Filter Manager failed to attach to volume...

Filter Manager failed to attach to volume '\Device\HarddiskVolume52'.  This volume will be unavailable for filtering until a reboot.  The final status was 0xC03A001C.
System is Windows 8.0 Pro 64-bit. Error seems to occur daily, around the time of a backup operation. Backup errors regard failure to backup Skydrive directory. From other threads, it seems this error involves VM disks. Since I am not running VM on this machine,
that would be most disconcerting if the error does not involve Skydrive (onedrive). The number of errors matches the number of directories skipped.
All users on machine show Onedrive folders in Explorer. Could the Skydrive folders be remnants somewhere, perhaps the registry, that can be removed.
Thanks,
   John

Hi,
Please see information in this link:
http://www.mcbsys.com/techblog/2012/12/filtermanager-event-id-3-during-backups/
According to the guide above, we can view the Details of the event log, find its process ID (PID), then find the realted process\service with the PID which causes this issue, you can use Task Manager, it will be mostly cause by Windows Search service.
You can also find some explanation in the following link:
http://translate.google.com/translate?sl=ja&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&eotf=1&u=http%3A%2F%2Fblogs.technet.com%2Fb%2Faskcorejp%2Farchive%2F2011%2F07%2F07%2Fsystem-microsoft-windows-filtermanager-3.aspx&act=url
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Similar Messages

  • Attach CSV volumes from filter driver during system startup

    Hi,
    We have written a filter driver to track Hyper-V CSV volumes in order to track the modifications in those volumes for backup purpose. When the Hyper-V host is running, we are able to attach the CSV volumes from the driver without any issues. But during Hyper-V
    host startup, our driver failed to attach the csv volumes.
    We suspect that filter driver failed to attach CSV volume, since Cluster service was not started at that point of time during the system start up. If we attach the CSV volume later, it works. However, for the continuos tracking we want our driver
    to track the modifications from the system startup itself. I believe, we need to load the filter driver once after the csv service is started.  
    Configurations of filter driver are as following(inf file).
    DisplayName      = %ServiceName%
    Description      = %ServiceDescription%
    ServiceBinary    = %12%\%DriverName%.sys        ;%windir%\system32\drivers\
    Dependencies     = FltMgr
    ServiceType      = 2                            ;SERVICE_FILE_SYSTEM_DRIVER
    StartType        = 2                            ;SERVICE_SYSTEM_START
    ErrorControl     = 1                            ;SERVICE_ERROR_NORMAL
    LoadOrderGroup   = "FSFilter Activity Monitor"
    AddReg           = Minispy.AddRegistry
    ;Instances specific information.
    DefaultInstance         = "Minispy - Top Instance"
    Instance1.Name          = "Minispy - Middle Instance"
    Instance1.Altitude      = "370000"
    Instance1.Flags         = 0x1          ; Suppress automatic attachments
    Instance2.Name          = "Minispy - Bottom Instance"
    Instance2.Altitude      = "361000"
    Instance2.Flags         = 0x1          ; Suppress automatic attachments
    Instance3.Name          = "Minispy - Top Instance"
    Instance3.Altitude      = "385100"
    Instance3.Flags         = 0x1          ; Suppress automatic attachment
    Can you please let us know how to fix this issue? Whether we need to change any configuration in inf file?
    For Online backup use StoreGrid. Its really cool

    Hi,
    We have written a filter driver to track Hyper-V CSV volumes in order to track the modifications in those volumes for backup purpose. When the Hyper-V host is running, we are able to attach the CSV volumes from the driver without any issues. But during Hyper-V
    host startup, our driver failed to attach the csv volumes.
    We suspect that filter driver failed to attach CSV volume, since Cluster service was not started at that point of time during the system start up. If we attach the CSV volume later, it works. However, for the continuos tracking we want our driver
    to track the modifications from the system startup itself. I believe, we need to load the filter driver once after the csv service is started.  
    Configurations of filter driver are as following(inf file).
    DisplayName      = %ServiceName%
    Description      = %ServiceDescription%
    ServiceBinary    = %12%\%DriverName%.sys        ;%windir%\system32\drivers\
    Dependencies     = FltMgr
    ServiceType      = 2                            ;SERVICE_FILE_SYSTEM_DRIVER
    StartType        = 2                            ;SERVICE_SYSTEM_START
    ErrorControl     = 1                            ;SERVICE_ERROR_NORMAL
    LoadOrderGroup   = "FSFilter Activity Monitor"
    AddReg           = Minispy.AddRegistry
    ;Instances specific information.
    DefaultInstance         = "Minispy - Top Instance"
    Instance1.Name          = "Minispy - Middle Instance"
    Instance1.Altitude      = "370000"
    Instance1.Flags         = 0x1          ; Suppress automatic attachments
    Instance2.Name          = "Minispy - Bottom Instance"
    Instance2.Altitude      = "361000"
    Instance2.Flags         = 0x1          ; Suppress automatic attachments
    Instance3.Name          = "Minispy - Top Instance"
    Instance3.Altitude      = "385100"
    Instance3.Flags         = 0x1          ; Suppress automatic attachment
    Can you please let us know how to fix this issue? Whether we need to change any configuration in inf file?
    For Online backup use StoreGrid. Its really cool

  • CS6 and Application manager failed to initialize OSX

    Hi,
    I've been trying to install Flash Professional CS6 for a few days now with no luck. I've gone through as many posts as I can find to help, but nothing I have found has worked so far. Both Flash and the Application Manager failed to Inialize. I'd appreciate any help!
    I'm on Mac 10.7.5
    I've redownloaded the .dmg file for flash 3 different times now with the same results:
    Tue Mar  5 10:30:02 2013
    [INFO] PIM - PIMSqlite closeDB status 0
    Tue Mar  5 10:30:02 2013
    [INFO] PIM - FREE PIM Instance ...
    Tue Mar  5 10:33:45 2013
    [INFO] Setup - Build Version - 6.0.335.0
    Tue Mar  5 10:33:45 2013
    [INFO] Setup - Logging Level verbosity Set  to 4
    Tue Mar  5 10:33:45 2013
    [INFO] Setup - TimeLog: Bootstrapper Start
    Tue Mar  5 10:33:45 2013
    [INFO] Setup - TimeLog: Start initial checks
    Tue Mar  5 10:33:45 2013
    [INFO] Setup - Launch Path set to /Volumes/Adobe Flash Professional CS6/Adobe Flash Professional CS6
    Tue Mar  5 10:33:45 2013
    [INFO] Setup - Found 6 packages in setup manifest
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - Build Version - 6.0.335.0
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - Logging Level verbosity Set  to 4
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - Build Version - 6.0.335.0
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - Logging Level verbosity Set  to 4
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - CREATE PIM Instance ...
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - trying to createOrUpdatePIMDbSchema.
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - SUCCESS Created Tables.
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - PIM Database is Up To Date.
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - Updater Inventory location:/Volumes/Adobe Flash Professional CS6/Adobe Flash Professional CS6/Install.app/Contents/Frameworks/UpdaterInventory.framework/UpdaterInventory
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - PackageCheck: Package id DF1EA1EE-7B19-4CC4-8950-BEB6D7F70191 not installed on the system. Size required: 49365843
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - PackageCheck: Package id 36C746D4-D32C-422A-9B0F-F3719DAA3DF8 not installed on the system. Size required: 2889421
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - PackageCheck: Package id 5C2E838A-E0AD-4727-B8FD-54DA0C7A6FBB not installed on the system. Size required: 15633430
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - PackageCheck: Package id B5032FD8-3CFB-4FA1-9051-811EB16A189B not installed on the system. Size required: 4237309
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - PackageCheck: Package id 59792158-B2AE-4670-8F68-EB7DE9535F3D not installed on the system. Size required: 13952220
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - PackageCheck: Package id 7EF4FA31-DD11-4D7E-A9D0-7C1526746C65 not installed on the system. Size required: 16135843
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - PackageCheck: Package id F07FC360-0D5A-46FA-97FE-D317850ECBFF not installed on the system. Size required: 22302498
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 136968220
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - freeDiskSpace ... 20396142592
    Tue Mar  5 10:33:45 2013
    [INFO] Setup - TimeLog: End initial checks
    Tue Mar  5 10:33:45 2013
    [INFO] Setup - TimeLog: Begin Installing
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - START installPackage at file /Volumes/Adobe Flash Professional CS6/Adobe Flash Professional CS6/packages/core/PDApp.pimx
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - Validating package file: '/Volumes/Adobe Flash Professional CS6/Adobe Flash Professional CS6/packages/core/PDApp.pimx'
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - Validating package file: '/Volumes/Adobe Flash Professional CS6/Adobe Flash Professional CS6/packages/core/PDApp.pima'
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - SUCCESS insertPackageUpdateList.
    Tue Mar  5 10:33:45 2013
    [INFO] PIM - SUCCESS insertAppletRegInfoList.
    Tue Mar  5 10:33:48 2013
    [INFO] PIM - NOTE Failed to mount the package dmg. checking if already mounted...
    Tue Mar  5 10:33:48 2013
    [FATAL] PIM - Error Failed to mount the package dmg.
    Tue Mar  5 10:33:48 2013
    [FATAL] PIM - Error Failed to extract assets...
    Tue Mar  5 10:33:49 2013
    [FATAL] Setup - Error installing core /Volumes/Adobe Flash Professional CS6/Adobe Flash Professional CS6/packages/core/PDApp.pimx package. pim_installPackage returned -8
    Tue Mar  5 10:33:49 2013
    [FATAL] Setup - Error installing Packages.
    Tue Mar  5 10:33:52 2013
    [INFO] Setup - =================  Exiting Installer with Code: 0  =================
    And when I install the Application Manager I get:
    03/05/13 10:50:51:017 | [INFO] |  | ASU | Setup | Setup |  |  | 7867999 | Build Version - 7.0.0.235
    03/05/13 10:50:51:017 | [INFO] |  | ASU | Setup | Setup |  |  | 7867999 | Logging Level verbosity Set  to 4
    03/05/13 10:50:51:017 | [INFO] |  | ASU | Setup | Setup |  |  | 7867999 | TimeLog: Bootstrapper Start
    03/05/13 10:50:51:017 | [INFO] |  | ASU | Setup | Setup |  |  | 7867999 | Patch Signature file exists
    03/05/13 10:50:54:593 | [INFO] |  | ASU | Setup | Setup |  |  | 7868121 | Build Version - 7.0.0.235
    03/05/13 10:50:54:593 | [INFO] |  | ASU | Setup | Setup |  |  | 7868121 | Logging Level verbosity Set  to 4
    03/05/13 10:50:54:593 | [INFO] |  | ASU | Setup | Setup |  |  | 7868121 | TimeLog: Bootstrapper Start
    03/05/13 10:50:54:593 | [INFO] |  | ASU | Setup | Setup |  |  | 7868121 | Patch Signature file exists
    03/05/13 10:50:54:684 | [INFO] |  | ASU | Setup | Setup |  |  | 7868121 | TimeLog: Start initial checks
    03/05/13 10:50:54:684 | [INFO] |  | ASU | Setup | Setup |  |  | 7868121 | Launch Path set to /Volumes/Adobe App Mgr/Adobe Application Manager 6.2
    03/05/13 10:50:54:693 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | Build Version - 7.0.0.233
    03/05/13 10:50:54:693 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | Logging Level verbosity Set  to 4
    03/05/13 10:50:54:693 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | Build Version - 7.0.0.233
    03/05/13 10:50:54:693 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | Logging Level verbosity Set  to 4
    03/05/13 10:50:54:693 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | CREATE PIM Instance ...
    03/05/13 10:50:54:694 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | trying to createOrUpdatePIMDbSchema.
    03/05/13 10:50:54:695 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | Current db schema version on machine 1.
    03/05/13 10:50:54:695 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | Current db schema version to install 1.
    03/05/13 10:50:54:695 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | PIM DB Schema is up to date. Current schema version is 1.
    03/05/13 10:50:54:695 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | PIM Database is Up To Date.
    03/05/13 10:50:54:695 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | Updater Inventory location:/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/Install.app/Contents/Frameworks/UpdaterInventory.framework/Versions/A/UpdaterInventor y
    03/05/13 10:50:54:696 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | Acquired System level ACF lock ...
    03/05/13 10:50:54:696 | [INFO] |  | ASU | Setup | Setup |  |  | 7868121 | TimeLog: End initial checks
    03/05/13 10:50:54:696 | [INFO] |  | ASU | Setup | Setup |  |  | 7868126 | TimeLog: Begin Installing
    03/05/13 10:50:54:697 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Current OS version is: Major:10, Minor:7, ServicePack:5
    03/05/13 10:50:54:739 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Package id 52D917D5-7BAA-4711-B658-654A355CFB4E is already installed
    03/05/13 10:50:54:830 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Package id 37DD9F8C-F8B1-4FA7-A56F-593A91521C36 is already installed
    03/05/13 10:50:54:861 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Package id 4B8D1971-A8EA-4692-8980-C81886B6575E is already installed
    03/05/13 10:50:55:202 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 103970419
    03/05/13 10:50:55:202 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | freeDiskSpace ... 20509077504
    03/05/13 10:50:55:202 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Executing Adobe Genuine Validation for all the AAM packages
    03/05/13 10:50:55:202 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/core/PDApp.pimx'
    03/05/13 10:50:55:205 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/core/PDApp.pima'
    03/05/13 10:50:55:207 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/D6/D6.pimx'
    03/05/13 10:50:55:209 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/D6/D6.pima'
    03/05/13 10:50:55:211 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DECore/DECore.pimx'
    03/05/13 10:50:55:213 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DECore/DECore.pima'
    03/05/13 10:50:55:215 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DWA/DWA.pimx'
    03/05/13 10:50:55:217 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DWA/DWA.pima'
    03/05/13 10:50:55:219 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/P6/P6.pimx'
    03/05/13 10:50:55:221 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/P6/P6.pima'
    03/05/13 10:50:55:224 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/LWA/LWA.pimx'
    03/05/13 10:50:55:226 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/LWA/LWA.pima'
    03/05/13 10:50:55:228 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/UWA/UWA.pimx'
    03/05/13 10:50:55:231 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/UWA/UWA.pima'
    03/05/13 10:50:55:233 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/CCM/CCM.pimx'
    03/05/13 10:50:55:235 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/CCM/CCM.pima'
    03/05/13 10:50:55:238 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Adobe Genuine Validation PASSED for all the AAM packages
    03/05/13 10:50:55:238 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | START installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/core/PDApp.pimx
    03/05/13 10:50:55:277 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Package id 52D917D5-7BAA-4711-B658-654A355CFB4E is already installed
    03/05/13 10:50:55:289 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deleteAppletRegInfoRecords.
    03/05/13 10:50:55:309 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deletePackageUpgradeInfoRecords.
    03/05/13 10:50:55:309 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deletePackageInstallationInfoRecords.
    03/05/13 10:50:55:414 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS insertPackageUpdateList.
    03/05/13 10:50:55:419 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS insertAppletRegInfoList.
    03/05/13 10:50:56:584 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/core/PDApp.pimx.
    03/05/13 10:50:56:589 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | START installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/D6/D6.pimx
    03/05/13 10:50:56:609 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Package id 37DD9F8C-F8B1-4FA7-A56F-593A91521C36 is already installed
    03/05/13 10:50:56:624 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deleteAppletRegInfoRecords.
    03/05/13 10:50:56:634 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deletePackageUpgradeInfoRecords.
    03/05/13 10:50:56:634 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deletePackageInstallationInfoRecords.
    03/05/13 10:50:56:687 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS insertPackageUpdateList.
    03/05/13 10:50:56:690 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS insertAppletRegInfoList.
    03/05/13 10:50:57:061 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/D6/D6.pimx.
    03/05/13 10:50:57:064 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | START installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DECore/DECore.pimx
    03/05/13 10:50:57:083 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Package id 4B8D1971-A8EA-4692-8980-C81886B6575E is already installed
    03/05/13 10:50:57:113 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deleteAppletRegInfoRecords.
    03/05/13 10:50:57:123 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deletePackageUpgradeInfoRecords.
    03/05/13 10:50:57:123 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deletePackageInstallationInfoRecords.
    03/05/13 10:50:57:173 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS insertPackageUpdateList.
    03/05/13 10:50:57:175 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS insertAppletRegInfoList.
    03/05/13 10:50:57:604 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DECore/DECore.pimx.
    03/05/13 10:50:57:607 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | START installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DWA/DWA.pimx
    03/05/13 10:50:57:654 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deleteAppletRegInfoRecords.
    03/05/13 10:50:57:657 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deletePackageUpgradeInfoRecords.
    03/05/13 10:50:57:657 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS deletePackageInstallationInfoRecords.
    03/05/13 10:50:57:700 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS insertPackageUpdateList.
    03/05/13 10:50:57:702 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | SUCCESS insertAppletRegInfoList.
    03/05/13 10:51:00:308 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | NOTE Failed to mount the package dmg. checking if already mounted...
    03/05/13 10:51:00:401 | [FATAL] |  | ASU | PIM | PIM |  |  | 7868126 | Error Failed to mount the package dmg.
    03/05/13 10:51:00:402 | [FATAL] |  | ASU | PIM | PIM |  |  | 7868126 | Error Failed to extract assets...
    03/05/13 10:51:00:408 | [INFO] |  | ASU | PIM | PIM |  |  | 7868126 | Package installation failed
    03/05/13 10:51:00:409 | [FATAL] |  | ASU | Setup | Setup |  |  | 7868126 | Error installing Packages.
    03/05/13 10:51:01:960 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | PIMSqlite closeDB status 0
    03/05/13 10:51:01:960 | [INFO] |  | ASU | PIM | PIM |  |  | 7868121 | FREE PIM Instance ...
    03/05/13 10:52:07:384 | [INFO] |  | ASU | Setup | Setup |  |  | 7874102 | Build Version - 7.0.0.235
    03/05/13 10:52:07:384 | [INFO] |  | ASU | Setup | Setup |  |  | 7874102 | Logging Level verbosity Set  to 4
    03/05/13 10:52:07:384 | [INFO] |  | ASU | Setup | Setup |  |  | 7874102 | TimeLog: Bootstrapper Start
    03/05/13 10:52:07:384 | [INFO] |  | ASU | Setup | Setup |  |  | 7874102 | Patch Signature file exists
    03/05/13 10:52:10:354 | [INFO] |  | ASU | Setup | Setup |  |  | 7874215 | Build Version - 7.0.0.235
    03/05/13 10:52:10:354 | [INFO] |  | ASU | Setup | Setup |  |  | 7874215 | Logging Level verbosity Set  to 4
    03/05/13 10:52:10:354 | [INFO] |  | ASU | Setup | Setup |  |  | 7874215 | TimeLog: Bootstrapper Start
    03/05/13 10:52:10:354 | [INFO] |  | ASU | Setup | Setup |  |  | 7874215 | Patch Signature file exists
    03/05/13 10:52:10:419 | [INFO] |  | ASU | Setup | Setup |  |  | 7874215 | TimeLog: Start initial checks
    03/05/13 10:52:10:419 | [INFO] |  | ASU | Setup | Setup |  |  | 7874215 | Launch Path set to /Volumes/Adobe App Mgr/Adobe Application Manager 6.2
    03/05/13 10:52:10:429 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | Build Version - 7.0.0.233
    03/05/13 10:52:10:429 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | Logging Level verbosity Set  to 4
    03/05/13 10:52:10:429 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | Build Version - 7.0.0.233
    03/05/13 10:52:10:429 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | Logging Level verbosity Set  to 4
    03/05/13 10:52:10:429 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | CREATE PIM Instance ...
    03/05/13 10:52:10:430 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | trying to createOrUpdatePIMDbSchema.
    03/05/13 10:52:10:431 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | Current db schema version on machine 1.
    03/05/13 10:52:10:431 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | Current db schema version to install 1.
    03/05/13 10:52:10:431 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | PIM DB Schema is up to date. Current schema version is 1.
    03/05/13 10:52:10:431 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | PIM Database is Up To Date.
    03/05/13 10:52:10:431 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | Updater Inventory location:/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/Install.app/Contents/Frameworks/UpdaterInventory.framework/Versions/A/UpdaterInventor y
    03/05/13 10:52:10:432 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | Acquired System level ACF lock ...
    03/05/13 10:52:10:432 | [INFO] |  | ASU | Setup | Setup |  |  | 7874215 | TimeLog: End initial checks
    03/05/13 10:52:10:432 | [INFO] |  | ASU | Setup | Setup |  |  | 7874222 | TimeLog: Begin Installing
    03/05/13 10:52:10:433 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Current OS version is: Major:10, Minor:7, ServicePack:5
    03/05/13 10:52:10:474 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Package id 52D917D5-7BAA-4711-B658-654A355CFB4E is already installed
    03/05/13 10:52:10:566 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Package id 37DD9F8C-F8B1-4FA7-A56F-593A91521C36 is already installed
    03/05/13 10:52:10:597 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Package id 4B8D1971-A8EA-4692-8980-C81886B6575E is already installed
    03/05/13 10:52:10:934 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 103970419
    03/05/13 10:52:10:935 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | freeDiskSpace ... 20508778496
    03/05/13 10:52:10:935 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Executing Adobe Genuine Validation for all the AAM packages
    03/05/13 10:52:10:935 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/core/PDApp.pimx'
    03/05/13 10:52:10:937 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/core/PDApp.pima'
    03/05/13 10:52:10:939 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/D6/D6.pimx'
    03/05/13 10:52:10:941 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/D6/D6.pima'
    03/05/13 10:52:10:943 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DECore/DECore.pimx'
    03/05/13 10:52:10:945 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DECore/DECore.pima'
    03/05/13 10:52:10:947 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DWA/DWA.pimx'
    03/05/13 10:52:10:950 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DWA/DWA.pima'
    03/05/13 10:52:10:951 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/P6/P6.pimx'
    03/05/13 10:52:10:954 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/P6/P6.pima'
    03/05/13 10:52:10:956 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/LWA/LWA.pimx'
    03/05/13 10:52:10:958 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/LWA/LWA.pima'
    03/05/13 10:52:10:960 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/UWA/UWA.pimx'
    03/05/13 10:52:10:963 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/UWA/UWA.pima'
    03/05/13 10:52:10:965 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/CCM/CCM.pimx'
    03/05/13 10:52:10:967 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Validating package file: '/Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/CCM/CCM.pima'
    03/05/13 10:52:10:969 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Adobe Genuine Validation PASSED for all the AAM packages
    03/05/13 10:52:10:969 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | START installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/core/PDApp.pimx
    03/05/13 10:52:11:009 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Package id 52D917D5-7BAA-4711-B658-654A355CFB4E is already installed
    03/05/13 10:52:11:022 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deleteAppletRegInfoRecords.
    03/05/13 10:52:11:040 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deletePackageUpgradeInfoRecords.
    03/05/13 10:52:11:041 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deletePackageInstallationInfoRecords.
    03/05/13 10:52:11:146 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS insertPackageUpdateList.
    03/05/13 10:52:11:152 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS insertAppletRegInfoList.
    03/05/13 10:52:13:547 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/core/PDApp.pimx.
    03/05/13 10:52:13:551 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | START installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/D6/D6.pimx
    03/05/13 10:52:13:571 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Package id 37DD9F8C-F8B1-4FA7-A56F-593A91521C36 is already installed
    03/05/13 10:52:13:579 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deleteAppletRegInfoRecords.
    03/05/13 10:52:13:589 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deletePackageUpgradeInfoRecords.
    03/05/13 10:52:13:589 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deletePackageInstallationInfoRecords.
    03/05/13 10:52:13:643 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS insertPackageUpdateList.
    03/05/13 10:52:13:646 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS insertAppletRegInfoList.
    03/05/13 10:52:14:016 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/D6/D6.pimx.
    03/05/13 10:52:14:033 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | START installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DECore/DECore.pimx
    03/05/13 10:52:14:052 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Package id 4B8D1971-A8EA-4692-8980-C81886B6575E is already installed
    03/05/13 10:52:14:068 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deleteAppletRegInfoRecords.
    03/05/13 10:52:14:078 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deletePackageUpgradeInfoRecords.
    03/05/13 10:52:14:078 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deletePackageInstallationInfoRecords.
    03/05/13 10:52:14:127 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS insertPackageUpdateList.
    03/05/13 10:52:14:129 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS insertAppletRegInfoList.
    03/05/13 10:52:14:467 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DECore/DECore.pimx.
    03/05/13 10:52:14:470 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | START installPackage at file /Volumes/Adobe App Mgr/Adobe Application Manager 6.2/packages/DWA/DWA.pimx
    03/05/13 10:52:14:526 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deleteAppletRegInfoRecords.
    03/05/13 10:52:14:529 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deletePackageUpgradeInfoRecords.
    03/05/13 10:52:14:529 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS deletePackageInstallationInfoRecords.
    03/05/13 10:52:14:572 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS insertPackageUpdateList.
    03/05/13 10:52:14:574 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | SUCCESS insertAppletRegInfoList.
    03/05/13 10:52:18:070 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | NOTE Failed to mount the package dmg. checking if already mounted...
    03/05/13 10:52:18:164 | [FATAL] |  | ASU | PIM | PIM |  |  | 7874222 | Error Failed to mount the package dmg.
    03/05/13 10:52:18:164 | [FATAL] |  | ASU | PIM | PIM |  |  | 7874222 | Error Failed to extract assets...
    03/05/13 10:52:18:170 | [INFO] |  | ASU | PIM | PIM |  |  | 7874222 | Package installation failed
    03/05/13 10:52:18:170 | [FATAL] |  | ASU | Setup | Setup |  |  | 7874222 | Error installing Packages.
    03/05/13 10:52:19:149 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | PIMSqlite closeDB status 0
    03/05/13 10:52:19:149 | [INFO] |  | ASU | PIM | PIM |  |  | 7874215 | FREE PIM Instance ...

    Can you Try the new Adobe Application Manager Patch and Install using it.
    http://www.adobe.com/applicationmanagerpatch/index.html
    Cheers!

  • Clean Install Solaris 10 05/09 - Update Manager Fails with Valid Acct

    I have a clean install of Solaris 10 05/09, and Update Manager fails to register using a valid accout which I can login with at the Sun website. Why is this happening? How can this be fixed?

    Here's the output from the script....
    User: root
    Logname: root
    Tue Oct 6 15:35:18 EDT 2009
    unknown
    smpatch settings:
    patchpro.backout.directory - ""
    patchpro.baseline.directory - /var/sadm/spool
    patchpro.download.directory - /var/sadm/spool
    patchpro.install.types - rebootafter:reconfigafter:standard
    patchpro.patch.source - https://getupdates1.sun.com/
    patchpro.patchset - current2
    patchpro.proxy.host - ""
    patchpro.proxy.passwd **** ****
    patchpro.proxy.port - 8080
    patchpro.proxy.user - ""
    smpatch analyze:
    Failure: Cannot connect to retrieve current2.zip: This system is currently unreg istered and is unable to retrieve patches from the Sun Update Connection. Please register your system using the Update Manager, /usr/bin/updatemanager or provid e valid Sun Online Account(SOA) credentials.
    Entitlement:
    cat: cannot open /var/sadm/spool/cache/entitlement/*entitlement_client
    Sun UC patch revision:
    120336-04
    121082-06
    121119-16
    121454-02
    123004-03
    123006-07
    123631-03
    123896-05
    123896-15
    124187-07
    137138-09
    Solaris release:
    Solaris 10 5/09 s10x_u7wos_08 X86
    Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 30 March 2009
    Solaris Kernel: Generic_141415-10
    Machine Type: i86pc
    Platform: i86pc
    Java versions:
    System default:
    java version "1.5.0_21"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_21-b01)
    Java HotSpot(TM) Client VM (build 1.5.0_21-b01, mixed mode, sharing)
    Java 5:
    java version "1.5.0_21"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_21-b01)
    Java HotSpot(TM) Client VM (build 1.5.0_21-b01, mixed mode, sharing)
    Java 6:
    Unable to locate JRE meeting specification "1.6*"
    Java used by smpatch and updatemanager:
    /usr/sbin/pprosvc:JAVACMD="/usr/jdk/latest/bin/java -version:1.5*"
    /bin/updatemanager:JAVA_EXEC="/usr/jdk/latest/bin/java -version:1.5*"
    Cacao Java version:
    java-home=/usr/jdk/jdk1.5.0_21
    Cacao Base Directories:
    cacao.install.rt.base.dir=/
    cacao.install.etc.base.dir=/
    Software Cluster:
    CLUSTER=SUNWCall
    All ccr properties:
    18:
    Property not defined: 18
    cns.assetid:
    cns.br.SunUCenabled:
    true
    cns.ccr.keyGenPath:
    /usr/lib/cc-ccr/bin/ccrKeyGen
    cns.clientid:
    cns.httpproxy.auth:
    cns.httpproxy.ipaddr:
    cns.httpproxy.port:
    cns.regtoken:
    cns.security.password:
    cns.security.privatekey:
    cns.security.publickey:
    cns.swup.UMautolaunch:
    false
    cns.swup.autoAnalysis.enabled:
    true
    cns.swup.checkinInterval:
    2
    cns.swup.lastCheckin:
    0
    cns.swup.patchbaseline:
    current
    cns.swup.regRequired:
    true
    cns.transport.serverurl:
    patchsvr not installed.
    Sun UC package status:
    SUNWbreg not installed
    SUNWdc not installed
    Cacao instances:
    online 15:19:45 svc:/application/management/common-agent-container-1:def ault
    Services in maintenance/disabled state:
    svc:/application/print/server:default (LP print server)
    State: disabled since Tue Oct 06 15:15:37 2009
    Reason: Disabled by an administrator.
    See: http://sun.com/msg/SMF-8000-05
    See: man -M /usr/share/man -s 1M lpsched
    Impact: 2 dependent services are not running:
    svc:/application/print/rfc1179:default
    svc:/application/print/ipp-listener:default
    Please attach /tmp/unknown-061009-suc-out.Z in your reply to the Sun Update Conn ection Technical Support Team.
    #

  • Sources are current and valid. TTLs are however, invalid. Failed to attach update to the automation wrapper, error = 0x87d00215_

    Hi,
    I recently tried to deploy Windows 7 update to my client computers. I am able to download and distribute it to DP, but somehow it wouldn't install into my client computers. Can anyone help me? Below text is copied from my scanagent.log and updatesdeployment.log
    files from my client computer.
    Any assistance is highly appreciated.
    Scanagent.log
    - - Calling back to client on Scan request complete... ScanAgent 4/10/2014 8:01:17 AM 77868 (0x1302C)
    CScanAgent::ScanComplete- Scan completion received. ScanAgent 4/10/2014 8:01:17 AM 77868 (0x1302C)
    - -Processing Scan Job TTL invalidity request ScanAgent 4/10/2014 8:04:34 AM 75864 (0x12858)
    - -Processing Scan Job TTL invalidity request ScanAgent 4/10/2014 8:09:29 AM 80536 (0x13A98)
    *****ScanByUpdates request received with ForceReScan=0, ScanOptions=0x00000008,  WSUSLocationTimeout = 604800 ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    - - -Evaluating Update Status... ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    Found CategoryID of :bfe5b177-a086-47a0-b102-097e4fa1f807 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    CScanAgent::ScanByUpdates - Found UpdateClassification 0fa1201d-4330-4fa8-8ae9-b877473b6441 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    Sources are current and valid. TTLs are however, invalid. ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    Sources are Valid, so converting to Offline Scan. ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJob::Scan- Requesting Offline Scan with last known location. ScanAgent 4/10/2014 8:50:32 AM 90080 (0x15FE0)
    No CatScan history exists ScanAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    Sources are current and valid. TTLs are however, invalid. ScanAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJob::Execute- Requesting scan with CategoryIDs=BFE5B177-A086-47A0-B102-097E4FA1F807 ScanAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): Scan Succeeded, setting flag that performed scan was catscan ScanAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJob::OnScanComplete - Scan completed successfully, ScanType=2 ScanAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJobManager::OnScanComplete -ScanJob is completed. ScanAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    ScanJob({1B5BE021-EAEF-43E2-A7A2-329D803F2248}): CScanJobManager::OnScanComplete - Reporting Scan request complete to clients... ScanAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    - - -Evaluating Update Status... ScanAgent 4/10/2014 8:50:41 AM 90080 (0x15FE0)
    - - Calling back to client on Scan request complete... ScanAgent 4/10/2014 8:50:41 AM 90080 (0x15FE0)
    UpdatesDeployment.log
    Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>' UpdatesDeploymentAgent 4/10/2014 8:04:34 AM 75864
    (0x12858)
    Removing scan history to force non cached results UpdatesDeploymentAgent 4/10/2014 8:04:34 AM 75864 (0x12858)
    Evaluation initiated for (0) assignments. UpdatesDeploymentAgent 4/10/2014 8:04:34 AM 75864 (0x12858)
    Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>' UpdatesDeploymentAgent 4/10/2014 8:09:29 AM 80536
    (0x13A98)
    Removing scan history to force non cached results UpdatesDeploymentAgent 4/10/2014 8:09:29 AM 80536 (0x13A98)
    Evaluation initiated for (0) assignments. UpdatesDeploymentAgent 4/10/2014 8:09:29 AM 80536 (0x13A98)
    Message received: '<?xml version='1.0' ?>
     <CIAssignmentMessage MessageType='EnforcementDeadline'>
         <AssignmentID>{85D3A208-0AE4-46F6-87C3-8A94CCA8361C}</AssignmentID>
     </CIAssignmentMessage>' UpdatesDeploymentAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    Assignment {85D3A208-0AE4-46F6-87C3-8A94CCA8361C} has total CI = 1 UpdatesDeploymentAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    Deadline received for assignment ({85D3A208-0AE4-46F6-87C3-8A94CCA8361C}) UpdatesDeploymentAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    Detection job ({D4D22069-E341-476B-9048-4C4FAFF7075D}) started for assignment ({85D3A208-0AE4-46F6-87C3-8A94CCA8361C}) UpdatesDeploymentAgent 4/10/2014 8:50:32 AM 94188 (0x16FEC)
    DetectJob completion received for assignment ({85D3A208-0AE4-46F6-87C3-8A94CCA8361C}) UpdatesDeploymentAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    Raising client SDK event for class CCM_SoftwareUpdate, instance CCM_SoftwareUpdate.UpdateID="Site_95D1BDFA-B063-4820-8D5D-497ECA9F10BB/SUM_eaf2ae60-e6f3-4d39-a014-ae25e07361a6", actionType 12l, value NULL, user NULL, session 4294967295l, level 0l,
    verbosity 30l UpdatesDeploymentAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    Update (Site_95D1BDFA-B063-4820-8D5D-497ECA9F10BB/SUM_eaf2ae60-e6f3-4d39-a014-ae25e07361a6) added to the targeted list of deployment ({85D3A208-0AE4-46F6-87C3-8A94CCA8361C}) UpdatesDeploymentAgent 4/10/2014 8:50:41 AM 94188 (0x16FEC)
    Failed to attach update to the automation wrapper, error = 0x87d00215 UpdatesDeploymentAgent 4/10/2014 8:50:41 AM 83412 (0x145D4)

    Tested on the following steps:
    1.       Start an elevated command prompt,and run wbemtest.exe
    2.       Click Connect, and specify the path: root\ccm\SoftMgmtAgent and connect
    3.       Select Query, and type select * from DownloadContentRequestEx2
    4.        Select query, and select * from downloadinfoex2
    5.       Delete each instance that returned by the query.
    6.       Restart SMS Agent Host service, and check to confirm the instances didn’t come back.
    7.       Trigger Software update evaluation cycle and try to install update again
    Didn't managed to execute step[5] as there is nothing for me to delete. Once I ran through the above steps, I noticed the following error in ScanAgent.log file. Also, I found some error in ClientIDManagerStartup.log. Can anyone tell me what is wrong
    here? Thanks
    ScanAgent.log
    *****ScanByUpdates request received with ForceReScan=0, ScanOptions=0x00000008,  WSUSLocationTimeout = 604800 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    - - -Evaluating Update Status... 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    Found CategoryID of :bfe5b177-a086-47a0-b102-097e4fa1f807 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    CScanAgent::ScanByUpdates - Found UpdateClassification 0fa1201d-4330-4fa8-8ae9-b877473b6441 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    Sources are current and valid. TTLs are however, invalid. 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    Sources are Valid, so converting to Offline Scan. 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    ScanJob({8985F022-97C1-4D5E-80FF-4385E36D3316}): CScanJob::Scan- Requesting Offline Scan with last known location. 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    Catscan history version is up-to-date and TTL is valid 4/10/2014 9:30:00 AM 108228 (0x1A6C4)
    ScanJob({8985F022-97C1-4D5E-80FF-4385E36D3316}): CScanJob::Execute - SKIPPING SCAN and Using cached results, ScanType=2 4/10/2014 9:30:00 AM 108228 (0x1A6C4)
    ScanJob({8985F022-97C1-4D5E-80FF-4385E36D3316}): CScanJobManager::OnScanComplete -ScanJob is completed. 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    ScanJob({8985F022-97C1-4D5E-80FF-4385E36D3316}): CScanJobManager::OnScanComplete - Reporting Scan request complete to clients... 4/10/2014 9:30:00 AM 105440 (0x19BE0)
    - - -Evaluating Update Status... 4/10/2014 9:30:00 AM 108228 (0x1A6C4)
    - - Calling back to client on Scan request complete... 4/10/2014 9:30:00 AM 108228 (0x1A6C4)
    - -Recovering persisted Scan requests... 4/10/2014 9:31:55 AM 106812 (0x1A13C)
    ScanJob({0A14B277-B6B7-4D3A-B945-9E9586EAA3B6}): CScanJob::Scan - Recovered Scan request waiting for ScanRetry, but MAX Scan Retry is completed. No Scan Retry will be attempted, returning E_FAIL. 4/10/2014 9:31:55 AM 106812 (0x1A13C)
    ScanJob({0A14B277-B6B7-4D3A-B945-9E9586EAA3B6}): CScanJobManager::Initialize - failed at CScanJob::Scan() with Error=0x80004005 4/10/2014 9:31:55 AM 106812 (0x1A13C)
    CScanAgent::OnStartup - failed at Initialize with error=0x80004005 4/10/2014 9:31:55 AM 106812 (0x1A13C)
    - -Processing Scan Job TTL invalidity request 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    *****ScanByUpdates request received with ForceReScan=0, ScanOptions=0x00000008,  WSUSLocationTimeout = 604800 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    - - -Evaluating Update Status... 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    Found CategoryID of :bfe5b177-a086-47a0-b102-097e4fa1f807 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    CScanAgent::ScanByUpdates - Found UpdateClassification 0fa1201d-4330-4fa8-8ae9-b877473b6441 for Update:eaf2ae60-e6f3-4d39-a014-ae25e07361a6 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    Sources are current and valid. TTLs are however, invalid. 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    Sources are Valid, so converting to Offline Scan. 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJob::Scan- Requesting Offline Scan with last known location. 4/10/2014 9:32:30 AM 107756 (0x1A4EC)
    No CatScan history exists 4/10/2014 9:32:30 AM 106040 (0x19E38)
    Sources are current and valid. TTLs are however, invalid. 4/10/2014 9:32:30 AM 106040 (0x19E38)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJob::Execute- Requesting scan with CategoryIDs=BFE5B177-A086-47A0-B102-097E4FA1F807 4/10/2014 9:32:30 AM 106040 (0x19E38)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): Scan Succeeded, setting flag that performed scan was catscan 4/10/2014 9:32:44 AM 107756 (0x1A4EC)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJob::OnScanComplete - Scan completed successfully, ScanType=2 4/10/2014 9:32:44 AM 107756 (0x1A4EC)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJobManager::OnScanComplete -ScanJob is completed. 4/10/2014 9:32:44 AM 107756 (0x1A4EC)
    ScanJob({5FD26726-F1E3-4C33-BF65-21EFEF9EC0BF}): CScanJobManager::OnScanComplete - Reporting Scan request complete to clients... 4/10/2014 9:32:44 AM 107756 (0x1A4EC)
    - - -Evaluating Update Status... 4/10/2014 9:32:44 AM 106040 (0x19E38)
    - - Calling back to client on Scan request complete... 4/10/2014 9:32:44 AM 106040 (0x19E38)
    ClientIDManagerStartup.log
    [----- SHUTDOWN -----] 4/10/2014 9:31:37 AM 3976 (0x0F88)
    [----- STARTUP -----] 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Machine: GHQ-ITD-LT036 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    OS Version: 6.1 Service Pack 1 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    SCCM Client Version: 5.00.7804.1000 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    'RDV' Identity store does not support backup. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    CCM Identity is in sync with Identity stores 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    'RDV' Identity store does not support backup. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Client is set to use HTTPS when available. The current state is 480. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Begin searching client certificates based on Certificate Issuers 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Completed searching client certificates based on Certificate Issuers 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Begin to select client certificate 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    There are no certificates in the 'MY' store. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Raising event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     ClientID = "GUID:88760DF6-ABF1-4131-829D-365431082860";
     DateTime = "20141004013141.072000+000";
     HRESULT = "0x87d00280";
     ProcessID = 104240;
     ThreadID = 105612;
     4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Failed to submit event to the Status Agent. Attempting to create pending event. 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Raising pending event:
    instance of CCM_ServiceHost_CertRetrieval_Status
     ClientID = "GUID:88760DF6-ABF1-4131-829D-365431082860";
     DateTime = "20141004013141.072000+000";
     HRESULT = "0x87d00280";
     ProcessID = 104240;
     ThreadID = 105612;
     4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Unable to find PKI Certificate matching SCCM certificate selection criteria. 0x87d00280 4/10/2014 9:31:41 AM 105612 (0x19C8C)
    Initializing registration renewal for potential PKI issued certificate changes. 4/10/2014 9:31:49 AM 103528 (0x19468)
    Succesfully intialized registration renewal. 4/10/2014 9:31:49 AM 103528 (0x19468)
    [RegTask] - Executing registration task synchronously. 4/10/2014 9:31:49 AM 103528 (0x19468)
    [RegTask] - Client is already registered. Exiting. 4/10/2014 9:31:49 AM 103528 (0x19468)
    Read SMBIOS (encoded): 3600320039003500350031002D003000310052003300390030003000300030003100 4/10/2014 9:31:49 AM 103528 (0x19468)
    Evaluated SMBIOS (encoded): 3600320039003500350031002D003000310052003300390030003000300030003100 4/10/2014 9:31:49 AM 103528 (0x19468)
    No SMBIOS Changed 4/10/2014 9:31:49 AM 103528 (0x19468)
    SMBIOS unchanged 4/10/2014 9:31:49 AM 103528 (0x19468)
    SID unchanged 4/10/2014 9:31:49 AM 103528 (0x19468)
    HWID unchanged 4/10/2014 9:31:51 AM 103528 (0x19468)
    GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE 4/10/2014 9:31:51 AM 103528 (0x19468)

  • RAID manager failed!!!!!!!!!!!

    hi,
    i installed the RAID manager on my server Enterprise 220R, but during the installation it gave me this error:
    drvconfig: driver failed to attach: rdriver
    drvconfig: driver failed to attach: rdriver
    RDAC daemons initiated
    WARNING: set_drivers: No arrays were found that are controlled by either the sd or the ssd driver
    i have SrorEDGE A1000 connected to the server
    PS:at the back panel of the A1000 the "controller active" LED is on..so it whould work, no?!!!
    any advice??
    Thanks.

    Hello,
    the A1000 isn't supported under Solaris 10 (by Sun, under service contract, ...), but works.
    Rainer Orth and Fredrik Lundholm posted instructions on comp.unix.solaris. This an except from the post
    Fredrik Lundholm < ... > wrote:
    RDAC stands for Redundant Disk Array Controller Support, and is only
    needed for path failover on RSM2000/A3000/A3500/A3500FC. Since A1000
    only has a single controller it is not needed. rm6 talks to the A1000
    through Lun 0.I had complained loudly during Solaris 10 Platinum Beta when I first
    learned about removal of RM6/A1000 support in S10 FCS *without any
    appropriate prior notice (i.e.: EOL notices) in S9 Release Notes*.
    Unfortunately, this didn't help to bring the support back, but my support
    engineer quickly determined that RM6 runs just fine with an A1000.
    I later learned that the claimed reason for support removal was that the
    A1000 itself had been EOLed before S10 went FCS.
    Perhaps in some cases RM6 is looking for the RDAC paths in order to
    determine where the modules are? So while the driver isn't technically
    required it can still cause issues by its absence?The rdriver won't load in S10:
    Nov 21 23:24:47 sequoia krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/rdriver: undefined symbol
    Nov 21 23:24:47 sequoia krtld: [ID 826211 kern.notice] 'dev_get_dev_info'
    Nov 21 23:24:47 sequoia krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'rdriver'
    Nov 21 23:24:47 sequoia genunix: [ID 370176 kern.warning] WARNING: forceload of drv/rdriver failed
    Nov 21 23:24:47 sequoia krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/rdriver: undefined symbol
    Nov 21 23:24:47 sequoia krtld: [ID 826211 kern.notice] 'dev_get_dev_info'
    Nov 21 23:24:47 sequoia krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'rdriver'
    But since rdriver and rdnexus are only needed for RDAC (which doesn't do anything useful with the single-controller A1000), I just rem_drv'ed both and disabled RDAC support in /etc/osa/rmparams,
    as I had already done in S8:
    --- rmparams.rm6221 Mon Nov 21 13:29:22 2005
    +++ rmparams Tue Nov 22 00:23:58 2005
    @@ -80,8 +80,9 @@
    # RDAC driver/Resolution Daemon Failover parameters
    -Rdac_SupportDisabled=FALSE
    -Rdac_SinglePathSupportDisabled=FALSE
    +# Disabled, useless on A1000 without redundant controllers
    +Rdac_SupportDisabled=TRUE
    +Rdac_SinglePathSupportDisabled=TRUE
    Rdac_HotAddDisabled=PARTIAL
    Rdac_HotAddIDs:4:5:
    Rdac_NativeScsiDrivers:sd:
    This way, an A1000 works just fine when connected to an E3000 with 4 x 167 MHz UltraSPARC I CPUs running Solaris Express Build 33, including arraymon and the RM6 GUI and CLI interfaces :-)
    I'm actually using it for some ZFS testing, which works amazingly well, considering the old and slow hardware.
    Hope this helps.
    Rainer
    Rainer Orth, Faculty of Technology, Bielefeld University
    The instructions worked for me. I did remove the two forceloads (rdriver, rdnexus) in /etc/system as well.
    Sideeffect: These changes removed the long delay (about 5-10 minutes) during boot Solaris 9/Solaris 10 too.
    Michael

  • /usr/libexec/cups/filter cgpdftoraster failed (Epson Stylus Photo 1400)

    10.5.2 appears to have added support for my printer when it is plugged in to my airport express - before I upgraded it did not work at all, now it works almost perfectly.
    However, when i try to print a book from aperture (Aperture 2.0 Trial), the printer bounces on the dock and the job says that it is working, then an error flashes up and disappears and then the status changes to "stopped".
    I managed to take a screenshot in the second that the error is displayed, and it is as follows:
    "/usr/libexec/cups/filter cgpdftoraster failed"
    I have not tried printing a book when the printer is directly plugged into my laptop yet, as this is the first time that I have ever tried - everything else seems to work perfectly (Printing photos / printing from Lightroom), but not printing this book.
    The printer is an Epson Stylus Photo 1400 (A3+), but it does not seem to be a printer problem - as it never tries to send the file to the printer, it breaks before it gets that far.
    Does anyone know why this is happening and have any suggestions about how to fix it?
    Thanks.

    I concur, Aperture 2.0.1 on OS X 10.5.2 was NOT able to print to the Epson Stylus Photo 1400, and resulted in an "/usr/libexec/cups/filter/cgpdftoraster failed" message at the print driver.
    Exporting the image from Aperture to Photoshop, and printing using Photoshop, printed effortlessly; I was even able to use "Super B" paper (13"x19") Sheet-Feeder Borderless with Ultra Premium Photo Paper Semi-Glossy.

  • SCCM 2012 SP1 Distribution Manager Failed

    I am getting the error below when I send the package to the Distribution point:
    " Distribution Manager failed to find or create the defined share or volume on distribution point"

    Hi,
    Please check Distmgr.log to find the problem.
    The blog that Paul provided seems to be helpful.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot print PDF files: "/usr/lib/cups/filter/pdftops failed"

    Hi
    I have a HP Deskjet D1460 printer (crap, i know ). I'm using hplip 3.11.1 drivers and CUPS 1.4.6hplip 3.11.1.
    Today i wanted to print a pdf file, and my printer just silently refused to work, like they always do I did some log-scavenging, and found this rather long one:
    E [11/Feb/2011:12:44:36 +0100] [Job 24] Job stopped due to filter errors; please consult the error_log file for details.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] The following messages were recorded from 12:44:30 to 12:44:36
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Adding start banner page "none".
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Queued on "Deskjet_D1400" by "kaszak".
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Auto-typing file...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Request file type is application/pdf.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] File of type application/pdf queued by "kaszak".
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Adding end banner page "none".
    D [11/Feb/2011:12:44:36 +0100] [Job 24] job-sheets=none,none
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[0]="Deskjet_D1400"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[1]="24"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[2]="kaszak"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[3]="przelew.pdf"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[4]="1"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[5]="finishings=3 number-up=1 page-ranges=1 job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5 job-originating-host-name=localhost time-at-creation=1297424670 time-at-processing=1297424670 AP_D_InputSlot="
    D [11/Feb/2011:12:44:36 +0100] [Job 24] argv[6]="/var/spool/cups/d00024-001"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[1]="CUPS_DATADIR=/usr/share/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[6]="CUPS_SERVERROOT=/etc/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[7]="CUPS_STATEDIR=/var/run/cups"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[8]="HOME=/var/spool/cups/tmp"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[10]="SERVER_ADMIN=root@localhost"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[11]="SOFTWARE=CUPS/1.4.6"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[12]="TMPDIR=/var/spool/cups/tmp"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[13]="USER=root"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[15]="CUPS_ENCRYPTION=IfRequested"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[16]="IPP_PORT=631"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[17]="CHARSET=utf-8"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[18]="LANG=pl_PL.UTF-8"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[19]="PPD=/etc/cups/ppd/Deskjet_D1400.ppd"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[20]="RIP_MAX_CACHE=8m"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[21]="CONTENT_TYPE=application/pdf"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[22]="DEVICE_URI=hp:/usb/Deskjet_D1400_series?serial=TH7B13311X04Y2"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[23]="PRINTER_INFO="
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[24]="PRINTER_LOCATION="
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[25]="PRINTER=Deskjet_D1400"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[26]="CUPS_FILETYPE=document"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] envp[27]="FINAL_CONTENT_TYPE=printer/Deskjet_D1400"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter /usr/lib/cups/filter/pdftops (PID 2793)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter /usr/lib/cups/filter/foomatic-rip-hplip (PID 2794)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started backend /usr/lib/cups/backend/hp (PID 2795)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter pdftops (PID 2796)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Started filter pstops (PID 2797)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Page = 612x792; 18,36 to 594,783
    D [11/Feb/2011:12:44:36 +0100] [Job 24] slow_collate=0, slow_duplex=0, slow_order=0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_comments - %!PS-Adobe-3.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %!PS-Adobe-3.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%LanguageLevel: 3
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%DocumentSuppliedResources: (atend)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%DocumentMedia: plain 596 842 0 () ()
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%BoundingBox: 0 0 596 842
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%Pages: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] %%EndComments
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_prolog - %%BeginDefaults
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Before copy_setup - %%BeginSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] foomatic-rip version $Revision=3.0.2.131$ running...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Parsing PPD file ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option ColorSpace
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Resolution
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PageSize
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Model
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PrintoutMode
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Quality
    D [11/Feb/2011:12:44:36 +0100] [Job 24] *cupsFilter: "application/vnd.cups-postscript 100 foomatic-rip-hplip"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] *cupsFilter: "application/vnd.cups-pdf 0 foomatic-rip-hplip"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PageRegion
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option ImageableArea
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option PaperDimension
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Added option Font
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Parameter Summary
    D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------------
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Spooler: cups
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Printer: Deskjet_D1400
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Shell: /bin/sh
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PPD file: /etc/cups/ppd/Deskjet_D1400.ppd
    D [11/Feb/2011:12:44:36 +0100] [Job 24] ATTR file:
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Printer model: HP Deskjet d1400 Series hpijs, 3.11.1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Job title: przelew.pdf
    D [11/Feb/2011:12:44:36 +0100] [Job 24] File(s) to be printed:
    D [11/Feb/2011:12:44:36 +0100] [Job 24] <STDIN>
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'finishings=3'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option finishings=3.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'number-up=1'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option number-up=1.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'page-ranges=1'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option page-ranges=1.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option job-uuid=urn:uuid:82dc9ff4-9df7-3643-7cb5-87d5084f99f5.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'job-originating-host-name=localhost'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option job-originating-host-name=localhost.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'time-at-creation=1297424670'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option time-at-creation=1297424670.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'time-at-processing=1297424670'
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option time-at-processing=1297424670.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Pondering option 'AP_D_InputSlot='
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Unknown option AP_D_InputSlot=.
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] ================================================
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] File: <STDIN>
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] ================================================
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Reading PostScript input ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] --> This document is DSC-conforming!
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %RBINumCopies: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Job claims to be DSC-conforming, but "%%BeginProlog" was missing before first line with another "%%Begin..." comment (is this a TeX/LaTeX/dvips-generated PostScript file?). Assuming start of "Prolog" here.
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginProlog
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndProlog
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *PageSize Letter
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PageSize=Letter --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PageSize=Letter --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *PrintoutMode Normal
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PrintoutMode=Normal --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: PrintoutMode=Normal --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginFeature: *Quality FromPrintoutMode
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: Quality=FromPrintoutMode --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Option: Quality=FromPrintoutMode --> Setting option
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Before page loop - %%Page: 1 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Copying page 1...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] pagew = 576.0, pagel = 747.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PageLeft = 18.0, PageRight = 594.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PageTop = 783.0, PageBottom = 36.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PageWidth = 612.0, PageLength = 792.0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Inserting PostScript code for CUPS' page accounting
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] -----------
    D [11/Feb/2011:12:44:36 +0100] [Job 24] New page: 1 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%BeginPageSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Inserting option code into "PageSetup" section.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: %%EndPageSetup
    D [11/Feb/2011:12:44:36 +0100] [Job 24] End of page header
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Stopping search for page header options
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Found: S
    D [11/Feb/2011:12:44:36 +0100] [Job 24] --> Output goes directly to the renderer now.
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Starting renderer
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer PID kid4=2802
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="deskjet 3320" -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Starting process 2803: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
    D [11/Feb/2011:12:44:36 +0100] [Job 24] JCL: <job data>
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PID 2796 (pdftops) exited with no errors.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] prnt/hpijs/hpijs.cpp 650: WARNING: color pen has low ink
    D [11/Feb/2011:12:44:36 +0100] [Job 24] STATE: +marker-supply-low-warning
    D [11/Feb/2011:12:44:36 +0100] [Job 24] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process 2803 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer return value: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer received signal: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Nie ma takiego pliku ani katalogu (2)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwany potok (32)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: (0)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwane wywołanie systemowe (4)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 9
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 9
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Caught termination signal: Job canceled
    D [11/Feb/2011:12:44:36 +0100] [Job 24]
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Closing foomatic-rip.
    D [11/Feb/2011:12:44:36 +0100] [Job 24] prnt/backend/hp.c 839: ERROR: null print job total=0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] PID 2797 (pstops) crashed on signal 13!
    D [11/Feb/2011:12:44:36 +0100] [Job 24] End of messages
    D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state=3(idle)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state-message="/usr/lib/cups/filter/pdftops failed"
    D [11/Feb/2011:12:44:36 +0100] [Job 24] printer-state-reasons=marker-supply-low-warning
    E [11/Feb/2011:12:45:56 +0100] [Job 22] Stopping unresponsive job!
    E [11/Feb/2011:12:49:41 +0100] [Job 24] Stopping unresponsive job!
    To be honest, it looks more like a Chinese poem rather than error log. I found this part the most disturbing:
    D [11/Feb/2011:12:44:36 +0100] [Job 24] STATE: +marker-supply-low-warning
    D [11/Feb/2011:12:44:36 +0100] [Job 24] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process 2803 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=6..."
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer return value: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] renderer received signal: 1
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Nie ma takiego pliku ani katalogu (2)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwany potok (32)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2801 (KID3) with signal 15
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: (0)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Process dying with "Caught termination signal: Job canceled", exit stat: 0
    D [11/Feb/2011:12:44:36 +0100] [Job 24] error: Przerwane wywołanie systemowe (4)
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Cleaning up ...
    D [11/Feb/2011:12:44:36 +0100] [Job 24] Killing process 2802 (KID4) with signal 15
    Anyone had such problems before? Just don't tell me this cursed device demands a sacrifice from freshly produced virgin paper sheets to chew on.
    Other non-pdf documents print succesfully.

    just got hit with thie same error on my canon printer, and I was told I should try reinstalling the printer (not sure if that's meant for the driver or the actual printer in CUPS, but I intend to try both...

  • I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

    To try to resolve this problem, I have done the following actions.
    1 - I have run Disk Warrior.
    2 - I have repaired permissions.
    3 - I have deleted all plist that are either Cannon or Adobe.
    4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
    I am still unable to print PDF's.
    In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
    In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
    Any help would be greatly appreicated!

    Quit Safari.
    Open the Library folder in your home folder as follows:
    ☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
    ☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
    ~/Library
    Delete the following items from the Library folder:
    Caches/com.apple.Safari/Cache.db
    Preferences/com.apple.quicktime.plugin.preferences.plist
    Preferences/QuickTime Preferences
    Relaunch Safari and test.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • AcquireConnection method call to the connection manager Excel connection Manager failed

    I used VS Studio 2008 (BIDS version 10.50.2500.0) on an WinXp machine (v 5.1.2600 SP3 Build 2600) to create a package that writes multiple query results to different tabbed sheets of a single excel spreadsheet. The package was working just fine and has run
    successfully multiple times, but all of a sudden when opening the project, every single Data Flow task with an Excel Connection Manager displayed error icons. Each raises the following error message when attempting to open the Advanced Editor:
    SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005 Description: "Unspecified error". Error at DataFlow task name: SSIS error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method
    call to the connection manager Excel connection Manager failed with error code 0xC0202009. There may be error messages posted before this with more information on why the Acquire Connection method call failed. Exception from HRESULT: 0Xc020801c (Microsoft.SQlServer.DTSPipelineWrap)
    From the time I created the original package (when it worked fine) until now:
     1) I have been using the same computer, the same login account and the same permissions.
     2) I have been writing to the same (32 bit) 2010 Excel file (which I created) in a folder on my local machine.
     3) The filename and location have not changed; a template file is used each time to move and overwrite the previous file. Both are in the same locations.
     4) I can independently open the target Excel file and the template Excel files with no errors.
     6) The ConnectionString has not changed. The Connnection String I am using is
      Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\Conversion\Conversion\Results_dt01.xlsx;Extended Properties="EXCEL 12.0 XML;HDR=YES;".
     7) Run64BitRuntime is set to False.
    8)  Delay Validation is set to true
    9) This is not running under a SQL job  
    10) There are no child packages being run
    I CAN create a NEW Excel Connection Manager, assigning it the exact same target Excel spreadsheet, successfully, but when I attempt to assign it to the Data Flow destination this error occurs:
    "Test connection failed because of an error in initializing provider. Unspecified error."
    Thinking that the driver might be corrupt, I opened a second SSIS package, which also uses the Excel Connection Manager (same driver) and this package continues to work fine on the same workstation with no errors.
    I have searched online for causes of this error for many hours and found nothing that helps me to solve this issue.
    Does anyone have any suggestions for me?

    Yes, I have verified that the Excel file is not in use or opened by anyone, including me. It has been two months since I opened this particular package, although I have been working with other packages in this project. I just discovered that another
    package in the same project has the same problem - all Data Flows that output to an Excel Destination now have the same error icons. This second packages outputs to an entirely different Excel file than in the first package.  A summay:
    Package #1 has error on every Excel Destination and uses templateA to overwrite fileA and then writes to fileA
    Package #2 has error on every Excel Desintation and uses templateB to overwrite fileB and then writes to fileB
    Package #3 has no error on any Excel Destination and is linked to multiple files (none are A or B)
    Package #1 and #2 are in the same project, but Package #3 is in a separate project .
    I will try replacing the Excel files with new ones for Package 1 and 2.

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Operations manager failed to run a wmi query for wmi events (0x800706ba)

    Hi everyone,
    I've been working on this issue for a while and I am still no closer to finding out what the problem is.  If anybody can offer any other advice or things to check, I'm all ears.
    I'm running SCOM 2012 R2 with UR2, and the Cluster Management Pack v6.0.7063.0
    My problem is on one particular batch of cluster servers where I am getting the following error.
    Name: Operations Manager failed to run a WMI query for WMI events
    Alert Description:
    Module was unable to enumerate the WMI data
    Error: 0x800706ba
    Details: The RPC server is unavailable
    Workflow name: Microsoft.Windows.Cluster.Node.StateMonitoring
    Instance Name: servername.domain.local
    Instance ID: {instance_id}
    Management group: SCOM_Management_Grp_Name
    I am getting this alert regardless of whether I run the Windows Cluster Action Account as Local System, or as a domain user with full local admin privileges on all the cluster nodes.
    When looking at the management pack and the workflow in particular (Microsoft.Windows.Cluster.Node.StateMonitoring), I can see that it's trying to access
    MSCluster_Node in the root\MSCLUSTER WMI namespace.
    This is the workflow for your information...
    <UnitMonitor> ID="Microsoft.Windows.Cluster.Node.StateMonitoring" Accessibility="Public" Enabled="onEssentialMonitoring" Target="ClusLibrary!Microsoft.Windows.Cluster.Node" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="ClusLibrary!Microsoft.Windows.Cluster.CheckState" ConfirmDelivery="false">
    <Category>AvailabilityHealth</Category>
    <AlertSettings AlertMessage="Microsoft.Windows.Cluster.Node.StateMonitoring.AlertMessage">
    <AlertOnState>Warning</AlertOnState>
    <AutoResolve>true</AutoResolve>
    <AlertPriority>Normal</AlertPriority>
    <AlertSeverity>MatchMonitorHealth</AlertSeverity>
    <AlertParameters>
    <AlertParameter1>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</AlertParameter1>
    <AlertParameter2>$Target/Property[Type="ClusLibrary!Microsoft.Windows.Cluster.Node"]/ClusterName$</AlertParameter2>
    </AlertParameters>
    </AlertSettings>
    <OperationalStates>
    <OperationalState ID="Success" MonitorTypeStateID="Online" HealthState="Success" />
    <OperationalState ID="Warning" MonitorTypeStateID="Partial" HealthState="Warning" />
    <OperationalState ID="Error" MonitorTypeStateID="NotOnline" HealthState="Error" />
    </OperationalStates>
    <Configuration>
    <ClusterObjectName>$Target/Property[Type='ClusLibrary!Microsoft.Windows.Cluster.Node']/NodeName$</ClusterObjectName>
    <PollInterval>60</PollInterval>
    <ClusterObjectClass>MSCLUSTER_Node</ClusterObjectClass>
    <OnlineExpression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">0</Value>
    </ValueExpression>
    </SimpleExpression>
    </OnlineExpression>
    <OnlineExpressionOnDemand>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">0</Value>
    </ValueExpression>
    </SimpleExpression>
    </OnlineExpressionOnDemand>
    <PartialExpression>
    <Or>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">2</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">3</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </Or>
    </PartialExpression>
    <PartialExpressionOnDemand>
    <Or>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">2</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value Type="String">3</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </Or>
    </PartialExpressionOnDemand>
    <NotOnlineExpression>
    <And>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">0</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">2</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">3</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </And>
    </NotOnlineExpression>
    <NotOnlineExpressionOnDemand>
    <And>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">0</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">2</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <XPathQuery Type="String">Property[@Name='State']</XPathQuery>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value Type="String">3</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </And>
    </NotOnlineExpressionOnDemand>
    <WMIFields>Name, State</WMIFields>
    </Configuration>
    </UnitMonitor>
    I can confirm that I am able to browse the MSCluster_Node class locally, as well as remotely using WMIEXPLORER and WBEMTEST,
    however it only works when I set the Authentication Level to
    Packet Privacy.  If I do not select Packet Privacy, a WMI event log error 5605 is logged on the remote servers application log that says...
    The root\mscluster namespace is marked with the RequiresEncryption flag.  Access to this namespace might be denied if the script or application does not have the appropriate authentication level.  Change the authentication level to Pkt_Privacy
    and run the script or application again.
    I can confirm that all firewalls are turned off, and there are no firewalls between the management servers and the agents in question.  AV exclusions have been done and appear to be in place.  The nodes are all Windows 2008 R2 with SP1.  As
    far as I can tell there is plenty of memory available on each of the nodes in question (50%+) of RAM is available. 
    If I manually run the "Discover the Windows Server 2008 R2 Cluster Components" task in the Cluster Service State section of the management pack in the Monitoring Pane in the console, on the nodes in question - the discovery runs successfully.
    Does anybody have any other ideas or suggestions I could try?
    Many thanks in advance,
    Noel.
    http://www.dreamension.net

    Hi,
    Common causes of RPC errors include:
    Errors resolving a DNS or NetBIOS name.
    The RPC service or related services may not be running.
    Problems with network connectivity.
    File and printer sharing is not enabled.
    For more information, please review the link below:
    Windows Server Troubleshooting: "The RPC server is unavailable"
    http://social.technet.microsoft.com/wiki/contents/articles/4494.windows-server-troubleshooting-the-rpc-server-is-unavailable.aspx#Identify
    Troubleshooting RPC Errors
    http://technet.microsoft.com/en-us/magazine/2007.07.howitworks.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Dreaded "Operations Manager failed to start a process" error (2012 R2)

    I know this error has been covered many times, and on many topics, but this time mine is slightly different.   It's
    NOT the
    "SCOMpercentageCPUTimeCounter" error covered by Kevin Holman.
    Also, I am running SCOM 2012 R2 UR4 (7.1.10226.1046) and everything seems correctly patched (MS and agents), like
    suggested by Nicole Welch and Kevin Holman as well.
    So my environment is a fresh installation of SCOM 2012 R2, and I am transferring to this new Management Group, the monitored servers from our old SCOM 2012 "R1" (which I did not upgrade but rather made a brand new independent install).  So
    all servers aren't migrated yet, but I would like to solve this error before. This error did NOT happen in "R1", nor was it overridden (I imported the exact same Management Packs anyway).
    On 2012 R2, it happens on almost all new monitored machines, mainly Read-Only Domain Controllers (RODCs).
    Here is the kind of alert text I am getting:
    Het om 10:10:15 gestarte proces is beëindigd als gevolg van een uitvoerverzamelfout als gevolg van fout 0x80070057 :
    The parameter is incorrect.
    ; mogelijk zijn er gegevens verloren gegaan.
    Opdracht die is uitgevoerd: "C:\Windows\system32\cscript.exe" //nologo "C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 193\24788\AD_Global_Catalog_Search_Response.vbs"
    RODC02.mydomain.be (objectCategory=DMD) false 4 {9E253FCB-8AAF-491F-CCA3-E632C6C2800C}
    Werkmap: C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 193\24788\
    Dit is van invloed op een of meer werkstromen.
    Werkstroomnaam: Microsoft.Windows.Server.2008.AD.DomainController.GCSearchTime.Monitor
    Exemplaarnaam: RODC02
    Our servers have Belgian (Dutch) regional settings, hence the language. But check out the highlighted info in bold.
    The related event Number (in Alert Context) is 21404. Most other articles about this, mention 21402 or 21403. I suppose they all must be related but still, it's a new one here.
    There you have the failing VBS file. I checked all alerts and there seem to be different files concerned overall. Other examples:
    C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 233\22737\AD_Database_and_Log.vbs    (from almost all RODCs)
    C:\Program Files\Microsoft Monitoring Agent\Agent\Health Service State\Monitoring Host Temporary Files 196\19876\Microsoft.Windows.Server.Legacy.FreeSpace.vbs
      (also from an RODC)
    C:\Program Files\Microsoft System Center 2012 R2\Operations Manager\Server\Health Service State\Monitoring Host Temporary Files 5891\338282\Microsoft.Windows.Server.CPUUtilization.Monitortype.vbs 95 15
    SCOM02.mydomain.be 1.4119384288787842     (this one is from my second Management Server..)
    Repeat count of the alert is 1 to 2 a day, so it's not nightmareish, but still, requires to be fixed. I suspect that even if there is a different VBS file concerned, since the eventID and the alert text are the same, the repeat count will just increase,
    not showing the last actual VBS concerned.
    I connect to each of these servers, and browse to the directory containing the file, and the folder is there, the file is there.  The error text mentions incorrect parameters but they still seem OK to me. 
    I found something which might be worth noting:  when browsing to the directory, be it on an RODC or on the SCOM server, I get a permission popup requiring some admin rights to do so - although I am using my domain admin (+SCOM+SQL+local
    admin everywhere) account:
    SCOM services use the Local System account to run, on every machine. I thought Local System shouldn't be concerned with these permissions popups, but normally the domain/local admins aren't either, yet I am.
    The "Health service" folder is the only one from the "C:\Program Files\Microsoft Monitoring Agent\Agent" folder to be concerned with this; I can browse without trouble to any other directory there.
    After a SCOM service stop, I renamed the "Health Service state" folder (as you can see on the screenshot, there is a "Health Service State bak" folder) and let the service recreate it after a restart, to ensure it was clean and with
    appropriate permissions , but it doesn't help.
    Might that be a clue?
    Or else what?  I'm getting confused and don't find a suitable solution.
    dd
    Bix

    On Thu, 4 Dec 2014 14:20:22 +0000, Bixessss wrote:
    I know this error has been covered many times, and on many topics, but this time mine is slightly different.   It's*NOT* the "SCOMpercentageCPUTimeCounter" error covered by Kevin Holman <http://blogs.technet.com/b/kevinholman/archive/2010/02/23/a-new-script-error-scompercentagecputimecounter-vbs-invalid-class.aspx>.
    Also, I am running *SCOM 2012 R2 UR4* (7.1.10226.1046) and everything seems correctly patched (MS and agents), likesuggested by Nicole Welch <http://nicolewelchscom.wordpress.com/2013/10/01/operations-manager-failed-to-start-a-process/>
    and Kevin Holman as well.
    This forum is for security issues related to Windows Server and not for
    System Center questions.
    Post your question in one of the following forums:
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
    Thanks.
    Paul Adare - FIM CM MVP
    Never trust a computer you can't lift. - Stan Masor

Maybe you are looking for