File using XML Unable to complile

Hi All
I am trying to compile XMLAdaptor.java file, it throws me following exception...
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/Document.java)
[70:1] class Document is public, should be declared in a file named
Document.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/Node.java)
[250:1] class Node is public, should be declared in a file named Node.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/DocumentType.java)
[77:1] class DocumentType is public, should be declared in a file named
DocumentType.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/DOMImplementation.java)
[21:1] class DOMImplementation is public, should be declared in a file
named DOMImplementation.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/Element.java)
[71:1] class Element is public, should be declared in a file named
Element.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/DOMException.java)
[30:1] class DOMException is public, should be declared in a file named
DOMException.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/DocumentFragment.java)
[52:1] class DocumentFragment is public, should be declared in a file
named DocumentFragment.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/Text.java) [33:1]
class Text is public, should be declared in a file named Text.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/CharacterData.java)
[60:1] class CharacterData is public, should be declared in a file named
CharacterData.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/Comment.java)
[19:1] class Comment is public, should be declared in a file named
Comment.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/CDATASection.java)
[31:1] class CDATASection is public, should be declared in a file named
CDATASection.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/ProcessingInstruction.java)
[50:1] class ProcessingInstruction is public, should be declared in a file
named ProcessingInstruction.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/Attr.java)
[118:1] class Attr is public, should be declared in a file named Attr.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/EntityReference.java)
[35:1] class EntityReference is public, should be declared in a file named
EntityReference.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/NodeList.java)
[40:1] class NodeList is public, should be declared in a file named
NodeList.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/w3c/dom/NamedNodeMap.java)
[43:1] class NamedNodeMap is public, should be declared in a file named
NamedNodeMap.java
(source unavailable)
D:/valenyap/cvs/common/lib/xml/parser-1.1.jar(org/xml/sax/InputSource.java)
[49:1] class InputSource is public, should be declared in a file named
InputSource.java
(source unavailable)
17 errors
Errors compiling XMLAdaptor.
In one pc works fine, when I tried to compile in another PC (Using Netbean)please help me....
regards
Balmiki

Hi All
As I belive is my JDK is of j2sdk1.4.1_01 & parser is parse 1.1.jar... where it compiles fine.
In another PC I am using JDK is j2sdk1.4.2_01. So I belive is parser1.1.jar file is the older version, so it is getting conflict.
So I need to use newer jar files for W3C DOM parser.jar...
Is my concern is ok?
reagrds
Balmiki

Similar Messages

  • Getting error while running the XML file using XML Publisher Desktop

    Hi all,
    We have successfully loaded the XML file using XML Publisher Desktop. But when we preview the same using PDF format we are getting the following error.
    Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
    Run XDO Start
    RTFProcessor setLocale: en-us
    FOProcessor setData: C:\Documents and Settings\smanmadh\Desktop\ProductCompensationDT.xml
    FOProcessor setLocale: en-us
    java.lang.NullPointerException
         at oracle.apps.xdo.template.fo.area.PageNumber.formatString(PageNumber.java:104)
         at oracle.apps.xdo.template.fo.IDManager.registerId(IDManager.java:44)
         at oracle.apps.xdo.template.fo.area.AreaTree.registerLastPageJoinSeq(AreaTree.java:1106)
         at oracle.apps.xdo.template.fo.area.AreaTree.incrementJoinSequenceIndex(AreaTree.java:219)
         at oracle.apps.xdo.template.fo.area.AreaTree.registerLastPageDocument(AreaTree.java:1089)
         at oracle.apps.xdo.template.fo.area.AreaTree.forceOutput(AreaTree.java:471)
         at oracle.apps.xdo.template.fo.elements.FORoot.end(FORoot.java:58)
         at oracle.apps.xdo.template.fo.FOHandler.endElement(FOHandler.java:386)
         at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
         at oracle.apps.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:279)
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:1022)
         at RTF2PDF.runRTFto(RTF2PDF.java:626)
         at RTF2PDF.runXDO(RTF2PDF.java:460)
         at RTF2PDF.main(RTF2PDF.java:251)
    Thanks in Advance.
    Sudeep.

    This is BI related. You will get a quicker answer from the BI Publisher forum
    BI Publisher

  • Error while running the XML file using XML Publisher Desktop

    Hi All,
    We have successfully loaded the XML file using XML Publisher Desktop.But when we try to preview it using the PDF format we are getting the following error.
    Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
    Run XDO Start
    RTFProcessor setLocale: en-us
    FOProcessor setData: C:\Documents and Settings\smanmadh\Desktop\ProductCompensationDT.xml
    FOProcessor setLocale: en-us
    java.lang.NullPointerException
         at oracle.apps.xdo.template.fo.area.PageNumber.formatString(PageNumber.java:104)
         at oracle.apps.xdo.template.fo.IDManager.registerId(IDManager.java:44)
         at oracle.apps.xdo.template.fo.area.AreaTree.registerLastPageJoinSeq(AreaTree.java:1106)
         at oracle.apps.xdo.template.fo.area.AreaTree.incrementJoinSequenceIndex(AreaTree.java:219)
         at oracle.apps.xdo.template.fo.area.AreaTree.registerLastPageDocument(AreaTree.java:1089)
         at oracle.apps.xdo.template.fo.area.AreaTree.forceOutput(AreaTree.java:471)
         at oracle.apps.xdo.template.fo.elements.FORoot.end(FORoot.java:58)
         at oracle.apps.xdo.template.fo.FOHandler.endElement(FOHandler.java:386)
         at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
         at oracle.apps.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:279)
         at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:1022)
         at RTF2PDF.runRTFto(RTF2PDF.java:626)
         at RTF2PDF.runXDO(RTF2PDF.java:460)
         at RTF2PDF.main(RTF2PDF.java:251)
    Any pointers will be of great help.
    Thanks in Advance
    Sudeep.


    I had a similar error which when I searched, came up with this thread.
    My issue was resolved after I discovered that my RTF template was not really RTF. It was sill in MS Word DOC format. This was discovered by reviewing two templates in NOTEPAD. The MS-DOC files have a lot of "special" characters in them. My RTF was not really RTF.
    After doing a SAVE AS - RTF format, then the preview worked as expected.
    Just Sharing...
    --Tim                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Creating indesign files using xml & c#

    hey...
    i need to make an indesign template/doc from an XML file using C# as the language. can anyone of you please help me in this.
    Thanks in advance to all of you.

    The InDesign file format is a proprietary binary format, which changes between releases. Your best shot is IDML, but that is only for CS4. There is also the INCX interchange format, but it has limitations.

  • How to call swf file within another swf file using xml

    hii,
    I am facing some problem to call a swf file via xml when this xml file loaded it calls another swf file which includes a new xml file. now if i call this nested swf calling without xml it works but in case case of xml it is not showing the result. i m confused. how to nested xml file calling done in as2/as3. i need some logics. thanks in advance

    This is the AS3 forum and your posting involves AS2 code.  You should repost in the AS2 forum...
    http://forums.adobe.com/community/flash/flash_actionscript
    Aside from that, your problem might lie in the following lines...
    _root.createEmptyMovieClip("sub_container1", 1);
    loadMovie(sub_SWFPath[1].attributes.url, "sub_container1");
    You create the new movieclip, sub_container1,  in the _root, but you do not assign the loadMovie to load into that same movieclip (unless you have a _lockroot = true assigned in your sub-swf).  In any case, you should repost in the AS2 forum to pursue resolution.

  • Generate XSLT file using XML

    Hi All,
    How to generate XSLT file based on the below xml
    <Employees>
    <Employee EmployeeID="1">
    <FirstName>Guy</FirstName>
    <LastName>Gilbert</LastName>
    <Address>
    <AddressLine1>7726 Driftwood Drive</AddressLine1>
    <City>Monroe</City>
    <StateOrProvince>WA </StateOrProvince>
    <PostalCode>98272</PostalCode>
    </Address>
    </Employee>
    <Employee EmployeeID="2">
    <FirstName>Kevin</FirstName>
    <LastName>Brown</LastName>
    <Address>
    <AddressLine1>7883 Missing Canyon Court</AddressLine1>
    <City>Everett</City>
    <StateOrProvince>WA </StateOrProvince>
    <PostalCode>98201</PostalCode>
    </Address>
    </Employee>
    </Employees>and also like to know how to query whole employees details using SQl Query?Thanks in advance-DS

    Hi Karthi,
    Regarding your description, to achieve your requirement you can reference the below code.
    --create schema collection
    CREATE XML SCHEMA COLLECTION EmployeeSchema AS '
    <schema xmlns="http://www.w3.org/2001/XMLSchema">
    <element name="Employees" >
    <complexType>
    <sequence>
    <element name="Employee" minOccurs="0" maxOccurs="unbounded">
    <complexType>
    <sequence>
    <element name="FirstName" minOccurs="1" maxOccurs="1" />
    <element name="LastName" minOccurs="1" maxOccurs="1" />
    <element name="Address" minOccurs="1" maxOccurs="1" >
    <complexType>
    <sequence>
    <element name="AddressLine1" type="string" />
    <element name="City" type="string" />
    <element name="StateOrProvince" type="string" />
    <element name="PostalCode" type="string" />
    </sequence>
    </complexType>
    </element>
    </sequence>
    <attribute name="EmployeeID" type="string" use="required" />
    </complexType>
    </element>
    </sequence>
    </complexType>
    </element>
    </schema>'
    --Validating an XML variable
    DECLARE @xmlDoc XML(EmployeeSchema);
    SET @xmlDoc =
    '<Employees>
    <Employee EmployeeID="1">
    <FirstName>Guy</FirstName>
    <LastName>Gilbert</LastName>
    <Address>
    <AddressLine1>7726 Driftwood Drive</AddressLine1>
    <City>Monroe</City>
    <StateOrProvince>WA </StateOrProvince>
    <PostalCode>98272</PostalCode>
    </Address>
    </Employee>
    <Employee EmployeeID="2">
    <FirstName>Kevin</FirstName>
    <LastName>Brown</LastName>
    <Address>
    <AddressLine1>7883 Missing Canyon Court</AddressLine1>
    <City>Everett</City>
    <StateOrProvince>WA </StateOrProvince>
    <PostalCode>98201</PostalCode>
    </Address>
    </Employee>
    </Employees>'
    --how to query whole employees details
    SELECT T.N.value('@EmployeeID[1]','INT') AS EmployeeID,
    T.N.value('(FirstName)[1]', 'nvarchar(max)') AS FirstName,
    T.N.value('(LastName)[1]', 'nvarchar(max)') AS LastName,
    T.N.value('(Address/AddressLine1)[1]', 'nvarchar(max)') AS AddressLine1,
    T.N.value('(Address/City)[1]', 'nvarchar(max)') AS city,
    T.N.value('(Address/PostalCode)[1]', 'nvarchar(max)') AS PostalCode
    FROM @xmlDoc.nodes('/Employees/Employee') AS T(N)
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

  • Send binary file using xml

    Hi all,
    I've got an application wich currently sends xml messages through sockets between server and client. Now, I'd like to be able of sending binary files (jpegs and other images...) as some content of these files. Is it possible with CDATA? Do you know any URL with an example or something?
    thanks a lot!

    This is a little example that shows the solution I adopted.
    Two classes, a server and a client, execute the server in a given port and the client with "localhost" as ip and the same port as the server.
    Ex: java Server 5555
    java Client localhost 5555
    the code:
    import java.net.*;
    import java.io.*;
    public class Server {
        public static void main(String[] args) {
            ServerSocket serverSocket = null;
            if(args.length!=1){
                System.out.println("ERROR: java Server <port>");
            } else {
                   // Create listening socket
                   try {
                        serverSocket = new ServerSocket((new Integer(args[0])).intValue());
                   } catch (IOException e) {
                        System.out.println("ERROR: not possible to listen on the specified port");
                        System.exit(1);
                   // Create wait for connection
                   Socket clientSocket = null;
                   try {
                        clientSocket = serverSocket.accept();
                   } catch (IOException e) {
                        System.err.println("ERROR: Accept failed.");
                        System.exit(1);
                   try{
                          // Get the output channel
                        PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
                        // Send a xml message
                        out.print("<?xml version=\"1.0\" encoding=\"UTF-8\"?><FOO><VAR message=\"ugly harcoded XMLmessage\"/></FOO>\0");
                        out.flush();
                        out.close();
                        clientSocket.close();
                        serverSocket.close();
                   } catch(IOException IOE){
                        System.out.println("ERROR: on send");
    import java.io.*;
    import org.w3c.dom.Document;
    import java.net.*;
    import javax.xml.parsers.SAXParserFactory;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import javax.xml.parsers.ParserConfigurationException;
    import org.xml.sax.SAXException;
    import org.xml.sax.InputSource;
    public class Client {
         public static void handleIncomingMessage(Document doc){
            System.out.println("DO WHAT YOU WANT WITH THE XML!");
        public static void main(String[] args){
            BufferedReader in = null;
            Socket socket = null;
            if(args.length!=2){
                System.out.println("ERROR: java Client <ip> <port>");
            } else {
                String ip = args[0];
                int port = (new Integer(args[1])).intValue();
                   // Open a socket to the server
                try {
                        socket = new Socket(ip,port);
                   } catch (UnknownHostException e) {
                        System.out.println("ERROR: Unknow host!");
                        System.exit(1);
                   } catch (IOException e) {
                        System.out.println("ERROR: I/O error");
                        System.exit(1);
              try {
                // Get the input channel
                   in = new BufferedReader(new InputStreamReader(socket.getInputStream()));
            } catch (IOException e) {
                System.err.println("ERROR: I/O error");
                System.exit(1);
              // Create a DocumentBuilder to convert the socket's incoming String
            // to a XML parsed Document
              Document XMLmessage =null;
            DocumentBuilder builder = null;
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
              try{
                   builder = factory.newDocumentBuilder();
            } catch (ParserConfigurationException PCE) {
                System.out.println(PCE.toString());
              try{
                String messageRead = "";
                char caracter;
                StringBuffer sb = null;
                   // Read from the socket until \0
                   sb = new StringBuffer();
                   caracter =(char)in.read();
                   while(caracter != '\0'){
                        sb.append(caracter);
                        caracter = (char)in.read();
                   messageRead = sb.toString();
                   System.out.println("Recieved: "+messageRead);
                // Parse the read message
                   try{
                        XMLmessage = builder.parse(new InputSource((Reader)new StringReader(messageRead)));
                        // Work with it
                        handleIncomingMessage(XMLmessage);
                   } catch(IOException IOE){
                        System.out.println(IOE.toString());
                   } catch(SAXException SE) {
                        System.out.println(SE.toString());
              } catch(IOException IOE){
                   System.out.println("ERROR: I/O error");
    }hope it helps!
    any comment about the code will be welcome

  • File is corrupted error while creating excel using xml

      Hi have created one excel file using XML code and sent it to mail as attachement. But when i open it, it displays error  message - file is corrupted and cannot be opened.
    below is my code - please review and tell what is wrong in it ASAP :
    * Creating a ixml Factory
       l_ixml = cl_ixml=>create( ).
    * Creating the DOM Object Model
       l_document = l_ixml->create_document( ).
    * Create Root Node 'Workbook'
       l_element_root  = l_document->create_simple_element( name = 'Workbook'  parent = l_document ).
       l_element_root->set_attribute( name = 'xmlns'  value = 'urn:schemas-microsoft-com:office:spreadsheet' ).
       ns_attribute = l_document->create_namespace_decl( name = 'ss'  prefix = 'xmlns'  uri = 'urn:schemas-microsoft-com:office:spreadsheet' ).
       l_element_root->set_attribute_node( ns_attribute ).
       ns_attribute = l_document->create_namespace_decl( name = 'x'  prefix = 'xmlns'  uri = 'urn:schemas-microsoft-com:office:excel' ).
       l_element_root->set_attribute_node( ns_attribute ).
    * Create node for document properties.
       r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT'  parent = l_element_root ).
       l_value = sy-uname.
       l_document->create_simple_element( name = 'Author'  value = l_value  parent = r_element_properties  ).
    * Styles
       r_styles = l_document->create_simple_element( name = 'Styles'  parent = l_element_root  ).
    * Style for Header
       r_style  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Header' ).
       r_format  = l_document->create_simple_element( name = 'Font'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Bold'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Interior' parent = r_style  ).
       r_format->set_attribute_ns( name = 'Color'   prefix = 'ss'  value = '#92D050' ).
       r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss'  value = 'Solid' ).
       r_format  = l_document->create_simple_element( name = 'Alignment'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Vertical'  prefix = 'ss'  value = 'Center' ).
       r_format->set_attribute_ns( name = 'WrapText'  prefix = 'ss'  value = '1' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
    * Style for Data
       r_style1  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style1->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Data' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style1 ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
    * Worksheet
       r_worksheet = l_document->create_simple_element( name = 'Worksheet'  parent = l_element_root ).
       r_worksheet->set_attribute_ns( name = 'Name'  prefix = 'ss'  value = 'Sheet1' ).
    *  r_worksheet->set_attribute_ns( name = 'Protected'  prefix = 'ss'  value = '1' ).    " WORKING
    * Table
       r_table = l_document->create_simple_element( name = 'Table'  parent = r_worksheet ).
       r_table->set_attribute_ns( name = 'FullColumns'  prefix = 'x'  value = '1' ).
       r_table->set_attribute_ns( name = 'FullRows'     prefix = 'x'  value = '1' ).
    * Column Formatting
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '40' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '140' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '150' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
       r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).
       r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '90' ).
    * Blank Row
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
    * Column Headers Row
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
       r_row->set_attribute_ns( name = 'AutoFitHeight'  prefix = 'ss'  value = '1' ).
    * RFQ No.
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ No.'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * RFQ Line Item No
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Line Item No.'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Material
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Material'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Quantity
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Quantity'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  Order UNIT
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Order Unit'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  Delivery Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Delivery Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  RFQ Creation Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Creation Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    *  RFQ Deadline Date
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'RFQ Deadline Date'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Price
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
       r_data = l_document->create_simple_element( name = 'Data'  value = 'Net Price'  parent = r_cell ).
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    ** Login
    *  r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
    *  r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
    *  CONCATENATE 'Login - ' lv_date+6(2) '/' lv_date+4(2) '/' lv_date+0(4) INTO l_value.
    *  r_data = l_document->create_simple_element( name = 'Data'  value = l_value  parent = r_cell ).
    *  r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    * Blank Row after Column Headers
       r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
    * Data Table
       LOOP AT it_final1 INTO wa_final1.
         CLEAR l_value.
         r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
    * RFQ No.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         CLEAR l_value.
         l_value = wa_final1-ebeln .
    *    CONDENSE l_value NO-GAPS.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value  parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    * Line Item No
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-ebelp.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'Number' ).                               " Cell format
    * Material
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-txz01.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    * RFQ QTY
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-ktmng.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
         r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'Number' ).                               " Cell format
    * UNIT
         CLEAR l_value.
         r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
         r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
         l_value = wa_final1-meins.
         r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell

    How to make a particular column non editable?
    Make your style protected and pass that style name to your required column while passing data.
    for example:
    Find below the code for protection of a style.
    Last two lines are very important.
    * Style for Headert
       r_style  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).
       r_style->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Headert' ).
       r_format  = l_document->create_simple_element( name = 'Font'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Bold'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Interior' parent = r_style  ).
       r_format->set_attribute_ns( name = 'Color'   prefix = 'ss'  value = '#B2FF64' ).      
       r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss'  value = 'Solid' ).
       r_format  = l_document->create_simple_element( name = 'Alignment'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Vertical'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'WrapText'  prefix = 'ss'  value = '1' ).
       r_border  = l_document->create_simple_element( name = 'Borders'  parent = r_style ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Bottom' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Left' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Top' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Border'   parent = r_border  ).
       r_format->set_attribute_ns( name = 'Position'  prefix = 'ss'  value = 'Right' ).
       r_format->set_attribute_ns( name = 'LineStyle'  prefix = 'ss'  value = 'Continuous' ).
       r_format->set_attribute_ns( name = 'Weight'  prefix = 'ss'  value = '1' ).
       r_format  = l_document->create_simple_element( name = 'Protection'  parent = r_style  ).
       r_format->set_attribute_ns( name = 'Protected'  prefix = 'ss'  value = '1' ).

  • Printing Arabic text in Oracle Application(R12i) using XML Publisher.

    Hi,
    I am using Oracle Application R12i version with Oracle database as 10g, base language as English and installed language as Arabic.
    I am trying to print the data which is there in English/Arabic in Oracle Application(using XML Publisher).
    I've created a rdf using Report Builder 10g and registered as concurrent program (XML as Output format). There after i executed the concurrent program and generated the XML file.
    Based on the XML file, i created a rtf file using XML Desktop(in Ms word) and register the same rtf file in XML Publisher Administrator for creating the XML definition and Template and Output as PDF.
    After creating a XML template, when i executed the Concurrent program, english text is shown in english but arabic text is shown some ascii characters like Question Mark(up side down).
    Could anyone please let us know the steps for doing the same or plz let us know are we missing any step.
    Quiet urgent.
    You could also reply to [email protected]
    Thanks in advance
    Your help will be appreciated.
    Edited by: user10772035 on Aug 20, 2009 10:23 PM

    Same Problem here, if you are able to solve it, please also help me.

  • Update multiple InDesign documents using XML

    I am looking for a solution to update multiple files using XML.
    We have over 100 resumes in indesign and each resume has about a dozen projects (name, size, cost, location)
    I would like to keep all of the projects in a master file "projects.xml" and then basically populate each resume from this file. This would allow me to make one change to a project and have that project update across all the resumes.
    This file would be edited and probably rearanged frequently. I have a basic understanding of XML but am not sure how moving the order of projects within the XML file will effect the resumes.
    My question is what type of issues would I be faced in working this way and how could I tackle them. Any workflow or advice would be very helpful.
    -Justin

    In my understanding, the order of different elements in the XML file wouldn't matter - the order is set by the style sheet (XSLT) file.
    I can't give any real suggestions though, except to consider a third party plugin which would make any XML solution much easier - XMPie, DesignMerge, StudioID etc. You could then reference a database (Access/Excel/csv) containing columns for name, project1, project2... and set the project info to only display if there is a corresponding entry in the database file.

  • Creating schemas using xml data

    Hi
    I have a situation where I need to create
    database schemas dynamically using <xml> data.
    Any help in this regard will be much appreciated.
    Thanks
    Radheep

    I'm not sure how to write a Web Service, however data can be read from a flat file using XML Data > Load, however the flat file has to be formatted with appropriate XML tags, such as...
    <data>
      <variable name="Test">
        <row><column>1</column><column>2</column></row>
        <row><column>10</column></row>
      </variable>
    </data>
    In addition, you have to write a scriptlet that resides on a web server, with which Xcelsius can communicate. Once your data is formatted, it is as simple as referencing the file location in the XML Data URL: field.
    Web Service is a very popular solution, and probably better than XML Data in this case due to the large volume of data.  If you do a forum search for "Web Service" you'll find many threads regarding its usage.

  • Storing xml file (NOT XML DATA) in oracle database

    Hi,
    i want to know if is it possible to store whole xml file (eg: abc.xml) as one variable (CLOB) in one of the columns of a table..
    i dont want the data contained in the abc.xml to be stored in table/database, but the whole abc.xml file, including all the < and > symbols,, basically a text file.
    Thanks,
    RK

    Hi,
    I need to store the data from XML file in table using XML Parser for PL/SQL can anyone please help me out with this my database version is 8.1.7. I even need help on creating XML file using XML Parser for PL/SQL, any help in this regard will be a boon for me.
    Best Regards,
    Vijay Sehgal

  • Update Database Through XML file using SAP B1 business objects

    Hello everyone,
    I am facing a problem ie I am not able to update the Database(SQL 2000) through an XML file.
    Though i am able to insert the data in the databse using xml file but unable to update that data.
    The tables i want to update are OITM,ITM1,OITW. While i was trying to update  the Databse i was getting an error ie " -1107 Object's key is not set".
    I dont want to use DTW for importing or anything.
    Kindly help me out why i am facing this problem asap...

    Hi Pranay,
    My case was that I wanted to replicate an item from one company to another (I guess that's your case also). What I finally did is copy field by field the objects I needed. Later I've find out the solution given here,
    Copy items between databases
    but I haven't try it out. I expect your comments about it :).
    Regards,
    Ian

  • Problem when loading xml file using sql loader

    I am trying to load data into table test_xml (xmldata XMLType)
    i have an xml file and i want whole file to be loaded into a single column
    when i use the following control file and executed from command prompt as follows
    sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl direct=true;:
    LOAD DATA
    INFILE *
    TRUNCATE INTO TABLE test_xml
    xmltype(xmldata)
    FIELDS
    ext_fname filler char(100),
    xmldata LOBFILE (ext_fname) TERMINATED BY EOF
    BEGIN DATA
    /u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml
    the file is being loaded into table perfectly.
    unfortunatley i cant hardcode file name as file name will be changed dynamically.
    so i removed the block
    BEGIN DATA
    /u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml
    from control file and tried to execute by giving file path from command line as follows
    sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl data=/u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml direct=true;
    but strangely it's trying to load each line of xml file into table instead of whole file
    Please find the log of the program with error
    Loading of XML through SQL*Loader Starts
    SQL*Loader-502: unable to open data file '<?xml version="1.0"?>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<Root>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<Type>Forms</Type>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '</ScriptFileType>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<Type>PLL</Type>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '</ScriptFileType>' for field XMLDATA table TEST_XML
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: No such file or directory
    SQL*Loader-502: unable to open data file '<ScriptFileType>' for field XMLDATA table TEST_XML
    please help me how can i load full xml into single column using command line without hardcoding in control file
    Edited by: 907010 on Jan 10, 2012 2:24 AM

    but strangely it's trying to load each line of xml file into table instead of whole fileNothing strange, the data parameter specifies the file containing the data to load.
    If you use the XML filename here, the control file will try to interpret each line of the XML as being separate file paths.
    The traditional approach to this is to have the filename stored in another file, say filelist.txt and use, for example :
    echo "/u01/APPL/apps/apps_st/appl/xxtop/12.0.0/bin/file.xml" > filelist.txt
    sqlldr $1@$TWO_TASK control=$XXTOP/bin/LOAD_XML.ctl data=filelist.txt direct=true;

  • Procedure for read/write an XML-File using UCCX9

    Hi Team!
    Is there someone who can explain me the procedure of reading/writing an XML-File using Cisco UCCX Rel. 9.0?
    In the last couple of days I did a lot of research on the partner community as well as reading the CRS-Editor-PDFs.
    But I can’t find a solution.
    There are some templates available but they all didn’t seem to work.
    I have two xml-files, both uploaded to “Document Management\en_us\”.
    The script itself is attached to this posting.
    I build that my script according to a sample script I found in the community.
    From my point of view I have configured my script exactly like the sample script.
    But it still doesn’t work.
    I am especially interested in where to store the the appropriate files.
    I would be very happy if there is someone who can explain me, what’s wrong there.
    Many thanks in advance.
    Kind regards
    Michael

    I'm experiencing the same issue [reading XML causes errors that say things from "no such file" to some odd Java exception.] I'm able to use a template XML file and after authenticating a user, transform the template into a proper XML file and then successfully save it to the en_US Doc Repository with updated values.
    However, no matter what I've tried or who I've asked, the READ on the XML file so that I can actually script something that does some routing based on the value of the XML file created in my first script? Ultra fail.
    I've even worked with three separate TAC IPCC engineers who were able to reproduce the issue in their test environment, but they were unable to assist. Eventually, whe pressed, I received this response from the last IPCC engineer.:
    "Hello Brad,
    Yes I know what I provided you with is what you already have achieved and this missing step is precisely what you need: how to setup the script to check the status and value of this XML document and then decide routing according to the state.   But unfortunately this is what I found internally.  The other resources are the ones you already know:  support forums, scripting guides.  The other resource with suggest to customer looking for script assistance is the Cisco Account Manager of your company, they know where to get the resources for such issues.   Then again as I mentioned before on our phone conversation TAC does not support scripting but certainly if I find something else on my side I will let you know for sure."
    I would do ponderous cartwheels of joy if someone who has this working in version 9.x [9.0.2 specifically] could share the deep magic.

Maybe you are looking for

  • Permissions errors after clean installation of 10.7.2

    hey, I'm sorry for the length of this thread. after upgrading to Lion (via mac app store) from the newest snow leopard, the system's performance had become worst. then, i decided to back up all of my files manually and do a clean install making a lio

  • How do i remove itunes from the control panel?

    Hi all, i have spent the past few weeks browsing these forums and others trying to find a solution to my problem. I am trying to remove all traces of the itunes program off my computer so that i can download the new copy. I have tried uninstalling it

  • How to remove sql statement in spool output?

    Hi Gurus, If my spool query is like this set feedback off set verify off set trimspool on set heading off spool c:\test\test.csv select * FROM test; spool offI am getting my csv file as like this: SELECT * FROM test1 SSO                  shsrgh      

  • Using trim with SQL

    I've attempted to use trim() im my SQL statement but It throws an error saying its not a valid function. This isnt the statement but this is the context im using it in. <cfquery datasource="#datasources.DATADSN#"> INSERT INTO dbo.People (Christian) <

  • Sales bom - parent item

    when i create a sales bom, all the components display as independent items on the picklist. why? and it also does not display the parent item. the picker needs to see this information! how can i make that show up on the picklist? any ideas?