..unbouned
...id --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id ---------->Ztimeticktes-item-operation
.....closingdate ----------->Ztimeticktes-item-exec_fin_date
.....status ----------->Ztimetickets-item-fin_conf
.....comment ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
Ram

Hi..
my mappis is like this..
message message
.message1 message1
..workorders 1..1
..order 1..unbounded -
>Zrfc 0..unbouned
...id -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id -
>Ztimeticktes-item-operation
.....closingdate -
>Ztimeticktes-item-exec_fin_date
.....status -
>Ztimetickets-item-fin_conf
.....comment -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram

File to RFC - Missing data in table parameter

Similar Messages

Maybe you are looking for