FileSystem API support in Safari?

Hi
I was trying to run this filesystem api demo: http://html5-demos.appspot.com/static/filesystem/filer.js/demos/index.html
in Safari. It says browser not supported.
Is Browser FileSystem API supported in Safari? If not will it be supported in future?
- Ambili

Safari (and mobileSafari) rely on WebKit - you may want to check there for hints on future direction and see if you can lobby them accordingly.
http://webkit.org

Similar Messages

Why css3 property animate , rotate page in from front not working in safari 5, but animate property is supported in safari 5 and i have used both "-webkit-animation" and "@-webkit-keyframes". Plz if any1 have any solution ? thanks in advance

-webkit-animation: rotatePageInFromRight 1s cubic-bezier(.66,.04,.36,1.03) 1 normal forwards;
@-webkit-keyframes rotatePageInFromRight {
0% {
    -webkit-transform: rotateY(-90deg) translateZ(5em);
          -moz-transform: rotateY(-90deg) translateZ(5em);
          -ms-transform: rotateY(-90deg) translateZ(5em);
          -o-transform: rotateY(-90deg) translateZ(5em);
    transform: rotateY(-90deg) translateZ(5em);
    opacity: 0
30% {
    opacity: 1
100% {
    -webkit-transform: rotateY(0deg) translateZ(0);
          -moz-transform: rotateY(0deg) translateZ(0);
          -ms-transform: rotateY(0deg) translateZ(0);
          -o-transform: rotateY(0deg) translateZ(0);
    transform: rotateY(0deg) translateZ(0);
    opacity: 1

Post in the developer forums instead > Developer Forums: Apple Support Communities
This is the Safari for Mac OS X community.
Be aware, Apple no longer supports Safari 6 for Windows in case you are not aware > Apple apparently kills Windows PC support in Safari 6.0

Cannot disable Acrobat PDF support in Safari

I want to disable Acrobat PDF support in Safari. I open Acrobat 8.0.1, go to Preferences>Internet, and uncheck "Display PDF in browser using Acrobat 8.0.1". I click OK.
However, when I quit Acrobat and Safari and re-opened Safari, Acrobat PDF was still enabled. I went back to Acrobat, opened up Preferences, and sure enough the "Display PDF in browser..." checkbox was checked again!
So I unchecked it once more and clicked OK to close Preferences. I figured I'd open Preferences once more to see if it worked - and to my amazement "Display PDF in browser..." was checked again!
It seems it is impossible for me to turn this off. Any ideas how I can disable this without uninstalling Acrobat?
I've tried going to Help>Repair Acrobat to disable the PDF plug-in, but it doesn't appear in the list. The only plug-in listed is the one for making PDF files from Microsoft Office applications.

Chris,
Go to HD/Library/Internet Plug-Ins/ and remove AdobePDFViewer.plugin.
...Mike

Downloading new safari on my iPad and says my browser does not support new safari.

Trying to download new safari 5 on iPad 2 and says that browser does not support new safari. Doing this because yahoo mail has upgraded and needs safari 5. Do I need to do this thru iTunes? Regards kc

Ummm...Safari 5 doesn't run on the iPad. It runs on Mac OS and Windows.

Disable password support in Safari 6?

I use a third-party password manager, so would like to disable automatic password support in Safari 6. It doesn't appear possible to do this in Preferences (or I missed it). Has anyone identified a way to do this (e.g., via a defaults setting), so that I don't constantly see drop-down sheets when I enter a password on a website?
Also, I can't seem to edit all of the passwords that *are* in Safari (where I accidentally hit return when the sheet appeared). I can delete one password, but then when I try to highlight others and delete them, nothing happens.
Thanks.

It is a little odd but they did not put the option in the passwords options but instead in the AutoFill options.
Simply open the safari > preferences > autofill and uncheck the "User names and passwords" checkbox. I found the solutions here:
http://www.infiniteloopmobile.com/2012/07/safari-6-0-tweak-turn-off-save-passwor d-prompts/

API Support.DLL Specified Module Could Not Be Found Error

Dear Sir/Madam,
While Starting my laptop the following error message is displaying on my desktop screen:
"There was a problem Starting
C:\user\dell\app data\local\conduit\API support\API support.dll
The Specified Module could not be found"
Kindly help me to resolve this problem as soon as possible.
Regards,
Chirag Agarwal
{REMOVED}

Hi,
Please try to restore the system back to the point before the issue happened.
If the issue persists, test in Clean boot mode and Safe mode.
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
half services.
Let us know which service or startup cause this pop-up.
Kate Li
TechNet Community Support

API support for color extraction feature

Is there API support for color extraction feature? if not, is
it scheduled?

Hello, thanks for the post.
In order to provide the best user experience for color
extraction, we had to split the functionality between client-side
and server-side, so we are not able to offer an API for this
functionality at this time. We are, however, very interested in
feedback on what kinds of APIs are interesting to you and how you
are interested in using them, so folks, please let us know.
Current APIs, including the new Random theme browsing view
and to view comments to your themes, are available on the
kuler API
wiki. We've seen some really fabulous and creative use of the
kuler APIs, and we look forward to more.
Sami

Command line options / API Support to launch the sequence file

does teststand support any command line options / API Support to launch the sequence file and also populate the test run status. I want to explore the option of integrating the teststand with QC where I can launch the sequence from QC and results are sent back to QC.
Thanks in advance,
-Dilip

Hi Dilip,
Here are the command line options for TestStand v4.2.1:
Command Line Processing
Command line usage:
   seqedit.exe [<sequence file>]
               [/goto <location>]
               [/run <sequence> <sequence file>]
               [/runEntryPoint <entry point> <sequence file>]
               [/quit]
               [/setCurrentDir]
               [/useExisting]
               [<workspace file>]
      <location>: property object path to the item to display in the file
               Location examples:
                     TestExec.exe c:\example.seq /goto "Seq[\"MainSequence\"].Main[\"Power On\"]"
                     TestExec.exe c:\example.seq /goto "Seq[\"MainSequence\"].Main[\"ID#:JifH4ODTf0y1z7bJne0G7D\"]"
                     TestExec.exe c:\example.seq /goto "Seq[1].Main[4].TS.LoadOpt"
      <sequence file>: sequence file to open
      <sequence>:       sequence to run
      <entry point>:    entry point, such as Single Pass or Test UUTs, to run
      <workspace file>: workspace file to open
   You may specify multiple sequence files, sequences, and entry points.
   Quotes are required for arguments that contain a space, such as
   "Test UUTs" and "C:\My Documents\Test Sequence.seq"
I don't believe you'll get a return status of the executed sequence from the editor on close; but you could design your sequence to write the status to a file and then read that by your QC application.
-Jack

Shfsmount: shfs filesystem not supported by the kernel

I installed the shfs package through pacman, and there is a sshd running on the server. However, once I enter the command
shfsmount -P<port#> <user>@<server>:/var/www ~/websites/<server_name>/
(with the values in <> replaced by the appropriate values of course), I am able to enter the user's password and then the following error shows:
shfsmount: shfs filesystem not supported by the kernel
I have done some web/forum searching and have not found anything that helps. I have tried to build the shfs package through abs, but it seems to use an older kernel version (2.6.22) than I have (2.6.27) and the makepkg command errors out with a location-not-found type of error.
I would like to know if there is something in the abs files I need to change for it to use the correct kernel for building, or whether there is a way to get the repository package to work.
I look forward to your responses, and thanks for your time.

Well, using the sshfs method did work. However, shfsmount still returns the same error. When I installed sshfs, it also pulled in fuse, but doing
modprobe fuse
does not change anything that I can see. Is sshfs the same as shfs? They seem to be two different packages.
Also, I am using Xfce with Thunar as my file browser. When I do the sshfs method outlined in the wiki link above (which does work), Thundar acts like the folder where the mounted stuff is does not exist. When I hit refresh, the <server> folder will show up for a second, then dissapear. When I go through a text editor and open a file from there, the file opener can see the folder with no problems. I can look around in there with the terminal as well. Is there a way I can get Thunar to view that folder?

Support for Safari 3.x

I only see support for Safari 2.0 when I do a search on the
support site. I'm wondering if this is correct and if there are
plans to support the latest version of Safari?
Specifically, we are certifying one of our products on Safari
3.1.2 on the Mac, and encountered an issue where the Webhelp search
results are cut off and not displayed. (This doesn't happen on
3.1.2 on Windows.)
thanks,
--C

Welcome to the forum.
I have made some enquiries but it is likely to be a week
before I get a reply. Adobe are closed until 5 Jan.

What is the best way to be able to run certain websites that aren't supported by safari, firefox, and chrome, in other words only internet explorer?

I really need to do a class online but it wont save progress because it is not supported by safari and only works with internet explorer. What is the best way around this?

Try this with Safari ...
From the Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now from the menu bar again click Develop > User Agent
Try IE 9, 8, or 7.
An alternative is to create a partition on the Mac hard drive and install Windows using Boot Camp but that is a long and drawn out process and you would need to purchase an Window install disc.
Other ideas here > The best way to run Windows on your Mac | Macworld

Safari 2 support after safari 3 release

Hi all,
Just recently my company added safari 2 support to our website.
But tests with the beta 3 doesn't look promising.
So we have a problem when safari 3 is published...
And it takes some time to support safari 3.
The question is how long will safari 2 be downloadable and how long there will be support for Safari 2 when Safari 3 is released?
Thanks in advance...
With kind regards,
Rob Smeets

As mentioned before:
Start a new topic with your specific issues (describing it as 'flakey' doesn't help others to help you) and a fellow user like yourself should be able to help you.
So far we have no details on what your actual problems are and are unable to help you fix them. You do want them fixing I assume?
what were we supposed to do, NOT download the update?
Yes. If the download has no benefit for you, why download it? Software Update does not forcibly install it onto your system. The choice is yours.

Future native Android API support in AIR ?

Greetins,
Is Adobe planning to increase the number of native Android APIs that are accessible through AIR?
If so, is there a planned order in which this additional API support will be added to future versions of AIR SDKs?
AIR is an easier way to target Android (for me) than native Android dev with ADT. One major advantage being the Flash Builder Design View. But those advantages only go so far against the disadvantage of not being able to access all the native API's on the devices.
If the plan is to eventually support them all (within a reasonable time frame), then I can wait. If however, AIR on Android will not support any more APIs than it does now, learning JAVA for ADT dev will become necessary.
Thank you

Thanks for the responses. I posted to ideas as suggested. See link below.
http://ideas.adobe.com/ct/ct_a_view_idea.bix?c=9D564F43-979A-4E35-AA21-85A61B6AB8DE&idea_i d=97A23FF1-8471-4C26-8EC3-1FC9A9B7F29D

Does BPM API support XA transaction ? and how to control

A customer want to use ADF AM to update database and use BPM API to create todo task.
The BPM API is ToDoTask() on oracle.bpel.services.workflow.task.ITaskService.
If the BPM API support XA transaction:
1.can ADF taskflow support AM and BPM mixed transaction ?
2.can Java code control the XA transaction,not in taskflow ?

this can be achieved by using
<config-property name="TransactionIsolation" type="int">2</config-property>

Not supported by Safari

Hi - I am trying to get onto my company website (which is for personnel only, not public) but always get the message below from my Mac (not from my laptop which isn't a Mac). Would upgrading Safari make a difference? What does "it cannot redirect to locations starting with “(null):”." mean? Thanks.
The page you opened redirected you to a page that isn’t supported by Safari.
Safari can’t open the page “” because it cannot redirect to locations starting with “(null):”.

yes I have javascript ticked in the safari preferences. should I un-tick it?
Nope. Try out Tom's suggestion of using an alternative browser. I have a feeling it has all to do with poor coding - something which FireFox is more tolerant of.
Yang

FileSystem API support in Safari?

Similar Messages

Maybe you are looking for