Filter operators when passing presentaion varibles takes as "equal"operator

Hi experts,
Please help me,...
my requirement is to display two reports using one prompt
1.. one report should display based on the prompt selection and the
2..second report should display excluding the prompt selection .
so, i created a prompt with the Quarter, Product, market and created the presentation variables for them and used them in second report (please find the img : https://picasaweb.google.com/obieegraphs/Prompts#5567705759580587890 )
i created the first report as a normal report by prompting the prompt values using the operator "is prompted".(please find the figure : https://picasaweb.google.com/obieegraphs/Prompts#5567708538685990114 )
in the second report i created the report as normal and passed the presentation variables with the filters using "is not equal to/ is not in" operator ( Please see here: https://picasaweb.google.com/obieegraphs/Prompts#5567712256152631874 )
when i put all together in the dashboard the first report displays fine and the second report displays based on the "is equal to/is in" operator, where as it should have been displayed based on the operator "is not equal/ is not in".
the report is displaying based on the "is equla to/is in" operator irrespective of what operator have been used in the filter.
Could some one help me out on this?
Thanks in advance,

Hi Srikanth,
could you please explain little more detail? how to do that using the same prompt with guided navigation?
when i use the guided navigation we can display only one report at once, but i need to display both of the reports at the same time using the same prompt.
any ideas?
thanks in advance....
Edited by: Maniswar on 30-Jan-2011 11:31

Similar Messages

Script fails when passing values from pl/sql to unix variable

Script fails when passing values from pl/sql to unix variable
Dear All,
I am Automating STATSPACK reporting by modifying the sprepins.sql script.
Using DBMS_JOB I take the snap of the database and at the end of the day the cron job creates the statspack report and emails it to me.
I am storing the snapshot ids in the database and when running the report picking up the recent ids(begin snap and end snap).
From the sprepins.sql script
variable bid number;
variable eid number;
begin
select begin_snap into :bid from db_snap;
select end_snap into :eid from db_snap;
end;
This fails with the following error:
DB Name DB Id Instance Inst Num Release Cluster Host
RDMDEVL 3576140228 RDMDEVL 1 9.2.0.4.0 NO ibm-rdm
:ela := ;
ERROR at line 4:
ORA-06550: line 4, column 17:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ";" to continue.
ORA-06550: line 6, column 16:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev su
But when I change the select statements below the report runs successfully.
variable bid number;
variable eid number;
begin
select '46' into :bid from db_snap;
select '47' into :eid from db_snap;
end;
Even changing the select statements to:
select TO_CHAR(begin_snap) into :bid from db_snap;
select TO_CHAR(end_snap) into :eid from db_snap;
Does not help.
Please Help.
TIA,
Nischal

Hi,
could it be the begin_ and end_ Colums of your query?
Seems SQL*PLUS hs parsing problems?
try to fetch another column from that table
and see if the error raises again.
Karl

Database, Dataset, Table Adaptors Error "Unable to load, Update requires a valid DeleteCommand when passed DataRow collection with deleted row"

Microsoft Visual Basic 2010 Express.
I am new to Visual Basic programing and i am trying to understand the relationships between Datasets, database, table Adaptors. I have to following code that is is giving me the following error" Unable to load, Update requires a valid DeleteCommand
when passed DataRow collection with deleted rows".
I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
It seems that i can delete the data on the DataGridView Table and it only displays the correct data. but my database is not updating, even though the data grid displays differently.I can determine this because, when i save the offset database, i have all
the previous uploads and all the rows that i wanted to delete are still there.
My final goal is to be able to import offset data from a CSV file, save this data on the pc, send a copy of this data to a NuermicUpDown so the customer can modify certain numbers. From here they download all the date to a controller. IF the customer
needs to modify the imported data, they can go to a tab with a data grid view and modify the table. They will also have to option to save the modified data into a csv file.
Im not sure if i am making this overcomplicated or if there is a easier way to program this.
CODE:
Private Function LoadOffSetData()
        Dim LoadOffsetDialog As New OpenFileDialog 'create a new open file dialog and setup its parameters
        LoadOffsetDialog.DefaultExt = "csv"
        LoadOffsetDialog.Filter = "csv|*.csv"
        LoadOffsetDialog.Title = "Load Offset Data"
        LoadOffsetDialog.FileName = "RollCoaterOffset.csv"
        If LoadOffsetDialog.ShowDialog() = Windows.Forms.DialogResult.OK Then 'show the dialog and if the result is ok then
            Try
                Dim myStream As New System.IO.StreamReader(LoadOffsetDialog.OpenFile) 'try to open the file with a stream reader
                If (myStream IsNot Nothing) Then 'if the file is valid
                    For Each oldRow As MaterionOffsetDataSet.OffsetTableRow In MaterionOffsetDataSet.OffsetTable.Rows
                        oldRow.Delete()
'delete all of the existing rows
                    Next
                    'OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
                    Dim rowvalue As String
                    Dim cellvalue(25) As String
                    'Reading CSV file content
                    While myStream.Peek() <> -1
                        Dim NRow As MaterionOffsetDataSet.OffsetTableRow
                        rowvalue = myStream.ReadLine()
                        cellvalue = rowvalue.Split(","c) 'check what is ur separator
                        NRow = MaterionOffsetDataSet.OffsetTable.Rows.Add(cellvalue)
                        Me.OffsetTableTableAdapter.Update(NRow)
                    End While
                    Me.OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
                    MainOffset.Value = OffsetTableTableAdapter.MainOffsetValue          'saves all the table offsets
to the offset numericUpDown registers in the main window
                    StationOffset01.Value = OffsetTableTableAdapter.Station01Value
                    StationOffset02.Value = OffsetTableTableAdapter.Station02Value
                   myStream.Close() 'close the stream
                    Return True
                Else 'if we were not able to open the file then
                    MsgBox("Unable to load, check file name and location") 'let the operator know that the file wasn't able to open
                    Return False
                End If
            Catch ex As Exception
                MsgBox("Unable to load, " + ex.Message)
                Return False
            End Try
        Else
            Return False
        End If
    End Function

Hello SaulMTZ,
>>I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
This error usually shows that you do not initialize the
DeleteCommand object, you could check this
article to see if you get a workaround.
>> Im not sure if i am making this overcomplicated or if there is a easier way to program this.
If you are working CSV file, you could use OleDB to read it which would treat the CSV file as a Table:
http://www.codeproject.com/Articles/27802/Using-OleDb-to-Import-Text-Files-tab-CSV-custom
which seems to be easier (in my opinion).
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Trouble passing a varible to INSERT page

I'm a novice and I'm having trouble passing a varible from
one page into the database.
I ultimately want to pass the word "Appliances" into the
database field name called CATEGORY.
The user clicks on: www.xyz.com/main.cfm?category=Appliances
to go to the next page. Then the next page has a <form> in it
and that same page has <CFSET category=#category#>. But when
the form posts the info into the database with the <CFINSERT>
on the next page, CATEGORY is empty.
I've tried: CFSET form.category=#category#>, CFSET
form.category="#category#"> and some other things. I've even
thought of doing this: <FORM
ACTION="insert.cfm?category=#category#" method="post">, but that
didn't work either (I thought I was pretty smart when I thought of
that). :-)
Now, I have JUST learned that I can use the <INPUT
TYPE="hidden" NAME="category" VALUE="#category#"> to pass it BUT
why didnt a simple CFSET statement set the variable and pass it to
the CFINSERT?
Thanks in advance!! -Tony

yes, <cfinsert> tag only inserts FORM values, that is
values defined in
the FORM scope variables (form fields, effectively). it will
not insert
any values defined in any other scopes.
a form will POST (submit) only data in its fields. that is
why the
variable you set with CFSET is not submitted - it is not a
form field.
so in order to use cfinsert you must have all data you want
to insert
into db in form fields. as you have found out, you can have
hidden form
fields to post/submit data too.
you could also pass the variable as part of the query string
of the
action page: <form
action="youractionpage.cfm?yourvar=<cfoutput>#yourvar#</cfoutput>"
method="post">, but that variable will be available on the
action page
inside URL scope, not FORM scope. in order for CFINSERT to
insert that
variable in this case, just add <cfset form.yourvar =
url.yourvar>
BEFORE your CFINSERT tag on your action page.
et voila - your variable is part of the form scope now and
gets inserted
with cfinsert tag.
hope this helps.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

How to skip the spaces, ' etc when passing the parameter to srw.run_report?

Hi, I have got problem with passing parameter to srw.run_report. It seems it doesn't take the special symbols such as space, ', etc.. the statement is like:
srw.run_report('report=test1 p_name='| |:p_title);
if :p_title is "JOE", there is no problem to pass it, but if the :p_title is "JOE LI", then the value of the parameter can be passed to p_name.
Does any one know how to skip those special symbols in the string when passing it to srw.run_report. Thank you very much.
Joe

Hi,
Try this :
srw.run_report('report=test1 p_name='| |
chr(34)| |:p_title| |chr(34)
);

Interactive Reports: filter operators restriction

Hi,
I was wondering if the list of filter operators offered by the IR could be easily restricted, for example I can see scenarions when we do not want users to use operators like "contains", "like"...
Many thanks

Any comments would be very much appreciated.
Many thanks

What can I do when my iphone 4 take too long to restore? It only has 1 song on it

What can I do when my iphone 4 take too long to restore? It only has 1 song on it and 1 additional app beside the standard apps.
The circle in the middle of the phone has been spinning from after 4 yesterday afternoon until now. Please help me

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Problem with empty report parameters when passed to PL/SQL function

Hi,
We have come across what appears to be a bug in the JRC. When passing a report parameter to a PL/SQL function as a parameter, empty parameters are changed before being sent to the function. More specifically, an empty string "" ends up as the value "(')" in the PL/SQL function parameter. In our report we print the report parameters on the first page so we know that the parameters are OK before being passed to the database.
The problem exists for version 12.2.203, 12.2.204 and 12.2.205 of the JRC.
We have identified a workaround, but it is not exactly elegant: Before executing the report we modify all empty parameters ("") to " " . In the PL/SQL function, we trim all parameters before using them.
We call the function using a command object with a sql syntax like this example:
select * from table (qa_batch_release.get_qa_br('{?p_report_id}','{?p_reg_set_number}','{?p_cr_number}','{?p_change_id_decode}','{?p_country_id}','{?p_mfg_item_no}','{?p_4_no}','{?p_5_no}','{?p_7_no}'))
The PL/SQL function is a table returning function.
Best regards, Thor

Hi Kishore,
using #COLUMN_VALUE# would probably not make much sense, because normally a report has multiple columns and not just the numeric column which you want to verify if it's negative. But APEX will fire the template condition for each column, because the report template is a column cell template.
What you can do to make it more generic is to use for example
#CHECK_AMOUNT#
in the template and provide a not displayed column in your SQL statement which contains your value which is named CHECK_AMOUNT. For example:
SELECT NAME
, BALANCE
, BALANCE AS CHECK_AMOUNT
FROM XXX;Because this CHECK_AMOUNT column would be a generic name, you can use this template in all your reports as long as you provide this column.
Thope that helps
Patrick

When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

I'm sure you have checked, but make sure your mute button on the keyboard is not on , also check that you haven't touched the space bar during a call as that mutes it.
Check your settings in Skype>Preferences, Audio/Video tab. Here's what mine look like:

Using logical operators when creating software groups

Is there a way to use simple logical operators when using filters for creating software groups?
An example of what I want to do is to select all updates for the past month - but not include Definition Updates for instance. So all update classifications but NOT definition updates.

The '-' trick only works for ADRs to my knowledge.
For searching within the console, anytime you add criteria for the same attribute, it always adds it with an OR. This is a known design shortfall.
For your question specifically though, you need to reverse your thinking and instead of being exclusive, think inclusively. Thus, you can add an attribute multiple times to the search criteria by selecting and adding it multiple times -- once for each
classification that's not definition updates. Then, save the search as pointed out by Torsten.
Jason | http://blog.configmgrftw.com

How to hide some column filter operators in Interactive Report

Hi,
I have an APEX 4.2 application what includes Interactive Report page.
Is there possibilty to hide or disable some filter operators in column filter?
But I don't want to disable all filter functionality for end users.
For example how to hide/disable operator "matches regular expression".
Some filter operators are too complicated for end users.
I have searhced but not found solution.
regards,
Erkki

erkkik wrote:
I have an APEX 4.2 application what includes Interactive Report page.
Is there possibilty to hide or disable some filter operators in column filter?
But I don't want to disable all filter functionality for end users.
For example how to hide/disable operator "matches regular expression".
Some filter operators are too complicated for end users.
I wouldn't really recommend this. Users will quickly recognise what works for them and avoid options that they do not currently understand. However, over time—through training or advice from more experienced users—they may come to understand and use all of the available features. Blocking access (especially in a non-standard way) to options that users may eventually need is likely to result in unnecessary development work now and at some (possibly inconvenient) time in the future.
That said, this really isn't difficult to implement using CSS. Use your browser web inspector to identify which filter types are to be blocked, using the value attribute of the filter Operator select list in the generated IR HTML. For example, in APEX 5.0 a filter operator select list looks like:
<select id="R70597672218719366505_STRING_OPT" class="a-IRR-operator" data-column-type="STRING" title="Operator" name="p_ignore_10" size="1">
<option value="=">=</option>
<option value="!=">!=</option>
<option value="is null">is null</option>
<option value="is not null">is not null</option>
<option value="like">like</option>
<option value="not like">not like</option>
<option value="in">in</option>
<option value="not in">not in</option>
<option value="contains">contains</option>
<option value="does not contain">does not contain</option>
<option value="regexp_like">matches regular expression</option>
</select>
The "matches regular expression" option has the value regexp_like, so the required CSS rule using the IR operator select list class and an attribute selector on the option value is:
.a-IRR-operator option[value="regexp_like"] {
display: none;
Additional selectors for other filter types can be added to this rule as required, for example:
.a-IRR-operator option[value="regexp_like"],
.a-IRR-operator option[value="is not null"] {
display: none;
to eliminate the "is not null" filter.
To implement this for all IRs in your application, create a custom CSS style sheet containing the rule, upload it to your workspace, and reference it in all of the page templates used for IR pages.
This is not a 100% foolproof solution. CSS is not an appropriate way to implement security restrictions. A web-savvy user could use their web inspector to disable the CSS rule and access the blocked filter(s). However there is little risk here as (1) it appears that your users will lack the required expertise; and (2) doing so will only allow them to further filter data they already have access to.

Sub Query Error When Passing Dynamic Parameter.

Dear All, I need help for below query problem.
I have try below query run no problem when pass a static Parameter into the query but it throw error once i have add in the dynamic parameter:-
--Sales BatchNum Transaction
SELECT T0.[ItemCode], T0.[ItemName], T0.[WhsCode], T0.[BatchNum], ISNULL(T4.[AvgPrice],0) AS 'Avg Price', SUM(T0.[Quantity]) AS 'Sales Quantity',
(SELECT [Quantity] FROM [OIBT] T1 WHERE T1.[ItemCode] = T0.[ItemCode] AND T1.[WhsCode] = T0.[WhsCode] AND T1.[BatchNum]=T0.[BatchNum]) AS 'Stock OnHand'
FROM [IBT1] T0 INNER JOIN [OITM] T2 ON T0.[ItemCode] = T2.[ItemCode]
                  INNER JOIN [OITB] T3 ON T2.[ItmsGrpCod] = T3.[ItmsGrpCod]
                  INNER JOIN [OITW] T4 ON T0.[ItemCode] = T4.[ItemCode] AND T0.[WhsCode] = T4.[WhsCode]
WHERE T0.[BaseType] = [%0] AND T0.[DocDate] BETWEEN [%1] AND [%2] AND T3.[ItmsGrpNam] = [%3]
GROUP BY T0.[ItemCode], T0.[ItemName], T0.[WhsCode], T0.[BatchNum], T4.[AvgPrice]
--ORDER BY T0.[ItemCode]
UNION ALL
--No Sales Batch Transaction
SELECT T4.[ItemCode], T4.[ItemName],T4.[WhsCode], T4.[BatchNum], ISNULL(T7.[AvgPrice],0) AS 'Avg Price', 0 AS 'Sales Quantity' ,SUM(T4.[Quantity])
FROM [OIBT] T4 INNER JOIN [OITM] T5 ON T4.[ItemCode] = T5.[ItemCode]
                  INNER JOIN [OITB] T6 ON T5.[ItmsGrpCod] = T6.[ItmsGrpCod]
                  INNER JOIN [OITW] T7 ON T4.[ItemCode] = T7.[ItemCode] AND T4.[WhsCode] = T7.[WhsCode]
WHERE NOT EXISTS
( SELECT T0.[ItemCode], T0.[ItemName], T0.[WhsCode], T0.[BatchNum], ISNULL(T5.[AvgPrice],0) AS 'Avg Price', SUM(T0.[Quantity]) AS 'Sales Quantity'
FROM [IBT1] T0 INNER JOIN [OITM] T2 ON T0.[ItemCode] = T2.[ItemCode]
                    INNER JOIN [OITB] T3 ON T2.[ItmsGrpCod] = T3.[ItmsGrpCod]
                     INNER JOIN [OITW] T5 ON T0.[ItemCode] = T5.[ItemCode] AND T0.[WhsCode] = T5.[WhsCode]
WHERE T0.[BaseType] = [%1] AND T0.[DocDate] BETWEEN [%1] AND [%2] AND T4.[ItemCode]=T0.[ItemCode] AND T4.[WhsCode]=T0.[WhsCode] AND T4.[BatchNum]=t0.[BatchNum] AND T3.[ItmsGrpNam] = [%3]
GROUP BY T0.[ItemCode], T0.[ItemName], T0.[WhsCode], T0.[BatchNum],T5.[AvgPrice]
AND T6.[ItmsGrpNam] = [%3]
GROUP BY T4.[ItemCode], T4.[ItemName], T4.[WhsCode], T4.[BatchNum], T7.[AvgPrice]
HAVING SUM(T4.[Quantity]) > 0
ORDER BY 1, 2, 3, 5 DESC
I think SAP Query Manager can support the sub-query, kindly advise how to solve or other alternative way to solve this issue.
Thanks a lot.

Dear Thanga Raj K,
From your solution i can get my expected result, only within your solution you miss out the @ in line 32 for ToDate variable.
After i have added it, it working perfectly.
Thanks once again.
For other user References code(Corrected):-
Declare @basetype as int
Declare @FromDate as Datetime
Declare @ToDate as Datetime
Declare @ItemGroup as nvarchar(30)
set @basetype = (select max(s0.BaseType) from IBT1 S0 where s0.BaseType = '[%0]')
set @FromDate = (select min(S1.DocDate) from IBT1 S1 where S1.DocDate >= '[%1]')
set @ToDate = (select max(S2.DocDate) from IBT1 S2 where S2.DocDate <= '[%2]')
set @ItemGroup = (select max(S3.ItmsGrpNam) from OITB s3 where S3.ItmsGrpNam = '[%3]')
--Sales BatchNum Transaction
SELECT T0.ItemCode, T0.ItemName, T0.WhsCode, T0.BatchNum, ISNULL(T4.AvgPrice,0) AS 'Avg Price', SUM(T0.Quantity) AS 'Sales Quantity',
(SELECT Quantity FROM OIBT T1 WHERE T1.ItemCode = T0.ItemCode AND T1.WhsCode = T0.WhsCode AND T1.BatchNum=T0.BatchNum) AS 'Stock OnHand'
FROM IBT1 T0 INNER JOIN OITM T2 ON T0.ItemCode = T2.ItemCode
INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod
INNER JOIN OITW T4 ON T0.ItemCode = T4.ItemCode AND T0.WhsCode = T4.WhsCode
WHERE T0.BaseType = @basetype AND T0.DocDate BETWEEN @FromDate AND @ToDate AND T3.ItmsGrpNam = @ItemGroup
GROUP BY T0.ItemCode, T0.ItemName, T0.WhsCode, T0.BatchNum, T4.AvgPrice
--ORDER BY T0.ItemCode
UNION ALL
--No Sales Batch Transaction
SELECT T4.ItemCode, T4.ItemName,T4.WhsCode, T4.BatchNum, ISNULL(T7.AvgPrice,0) AS 'Avg Price', 0 AS 'Sales Quantity' ,SUM(T4.Quantity)
FROM OIBT T4 INNER JOIN OITM T5 ON T4.ItemCode = T5.ItemCode
INNER JOIN OITB T6 ON T5.ItmsGrpCod = T6.ItmsGrpCod
INNER JOIN OITW T7 ON T4.ItemCode = T7.ItemCode AND T4.WhsCode = T7.WhsCode
WHERE NOT EXISTS
(SELECT T0.ItemCode, T0.ItemName, T0.WhsCode, T0.BatchNum, ISNULL(T5.AvgPrice,0) AS 'Avg Price', SUM(T0.Quantity) AS 'Sales Quantity'
FROM IBT1 T0 INNER JOIN OITM T2 ON T0.ItemCode = T2.ItemCode
INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod
INNER JOIN OITW T5 ON T0.ItemCode = T5.ItemCode AND T0.WhsCode = T5.WhsCode
WHERE T0.BaseType = @basetype AND T0.DocDate BETWEEN @FromDate AND @ToDate AND T4.ItemCode=T0.ItemCode AND T4.WhsCode=T0.WhsCode AND T4.BatchNum=t0.BatchNum AND T3.ItmsGrpNam = @ItemGroup
GROUP BY T0.ItemCode, T0.ItemName, T0.WhsCode, T0.BatchNum,T5.AvgPrice
AND T6.ItmsGrpNam = @ItemGroup
GROUP BY T4.ItemCode, T4.ItemName, T4.WhsCode, T4.BatchNum, T7.AvgPrice
HAVING SUM(T4.Quantity) > 0
ORDER BY 1, 2, 3, 5 DESC

Error when passing URL from OLAP Universe to WebI

Hi Experts,
I am getting 'The Supplier XML is not valid' WebI error when passing a URL from OLAP Universe.
URL example:
'<a href="http://www.sap.com">web link</a>'
I follow Universe Designer Guide:
- typing above URL into Dimension Select statement
- selecting Read As Hyperlink in Object Format.
When I drop this dimension into Result Objects panel in WebI Query and run refresh 'The Supplier XML is not valid' pops up.
What i am trying to achive is to create a pre-formatted as Hyperlink object (dimension) in WebI to make it available for a user to design ad-hoc reports.
Please help
Thanks

Hi,
Refer the below forum link for more information:
Universe object format in Web Intelligence
I guess you can do some changes in the format of Universe object and use it in Webi.
-Noor.

Error when passing parameters in a link

Hi:
i have a report and a form. i've created a link that will point to the form from the report. So i've associated the link to a field of the report and edited it so that a key field in the form will be equal to a value passed from the report's key field. The fact is that passing static values works properly, but when passing parameters from a column it raises an error:
Error: Unable to parse query (WWV-10200)
ORA-06550: line 1, column 37:
PLS-00201: identifier 'NO' must be declared
ORA-06550: line 1, column 9:
PL/SQL: Statement ignored (WWV-11230)
Failed to parse as PORTAL - begin wwv_rptclip.g_row_object :=
NO(wwv_rptclip.g_row_object) ; end; (WWV-08300)
Does anybody know how to solve this problem? or why is the error raised?
Thx.
Regards. Urko.

Also, is that a function NO you're trying to use? I'm not sure what that is, so it's possible when Portal tries to parse the sql string and execute it, it's not a recognizable function in the Oracle language or the appropriate grants on that function have not been made to the schema executing the report/form

I have a 4s and the camera keeps shutting down when I try to take a picture. What's going on? What is the solution?

I have a 4s and the camera keeps shutting down when I try to take a picture. What's going on? What is the solution?

Delete all data from following location on your machine and try updating again.
Mac OS: ~/Library/Application Support/Adobe/AAMUpdater/1.0/
Let me know if it works for you.
Regards,
Ashutosh

Filter operators when passing presentaion varibles takes as "equal"operator

Similar Messages

Maybe you are looking for