Filter on storage location in ME55

Hello,
Our scenario is that we have to release PR after having select them by the notion of plant and storage location, but we have some difficulties to do it because we can't filter on the zone "Storage location".
The transaction ME55 does not allow us to select the number of store in the criteria of selection.
Either, with ME55, we can choose a display ALV which allows us to filter the result on the storage location, but then it is not possible to make a collective release of the purchase requisitions; is there any parameter setting to manage the possibility to select à list of Pourchase requisition filtered on a list ALV and release them.
Either manage the zone ' storage location " in the selection screen, Can you tell me if you know wich user exit ou badi I can use to manage this?
Thank you for your help.
Edited by: fat on Sep 29, 2010 12:26 PM

Hi,
we have only the following enhancements avaialble for ME55. You can not go by storage locations.
M06B0001
Role determination for release of requisitions
M06B0001
Changes to communication structure for release of requisitions
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to communication structure for overall release of purchase requisitions
M06E0004
Changes to communication structure for release of purchasing document
M06E0005
Role determination for release of purchasing documents
Thanks,
Venkat

Similar Messages

MD04 - filter out storage location or sales order stock

Hello,
we are using sales order stock in a specific storage location. Is it possible to filter it out of the stock/requirements-list (MD04). I saw filters in customizing but don't know what to select.
thanks

Hi David,
For the Transaction MD04 if SAP provides the Screen Exit this can be done.
Please check with your ABAPER wheather for this Transaction any Screen Exit is Existed
or not.If Existed we can do this if not cant do this.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

Exclude storage location during batch determination

Dear SAP Gurus,
My client senario is PP-PI. We are using batch determination in process order. Suppose my raw material is 'A'. It is present in ST1-100 qty, ST2-200 qty and ST3-150 qty. Now during batch determination i want to consider only ST1 and ST2 in determination and don't want to include ST3 in determination. But during determination system consider all 3 locations. So how can i exclude ST3 from batch determination.
What things i have to do for this. Please help me out.
Thanks and Regards,
Harish Gunjatay.

Hi,
Sol 1:
U can create Storage location as one Characteristic and while determining the batch, you can play with this characeteristic. Just this logic strikes my mind. See the posibility. And by "Reference Characteristic" concept if u can establish automatic updation of this characteristic, it will be superb.
Sol 2:
In Bactch Information Cockpit I think u can filter the storage location out. Try this also.
Kiran.

MD04 - Display the stock on one storage location particulary.

The transaction MD04 allows seeing the stock of the plant in the first line of the Stock/requirement list.(MD04)
When the plant includes several storage location (e.g MAG1, MAG2, MAG3), we don't have the detail of the quantity one each storage location.
We can use the filter (by using SETTINGS and FILTER ON) that controls the display of the MRP list and the stock/requirements list but this function don't allows seeing only the stock on one storage location particulary. We have to go the tcode MMBE in order to know the stock on each storage location.
Thanks in advance for yours reply.

What is your real problem?
Display the stock storage location-wise is one thing and do MRP without certain storage location(s) (=exclude storage locations from MRP) might be another.
If you only want to display stock of certain storage locations in MD04 but use all you stock for planning, I think there's no reason for it.
If you really want to exclude certain storage locations, then you have to be aware that MRP won't consider that stock (for the plant segment). It will also have impact on ATP (atp won't use that stock too).
So, there's a big difference between exclude a storage location from MRP and to exclude its stock from display.
(You can exclude storage locations from MRP via material master --> MRP4 view --> you have to enter both plant/sloc as organisational level and you will see the suitable tab. It is also possible to control this indicator via config for to be created material masters - you can search and find threads)
You should describe your exact requirement and maybe forum mebers can give you advice.

Stock report based on stock type with a storage location

Is there a standard SAP report that will give me the stock information based on the storage location and stock type (unrestricted, QI, blocked, etc?)...for instance if I want to find all QI stock in a certain plant/storage location? I want it to show a list of materials and their quantities, not on an individual basis as in MMBE.
Thanks!

Thanks again for your response. I've used your last mentioned method before but with MMBE you have to enter a material number. We want a report of all materials in a particular stock type.
I was able to achieve this by goign to MB52 and setting up a filter on a layout. My users can now select that filter on the selection screen to get the desired result.
Thanks again for you attempts to help!

MC44 configuration for 'storage location exclusion'

Hi all,
I want to know if it is possible to exclude a certain storage location (1006 in my case) from the MC44 u2013 Inventory Turnover report.
By default i can filter results by several parameters like ABC indicator or material type, but i want to exclude all materials in a storage location. Can i configure it to do so?
http://www.kowboyz.nl/blog/wp-content/uploads/2009/07/MC44.png
Many thanks,

this cannot be solved thru customizing.
you have to create Z-report

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Date Wise and Storage Location Wise Stock Qty & Value Report......

Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
Yusuf

Hi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK

Stock on posting date -storage location and batch wise

Dear All
I need to developa report exactly same as MB5B but with storage location and batch wise.
We need storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
I have gone through some history tables like MCHBH and MBEWH.
But all the history tables are having fileds for period wise but not date wise.
Any focus on this?

You have to read the coding of MB5B to see how SAP is doing it.
The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

Storage location wise Opening/Closing Stock on posting date (mb5b)

Hi,
Report mb5b gives opening stock and closing stock as on date. In the selection screen, if we do not enter specific storage location then the opening/closing stock is displayed as sum of all storage location stocks for a given material.
Where as if we enter storage location, it gives storage location specific output. (with Storage loc/batch stock radio button)
My requirement is - without entering storage location in the initial screen, the system should display storage location specific opening/closing stock.
To get this, presently I need to execute mb5b transaction individually for every storage location.
Warm regards,
MS

Hi Madhavi
This report you can have in T code MC.6 and another t code for opening and closing stock in t code MC.9
Regards
Vivek
-- Reward if helpful
Edited by: Supergene on Feb 28, 2008 3:17 PM

Opening and closing Stock report at Storage location level- date wise

Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
Sam

Do I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam

MC.9 drill down at storage location level

In mc.9 report stock against plant xxxx at storage location drilldown
I see
In total valuated stock is 0
But
at storage location 0040 I see 423.686 as valuated stock
and at storage location 5M06 I see minus 423.686 as valuated stock
Client need to have not stock at plant level.
In total I see 0
But client is bothering about valuate stock he is getting at storage location level.
Thanks,
Kiran

Hi Jurgen,
For plant xxxx there is nil stock in mc.9 report. only I see sloc to sloc transfer of qty. for example sloc 0001 has qty + 100 & sloc 0002 has qty -100.
Finance is asking to user that this + - qty should not show in mc.9 and asking him to get it removed.
What should I suggest to user and finance.
Thanks,
Kiran

Filter on storage location in ME55

Similar Messages

Maybe you are looking for