File upload fails...when specific encoding is included in the constructor

Hi All
I have a file upload function which uses MultipartRequest. It was working fine until I downloaded the latest version of MultipartRequest, which supports multi-lingual file upload. But now it does not work. I dont get any error message either.
If I put "ISO8859_1" as the encoding, the file is never uploaded and I dont get any error; just get the 'submission successful' message. If I use "SHIFT_JIS" as the encoding (as I need to support Japanese) the file never gets uploaded and I dont get the 'submission successful' message either. The browser slows down very much and never goes to next page.
What could be the reason?
Has anybody used MultipartRequest to support languages other than English?
Thanks in advance.
m_asu

Still stuck with upload functionality:
Problem is with the name of the file. If I try to upload the file with Japanese name, it does not go the desired location and I dont get an error either. So it is hard to figure out what is going on.
m_asu

Similar Messages

File upload fails

File upload fails when the file is larger than about 50kb. The upload returns a blank page when it fails. I have searched the world over and cannot find an answer to this problem. Does anyone have any suggestion of what to do?
Thank you,
Chris

What mechanism are you using to handle uploaded files? Some libraries place a configurable limit on the size of the file.

Getting "Warning: The file upload failed.No such file or directory." while trying to upload image using af:inputFile

Hi,
I have a <af:inputFile> component which will upload only image file and render the corresponding image...
It work with normal application deployed on weblogic server however when i use same taskflow as a part of human task in SOA BPM worklist...
I get this warning message "Warning: The file upload failed.No such file or directory." for certain files where as it works for certain image files.
And in BPM whenever i upload PNG file it throws this error.
Please help.

For some files like Images with .png extensions it gives following error :
java.io.IOException: No such file or directory
at java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(File.java:1705)
at java.io.File.createTempFile0(File.java:1726)
at java.io.File.createTempFile(File.java:1803)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl._createOutputStream(UploadedFileImpl.java:284)
at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl.loadFile(UploadedFileImpl.java:208)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl._processFile(CompositeUploadedFileProcessorImpl.java:344)
at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl.processFile(CompositeUploadedFileProcessorImpl.java:95)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl._doUploadFile(FileUploadConfiguratorImpl.java:329)
at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl.beginRequest(FileUploadConfiguratorImpl.java:162)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl._startConfiguratorServiceRequest(GlobalConfiguratorImpl.java:610)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:216)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:155)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Unable to submit form without attachment if file upload fails

Hi All,
I have a form, in which I have a input file component.
Scenario 1 - If i don't attach anything and submit the form, it is successful.
Scenario 2 - If I attach a file of size less than 2 MB and then submit, it is successful.
Scenario 3 - If I attach a file of size greater than 2 MB and then submit, ADF gives an error message saying " File is large" which is expected.
3.1 - In the scenario 3, after file upload fails, I want to submit the form without attaching any file. But the form isn't submitted and the warning message always pops up.
3.2 - If I upload file of size less than 2MB again and then submit, it is successful.
Please help me in resolving the issue.
Thanks,
Harini.

Try clearing the error messages
<af:resource type="javascript">
function clearMessagesForComponent(evt){
AdfPage.PAGE.clearAllMessages();
evt.cancel();
</af:resource>Now all yo uneed to do is to call this javascript method e.g. using a <af:clientListener method="clearMessagesForComponent" type="focus"/>on a button or any other field.
Timo

Can't Upload Large Files (Upload Fails using Internet Explorer but works with Google Chrome)

I've been experience an issue uploading large (75MB & greater) PDF files to a SharePoint 2010 document library. Using normal upload procedures using Internet Explorer 7 (our company standard for the time being) the upload fails. No error message is thrown,
the upload screen goes away and the page refreshes and the document isn't there. I tried upload multiple and it says throws a failed error after a while.
Using google chrome I made an attempt just to see what it did and the file using the "Add a document" uploaded in seconds. Can't figure out why one browser worked and the other doesn't. We are getting sporadic inquiries with the same issue.
We have previously setup large file support in the appropriate areas and large files are uploaded to the sites successfully. Any thoughts?

File size upload has to be configured on the server farm level. Your administrator most likely set
up the limit to size of files that can be uploaded. This size can be increased and you would then be able to upload your documents.

How to popup file upload tag when we click on a button?

Hi All,
In BSP, How to popup the file upload tag when we click on a button?
Let us Assume that when we click on open button as mentioned in the below 1st screen shot one popup should open like the below mentioned screen shot2 in the same page?
Screen Shot1
Screen shot 2
Please help me on this.
Thanks

if you're using a document class ascircle, that should something like:
package{
import flash.display.MovieClip;
import flash.events.MouseEvent;
public class ascircle extends MovieClip{
public function ascircle(){
init();
private function init():void{
stage.addEventListener(MouseEvent.CLICK,clickF);
function clickF(e:MouseEvent):void{
Circle.play();
// if you're adding code to the main timeline, you would use:
stage.addEventListener(MouseEvent.CLICK,clickF);
function clickF(e:MouseEvent):void{
Circle.play();

I couldn't migrate outlook .pst files to thunderbird.when i tried to import from the tools tab all the options are grayed out.

I couldn't migrate outlook .pst files to thunderbird.when i tried to import from the tools tab all the options are grayed out.

http://kb.mozillazine.org/Import_.pst_files

Verisign announced a new CA certificate in October 2010, Verisign Class 3 Secure Server G3. When will this be included in the CA list of the browser? It is in other browsers already (IE, Safari, etc)

Verisign announced a new CA certificate in October 2010, Verisign Class 3 Secure Server G3. When will this be included in the CA list of the browser? It is in other browsers already (IE, Safari, etc), yet in Firefox you're currently prompted with a security warning for a trusted CA.

That is one of the intermediate certificates that VeriSign is using. Intermediate certificates are part of the chain that is formed by the web server certificates and build-in root certificates. Such an intermediate certificate needs to be send by the server and is not included by default in Firefox. Firefox will store such an intermediate certificate for future use when a website sends it.
See https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1130

Risk File uploads fails - For input string: ""

Hello,
I noticed that everytime I tried analyzing something it came back with No Conflict for anything.
On further investigation I realized that none of my custom risks shows up in Rule Architect tab.
I have been trying to upload the Risk Files again and it does not get uploaded and at the bottom I see the following message :
For input string: ""
please advise how I should overcome this issue.
Thanks,
Farah

Farah,
We are having this issue and would like to know how you addressed it.
Specifically, we went through our source rules in Access to customize them, and then saved them as text files.
They all mostly loaded. Then during the load of the R3 function actions, the computer crashed.
When it came back up, we weren't sure if the function actions had completed, so we tried to reload it, and got that whole oracle duplicate error that's been discussed in this thread.
We investigated further and noted that the function load had worked partially, until the time the laptop crashed. So now when we try to load the rest of the functions, it gives the "For input string: """ error.
Any ideas?
Thanks,
Santosh

I get a file upload popup when composing an email using Godaddy webmail. How can I prevent this from happening?

When I try to compose an email from Godaddy's webmail in the Firefox browser. My steps are as follows:
-Open Firefox.
-Log in to Godaddy webmail.
-I hit the compose button.
-New window pops up. This is the window that I would compose an email in.
- Right after the compose window loads, I get another window that pops up. This window says "File Upload" in the upper left corner.
If I exit that window I can then compose my email, and life is good until I want to compose another email. Then the problem repeats. I have contacted Godaddy support and the problem is not on their end. Also the problem DOES NOT happen when using another browser (Internet Explorer).

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

PAR File upload Failed in NWDS

Hi ,
i.While i m trying to deploy PAR file from NWDS it showing Error like this"<b>PAR Fileupload Faild Please Check the user Name And Password</b> " .Also I tried this with admin Userid and Password,it showing the same error.
ii.I can able to Login in to the Portal,But i cant deploy the PAR File.
Help me to get through this .
Regards,
Malini.V

Hello Malini,
There is no configuration on server side for uploading PAR files. Please check your EP Server settings they can be the only cause of error. In NWDS please go to Windows->prefrences->SAP Enterprise Portal. Provide all the necessary details over there.
You should use a user id which is having super_admin role assigned to it.
In case you still get error that upload failed, In NWDS please go to Windows->prefrences->Workbench->Proxy Settings. remove proxy if it is there.
Also the upload can fail depending of the content of the file, please ensure that there is no error in the code you are using.
Regards
Atul Shrivastava
PS:Award points for helpful answer.

File upload fails if name of the file is in Japanese

Hi all,
I posted this message before, but could not get any response. So posting again.
In my JSP app, I am using the latest MultipartRequest class to develop the file upload functinality through a form. Till now I was using MultipartRequest old release which was working fine for files names in English. But the new one supports international languages and therefore I am trying to use that to upload files named in Japanese. But it fails.
Worse part is I dont get any error. But the file never reaches the desired location. I am trying to print the filenames in different Java methods just to see the progress, and I can see all the filenames/paths printed right. But the file never gets uploaded.
Any hints?
m_asu

Afternoon!
I had successfully done the same work . Besides Japanese filename, Korean and Chinese filenames are running ok.
you should check following points:
1. jsp's content-type:
<META http-equiv=Content-Type content="text/html;charset=shift_jis">
2. form's type:
<form method="POST" name="aaaa" enctype="multipart/form-data" action = "MyServlet">
if both points are right, perhaps you should download a new release of uploading file from http://www.servlets.com

File Adapter: Fixed length file read fails when all data not present

Hi
We have a BPEL process that reads fixed length data files. It works fine when all the data elements are available in the file but fails with 'rejected:10002' when even a single data is missing.
How to handle this situation in BPEL file adapter?
Are we doing something wrong or is this a normal functionality.
If yes, then is there any work around for this as this is a very usual business condition which may occur, where all data elements are not mandetory.
fixedLength
==========
2,3,3,2
Data - Successful
============
1234567890
2345678901
3456789012
Data - Failed
===========
1234567890
2345678901
345678901
Thanks in advance
Buddhadev

Hi Naveen,
      Do check the following things,
>>Note : I have been asked to give the Transport Protocol as "NFS" (Whether this is the problem???) I have summarized the complete details below. Please help me
       1.If your file resides on your local network/local computer give NFS(Network file system). if your file resides on a FTP location give FTP and also give the FTP log on parameters.
Additional Parameters
File_MT.fieldFixedLengths 10,10,5
File_MT.fieldNames VendorNumber,VendorName,City
File_MT.fieldSeparator
File_MT..processFieldNames fromConfiguration
       2.If this structure does not match with the input file structure the file adapter wont pick up the file. So check for the help document provided by SAP in the following path.
help.sap.com --> Documentation --> SAPNetWeaver --> SAPNetWeaver '04 --> English --> process integration --> SAP Exchange Infrastructure --> connectivity --> Adapters --> File Adapter
       Your file contains three records
V123456789 A123456789 Bosto
V234567890 B123456789 Atlan
V334587900 C123456789 Austi
You have mentioned the fieldSeperator as space but there is no File_MT.endSeparator '/n' which differentiates between each and every row (record).
        Parameters for Record set Structures mentioned in the sender adapter configuration does not match with the actual file structure .
        Try giving exact structures in the configuration of sender file adapter.
regards,
Aravindh.

File upload Fails in FireFox on SunRays

We can't get File upload to work with a Browser Running under SunRays on FireFox
We have finally identified the http problem (http 417) which is causing the IO flash error.
We tried this on FireFox 3.0 as well as FireFox 3.5.3 both with the same results. Also, I doubt if this is a browser issue because uploading files to the same servlet from a test JSP page works fine. Whatever happens, happens between flash player and the browser.
After using a simple MXML file (attached below) to test the file upload functionality on different operating systems we have discovered that it brakes with an unusual error when tested on Solaris.
We put sniffers and clearly noticed the difference in the headers generated by Flash 10 in different OS environments.
As you can see from the examples below, the later version (the one running on Solaris) has an extra "Expect:" in the header which we believe is responsible for the HTTP 417 error (which, in its turn, is responsible for 2038 thrown by flex)
Here is a header generated from a functional system: POST /iehs_core_document/FileUploadServlet HTTP/1.1
Host: dev01.intelligentehs.com:9086
Accept: */*
User-Agent: Shockwave Flash
Connection: Keep-Alive
Cache-Control: no-cache
Content-Length: 755
Expect: 100-continue
Content-Type: multipart/form-data; boundary=----------------------------e6d2f5d2c945
And here is a header generated from OpenSolaris 11 2009.06
POST /iehs_core_document/FileUploadServlet HTTP/1.1
Host: dev01.intelligentehs.com:9086
Accept: */*
User-Agent: Shockwave Flash
Connection: Keep-Alive
Cache-Control: no-cache
Expect:
Content-Length: 653
Expect: 100-continue
Content-Type: multipart/form-data; boundary=----------------------------b64e06f786e4

Does anyone deploy to SunRay virtual clients?
We have a customer who has a ton of them around the world and need to run our Flex based application but File Upload does not work at all... so anyone with any information/ideas on a fix or work around this issue, we would love to hear from you.
Thanks if advance,
Anthony

File upload hanging when called from another form

Hi
I have created a file upload form from the documentation I found on metalink and the form works fine on its own. I have then implemented the form into a multi form application and when the file upload form is called from another form it hangs trying to get to the client drive so that it can pick up a file. I have tried using the 'call_form', 'open_form' and 'new_form' built-ins but the results were all the same. Can anybody help me?
Maria

Hello,
This is not the support, so there are no post more urgent than other.
Francois

File upload fails...when specific encoding is included in the constructor

Similar Messages

Maybe you are looking for