File transport problem in XI 3.0

Hi,
I am facing an issue in transporting XI objects(JAVA component). When I am using the transport wizard for Export design or configuration objects it's showing me the below error "Error during Export The System can't find the path specified".
Export directory for .tpz file transport is defined as E:\usr\sap\XID\SYS\global\xi\repository_server\export for repository objects and E:\usr\sap\XID\SYS\global\xi\directory_server\export for config objects.
My observation regarding the issue:
Traverse through the following path
XI homepage --> Administration --> General Information.
In File Access tab, Information for Temporary Directory is shown as :(The system cannot find the path specified).
Is there any specific parameter or something in visual administrator through which I could actually set the temporary directory ?
Thanks,
Soumen

Hi Soumen,
The directory path you mentioned is the default one. The error you are facing is since the directory might not exist.
Please look into application server, if unix - login to the server and go to the path and check if it exists using cd command.
If windows, navigate to the folder location.
Next check if the access parameters/permissions are correct. I.E. the folder is not read only. For unix use chmod 777 <folder name> and for windows right click and set the permissions.
Regards,
Souvik

Similar Messages

Ear file transport problem

Hi Gurus,
A new Java web-dynpro application developed in development system, and after transported into productive portal. Everything ok. After that I modify the java program and transported the modified ear file into the QAS portal. The application run without error in development system, but in the QAS don't run. There is nothing relevant information in the default trace log.
What is the problem? This is a little application, contains only one ear file...
Thanks for your helps,

Hi David,
Please follow the link:
http://help.sap.com/saphelp_nw04/helpdata/en/f4/6c9962da317549a05919ce926b5196/frameset.htm
cheers,
Noel

File transport on business service

We have a messaging flow in OSB 10gR3 that read a message from a JMS queue and puts the file in an directory on an IBM AIX platform.
There have been some problems with the OSB not able to rename the files from example.xml.a to example.xml due to the fact that the destination application already is reading the example.xml.a file.
I think that the xml.a is a temporary file used by the OSB to produce the target file in the directory on the file system and then renaming it to example.xml
Now I have two questions on this subject:
Is there any way to influence this behaviour of the file transport in OSB?
Is there any documentation available on the file transport protocol that goes deeper on the subject than the Oracle documentation on this protocol.
Thanks
Henk Westra

The problem is that the consumer application is picking up all files that appear in the directory. It doesn't matter what you put in.
We suggested that they use a file mask on the types of files that need to be picked up, but that seems to be a problem.
So all I want to know is, what is the behaviour of the file transport protocol as a business server and if there is any way to influence this.
And if my assumption is correct that the .a suffix is usd by the OSB while processing files.
Any extra documentation about the file transport protocol is welcome.
Thanks
Henk

How to configure proxy services to use the file transport?

Hi,
I have configured a proxy service to poll for files in the specified folder. And it is configured to use the file transport.
At runtime, I'm getting the follwing exception -
<Apr 27, 2012 4:08:28 PM GMT+05:30> <Error> <WliSbTransports> <BEA-381602> <Error encountered while polling the resource for the service endpoint ProxyService$ServiceTypes_SB$BinaryService: javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.file' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/file'
javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transport.task.queue.file' didn't find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/file'
     at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
     at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
     at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     Truncated. see log file for complete stacktrace
Request help to resolve this.
Thanks in advance.
Regards
Shyam.V

Only the business service would rely on the JMS queues, which in turn would trigger an MDB. I have tested the business service and it works fine.
The problem is only with the polling part of the proxy service.
Regards
Shyam.V

Picking up half written files when using the ftp/file transports

Hello,
We are using the custom doc over generic protocol. We have an internal delivery channel which uses the file transport to read outbound documents. We stage those documents in the directory specified in the delivery channel. The problem we are having is that B2B reads the document before it can be fully written to the directory. How do I configure my transport to read the file after it has been fully written to the staging directory?
Cliff Wright

Hello Cliff,
This use can can be addressed by copying the files to a Work in Progress(WIP) folder and have an utility to copy it to the staging folder after it gets copied completely into the work in progress folder. One possible way to make sure it gets copied completely to the WIP is to check the size of the files in a regular interval for e.g 2 sec for 3 such interval and make sure the size of the file is not changing. HTH.
Please let us know.
Rgds,Ramesh

Error while Transport objects from DEv to QA-File transport

Hai Experts!
While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
Regard's
Preethi.

Hai!
Issue is solved.
I try to export the Individual object -->Message mapping.
While exporting i unchecked the Option With software component version Defenition.
Now it is success. Thanks all replies.
Regard's
Preethi.

Open Hub transporting problems

Hi everybody, we have Open Hub transporting problems, it just gives us return code 12 or 8, basically, it doen't want to transport neither Open Hub Destination, nor Transformations, nor DTPs, and bear in mind that we're on the 15th Patch Level. We've looked at all the SAP Notes, but they reffer to the earlier patch levels...
And other problem, is that it's OK in DEV system but in QUALITY system, when you launch a DTP it gives us a dumb with ASSIGN_TYPE_ERROR
Any ideas??

My destination path on the DEV box is simply the following (identified by BID in the following path):
D:\usr\sap\BID\DVEBMGS00\work
And when I locate the un-activated open hub on the QA box, the BID is already changed to BIQ, but the server name box/field is empty....
I am going to try with the object changebility option, btw, is there any documentation on how to change these objects that are marked with object changebility on the QA box (provided that we can not manually change anything on the QA box)...
Anyways, I think my problem is with the server name conversion from "abc-bi-dev" to "abc-bi-qa"....!!!
Also, please note the RSBFILE entry for this object in the QA box has the "btcsrvname" as blank...
Do you think there is any additional setting that needs to be done on the QA box to do this translation (from "abc-bi-dev" to "abc-bi-qa")?
The only two setup we have done as far as the BI is concerned is at the "Tools-> Conversion of logical system name"....where you only put the conversion for client name mapping from dev to qa and local file system mapping from dev to qa.
So, is there anything else to map the host name (from "abc-bi-dev" to "abc-bi-qa") either at BI perspective or Basis/NetWeaver perspective?
Thanks a lot...
~Sabuj.
Edited by: Sabuj Haque on Feb 1, 2009 1:11 PM
Edited by: Sabuj Haque on Feb 1, 2009 5:34 PM

Rename output file for File Transport

I am using ALSB 2.6.When I created file transport for detect file in C:/filein directory.I found that the name of output file didn't same as input file,example input-file = IgniteRB output-file = 6815685856805434446-1b555112.11a526f862f.-7fb0
Please help me identify this problem? Thank you :)
Edited by poommy105 at 06/04/2008 7:38 PM

If you only need to change the name, then in your publish sub-actions, use the "Set Transport Headers" action. You should be able to check "Pass all Headers through Pipeline" and skip selecting the specific header.
Or in the list for headers there is one for fileName.
You can derive it from the source name using the $inbound variable, or select "copy from inbound".
If you need to change the path (instead of business service value) then you can use URI setting in "Routing Options" action.

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

How to use a file transport proxy service as trigger for a webservice

Hi,
I've implemented a alsb file transport proxy service. This proxy is watching a common directory and detects new files. After detection, the proxy move them in an archive folder.
After that I want call an external webservice with the filename as input parameter.
How can I comfigure that with the alsb console.
best regards
Oliver
with the to extract the filename after it was renamed by the proxy service.

How do you invoke/ instantiate the file based proxy service. Does it just run on activation in sb console? Does it continue to detect files or does it stop after detecting one file?
Also what is the format of the URL that points to the file folder.
For Ex: I have a folder named "TestFiles" on the C:\drive of the server.
Edited by premkumr at 10/31/2007 3:26 PM

SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM

i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
Using XP home, all updates installed... latest itunes,

It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
http://discussions.apple.com/thread.jspa?messageID=11161893&#11161893
Regards.

File sharing problems and horror story (nearly)

I use Leopard on a MacBook Pro, a MacBook and a iMac G4 800 MHz (unsupported model).
I have on the iMac and the MacBook Pro many users (the same ont he two machines) and I always use Fast User Switching.
I have had very few problems with Leopard until now; I like it even if there are some glitches or some new features which are not my cup of tea (hierarchical menus missing from the dock, stacks useless when there are many items, FireWall impossibilities (?) to open specific ports, Back to my Mac working on a Lan but not from outside until now, problems with a few apps (Parallels networking erratic), ...
Now about File Sharing.
Let say my main account is user1 (Administrator), and I have another user2 also administrator, plus user3, user4 standard users.
On the iMac I activate File Sharing.
On the MacBookPro, as user1, if I connect to the iMac Server (using afp://IPaddress_of_theiMac/) I do NOT get the dialog
"Enter your user name and password to access file server YYY
Connect to server as Guest or as Registered User"
but I directly get the dialog
"Select the volumes you want to mount on YYY"
From this, if I select user1 it mounts with full read/write permissions which is normal. It appears that I am connected with my Apple account user1&mac.com (same as mentionned in the Account panel of System Preferences).
On the other hand, if I try to connect to the user2 account, I only get limited access although in the File Sharing Preferences, user1/iMac is mentionned with full Read/Write preferences for the Home Folder of user2.
What is very surprising is that if I log on the MacBook Pro as user2, or user 3 or user4, then connect to the iMac, I first get the dialog to enter a user name and a password. This gives me access with the correct full permissions on user1/iMac or user2/iMac using the corresponding user name/password pair; this is the usual behaviour which is missing when trying to connect from user1/MacBook Pro.
Now for the Horror Story!
Trying to understand what was going on with the permissions of the user2/iMac account, I logged in to the iMac as user1, went to the Users folder and from there had a look on the informations about user2 home folder. In the lower part of the pannel, Sharing & Permissions says "You have no access" (which is normal) and this is followed by a table where users and permissions are listed. It seems user1 has Read and Write access in contradiction with the preceding phrase...
Anyway, I tried to modify these authorizations for user2 by clicking on the lock of the Information pannel and entering name and password of the administrator. Didn't go farther than that. By mistake, I hit Command-Delete and user2 was GONE from the list AND NOT ONLY from the list in the Information window! Using Fast User Switching and going to user2, nothing left on the Desktop and NO Home anymore.
In the System Preferences/Accounts panel, user2 was still mentionned.
In the Users folder, no user2 folder anymore.
Using once again Fast User Switching, I logged as user2 and got by magic an all new Home. Nothing left in Documents, Library or other user1 folders. Standard settings for icons, dock, etc.
My first move has been to use a very recent backup to restore everything (Thank you Mike Bombich from Copy Cloner!).
Once everything was back to normal, I had a look at the Trash from user1 and guess what, the Home folder of user2 was there, complete.
So now I am left with two questions
why is it I do not have the same dialogs when connecting from all the accounts although as far as I can see, configurations are the same?
why is it possible, from an Information pannel to delete the account of another user?
Thank you all for comments!

For the file sharing problems, answer is found in
http://docs.info.apple.com/article.html?artnum=306723

File Adapter or File Transport which one will give more performance

Hi all,
File Adapter or File Transport which one will give more performance ? in OSB?
Which one to select any one did performance analysis?
Thanks
Phani

Why don't you just go read some benchmarks?
http://www.barefeats.com/mbpp18.html

File path problem

I have looked an read through almost all the file path problem post possible and I am still having issues maybe one of you guys can help me, here are my files
I am doing this as an example so that I can apply it to all of my file problems....
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
pathexample.zip ‏122 KB

First of all, to troubleshoot the problem it would help to put some filepath indicators at each point so that you can see what is going on. Also, in your exe having an error dialog "Simple Error Handler.vi" to let you know what LabVIEW didn't like in the exe.
Now, when you run a top level ("Main.vi") and use the "Current VI's Path " in the development mode it returns <Filepath>\"Current path"\Main.vi. So stripping once will get you to <Filepath>\"Current path" . Now if you make it into an exe the "Current VI's Path" returns <Filepath>\"Current path"\"Name.exe"\Main.vi so you are "nested" one deeper.
I use the following construct to determine whether the vi is being used as in the development environment or as an exe, the parse the path accordingly, although in this instance it is used to supply different directory names to a little more complex file system.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

File transport problem in XI 3.0

Similar Messages

Maybe you are looking for