Filter function for measures

Hi All,
Is there any way to use Filter function for measures also because we have compare dates along with measures as below
FILTER("1. Fact - Order"."Order Amt" USING (("Invoice (with fact 3)"."Promise Date (with fact 1 & 3)" < @{date1}{date '2013-04-08'}) AND (("Order Lines"."Ship Date (with fact 1)" > @{date1}{date '2013-04-08'}) OR ("Order Lines"."Ship Date (with fact 1)" = date '1901-01-01'))))
here we have to compare like measure1< measure2 then Order Amt.

You can use CASE WHEN as Saichand said, the syntax would be like this,
Case when <compare your measures> then FILTER("1. Fact - Order"."Order Amt" USING (("Invoice (with fact 3)"."Promise Date (with fact 1 & 3)" < @{date1}{date '2013-04-08'}) AND (("Order Lines"."Ship Date (with fact 1)" > @{date1}{date '2013-04-08'}) OR ("Order Lines"."Ship Date (with fact 1)" = date '1901-01-01')))) end
Mark points if it helps :)

Similar Messages

"Control + F5" standard filter functionality for ALV Grids

Hi all,
After an ALV Grid is displayed on screen there is a standard functionality to filter a selected column.
You can select a column (click on the head) of the ALV, then "Control + F5" and a pop-up appears to insert a value or a range by which the filtration is going to be done.
But a I have problem with a concrete field. It doesn`t seem different on comparison with other fields (CHAR30), but I don`t know why it doesn`t work correctly as others.
Have you had any situation like this ??
Thanks & sorry for my bad english,
Rubè

Hi Frank,
When you are entering 89012 and pressing enter the additional zeros are adding up because of the data type of VBELN We have standard conversion routine attached with this .So when ever u wrtie any text that routine will works.
Can you please check what data type are you using in the internal table that you are binding to the node?
Thanks and Regards,
NSingh
Edited by: Nsingh on Feb 17, 2012 4:52 AM

Filter Function for Contacts.app

Apple Contacts.app needs to be able to filter contacts with more flexible criteria.
I have maybe hundreds of useless contacts synced from Gmail. Neither Apple Contacts nor Google Contacts offers an ability to filter contacts with following criteria:
- have phone number but no email
- have email but no phone number
- have name but neither phone number nor email
- don't have name but both name and phone number
These filters seems impossible to achieve through the existing keyword search. (Maybe with "@" ?) and these would help organize my contacts dramatically more efficiently. For example:
- I would delete all contacts without either an email nor a phone number
- I would categorize all contacts without phone numbers into a group
- I would name all contacts with both name and phone number
Therefore, this improvement would be very useful.

> This is a continuation of a previous issue I've been working on. This
> falls into the realm of filters, so I thought I'd move it here.
The same sysops cover all the BM forums, therefore it doesn't matter.
> I have a
> java app that needs to connect to the internet. It works fine when I
> unload ipflt. Using filter debug, it seems as if packets are going out
> correctly, but are being dropped coming back. I thought, that with dynamic
> NAT, I wouldn't have to create an inbound exception. Am I off base with that?
Is the exception you made STATEFUL? If it's not stateful the return
packets will be dropped.
Cat
NSC Volunteer Sysop

Filter Function problems on ALV report. [Resolved]

Hi,
I developed an ALV report by using function as below:
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
         EXPORTING
              I_CALLBACK_PROGRAM = G_REPID
*            I_CALLBACK_PF_STATUS_SET = status_set
*            I_CALLBACK_USER_COMMAND = USER_COMMAND
              I_STRUCTURE_NAME = 'T_BSIK'
              IS_LAYOUT        = GS_LAYOUT
              IT_FIELDCAT      = GT_FIELDCAT[]
         TABLES
              T_OUTTAB    = TAB_BSIK.
And this ALV custom report is referenced from standard function FBL5N.
After i completed this report, i made an comparision of FBL5N and my custom report.
When I apply the filter function, for example, on the document type, I cannot input 2 characters in the document type field under the filter function. The field length is only 1 character. Similar case results on the field document date.
While the standard function FBL5N works very nice.
What should i do to make the filter function of my own ALV report as the same as the standard function FBL5N do?
Thanks in advance.
Lala
Message was edited by:
        Hoo lala

Oh, i found where the problem is...
add below 2 statements, then the question is resolved.
LS_FIELDCAT-ref_fieldname = ****
LS_FIELDCAT-ref_tabname = ***
FORM FIELDCAT_INIT tables RT_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-COL_POS   = 3.
LS_FIELDCAT-FIELDNAME = 'BLART'.
LS_FIELDCAT-TABNAME   = 'TAB_BSIK'.
LS_FIELDCAT-SELTEXT_L = 'Document Type'.
LS_FIELDCAT-ref_fieldname = 'BLART'.
LS_FIELDCAT-ref_tabname = 'BSIK'.
APPEND LS_FIELDCAT TO RT_FIELDCAT.
endform.
Fine now.
Lala

Class to Generate Dynamic Filter Function

I have built an ActionScript Class to allow me to create a
dynamic Filter Function for the several ArrayCollections I use in
my Flex Application. It works just as I intended, however, I'm
wondering if it's too verbose, and can be skimmed down to use less
code. For example, is there some way I could extend the Function
class? See a snippet of my Class attached.

I have built an ActionScript Class to allow me to create a
dynamic Filter Function for the several ArrayCollections I use in
my Flex Application. It works just as I intended, however, I'm
wondering if it's too verbose, and can be skimmed down to use less
code. For example, is there some way I could extend the Function
class? See a snippet of my Class attached.

Question about the Filter type for the trace provide "Microsoft-Windows-Kernel-File"

Hello all,
I have moved this question from the Windows
Server General Forum accorfing to the suggestion from Mr. Justin Gu
I have a question about the Filter function for the trace provider "Microsoft-Windows-Kernel-File".
I can find the Filter function with the following operation.
Mr. Justin Gu wrote:
> You create a Data Collector Set for the trace provider "Microsoft-Windows-Kernel-File" and finish completely, then you > can right click it and select Properties.
In the Properties dialog box, click Filter and
then select ‘Edit…’. You will be> able
to see the Filter type and Filter data in the Filter dialog box.
What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.

What
Kind of Filter can
I use in this Filter dialog box?
And, how can I set to exclude the some kind of datas?
Could you give me your suggestion?
Thank you.
I'm looking for the same information.

Can't find FILTER CONDITION for filters or Function_Name for Functions

In the Data Warehouse 11gr1 views all_iv_xform...
I can't seem to find the Filter Conditions for filters and function name for functions that are called.
I have looked at the other views in the documentation for the API's but can't seem to find this information.
Any body have any ideas where this information is?
thanks
greG

select map_component_id, position, source_parameter_name
from ALL_IV_XFORM_MAP_PARAMETERS
where map_component_id in (
SELECT map_component_id
FROM ALL_IV_XFORM_MAP_COMPONENTS
WHERE MAP_ID IN (
select MAP_ID
from ALL_IV_XFORM_MAPS
where MAP_NAME = :p_map_name
AND OPERATOR_TYPE = 'Filter'
Using map_component_id and position from above query you can see your filter condition defined in property_value:
select map_component_name, property_name, property_value
from ALL_IV_XFORM_MAP_PROPERTIES
where map_component_id = :p_comp_id;

There is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter in there low cost mobile

there is no filter function in numbers for ipad,its very discouraging,as a ipad fan,even nokia lumia providing filter function in excel in there low cost mobile.
APPLE KINDLY PROVIDE THIS FEATURE AS UPDATE SOON,COZ I WORK ON EXCEL N NUMBERS IN MY IPAD IS DEAD WITH OUT FILTER FUNCTION,I CAN NOT TRAVEL WITH MY IPAD DUE TO THIS REASON,AS I HAVE TO BE IN FIELD WITH SALES FORCE SO I BOUGHT IPAD.

Probably you know that the new version of Numbers for iOS uses the filters created in the Numbers for Mac version.
It's not the best solution but it helps (of course, if you have a Mac!)

Problem with ALV filter functionality when filtered for multiple values

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Does Photoshop Touch for Android Tablet incorporate a polarizer filter function?

As the title implies: does the Photoshop Touch for Android have a polarizer filter function?

No, Photoshop Touch does not offer a polarizer filter function.
However you may just search the internet for "photoshop polarizer filter"

Filter Function in Column Formula is not working properly

Hi,
I am using Filter Function in Column formula tab in Answers to calculate the Total sum from the start of the Fiscal month to the Month selected from the Prompt.
My requirement is I have total sales column. Now I need to calculate TYYTD kind of thing for which I cant use the Time sereis due to my report constraint.
Instead of that I am using this Filter function on TYYTD column where i am giving the filter as start of the Fiscal month to the month selected from the Prompt.
For example if I select May month from the Prompt then this TYYTD column should give me SUM(Total Sales) between Feb and May for which I am using the Filter Function. But it giving me only May sales whcih is same as Total Sales column.
Can anyone throw some light on this as this is very important for us or any alternate solution other than Time sereis measures.
Did anyone got this kind of issue with Filter Function?
Regards,
Azad

Ok...here's the steps to fix this as efficiently as possible. I have a whole bunch of mailboxes under "On My Mac" and they have a bunch of mailboxes nested in them. I get my messages into Apple Mail via IMAP. (I don't know if this matters.) The steps below assume you have a similar setup.
1. Hold the Option key down and click the dropdown arrow next to each mailbox that has one. This will cause all nested mailboxes below it to appear.
2. Go to the top of the list of mailboxes under "On My Mac" and highlight the first mailbox. Then hold the Shift key down and highlight the last mailbox in the list. This will cause all of the mailboxes and nested mailboxes to be highlighted.
3. From the menu, select "Mailbox --> Rebuild" and the rebuild process will start.
4. Watch the top of the mail screen to see the message count change as the mailboxes are being rebuilt. Wait until the activity stops before doing the next step.
5. As the mailboxes were rebuilt, many messages were reset as "Unread" even though every message was previously "Read." Make sure the mailboxes you want to affect are still highlighted. Right-click and select "Mark All Messages Read."
That fixed the problem for me.

Using FILTER function in oracle answers

Gurus,
I have a question related to using Filter function in oracle answers.
When trying to insert a Filter (expr) Using (expr) clause in the formula area of a fact table field, It errored out with msg saying about using a wrong measure.
I know this can be done with a case expression but I tried filter clause since this is available in oracle answers.
Please help me figuring out this scenario.
Thanks.

David / Raghu - Thanks for u'r replies and apologizes for not posting question with proper material.
Am posting my code and the error message from the screen.
Code :
IFNULL(FILTER("Fact - MBS Loan Transactions"."OUTSTANDING PRINCIPAL" USING "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK" = 'HDC'),0)
Error :
nQSError: 10058] A general error has occurred. [nQSError: 22032] Function FILTER requires at least one measure attribute in its first argument. (HY000)
SQL Issued: SELECT "Dim - MBS Loan"."LOAN AMOUNT", "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK", "Dim - MBS Loan"."LOAN TYPE SEN/SUB", "Dim - MBS Project"."PROJECT NAME", "Dim - MBS Project"."PROJECT NUMBER", "Fact - MBS Loan Transactions"."AR BALANCE INTEREST", "Fact - MBS Loan Transactions"."GL BALANCE INTEREST", IFNULL(FILTER("Fact - MBS Loan Transactions"."OUTSTANDING PRINCIPAL" USING "Dim - MBS Loan"."LOAN TYPE HPD/HDC/BNK" = 'HDC'),0) FROM "Financials - MBS"
OK (Ignore Error)
Please continue answering my queries. Since am a newbie your answers won't be just a reply but it's actually learning for me.
Thanks.

Missing the filter function in the new version of Spotify? Come over here.

Hi folks,
Many of you have requested we re-add an option to filter from artist, album and playlist pages in Spotify. We're considering this feature for newer versions of the application but we're investigating the best solution. Therefore, we have a question which will help us make this feature even better than before:
What did you mainly use the filter function in Spotify for?
Please reply to this thread with your answer.

@Spotify What sort of kind of question is this? Are you implying that no one at Spotify has a basic understanding of usability? It sure seems like it. First, I have to ask why would Spotify ever remove a feature that is in active use? Second, why do the product managers/developers at Spotify not understand the existing use of "find" or "filter"? The reason this feature was put into the product is the reason it should stay in the product. This sort of functionality has existed in computer interfaces for decades. Visual search (i.e. having a human being visually scan every item manually) is very slow and prone to error. When there is more than a little information on the screen, having the computer search for the human is much more efficient and less prone to error. I would suggest everyone at Spotify get as much remedial education as possible in usability. Here's a place to start: What — Definition of UsabilityUsability is a quality attribute that assesses how easy user interfaces are to use. The word "usability" also refers to methods for improving ease-of-use during the design process.Usability is defined by 5 quality components:Learnability: How easy is it for users to accomplish basic tasks the first time they encounter the design?Efficiency: Once users have learned the design, how quickly can they perform tasks?Memorability: When users return to the design after a period of not using it, how easily can they reestablish proficiency?Errors: How many errors do users make, how severe are these errors, and how easily can they recover from the errors?Satisfaction: How pleasant is it to use the design?There are many other important quality attributes. A key one is utility, which refers to the design's functionality: Does it do what users need?Usability and utility are equally important and together determine whether something is useful: It matters little that something is easy if it's not what you want. It's also no good if the system can hypothetically do what you want, but you can't make it happen because the user interface is too difficult. To study a design's utility, you can use the same user research methods that improve usability.Definition: Utility = whether it provides the features you need.Definition: Usability = how easy & pleasant these features are to use.Definition: Useful = usability + utility.Even using these basic principles, it is easy to see the reasons that Ctrl/Cmd-F should be put back into the product. Measure how long it takes users to find music on a long playlist or long search results page without Ctrl/Cmd-F. And then measure with it. The only failures with the original design of find/filter were (a) that it was less discoverable than it should be in the GUI, i.e. no GUI icon cue and (b) it didn't filter/find using substrings very well or at all. It pains me be a customer of a company where the original wisdom of the people who built the UI of the v0.8.5 client (and previous versions) has apparently been flushed down the drain.

DAX query to calculate distinct count respect to a column after a Filter function - SSAS 2012 Tabular

Hi,
I'm trying to build the dax query to determine the distinct count for a column returned by the application of a Filter function.
evaluate(
row("counter",
countrows(
filter(order_summary,
year(order_summary[change_date]) = 2013) )
I need to count the distinct values for an id returned by the Filter function.
Any helps, please? Thanks

Hi pscorca,
According to your description, you want to calculate the distinct values for records where change_date is 2013. Right?
In this scenario, we can use the DISTINCT() function within COUNTROWS(). Please try the expression below:
=calculate(
countrows(distinct(order_summary[column])),
Filter('order_summary', year(order_summary[change_date])=2013)
Reference:
Distinct Count Measure in PowerPivot using DAX
Related Distinct Count
Best Regards,
Simon Hou
TechNet Community Support

How can i extend the filter function to also include an option to select which column to filter on?

Hi.
I have built an spry test-page (testing it on my localhost so i cannot give you direct access to it) here i have an XML file that i show in an dynamic/ repeat table with 5 columns.
I hvae included an spry filter function to easy filter out records, but the code only allows me to filter on one of the columns.
I would like to add an extra "select-menu" to define which column the filter should be active for, how can i do that
Here is the filter code and also the html code for the select-menu and the box to type in what to filter.
The bold parts is the important parts, i would like the options values from the select menu to be inserted in the filterData function to be able to define which column to do the filtering on.
var ds1 = new Spry.Data.XMLDataSet("report3.xml", "orders/order", {sortOnLoad: "@id", sortOrderOnLoad: "descending"});
ds1.setColumnType("date", "date");
ds1.setColumnType("BUTIKNR", "number");
ds1.setColumnType("EXTRAFRAKT", "number");
ds1.setColumnType("job/@idx", "number");
var jobs = new Spry.Data.NestedXMLDataSet(ds1, "job");
function FilterData()
    var tf = document.getElementById("filterTF");
    var menu = document.getElementById("searchIdent");
    if (!tf.value)
        // If the text field is empty, remove any filter
        // that is set on the data set.
        ds1.filter(null);
        return;
    // Set a filter on the data set that matches any row
    // that begins with the string in the text field.
    var regExpStr = tf.value;
    if (!document.getElementById("containsCB").checked)
        regExpStr = "^" + regExpStr;
    var regExp = new RegExp(regExpStr, "i");
    var filterFunc = function(ds, row, rowNumber)
        var str = row["@id"];
        if (str && str.search(regExp) != -1)
            return row;
        return null;
    ds1.filter(filterFunc);
function StartFilterTimer()
    if (StartFilterTimer.timerID)
        clearTimeout(StartFilterTimer.timerID);
    StartFilterTimer.timerID = setTimeout(function() { StartFilterTimer.timerID = null; FilterData(); }, 100);
html:
            <select name="searchIdent" size="1" id="searchIdent">
                <option value="@id" selected="selected">ID</option>
                <option value="date">DATUM</option>
                <option value="time">TID</option>
                <option value="BUTIKNR">BUTIK</option>
                <option value="REF">REFERENS</option>
              </select>
          <input type="text" id="filterTF" onkeyup="StartFilterTimer();" />
Contains:
<input type="checkbox" id="containsCB" /></td>
Thanks in advance.
//Rickard H

Now it works, i had to do it like this:
    var filterFunc = function(ds, row, rowNumber)
        var str = row["@id"];
        if (str && str.search(regExp) != -1)
            return row;
        var str1 = row["date"];
        if (str1 && str1.search(regExp) != -1)
            return row;
        var str2 = row["time"];
        if (str2 && str2.search(regExp) != -1)
            return row;
        var str3 = row["BUTIKNR"];
        if (str3 && str3.search(regExp) != -1)
            return row;
        var str4 = row["REF"];
        if (str4 && str4.search(regExp) != -1)
            return row;
        return null;
I also had to remove the line "ds1.setColumnType("BUTIKNR", "number");" from the code, otherwise it would not search at all (only searches string types?).

Filter function for measures

Similar Messages

Maybe you are looking for