FileVault Boot into Server mode

Question: Is there a way to use FileVault in Lion without having to enter a password each time the computer boots?
My problem is that I only need my Lion machine (one of the new Minis) sparsely and only as a small server (Not with the server verision though, too bad reviews, too risky yet). Therefore I often turn it on and off without ever actually booting into the Finder but just having him stay awake and wait to serve. This means that I don't necessarily need to hook up a monitor. That's the basic idea.
But additionally, I thought that it might be a good idea to encrypt my HD as I have company property on it. But now as the whole disk had been encrypted, the computer always asks for a password even before starting the system. This means that I always need to have a monitor and a keyboard hooked up to. And as soon as I enter a password, he boots into the Finder. But I just want him to stay at the login screen.
Is there a possible solution? Is there a possibility to just encrypt the home folder as it was before Lion? Is Lion Server better in this regard?
For me right now, the best option is to drop the encryption.

Hi faisalzia,
open system preferences and click "Classic". Select the OS 9 system folder and click "Start". Now quit system preferences and follow the directions.
The second message seems to contradict the first one. It is known that there are many games that are not compatible with MacOS X and that also require to boot into OS 9 natively and cannot run in Classic mode (Classic mode is sort of an emulation of OS 9 within MacOS X). To do that open system preferences again, select "Startup disk" and select the OS 9 system folder as boot-system. Now restart and you should boot into OS 9.

Similar Messages

Unable to boot into safe mode with FileVault 2 enabled

I was trying to boot into safe mode earlier to try and fix a few things. It looks like I can't and I suspect it is because of FV2.
When the system starts I press shift after the tone, but then I have to release shift and enter the password and then Lion will only boot into normal mode.
I've also tried with sudo nvram boot-args="-x" from the terminal, but while it seesm that this way Lion starts to boot into safe mode, after a while it just restarts as if something crashed etc and then again, I have to enter the password for FV and all again as in a loop, i.e. Lion won't even start this way.
So I went into the recovery mode and I could make Lion start again at least in normale mode with sudo nvram boot-args="".
Any idea of what could be preventing Lion from entering safe mode?
Thanks in advance

The symptom may be unrelated to FileVault 2. I encountered the symptom with FileVault 2 disabled and with backward conversion (decryption) complete.
Apple reference for my bug report: 152162960. If the symptoms on your Mac compare to those on mine: progress may seem to cease during safe fsck.
Vito, as you are comfortable with the nvram command, please try the following:
sudo nvram boot-args="-v -x"
Restart the computer and note the last verbose lines that appear before you sense that progress has ceased. Then please add a note of those lines to this topic.
Additional questions
What model is your Mac?
What type of disk for the startup volume?
How many files on that volume?
Approximately how large are the attributes file and catalog file? (You might gain this information with a demo version of iDefrag.)
My current envronment
MacBookPro5,2
8 GB memory
startup from internal 320 GB rotational disk, Serial-ATA, Hitachi HTS723232L9SA62 (probably Travelstar 7K320)
3,961,791 files
495,744 folders /* not including the root folder */
catalog file 3.0 GB, not fragmented
attributes file 2.2 GB, not fragmented.
At http://www.wuala.com/grahamperrin/public/2012/01/09/a/?mode=gallery file speedy.txt includes details of the volume.

Do I need to boot into 64bit mode to take advantage of 64bit apps?

The DAW I use just announced 64bit support. My machine is an early 8-core that will not boot into 64bit mode. Is this even necessary though? Will I still be able to access RAM beyond the 4gb cap while booted into 32bit mode?
Thanks!

2008 Mac Pro can, it is supported on server OS.
http://support.apple.com/kb/HT3770
Method 1: Startup key combination (for current startup only)
If your Mac uses the 32-bit kernel by default, but supports the 64-bit kernel, you can start up using the 64-bit kernel by holding the 6 and 4 keys during startup.
If your Mac uses the 64-bit kernel by default, you can start up with the 32-bit kernel by holding the 3 and 2 keys during startup.
Your Mac will revert to the default kernel the next time you reboot it.
Method 2: On-disk setting (persistent)
To select the 64-bit kernel for the current startup disk, use the following command in Terminal:
sudo systemsetup -setkernelbootarchitecture x86_64
http://support.apple.com/kb/HT3773
Early 2008 implemented Unified EFI which is 64-bit but you need to run 10.6.x and even then... so much for "64-bit" hardware and OS talk we heard for years.
http://macperformanceguide.com/SnowLeopard-Compatibility-software.html
Even if you cannot or do not boot the Mac OS X Snow Leopard kernel into 64-bit mode, you can run your 64-bit apps as 64-bit, and they can take advantage of all the memory in the machine. This was/is possible even with Mac OS X 10.5 Leopard. The main problem being that there are only a handful of 64-bit applications available as of September 2009.
http://macperformanceguide.com/SnowLeopard-64bit.html
Somewhere in your "default product" in your profile is where I think the forum pulls that sig

How do I boot into recovery mode with wireless keyboard

I am unable to boot into recovery mode using either cmd-R or holding down the alt key. How is it supposed to work?
Message was edited by: Niklas Brunberg (better title)

I understand your concerns - I'm glad both of my machines are dual bootable (just in case) and I have my Snow Leopard install disks..... However, this is what Apple has decided, so we need to find the best way to deal with it. Personally, I've tested the recovery mode several times and, at least on my machine, it was not reliable (i.e. it wouldn't work - I tried it again and it did, but it spent more than an hour downloading the entire 4 GB installer again and then another 30 minutes installing it), and on a third try, I found that it had vanished because I had cloned by drive. When you clone, only your system is cloned, not the extra partition.
So, I've decided to rely on a) my bootable clones and b) a copy of the installer (.dmg) in case my clones fail. I don't feel comfortable relying on something that requires an internet connection and a full download to work. But, that works for me; you may want to take a different approach.

Hard drive won't boot into safe mode

My mid 2010 Macbook Pro has suddenly decided to not boot up after installing BitDefender and running a scan.
I installed it on a whim when I saw minor malware that hijacked Safari, and decided to run a scan. While I was working on Photoshop, the scan must have finished because all of my windows disappeared and I was left with my desktop and the spinning gray loading at the bottom of my screen. I waited 20 minutes, realized it wasn't going anywhere and force shut down the Macbook by power button.
Now, I cannot successfully get it past the grey apple loading screen. Attempting to boot into safe mode still leaves it at the same screen. Tried to reset the PRAM, still can't get past the loading screen. I still have my OS disk, however it is Snow Leopard and my current is Mavericks and I'm unsure if it is a wise idea.
15 inch mid 2010 Macbook Pro running OS X Mavericks, how dead in the water am I and how much would this cost me to "fix"?

Use the original Snow Leopard installation disk and start the MBP as if you were going to reinstall the OSX. Early in the process you should see a menu bar on the top of the display. Click on UTILITIES and from the dropdown menu select Disk Utility. Run Disk Utility>First Aid, Verify and Repair. If it is not successful, the HDD will have to be replaced.
Ciao.

Can't boot into safe mode or prompt login window, need help.

Hello all,
This is cross-posted from the installations and set-up list.
Can anyone suggest a remedy for what's ailing this powerbook. its a g4 powerbook, i don't have much more info other than that. all indications are that it is running 10.2.6, although i was told that it had been updated to 10.2.8, its possible that it was updated only to 10.2.6. following the update, you get to the apple and spinning pinwheel screen and it will not proceed. literally, the pinwheel will spin for 24 hours+.
it looks like it gets to the point of the startup(login) items and hangs indefinitely. ie it will
if i start in verbose mode it will, give some clues:
truncated or malformed library: /System/Libray/Frameworks/Security.frameworks/Versions/A/Security
Some starup items failed to launch due to conflicts
/usr/libexec/crashreporterd: crashdump terminated by signal 5
init: getty repeating too quickly on port /dev/console, sleeping
/usr/libexec/crashreporterd: crashdump terminated by signal 5
last message repeated 10 times
/usr/libexec/crashreporterd: crashdump terminated by signal 5
init: getty repeating too quickly on port /dev/console, sleeping
/usr/libexec/crashreporterd: crashdump terminated by signal 5
last message repeated 5 times
this will continue to be repeated and i assume a new core.## file is sent to the /cores folder, until the hard drive is maxed out.
I can boot in single user mode and everything is fine but i cannot boot into safe mode.
fsck says the disk is fine, as does disk first aid, i have also corrected permissions, and followed many of the things that have been previously posted.
It looks like ther are conflicts with some startup items, what can i move from the starup folder and is best not to be touched?
what about the truncated library message?
also can i update to 10.2.8 from the single user mode, if i cannot get into safe mode?
any suggestions?
thanks in advance-
todd

I have solved this problem. I mounted the laptop in target mode and replaced this file:
/System/Library/Frameworks/Security.framework/Versions/A/Security
with the equivalent file from a machine running 10.2.8.
It booted all the way through then i upgraded to 10.2.8.

Won't boot into safe mode

My 2012 iMac 27" was randomly rebooting itself, while in Sleep. I assumed this was due to the cheap 32 GB memory I bought, but before I could change it back to the original memory, to test, the Mac booted into Safe Mode (I assume - a progress bar showing at the bottom of the boot screen, below the Apple logo), and did not get further than a half the way, and then shut down. I swapped the memory to the original 8GB. I tried booting again, no buttons held down, as then it wouldn't get further than a quarter of the way. Further attempts to boot do not work, even when holding down Option to choose the boot disk, pressing Shift for Safe Mode, or Option-S for Single User Mode. I assume it's trying to boot in Safe Mode, but failing?
I also tried using a good Mac with the bad Mac as the Target Disk boot mode - the good Mac does not see the bad Mac...
I have an external DVD drive, but that isn't an option as I can't go into boot drive select mode. What are my options, apart from sending the iMac back?

Booting into the Recovery HD should allow you to effect repairs - that's the point of it, so it's a bit concerning that it won't allow you to. The Recovery HD is a partition on the internal drive that should allow you to effect repairs to the Macintosh HD, albeit part of the same physical disk.
I'm no expert, but I'd be concerned that the hard disk is on the way out. Do you have backup of everything - Time Machine or a bootable clone, perhaps?
Maybe have another try with Command+r. If it fails I'm not sure what would be the best next step - it depends if you have a full and up-to-date backup of your disk so that you can restore.
One of the options of the Recovery HD is to allow you to re-install the OS, which won't delete your data.
The more extreme step would be Internet Recovery which would involve erasing everything and re-installing via the internet.
Worth reading this carefully before proceeding: http://support.apple.com/kb/HT4718
Disk Warrior from Alsoft (not cheap) is another possibility for recovering damaged disks, although it's not a guaranteed solution.

OS hangs at grey startup screen, won't boot into safe mode

I rebooted my G5 this morning and when it came back up, it hung on the grey screen with the Apple logo and the spinning 'gear' progress bar. I tried rebooting several times, but that didn't help. I tried booting from the install DVD (which it did) and ran disk utility (both verify & repair on the start up drive and on permissions. It claims to have found permission errors and fixed them.) I hunted for answers online and tried to boot into safe mode, which did not work.
Someone mentioned booting into verbose mode and I saw that the load sequence was choaking on the login.
What could the problem be and how can I fix it?

Hi Yosarian,
Minor permissions repairs are no concern: The good news is that your data is probably OK.
Three things can be happening: Some of the machines boot settings are corrupted, or the OS files or settings are damaged, or there's a hardware problem.
Resetting the machines power management chip, called a PMU or SMU, depending on your computer, and the PRAM will resolve machine boot settings problems. Run a google search for your model of Mac plus reset pmu OR smu for instructions. After that, reboot your computer and hold Option-Apple-P-R down as you power on. Hold all 4 keys until you hear the startup chime a second time.
You can test your hardware with the grey disk that came with it that ays AHT in little letters. Boot from the CD and run the extended test. Be patient: AHT can take a long time to boot and run.
If you reset your PMU and PRAM and pass a hardware diagnostic but still can't boot normally, in safe mode, or in single-user mode, the problem is system software. Reinstall from your latest installer, checking off Archive and Install and Preserve Users and Settings from the Options screen available at the screen where you choose which disk to install to.
Good luck,
John

Can I ssh to a Mac that's booted into Safe Mode?

I'm needing to ssh to a Mac that's been booted into Safe Mode (I'm already able to ssh to it in normal boot mode, and I know how to boot it into Safe Mode from the command line, i.e. sudo nvram boot-args="-x", then sudo reboot).
I can't just test this for myself, as it has to work first time, otherwise I'll be locked out of the remote Mac. If ssh would still work in Safe Mode, the plan is to then ssh to it and issue the command to set it back to normal boot mode (with sudo nvram boot-args="") and then reboot... job done.
Ideally, but not too important, I could VNC to it in Safe Mode instead, but ssh would do fine.
Does anyone know (for sure!) please?
In case anyone wondered, I'm wanting to do the Safe Boot because I'm told it can cure an issue with Adobe CS apps freaking out and locking up, crashing etc. I want to try this over the w/e, and have no physical access to the Mac. I've already set it to power on later (via pmset) - something I do routinely.
I thought an answer to this would be easy to find, but after Googling I've drawn a blank. Can't find it in any Apple docs either.
Thanks in advance!

If this was already covered somewhere else, I
apologize. I did some browsing for this topic but had
no luck finding anything...
Anyhoo, I'm trying to log in to my wife's B&W G3
(running Jaguar) from my G4 (running 10.4.2) using
secure shell but she doesn't have a password set up
on her computer. When I enter the ssh command in
Terminal, it asks for a password — I don't enter
anything and just hit the Return key. It returns with
a massage saying "Permission denied, please try
again." What can I do to log in w/o setting up her
machine with a password first?
If you want to use SSH securily I would suggest you disable password authenticaiton altogher. If you setup public key authentication it is more secure and better than using passwords anyway.
see how to setup ssh with public keys

Booting into 64bit mode with Mac Pro 2009

I am trying to boot into 64bit mode with a 2009 Mac Pro 2.93 Quad core machine. I tried holding down 6 and 4 when restarting but no luck, it staill says no in the profiler. Any ideas why?

If you'd like your Mac to always start up in 64 bit mode without having to hold down any keys, do this:
Here's the configuration file approach for always booting into 64-bit. This is the best way to make your Mac always start up 64 bit as the only thing necessary is to alter one line of a configuration file. You can do that by opening the Terminal and entering:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.Boot 'Kernel Flags' 'arch=x86_64'
To return to 32 bit mode, you would repeat the command but enter an empty string, which would just be the single quotes (where arch=x86_64 is) with nothing in between.
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.Boot 'Kernel Flags' ''
These commands are all one line, they're just wrapping here.
If at any point you find you need to start up in 32 bit mode for a single use, just as you held down the 6 and 4 keys for 64 bit, you can hold down the 3 and 2 keys for a temporary change. No need to keep changing the config file over and over.

Why doesn't Photoshop CS6 boot into Extended Mode? My GPU is Supported!

Ok got a new laptop, quad core and went to install the trial of Photoshop CS6 Extended and it will not boot into extended mode but rather the original Photoshop mode, and I know this by the splash screen with the circles and the fact there is no 3D menu. A friend did the same on his laptop (different hardware) and his booted into Photoshop CS6 Extended. We used the same Adobe Download Assistant to do our installs. My GPU is the ATI Radeon 6520G and it has support for both Open GL & Open CL. It appears in the Performance preferences with GPU checked and Open CL is selectable in advanced. Now my question is why can't I get into Extended Mode? Why can't we just force it to do so? I have seen this issue all over the place and it seems to be related mostly to ATI/AMD chipsets. Any help is appreciated, I would like to try out the 3D options.
I even tried installing the latest ATI Radeon drivers which are beta 2.7, same issue.
Thanks,
Michael

Did you download the trial version of the software directly from Adobe.com?
What Chris is trying to say is that there's no known reason why the legitimate trial version from Adobe shouldn't enable the 3D features on a system that supports GPU operations, as you've said yours does:
My GPU is the ATI Radeon 6520G and it has support for both Open GL & Open CL. It appears in the Performance preferences with GPU checked and Open CL is selectable in advanced
-Noel

Combuter boots into script mode! How do I perform regular start up?

I was on my computer (ibook G4) when the screen went black. It was still lit, but completely black. After closing it and opening it a few times, nothing changed, so I turned it off.
When I booted it back up again, it booted into the manual, black screen, white text script
mode, and I can't get out of it. All it says is :/ root #
After others did internet research for me and called Apple tech support (who weren't very helpful), these are the things I've tried that haven't worked:
typing /bin/fsck -fy after the :/ root#
(it ended up saying the HD volume was okay, and then i typed reboot, and it rebooted into
script mode still)
I also held down the following just after hitting the power button
to turn the computer on:
x
command
command + s
command + v
command + option + p + r (this is the only one that made the start up sound happen twice, but it still booted into script mode)
Every attempt either brought be to the :/root# screen again, or gave me more white text without ever helping me boot to my normal desktop. I've tried typing exit and reboot after the attempts, but to no avail.
I am from the US, but in Italy for the time being, and this is my only form of communication so I am panicking a little bit right now. This also means I DO NOT have my start up disk with me. Any help would be seriously appreciated.
-marissa

Put the disk in the computer and restart while holding the C key down. You pretend you want to reinstall the OS and go through the first two steps, until the screen just after the language selectiion screen.
On this screen you will see a menu bar. Click Utilities in the menu bar, and select Disk Utility. When DU is up and running, do this:
In the list at the left, select your start up disk- the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
When the repair is completed, quit DU and restart the computer.

HT201262 Will not boot into safe mode

Hello,
My MacBook pro 2012 crashed last night. Could not force quite so closed it down. On restart it would get halfway then stop. I have japped p-ram (I know it is my called this anymore) but then loads halfway and the turns off. I booted into disk repair and it found a couple of problems so repaired successfully. On restart it still gets halfway then turns off.
From reading the apple support it seems other people have the same problem. All mention booting into safe mode. For the life of me I cannot get my machine to boot into safe mode!
I do exactly like the instructions say but it always just goes to the page where I choose whether to log in as me or a guest.
What am I doing wrong?!
I am on a MacBook pro running Yosemite.
Many thanks for any help.
Chris.

Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

No reboot after booting into safe mode

For a few years I've just ignored the problem but thought I should take time to mention it now.
When I boot into Safe Mode (holding down the shift key during boot up) I can always click on restart when the password screen comes up and the computers will restart.
But if I log in after safe boot and let the system boot up past the login screen THEN try a restart I get hours of beach ball. I've left various computers running over night and it is always the same in the morning, no restart, no beach but lots of beach ball.
So I do a force shutdown (hold the on/off button for 10 seconds) or a forced restart.
This has been the case from Leopard OSX10.5 and up including Snow Leopard. And on five different Intel Core 2 Duo Macs including 2GHz & 2.4 GHz iMacs and Macbooks.
The common theme is that I have migrated my setup through all these Macs so maybe there is some legacy thing in my software.
Suggestions?

Well… some improvement.
Here’s what I did: (note that I did a restart and sometimes safe boot after each and every step.
1 – use FontNuke (free shareware) to blast away font cache files. It found 8 some dating from 2002.
2 – use Apple’s Font Book to reconcile duplicate fonts.
Those two steps fixed my slow down problems with playing movie files in Quicktime and VLC.
But not Skype video. The biggest CPU load with Skype is with the transmitted picture oddly enough.
Then for good measure I zapped the PRAM and PMU. No noticeable improvement from doing those. Obliviously repair permissions and verify disk was done long long ago and redone.
I still have the problem of not being able to reboot from safe mode.
The Startup folders are clean except for Qmaster which I do not believe is the cause of not being able to reboot out of safe mode.
Does anyone know of other files/locations that put 3rd party startup items? I remember finding things from Western Digital and Symantic a few years ago in unexpected places. Symantic was especially hard to track down and eliminate.

I cannot boot into safe mode

I cannot boot into safe mode
I ran onxy, all appeared ok,
I booted from installer DVD,- repaired the drive, - nothing wrong with the drive,
and repaired disk permissions, twice, as a few permissions were incorrect
The only app which automatically logs in user account is KeyCue, and has done so always, and I don't know what what it belongs to. Nothing logs in automatically in the admin account.
I intermittently have a problem with DVDs not mounting, and a safe boot fixes the problem.

further to being unable to boot in safe mode-
normally when i boot in safe mode, when its starts up and reaches the login screen, above this are the words in red safe boot. As the words were missing from the login screen I had assumed that I was not in safe boot. I currently have about 94 GB of HD space. Other than this booting process appears to be normal. What prompted the safe boot was a DVD which mounted ok on insert, had unmounted when I went to eject, a restart and holding down the shift key ejected the disk, and I then tried to do the safe boot. Since I ran disk utility from the installer disk the same DVD has mounted and ejected just fine. The vanishing disk problem started 4-5 months ago, and has always been fixed by a safe boot

FileVault Boot into Server mode

Similar Messages

Maybe you are looking for