Files in Bridge vis-a-vis files in Book panel

I just discovered that files in Bridge do not update when the file is opened, modified, and saved in the Book panel.
Do I need to do a Save As to update the files in Bridge? I'll be sending the individual files in Bridge to the print service bureau.
Right now I need to ftp the files to our tech editor. I take it I'd be better off sending individual files from Bridge rather than sending the .indb file, right. I can just imagine the cute little running Fetch puppy morphing into a snarling Pit Bull if I tried uploading the .indb file, which is about 2GB right now.
Thanks,
Toni

Hi Bob,
I appreciate the feedback. I'll definitely not send the individual files as a book. Other than that, the print service bureau requests the live INDD files, links, and fonts--not PDFs.
We've already done wet proofs, which were mainly to make sure I had the color corrections right. They're perfect, which was a big relief because I've never done color correction before. The wet proofs included a dozen or so scanned and Photoshopped photos from two pamphlets printed before 1920. We were worried about a moire effect, but the scanning was done correctly. The vintage photos in the wet proofs are wonderful.
We've also done digital proofs of 24 pages from the book and wet proofs of the cover. They wanted all of the PSD, AI, and of course, the INDD files, along with the fonts. Again, the proofs are perfect. There are litterally hundreds of illustrations and photos images in the book (it akes a 16GB flash drive to back up the project), so I've had to be meticulous about mainintaing the file-naming conventions and folder organization.
To wit, getting all of the digital ducks in a row is the least of my worries. My biggest worry is hitting the disk-out date.
One thing I can say for certain: InDesign is a MIRACLE. If it were a guy, I'd ask it to marry me.
Cheers,
Toni (or Miss Toni, as they call any woman over 21 here in the South)

Similar Messages

  • I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant.  The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

    I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant.  I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

    I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion   Start up assistant wouldn't see my extrnal drive with the Time Machine files on it.  After many tries, I skipped the restore there and let the system boot.  I could see my external drive from Finder and the files looked OK.  I was told to use Migration Assistant and it had the same problem.
    I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD.  I went ahead and told it to continue and it started to restore my apps, settings, and documents.  It's been going for a couple of hours, and is close to being done.  I expect to see my old system restored when it is finished.
    Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
    It's been a month or so since your post  Did your get it to work?

  • Search have no access to files in control panel

    I operate windows 8. Normally when I need for some files in control panel such as device manager, windows update. All I need is to search it from search button on the right side of windows.
    However, one day most of the shortcut if not all are no longer accessible. It says, "This file does not have a program associated with if for performing this action. Please install a program or, if one is already installed, create an association in
    the Default Programs control panel."
    Please help me, thank you and regards.

    Hello LW130003,
    Do you mean you have the two issues?
    1. Do you mean that you can’t use the search function in control panel? You can only use the search function by using the shortcut Win+S?
    2. When you open any shortcut, you will receive error message ‘This file does not have a program associated with if for performing this action..’?
    Please take the following steps for troubleshooting:
    1. Create a new account, log on the account and check if the issue still exists in the new account.
    If the issue doesn’t exist in the new account, please refer to the following article to fix a corrupted user profile.
    http://windows.microsoft.com/en-us/windows/fix-corrupted-user-profile#1TC=windows-7
    2. If you have issue in open all shortcut in Windows 8, please refer to the following article to restore the registry.
    http://www.eightforums.com/tutorials/8486-default-file-associations-restore-windows-8-a.html
    Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please refer to the following KB to back up the registry key before you change the registry.
    http://support.microsoft.com/kb/322756
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of files

    I have purchased an new PC since my oriiginal PC crashed after 5 years of use.  I want to transfer my iTunes files from my iPAD and iPOD to my new PC.
    How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of files

    The text below is copied from this discussion.
    https://discussions.apple.com/message/11527071#11527071
    Authorize your new computer's iTunes first - Store>Authorize this computer.
    1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    2) Now connect your iPad to your laptop and start iTunes.
    3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
    4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
    5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
    6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
    If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
    This discussion has much of the same information and even some more helpful tips.
    https://discussions.apple.com/thread/3305461

  • Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for usi

    Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
    == This happened ==
    Every time Firefox opened
    == I just noticed it. It probably happened when I upgraded foxfire.

    <u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
    Turning the Menu Bar on and off is a new feature in version 3.6.
    ''(Linux & OSX see: [[Menu bar is missing]] )''
    <u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M
    <u>''Windows'' Method 2.</u> Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
    The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
    See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    <u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
    <u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
    <u>'''Full Screen mode'''</u>
    http://kb.mozillazine.org/Netbooks#Full_screen
    Also see:
    ''' [[Back and forward or other toolbar buttons are missing]]'''
    '''[[Navigation Toolbar items]]'''

  • How to save book in pdf tiff 300 dpi? with these steps file -print book- PDF- save PDF to folder as TIFF 300 dpi does not work

    how to save book in pdf tiff 300 dpi?
    with these steps file -print book- PDF- save PDF to folder as TIFF 300 dpi does not work

    Hi pissedadobeuser,
    Does this issue occur with any particular web page?
    Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
    Which Browser version, OS version and Acrobat version are you using?
    Regards,
    Rave

  • IPad2... after synch with my Mac, I now have numerous duplicates of the same PDF files in Books.  Can't select them to delete them.  Can't move them.  Any suggestions?

    iPad2... after synch with my Mac, I now have numerous duplicates of the same PDF files in Books.  Can't select them to delete them.  Can't move them.  Any suggestions?
    <Email Edited by Host>

    Hi sdfulbright,
    Open iTunes, and under View, select "Show Sidebar". The old sidebar you are used to will show up, and everything will work the way it did under the old iTunes.
    Hope this helps!
    Cheers,
    GB

  • May by anyway view Local Network files[e-book] or videos or html pages, from the main PC

    In ipad 3 upgraded to 4 ios, may by anyway view Local Network files[e-book] or videos or html pages, from the main PC if, this main has local host[php/mysql] or, from the local network itself: eg //user/downloads/pdf/ebook1.pdf?

    In ipad 3 upgraded to 4 ios, may by anyway view Local Network files[e-book] or videos or html pages, from the main PC if, this main has local host[php/mysql] or, from the local network itself: eg //user/downloads/pdf/ebook1.pdf?

  • Placing/Embeding an eps/Ai file in flex panel

    Hi All,
    I want to display the preview of ai/eps file in flex panel
    Does there exiost a way using which I can do this?
    I have tried with Image control but it can embed only jpg/gif/png/swf format
    Please help me
    Thanks in advance
    Alam

    Tell whomever is emailing the file to zip it first.

  • Why does "Print Booklet" not print all the files in book?

    My new Indesign CS4 will not let me do what I was able to do easily with Pagemaker 6 and Indesign CS2.  When I go to “Print Booklet”, the program will not print the entire book, but only whatever file is check marked at the bottom of the WINDOW tab on the Menu Bar. I have tried with the files in the BOOK Menu selected and not selected. No difference. I have tried every way I can think of to add and link the files indicated in the Book Menu to the actual files. Each time the same. I have reinstalled the program. Still the same. I am using a Mac PowerBook G4 with OS X 10.4.11.  Your ideas and help will be greatly appreciated..........Richard

    Sorry, Print Booklet simply isn't designed to be used with multiple files. You'll notice it isn't available in the Book Panel menu.
    You could export the entire book to PDF, then place the PDF in a new document and use Print Booklet to print that.

  • Outlook 2013 weather bar does not show in the File- Options- Canlendar panel

    I installed a chinese office 2013, the machine can connected to internet properly. after I created a profile and logon to outlook, I found the weather bar section was not displayed in the File->Option->Canlendar panel although I configured to install
    all the components and features of office 2013. Please see below snapshot:
    I tried all the possible solutions which others mentioned from the web site, including set the system registry disableWeather to zero, which mentioned in
    http://msdn.microsoft.com/en-us/library/office/jj228383.aspx ,and
    "... Verify that Office is enabled to connect to the Internet – go to the Privacy options tab of the Trust Center in the Office Fluent Backstage view, and make sure that Allow Office to connect to the Internet is checked. ..."
    All these can not solve my problem, weather bar disappeared in the Calendar panel any way.
    Is anyone help me give some hints or suggestions, I really appreciate your any help!
    Best Regards, Emily

    Hi,
    Thank you for posting in the MSDN Forum.
    Since the issue is more relate to the end-user, I'd like to move it to Outlook IT pro forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    Best regards
    Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Add missing plugin Indesign file to book

    Is it possible to add the InDesign file in book which is showing  "Missing Plug-in" message. If i try to add manually also, it shows the below error message:
             "File uses one or more plug-ins that are not currently available on your system. Cannot add this document to book."
    Anyone give me suggestion how to handle this.

    I think this is version problem.
    Are you adding a higher version InDesign to lower version. [Eg. Adding a CS3 document to CS2 book].
    If its true then, Open the document in oringal version[CS3] and export as INX and open the exported INX in lower version [CS2]. Then save as new indd and add it to the Book.
    Regards,
    Ramkumar .P

  • Launch daemon's, I have deleted the files in the folder and can not log in to recover the files , safe book didn't help can you ?

    Launch daemon's, I have deleted the files in the folder and can not log in to recover the files , safe book didn't help can you ?

    - Can you use Target Disk Mode : How to use and troubleshoot FireWire target disk mode  to assist to recover the files.
    - Need another Mac and a Firewire cable
    Cheers

  • Endnotes for multiple  files in book

    I have  reviewed  several of the  posts about endnotes and now  am not sure which method to follow. I have  a book file with more than 70  files. Each of these files [a chapter] has endnotes which are to appear all at the end in one chapter called endnotes. they restart numbering  for every chapter [i.e. chapter 1 has  endnotes 1-5, chapter 2 has endotes 1-9, etc]
    The problem is that the text  has already been carefully formatted  and I don't want ot lose the formattign - so I cannot  simply reimport the word file- which  has the endnotes  manually  with numbers like 3, 4, 4.1, 4.2, etc.] I'd liek to make the endnotes dynamic as I must  prepare teh document for  Kindle and epub as well.
    i mus t now insert the  endnotes manually in each chapter - i know  of the script to convert footnotes ot endnotes. But it is my understanding that  teh  script will place teh endnotes at teh end of each chapter/file. If I then try to copy  these all into one file at teh end - I'm pretty sure I will lose the  dynamic links.
    I could try  to  do this using cross-reference but from what i've read it's pretty flaky across multiple  documents and prone to crashing.
    I could also  combine all my  separate chapters into one humongous file - using the  "move" pages command.
    This will be  very tedious and seems to defeat teh whole purpose of the  book but will enable me to use the  footnotes to endnotes  script.
    Which is the lesser of 2 evils -or is there something else I can do?

    Hmmm... if you're not using a script to do this conversion, you might need to do this by hand. Have a look at this tip I just wrote-up for a previous question. It might give you an idea. See: http://forums.adobe.com/message/5923811#5923811
    In your case you'd only continue the numbering across stories, not documents in a book.
    Cari

  • How do I select more then one channel to view in tdms file viewer graph panel

    I have a TDMS file that I can view with the labview 2013 TDMS file viewer and I can select one signal out of 15 signals to view on the graph panel. however I would like be able to look at 2 or 3 signals
    on the same graph but can't seem to be able to select more then one signal at a time. Is there a way to select more then one to view?  

    I've modified the TDMS viewer in the past to allow selecting multple channels.  It's a little bit of a pain because the tree control in the viewer only allows you to select one item.  You have to edit the tree to allow multiple items.  Now your selection is an array instead of a scalar.  This means the rest of the code has to be updated, and the references to the tree in subVIs need to be updated.  Not impossible but it takes some time.  Alternativly open it in Excel with the free add-in then you can select the two columns you want and insert a graph.  Not as simple for the user but using Excel, which users should be familiar with might mean users need less training on data files.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Maybe you are looking for