Fill a table with multiple records

REPORT REPORT1.
DATA: wa_itab1 LIKE TABLE1.
DATA: wa_itab2 LIKE TABLE2.
DATA: itab1 TYPE STANDARD TABLE OF TABLE1,
      itab2 TYPE STANDARD TABLE OF TABLE2.
DATA: v_dat TYPE d VALUE '20080101'.
SELECT * FROM TABLE1 INTO TABLE itab1.
LOOP AT itab1 INTO wa_itab1.
wa_itab2-FIELD1 = wa_itab1-FIELD1.
wa_itab2-FIELD2 = wa_itab1-FIELD2.
wa_itab2-FIELD3 = wa_itab1-FIELD3.
wa_itab2-FIELD4 = v_dat. "pass the initialized date
APPEND wa_itab2 TO itab2.
v_dat = v_dat + 1. " increment the date
IF v_dat GT '20080105'.
    EXIT.
ENDIF.
ENDLOOP.
MODIFY TABLE2 FROM TABLE itab2.
I have the program above which is not doing exactly what I need. Lets say TABLE1 has 3 records
FIELD1 FIELD2     FIELD3
PLANT1 STOR_LOC1 20
PLANT2 STOR_LOC2 30
PLANT3 STOR_LOC3 40
The loop is for 5 days so in TABLE2 I want to see the following
FIELD1 FIELD2     FIELD3 FIELD4
PLANT1 STOR_LOC1 20     20080101
PLANT2 STOR_LOC2 30     20080101
PLANT3 STOR_LOC3 40     20080101
PLANT1 STOR_LOC1 20     20080102
PLANT2 STOR_LOC2 30     20080102
PLANT3 STOR_LOC3 40     20080102
PLANT1 STOR_LOC1 20     20080103
PLANT2 STOR_LOC2 30     20080103
PLANT3 STOR_LOC3 40     20080103
PLANT1 STOR_LOC1 20     20080104
PLANT2 STOR_LOC2 30     20080104
PLANT3 STOR_LOC3 40     20080104
PLANT1 STOR_LOC1 20     20080105
PLANT2 STOR_LOC2 30     20080105
PLANT3 STOR_LOC3 40     20080105
At the moment the program gives me
FIELD1 FIELD2     FIELD3 FIELD4
PLANT1 STOR_LOC1 20     20080101
PLANT2 STOR_LOC2 30     20080101
PLANT3 STOR_LOC3 40     20080101
Do I need a WHERE clause and if so how do I add assuming that the equal fields are FIELD1 and FIELD2? Thanks

I have added a DO condition to the program and tried a couple of attempts. The latest is below. With this attempt I get 80,000+ records the majority of which do not have the fields filled. Thanks
REPORT REPORT1.
DATA: wa_itab1 LIKE TABLE1.
DATA: wa_itab2 LIKE TABLE2.
DATA: itab1 TYPE STANDARD TABLE OF TABLE1,
itab2 TYPE STANDARD TABLE OF TABLE2.
DATA: v_dat TYPE d VALUE '20080101'.
SELECT * FROM TABLE1 INTO TABLE itab1.
DO v_dat+1 TIMES.
LOOP AT itab1 INTO wa_itab1.
wa_itab2-FIELD1 = wa_itab1-FIELD1.
wa_itab2-FIELD2 = wa_itab1-FIELD2.
wa_itab2-FIELD3 = wa_itab1-FIELD3.
wa_itab2-FIELD4 = v_dat. "pass the initialized date
APPEND wa_itab2 TO itab2.
v_dat = v_dat + 1. " increment the date
IF v_dat GT '20080105'.
EXIT.
ENDIF.
ENDLOOP.
ENDDO.
MODIFY TABLE2 FROM TABLE itab2.

Similar Messages

Select max date from a table with multiple records

I need help writing an SQL to select max date from a table with multiple records.
Here's the scenario. There are multiple SA_IDs repeated with various EFFDT (dates). I want to retrieve the most recent effective date so that the SA_ID is unique. Looks simple, but I can't figure this out. Please help.
SA_ID CHAR_TYPE_CD EFFDT CHAR_VAL
0000651005 BASE 15-AUG-07 YES
0000651005 BASE 13-NOV-09 NO
0010973671 BASE 20-MAR-08 YES
0010973671 BASE 18-JUN-10 NO

Hi,
Welcome to the forum!
Whenever you have a question, post a little sample data in a form that people can use to re-create the problem and test their ideas.
For example:
CREATE TABLE     table_x
(     sa_id          NUMBER (10)
,     char_type     VARCHAR2 (10)
,     effdt          DATE
,     char_val     VARCHAR2 (10)
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0000651005, 'BASE',    TO_DATE ('15-AUG-2007', 'DD-MON-YYYY'), 'YES');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0000651005, 'BASE',    TO_DATE ('13-NOV-2009', 'DD-MON-YYYY'), 'NO');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0010973671, 'BASE',    TO_DATE ('20-MAR-2008', 'DD-MON-YYYY'), 'YES');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0010973671, 'BASE',    TO_DATE ('18-JUN-2010', 'DD-MON-YYYY'), 'NO');
COMMIT;Also, post the results that you want from that data. I'm not certain, but I think you want these results:
`    SA_ID LAST_EFFD
    651005 13-NOV-09
10973671 18-JUN-10That is, the latest effdt for each distinct sa_id.
Here's how to get those results:
SELECT    sa_id
,         MAX (effdt)    AS last_effdt
FROM      table_x
GROUP BY sa_id
;

Reg - Reading internal table with multiple record in a single field

Dear Guru's,
i want to read a internal table with field having mutilple entries like
read table READ TABLE LT_T2 INTO LT_T2_WA WITH KEY HKONT IN ( '0001152430', '0001152930', '0001152410' ).
But it says comma without preceding colon (after READ?).
please guide me.....
thanks & Regards,
Balaji.S

ya this is inside the loop.
plz check....
loop at lt_t2 into lt_t2_wa.
READ TABLE LT_T2 INTO LT_T2_WA WITH KEY HKONT IN ( '0001152430', '0001152930', '0001152410' ).
endloop.
thanks & Regards,
Balaji.S

Populating a temp table with multiple records.

I want to populate a temp table with a a set of recs. This table will be used for
crossing/joining with my other tables to pull out data.
ie:
Main table (loc)contains these fields -> county,permit,utme,utmn
Temp table ( tmpid) contains these fields -> countytemp, permittemp
So I will be doing a statement like this once my temp table is populated.
Select l.county,l.permit,l.utme,l.utmn from loc l,tmpid t where l.county=t.countytemp and l.permit=t.permittemp;
So this temp table will basically be a list of ids that can range from a few recs to several hundred.
I want to know is there is way I can poplulate/repopulate it easily using sqlPlus/other by reading in a Ascii file
from client PCs. (besides SQL loader).

HI
let me explain my requirement first,
i need to populate my block with the results from the following sql
SELECT * from contactdet where
(Month=12 and TrType='MTM' and FinYr='04-05' and Userid='SA009' and Clcode='SB001')
UNION
SELECT * from contactdetSUM where (Clcode='SB001' AND CSCODE='AB001')
Pease note. the where clauses i have put are different in each table and my requirement is
the constants values i have put in where clause should be variable (ie. i should be able to put variables like :clcode or so)
I tried us using Query data source type as 'FROM clause query' but it does not allow me to put variables in where clause.
Is there any way out i can do this ? Please help me
Regards
Uday

Joining Three Tables with multiple record

Dear All
we need some help. We have Three Tables in sqlserver2012
Master Table
OrderID PackageID CustomerName
1 1 Abc
2 2 Bcd
3 1 xyz
Child1 Table
OrderID ControlName
1 Row1COlumn1 (It Means Pant in Red Color is selected by user(relation with Child2 Table))
1 Row3Column1 (It Means Gown in Blue Color is selected by user(relation with Child2 Table))
1 Row4Column3 (It Means T Shirt in White Color is selected by user(relation with Child2 Table))
2 Row1Column2 (It Means Tie in Green Color is selected by user(relation with Child2 Table))
2 Row3Column1 (It Means Bow in Red Color is selected by user(relation with Child2 Table))
Child2 Table
PackageID Product Color1 Color2 Color3
1 Pant Red Green Blue
1 Shirt Blue Pink Purple
1 Gown Blue Black Yellow
1 T Shirt Red Green White
2 Tie Red Green White
2 Socks Red Green White
2 Bow Red Green White
We want to have result like
OrderID PackageID CustomerName Pant Gown T Shirt Tie Bow
1 1 ABC Red Blue White x
x
Blue
2 2 Bcd x x x
Green Red
I have tried
;with mycte as (
select ms.OrderID,ms.PackageID
,ms.CustomerName
, Replace(stuff([ControlName], charindex('Column',ControlName),len(ControlName),''),'Row','') rowNum
,Replace(stuff([ControlName], 1, charindex('Column',ControlName)-1 ,''),'Column','') columnNum
From child1 c inner join MasterTable ms on c.Orderid=ms.orderid)
,mycte1 as (
select *, row_number() Over(Partition By PackageID Order By Child2ID) rn from child2
,mycte2 as (
Select m.OrderID,m.PackageID, m.CustomerName, m.ColumnNum, m1.Product
--,m1.Color1 , m1.Color2, m1.Color3
, Case WHEN ColumnNum= 1 Then Color1
WHEN ColumnNum= 1 Then Color1
WHEN ColumnNum= 2 Then Color2
WHEN ColumnNum= 3 Then Color3 End Colors
from mycte m
join mycte1 m1 on m.rowNum=m1.rn and m.PackageID=m1.PackageID)
Select OrderID,PackageID,CustomerName, ISNULL(Max(Case WHen Product='Pant' Then Colors END),'X') as 'Pant'
, ISNULL(Max(Case WHen Product='Gown' Then Colors END),'X') as 'Gown'
, ISNULL(Max(Case WHen Product='T Shirt' Then Colors END),'X') as 'T Shirt'
, ISNULL(Max(Case WHen Product='Tie' Then Colors END),'X') as 'Tie'
, ISNULL(Max(Case WHen Product='Bow' Then Colors END),'X') as 'Bow'
FROM mycte2
Group by OrderID,PackageID, CustomerName
it works if we have a product in one color only. like if we have pant in red and blue then its showing just first record
Thanks and Best Regards Umair

Are you really storing textual values like "Row3Column1" or "Row4Column3"???
Your model is a mess. Redesign it.. btw, these kind of models are quite complex.
USE tempdb;
GO
CREATE TABLE dbo.Colors
ColorID INT NOT NULL ,
ColorName NVARCHAR(255) NOT NULL ,
CONSTRAINT PK_Colors PRIMARY KEY ( ColorID )
CREATE TABLE dbo.Products
ProductID INT NOT NULL ,
ProductName NVARCHAR(255) NOT NULL ,
CONSTRAINT PK_Products PRIMARY KEY ( ProductID ) ,
CONSTRAINT UQ_Products_ProductName UNIQUE ( ProductName )
CREATE TABLE dbo.Packages
PackageID INT NOT NULL ,
CONSTRAINT PK_Packages PRIMARY KEY ( PackageID )
CREATE TABLE dbo.PackageDetails
ColorID INT NOT NULL ,
PackageID INT NOT NULL ,
ProductID INT NOT NULL ,
CONSTRAINT PK_PackageDetails PRIMARY KEY ( ColorID, PackageID, ProductID ) ,
CONSTRAINT FK_PackageDetails_ColorID FOREIGN KEY ( ColorID ) REFERENCES dbo.Colors ( ColorID ) ,
CONSTRAINT FK_PackageDetails_PackageID FOREIGN KEY ( PackageID ) REFERENCES dbo.Packages ( PackageID ) ,
CONSTRAINT FK_PackageDetails_ProductID FOREIGN KEY ( ProductID ) REFERENCES dbo.Products ( ProductID )
CREATE TABLE dbo.Orders
OrderID INT NOT NULL ,
CustomerID INT NOT NULL ,
PackageID INT NOT NULL ,
CONSTRAINT PK_Orders PRIMARY KEY ( OrderID ) ,
CONSTRAINT UQ_Orders_CustomerID UNIQUE ( OrderID, PackageID ) ,
CONSTRAINT FK_Orders_PackageID FOREIGN KEY ( PackageID ) REFERENCES dbo.Packages ( PackageID )
CREATE TABLE dbo.OrderDetails
ColorID INT NOT NULL ,
OrderID INT NOT NULL ,
PackageID INT NOT NULL ,
ProductID INT NOT NULL ,
CONSTRAINT FK_OrderDetails_Orders FOREIGN KEY ( OrderID, PackageID ) REFERENCES dbo.Orders ( OrderID, PackageID ) ,
CONSTRAINT FK_OrderDetails_PackageDetails FOREIGN KEY ( ColorID, PackageID, ProductID ) REFERENCES dbo.PackageDetails ( ColorID, PackageID, ProductID )
GO
INSERT INTO dbo.Colors
( ColorID, ColorName )
VALUES ( 1, 'Red' ),
( 2, 'Green' ),
( 3, 'Blue' ),
( 4, 'Pink' ),
( 5, 'Purple' ),
( 6, 'Black' ),
( 7, 'Yellow' ),
( 8, 'White' );
INSERT INTO dbo.Products
( ProductID, ProductName )
VALUES ( 1, 'Pant' ) ,
( 2, 'Shirt' ) ,
( 3, 'Gown' ) ,
( 4, 'T Shirt' ) ,
( 5, 'Tie' ) ,
( 6, 'Socks' ) ,
( 7, 'Bow' );
INSERT INTO dbo.Packages
( PackageID )
VALUES ( 1 ),
( 2 );
INSERT INTO dbo.PackageDetails
( PackageID, ProductID, ColorID )
VALUES ( 1, 1, 1 ),
( 1, 2, 3 ),
( 1, 3, 3 ),
( 1, 4, 1 ),
( 2, 5, 1 ),
( 2, 6, 1 ),
( 2, 7, 1 ),
( 1, 1, 2 ),
( 1, 2, 4 ),
( 1, 3, 6 ),
( 1, 4, 2 ),
( 2, 5, 2 ),
( 2, 6, 2 ),
( 2, 7, 2 ),
( 1, 1, 3 ),
( 1, 2, 5 ),
( 1, 3, 7 ),
( 1, 4, 8 ),
( 2, 5, 8 ),
( 2, 6, 8 ),
( 2, 7, 8 );
INSERT INTO dbo.Orders
( OrderID, PackageID, CustomerID )
VALUES ( 1, 1, 1 ),
( 2, 2, 2 ),
( 3, 1, 3 );
INSERT INTO dbo.OrderDetails
( ColorID, OrderID, PackageID, ProductID )
VALUES ( 1, 1, 1, 1 ),
( 3, 1, 1, 3 ),
( 8, 1, 1, 4 ),
( 2, 2, 2, 5 ),
( 1, 2, 2, 7 );
GO
SELECT *
FROM dbo.Orders O
INNER JOIN dbo.OrderDetails OD ON OD.OrderID = O.OrderID
INNER JOIN dbo.Products P ON P.ProductID = OD.ProductID
INNER JOIN dbo.Colors C ON C.ColorID = OD.ColorID;
GO
DROP TABLE dbo.OrderDetails;
DROP TABLE dbo.Orders;
DROP TABLE dbo.PackageDetails;
DROP TABLE dbo.Packages;
DROP TABLE dbo.Products;
DROP TABLE dbo.Colors;
GO

Issue in retrieving all the records from ADF Table with multiple row

Hi,
As per my requirement, I need to fill the table with multi selected LOV values and when user clicks on commit, I need to save them to database.
I am using ADF 11g, Multi select table. Using the below ADD method, I am able to add the records but if user clicks on cancel, I need to remove those from view and clear the table as well.
But the Issue I am facing is, in my cancel method, always I am getting half of the records. Lets assume table contains 100 records but in my cancel method, I am getting only 50 records.
Please let me know what is the issue in my source code.
ADD Method:
public void insertRecInCMProcessParamVal(String commType, String processType, Number seqNumber){
try{
Row row = this.getCmProcessParamValueView1().createRow();
row.setAttribute("ParamValue7", commType);
row.setAttribute("ProcessType", processType);
row.setAttribute("CreationDate", new Date());
row.setAttribute("CreatedBy", uid);
row.setAttribute("ParamValueSeqNum", seqNumber);
row.setAttribute("ProcessedFlag", "N");
this.getCmProcessParamValueView1().insertRow(row);
}catch(Exception e){
e.printStackTrace();
Table Code:
<af:table value="#{bindings.CmProcessParamValueView11.collectionModel}"
var="row"
rows="#{bindings.CmProcessParamValueView11.rangeSize}"
emptyText="#{bindings.CmProcessParamValueView11.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CmProcessParamValueView11.rangeSize}"
rowBandingInterval="1"
selectedRowKeys="#{bindings.CmProcessParamValueView11.collectionModel.selectedRow}"
selectionListener="#{bindings.CmProcessParamValueView11.collectionModel.makeCurrent}"
rowSelection="multiple"
binding="#{backingBeanScope.backing_app_RunCalcPage.t1}"
id="t1" width="100%" inlineStyle="height:100px;" >
<af:column sortProperty="ParamValue6"
sortable="true"
headerText="#{bindings.CmProcessParamValueView11.hints.ParamValue6.label}"
id="c1" visible="false">
<af:inputText value="#{row.bindings.ParamValue6.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue6.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue6.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue6.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue6.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue6.tooltip}"
id="it3">
<f:validator binding="#{row.bindings.ParamValue6.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="ParamValue7"
sortable="true"
headerText="Comm Type"
id="c2">
<af:inputText value="#{row.bindings.ParamValue7.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue7.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue7.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue7.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue7.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue7.tooltip}"
id="it4">
<f:validator binding="#{row.bindings.ParamValue7.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="ParamValue8"
sortable="true"
headerText="#{bindings.CmProcessParamValueView11.hints.ParamValue8.label}"
id="c3" visible="false">
<af:inputText value="#{row.bindings.ParamValue8.inputValue}"
label="#{bindings.CmProcessParamValueView11.hints.ParamValue8.label}"
required="#{bindings.CmProcessParamValueView11.hints.ParamValue8.mandatory}"
columns="#{bindings.CmProcessParamValueView11.hints.ParamValue8.displayWidth}"
maximumLength="#{bindings.CmProcessParamValueView11.hints.ParamValue8.precision}"
shortDesc="#{bindings.CmProcessParamValueView11.hints.ParamValue8.tooltip}"
id="it2">
<f:validator binding="#{row.bindings.ParamValue8.validator}"/>
</af:inputText>
</af:column>
</af:table>
Backing Bean Code:
DCBindingContainer dcBindings=(DCBindingContainer)getBindings();
DCIteratorBinding dcIterator=dcBindings.findIteratorBinding("CmProcessParamValueView1Iterator");
RowSetIterator rs = dcIterator.getRowSetIterator();
System.out.println("In Cancel Row Count is : "+ rs.getRowCount());
if (rs.getRowCount() > 0) {
Row row = rs.first();
row.refresh(Row.REFRESH_UNDO_CHANGES);
row.remove();
while (rs.hasNext()) {
int count = rs.getRowCount();
System.out.println("Count is : "+ count);
Row row = rs.next();
System.out.println("Row === "+ row);
if(row != null){
row.refresh(Row.REFRESH_UNDO_CHANGES);
row.remove();
Thanks.

Issue resolved.
remove selectionListener and selectedRowKeys....
code to get all the selectedRows.
RowSetIterator rs = dcIterator.getRowSetIterator();
RowKeySet rks = this.t1.getSelectedRowKeys();
Iterator rksIter = rks.iterator();
while (rksIter.hasNext()) {
List l = (List) rksIter.next();
Key key = (Key)l.get(0);
Row row = rs.getRow(key);
Thanks.

I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
Thanks!

That is a quirk of Pagesthat it applies only one record per page.
There is a way around this:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
Peter

Problem with Multiple record creation using BAPI BAPI_PRICES_CONDITION

Hi,
I am working on IS Media Sales And Distribution wherein i am using BAPI BAPI_PRICES_CONDITION for condition record creation in TCODE JC9B. I am able to create one record using this BAPI for one sales promotion but having problem while creation of multiple records for the same sales promotion wherein my internal table have multiple records. It gives me error that data in BAPICONDIT is missing.
I am aatching followig code for reference
BAPI have field of varkey which i am filling as combination of sales org. + distn channel + sales promotion + delivery type
In this varkey delivery type is changing for sales promotion Can be said that one sales promotion can have multiple delivery type .
Am i giving the correct varkey for each itration of internal table ?
I am attaching code for reference.
Here loop it_cond contain one promotion and multiple delivery type.
sales org   distn ch promotion     delivery
0100             01        zsalesprom   03
0100             01        zsalesprom   z3
LOOP AT it_cond INTO wa_cond.
Get next condition number
      CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          nr_range_nr                   = '01'
          object                        = 'KONH'
QUANTITY                      = '1'
SUBOBJECT                     = ' '
TOYEAR                        = '0000'
IGNORE_BUFFER                 = ' '
       IMPORTING
          number                        = number
QUANTITY                      =
RETURNCODE                    =
EXCEPTIONS
INTERVAL_NOT_FOUND            = 1
NUMBER_RANGE_NOT_INTERN       = 2
OBJECT_NOT_FOUND              = 3
QUANTITY_IS_0                 = 4
QUANTITY_IS_NOT_1             = 5
INTERVAL_OVERFLOW             = 6
BUFFER_OVERFLOW               = 7
OTHERS                        = 8
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
Here i am concacating varkey for each new delivery
CLEAR : l_min,l_length,l_var.
CONCATENATE wa_cond-vkorg wa_cond-vtweg wa_cond-wrbakt INTO l_var.
l_length = STRLEN( l_var ).
IF l_var+14(2) IS INITIAL.
WRITE wa_cond-lifart TO L_VAR+14.
l_length = STRLEN( l_var ).
ENDIF.
W_LINE = W_LINE + 1.
*First table in BAPI
        wa_bapicondct-operation = '009'.
        wa_bapicondct-cond_usage = 'A'.
        wa_bapicondct-table_no = '506'.
        wa_bapicondct-applicatio = 'J0'.
        wa_bapicondct-cond_type = 'RATE'.
        wa_bapicondct-varkey = l_var.
        wa_bapicondct-valid_to = wa_cond-datbi.
        wa_bapicondct-valid_from = wa_cond-datab.
        wa_bapicondct-cond_no = number. "
        APPEND wa_bapicondct TO it_bapicondct.
*Second table in BAPI
        wa_bapicondhd-operation = '009'.
        wa_bapicondhd-cond_no = number.
        wa_bapicondhd-cond_usage = 'A'.
        wa_bapicondhd-table_no = '506'.
       wa_bapicondhd-created_by = sy-uname.
       wa_bapicondhd-creat_date = sy-datum.
        wa_bapicondhd-applicatio = 'J0'.
        wa_bapicondhd-cond_type = 'RATE'.
        wa_bapicondhd-varkey = l_var.
        wa_bapicondhd-valid_from = wa_cond-datab.
        wa_bapicondhd-valid_to = wa_cond-datbi.
        APPEND wa_bapicondhd TO it_bapicondhd.
*Third table in BAPI
        wa_bapicondit-operation = '009'.
        wa_bapicondit-cond_no = number.
        wa_bapicondit-cond_count = wa_cond-cond_count.
        wa_bapicondit-applicatio = 'J0'.
        wa_bapicondit-cond_type = 'RATE'.
        wa_bapicondit-calctypcon = 'C'.
       wa_bapicondit-scaletype = 'A'.
        wa_bapicondit-cond_value = wa_cond-kbetr.
        wa_bapicondit-condcurr = wa_cond-konwa.
        wa_bapicondit-promotion = wa_cond-wrbakt.
        APPEND wa_bapicondit TO it_bapicondit.
*Fourth table in BAPI
        wa_bapicondqs-operation = '009'.
        wa_bapicondqs-cond_no = number.
        wa_bapicondqs-cond_count = wa_cond-cond_count.
        wa_bapicondqs-currency = wa_cond-kbetr.
        wa_bapicondqs-condcurr = wa_cond-konwa.
       wa_bapicondqs-cond_unit = 'EA'.
        wa_bapicondqs-LINE_NO = W_LINE."'0001'.
        APPEND wa_bapicondqs TO it_bapicondqs.
*Fifth table in BAPI
        wa_bapicondvs-operation = '009'.
        wa_bapicondvs-cond_no = number.
        wa_bapicondvs-cond_count = wa_cond-cond_count.
        wa_bapicondvs-currenckey = wa_cond-konwa.
        wa_bapicondvs-currenciso = wa_cond-konwa.
       wa_bapicondvs-currency = wa_cond-kbetr.
       wa_bapicondvs-condcurr = wa_cond-konwa.
       wa_bapicondvs-curren_iso = wa_cond-konwa.
       wa_bapicondvs-LINE_NO = W_LINE."'0001'.
        APPEND wa_bapicondvs TO it_bapicondvs.
        CALL FUNCTION 'BAPI_PRICES_CONDITIONS'
EXPORTING
PI_INITIALMODE       = ' '
PI_BLOCKNUMBER       =
          TABLES
            ti_bapicondct        = it_bapicondct
            ti_bapicondhd        = it_bapicondhd
            ti_bapicondit        = it_bapicondit
            ti_bapicondqs        = it_bapicondqs
            ti_bapicondvs        = it_bapicondvs
            to_bapiret2          = it_bapiret2
            to_bapiknumhs        = it_bapiknumhs
            to_mem_initial       = it_cnd_mem_initial
         EXCEPTIONS
           update_error         = 1
           OTHERS               = 2
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           wait          = 'X'
IMPORTING
RETURN        =
        CLEAR : wa_bapicondct,wa_bapicondhd,wa_bapicondvs,wa_bapicondqs.
        CLEAR : wa_bapicondit.
      ENDLOOP.
    ENDIF.
ENDIF.
Kindly Suggest.
Thanks
Parag

Solved By myself
There is problem while passing data to internal table for item level

How to fill internal table with no data in debugging mode

Hi all,
I modified one existing program.Now I want to test it.I am not given test data.So in the middle of my debugging, I found that one internal table with no data.My problem is how to fill that internal table with few records in that debugging mode just as we change contents in debugging mode.If I want to proceed further means that internal table must have some records.
Please I dont know how to create test data so I am trying to create values temporarily in debugging mode only.
Thanks,
Balaji

Hi,
In the debugging do the following..
Click the Table button..
Double click on the internal table name..
Then in the bottom of the screen you will get the buttons like CHANGE, INSERT, APPEND, DELETE..
Use the APPEND button to insert records to the internal table..
Thanks,
Naren

How to isolate error with a record/segment in IDOC with multiple records

I have an IDOC with multiple records/segments (typically 1000 records/segments). Sometime XI can not process the IDOC because of some control characters in data.
1. How can I pre-processed the IDOC to remove those control characters?
Can I use XPATH expression/Java class to do it? How can I configure the XPATH expression/Java class in XI to pre-process the file?
2. Until I have answer to 1st question. I would like to find out the error is exactly for which record? What configuration can I do in XI to isolate the error is with which record/segment in IDOC?
Thanks in advance.

Split the IDoc.
with in the UDF, after the validations if every thing fine, pass as successful records to success_MT and pass it to target system using Branching in BPM.
if errors found in the record, then store the error records in Hash table with in UDF, get the IDoc number, frame as a string and raise alert.
U have to do this in the context of IDoc.
If U wanna get the IDoc Number, Segment Name and field name for every failure, U can pass the expected error field name as constant to UDF, frame the sentence in the UDF like -> <b>IDoc 1234321 segment SEG001 field FLD03 has a special character *</b>.
If U wanna pass this string to source/target, U can do in error messages branch in BPM.
U must use BPM for splitting the IDoc, since it is multi-mapping.
reg.,
Yallabandi.

Fill internal table with mutliple entries for nested structure

Dear ABAP Experts,
I have a question related to fill internal tables with nested structures.
I have a structure like this:
BEGIN OF proto,
          sicht TYPE ysicht,
          version TYPE FAGLFLEXA-RVERS,
          BEGIN OF kons,
kon TYPE YKONSEINHEIT,
          END OF kons,
          jahr TYPE CHAR04,
END OF proto.
Now I need to fill this structure with values (over an internal table), but how can I achieve that I save multiple datas für element "kon" für one single entry of structure "proto"?
An example could be:
sicht = '01'
version = '100'
kon = 1001 (first entry)
kon = 1002 (second entry)
usw... (n entry)
jahr = '2008'
Thanks in advance for every helpful answer.
Regards
Thomas

BEGIN OF proto,
           sicht TYPE ysicht,
           version TYPE FAGLFLEXA-RVERS,
           kons TYPE STANDARD TABLE OF YKONSEINHEIT WITH NON-UNIQUE KEY TABLE_LINE,
           jahr TYPE CHAR04,
END OF proto.
DATA: ls_proto TYPE proto,
      lt_proto TYPE STANDARD TABLE OF proto,
      ls_kon
ls_proto-sicht = '01'.
ls_proto-version = '100'
INSERT '1001' INTO TABLE ls_proto-kons.
INSERT '1002' INTO TABLE ls_proto-kons.
ls_proto-jahr = '2008'.
INSERT ls_proto INTO TABLE lt_proto
If you're going to use a more complicated inner table with several components, then you need to define a type for those components.
matt

Can we bind a single external table with multiple files in OWB 11g?

Hi,
I wanted to ask if it is possible to bind an external table with multiple source files at same or different locations? Or an external table has to be bound to a single source file and a single location.
Thanks in advance,
Ann.
Edited by: Ann on Oct 8, 2010 9:38 AM

Hi Ann,
Can you please help me out by telling me the steps to accomplish this. Right click on the external table in project tree, from the menu choose Configure,
then in opened Configuration Properties dialog window right clock on Data Files node and choose from menu Create -
you will get new record for file - specify Data File Name property
Also link from OWB user guide
http://download.oracle.com/docs/cd/B28359_01/owb.111/b31278/ref_def_flatfiles.htm#i1126304
Regards,
Oleg

Flat File with multiple record types (OWB 10.2.0.2)

Hi!
I`m using OWB 10.2.0.2 and I`m trying to load a flat file with multiple record types, using SQL LOADER.
In the flat file editor in the Record tab, I`ve set the type values and the corresponding record names like this:
Type Value Record Name
======== ===========
T TRAILER
0 DETAILS
1 DETAILS
2 DETAILS
When using this flat file in a mapping to load the data in a staging table, the generated code looks like this:
INTO TABLE TRAILER
TRUNCATE
REENABLE DISABLED_CONSTRAINTS
WHEN (1:1) = 'T'
INTO TABLE DETAILS
APPEND
REENABLE DISABLED_CONSTRAINTS
WHEN (1:1) = '0,1,2'
The above clause (WHEN (1:1) = '0,1,2') is wrong as I expect one "INTO TABLE..." clause for each record type.
Could this be a bug or am I doing something wrong?
Thanks a lot for your help,
Yorgos

We`re using two target tables, one for the trailer record and the other for the details records.
We are facing this problem from the moment we upgraded from OWB 10.1 to OWB 10.2.0.2, so we think it must be something with the way the sql loader code is generated in the new version.
As our data sources are mainly flat files coming from mainframes, this is a huge problem for us. We even asked an expert in DW from Oracle to help us on this, but still haven`t found a solution.
Is there any workaround for this or should we forget sql loader and go with an external tables + custom PL/SQL code solution?
Your help is greatly appreciated Jean-Pierre.
Regards,
Yorgos

Editable table with multiple rows

Hi All!
We're trying to develop some application in VC 7.0. That application should read data from some R/3 tables (via standard and custom functional modules), then display data to user and allow him/her to modify it (or add some data into table rows), and then save it back to R/3.
What is the best way to do that?
There's no problem with displaying data.
But when I try to add something to table (on portal interface), I'm able to use only first row of the table... Even if I fill all fields of that row, I'm not able to add data to second row, etc.
Second question. Is it possible to display in one table contents of output of several BAPIs? For example we have three bapis, one displaying user, second displays that user's subordinates, and the third one - that user's manager. And we want one resulting table...
And last. What is the best way to submit data from table view in VC (portal) to R/3 table? I understand that we should write some functional module, that puts data to R/3. I'm asking about what should be done in VC itself. Some button, or action...
Any help will be appreciated and rewarded :o)
Regards,
DK

Here are some former postings:
Editable table with multiple rows
and
Editable table with multiple rows
Are you on the right SP-level?
Can you also split up your posting: one question, one posting? This way you get faster answers, as people might just browse the headers.

How can I convert string to the record store with multiple records in it?

Hi Everyone,
How can I convert the string to the record store, with multiple records? I mean I have a string like as below:
"SecA: [Y,Y,Y,N][good,good,bad,bad] SecB: [Y,Y,N][good,good,cant say] SecC: [Y,N][true,false]"
now I want to create a record store with three records in it for each i.e. SecA, SecB, SecC. So that I can retrieve them easily using enumerateRecord.
Please guide me and give me some links or suggestions to achieve the above thing.
Best Regards

Hi,
I'd not use multiple records for this case. Managing more records needs more and redundant effort.
Just use single record. Create ByteArrayOutputStream->DataOutputStream and put multiple strings via writeUTF() (plus any other data like number of records at the beginning...), then save the byte array to the record...
It's easier, it's faster (runtime), it's better manageable...
Rada

Fill a table with multiple records

Similar Messages

Maybe you are looking for