$filter to where condition
Hello,
I am using the XML model to exchange data between the Web and SAP. However we need to change the $filter for the table to an ABAP where condition. Is there by any chance someone might know some Standard method / FM to do so ?
Regards
Shabir
READ TABLE it_filter_select_options INTO ls_select_options WITH KEY property = 'xxx'. or what do you mean?
Regards,
RW
Similar Messages
-
HI gurus,
How can I use a WHERE condition in obiee 11g in the Column formula or in the BMM layer in the repository .
Thanks in advance
Reg,
NivHi,
In the Column formula, the functions like Case When clause (Category: Expressions) can always be used in the building the expression.
For the above, there is always two options
1. Derived from Physical Mappings - this will list only the physical tables that are pulled into the LTS of the logical table
2. Derived from existing columns using an expression - this will list all the Logical tables in the RPD
If you want to apply the filter i.e where clause on the entire table, then go to Content Tab of the LTS
Enter your WHERE clause filters in the section - Use this "WHERE clause".....
The above modifications will apply where clause on all the columns
Please mark if it is helpful
Srikanth -
Where condition for a column in BMM
Hi Gurus,
I have a requirement where in the BMM(The LTS for this logical table is say 'Fact'), I need a logical column with the following definition.
count(Dim.status) where Dim.status = ' Accepted' (I didnt add the Dim table to the LTS yet, should I?)
I know that we can do a count(Dim.status) in the column source . but for the where Dim.status = ' Accepted' part im not sure what to do.
Should I bring the Dim table as a LTS and define the 'where' condition in the content tab? will that work?
but what if I have another logical column where I need dim.Status = 'Declined'( we have many more status)
Plz helpThe suggest statement as Filter(count(Fact.Dollars) Using("dim.status = 'accepted'))
is based on Answers, this would care about the column is available in Subject Area or not thats it.
The same kind of functionality can get the using rpd.
There you might need to map/add (fact source properties and then map using pencil icon on 11g add button in 10g) the dim table to the fact
so that you can get the expression based on physical columns as
case when dim.status = 'accepted' then Fact.Dollars else 0 end
use Aggregate tab for sum;
Since you are using Fact.Dollars it suppose to be sum, ROW_WIDs go by counts
Hope this helps :) for more Qs send email
If helps mark -
Apply "WHERE CONDITION" in "MASTER/DETAIL FORM" in "ORACLE APEX
Hi to all respected Gurus of this community.
I have a problem and I hope that there must be solution in this community and I am not aware of that till now.
I have a master/detail form in Oracle Application Express. Now, I want to apply a where condition in master-form to filter the data as per requirement but I cannot do so.
There is an option of "Modify Query" in "Query Definition". According to the instructions I am selecting the desired column (HR_Category) in left and providing text string 'M-9' in the right column to filter the data where HR_Category is M-9, and when I press apply changes, it gives me an error that
"1 error has occurred
The condition you are adding has caused the query to be invalid."
Please help how to proceed to apply a where condition.
Regards
Muhammad Uzair Awan
Oracle APEX Programmer
Pakistanuzairmalik wrote:
Hi to all respected Gurus of this community.
I have a problem and I hope that there must be solution in this community and I am not aware of that till now.
I have a master/detail form in Oracle Application Express. Now, I want to apply a where condition in master-form to filter the data as per requirement but I cannot do so.
There is an option of "Modify Query" in "Query Definition". According to the instructions I am selecting the desired column (HR_Category) in left and providing text string 'M-9' in the right column to filter the data where HR_Category is M-9, and when I press apply changes, it gives me an error that
"1 error has occurred
The condition you are adding has caused the query to be invalid."
Please help how to proceed to apply a where condition.
Regards
Muhammad Uzair Awan
Oracle APEX Programmer
Pakistan
Probably a syntax error. Check the syntax of the new clause very carefully.
Can you post the query indicating which predicate is the new one? If you need to change the column and table names for confidentiality -
Using Filter and where clause in GoldenGate
Hi,
I need to use where clause in extract process.
The condition i need to use is :- where (CODE LIKE '10%' OR CODE LIKE '0%')
how to use LIKE operation along with OR in extract.
I have multiple where conditions these are straight i.e = and <> which are working fine. But LIKE is not working.
Please do assist for the same.
Thanks.GoldenGate uses FILTER and SQLPREDICATE (and COMPUTE is a variation that can work, depending on how you are trying to manipulate the data).
To filter data, you can use:
● A FILTER or WHERE clause in a TABLE statement (Extract) or in a MAP statement (Replicat).
● A SQL query or procedure
● User exits
FILTER comparison operators include:
Comparison operators:
> (greater than)
>= (greater than or equal)
< (less than)
<= (less than or equal)
= (equal)
<> (not equal)
WHERE clause permissible operators:
Column names PRODUCT_AMT
Numeric values -123, 5500.123
Literal strings "AUTO", "Ca"
Built-in column tests @NULL, @PRESENT, @ABSENT (column is null, present or absent in the row). These tests are built into Oracle GoldenGate. See “Considerations for selecting rows with FILTER and WHERE” on page 155.
Comparison operators =, <>, >, <, >=, <=
Conjunctive operators AND, OR
Grouping parentheses Use open and close parentheses ( ) for logical grouping of multiple elements.
You could try using a GoldenGate string function. You know what the leading one or two characters (0 and 10) are.
Use the @STREXT function to extract a portion of a string and do a comparison there. Or take care of it using SQLEXEC on replicat (call a function to be able to use LIKE). -
Query in SQL to display count of all records but where condition is present
Hi All,
I have situation where I need to display count of all records all particular period but in where condition type condition has to be present :
Please find the below sample data :
PERIOD_ID TYPE MV_COUNT IS_FLAG
20110401 AM 1 0
20110401 AM 1 0
20110401 MS 29 0
20110501 MS 1 0
20110601 MS 14 0
20110701 MS 2 0
20110401 MS 1 0
20110401 AM 2 0
20110401 AM 69 0
20110401 AM 2 0
finally I need for type = MS
i) total is_flag count for all the periods
ii) for period=20110501 what is the mv_count
I need to use the table single time (ie not self join outer joins )
I have tried to use partition by clause but it will filter out the data .
Cheers,
Sp842106 wrote:
finally I need for type = MS
i) total is_flag count for all the periods
ii) for period=20110501 what is the mv_count
I need to use the table single time (ie not self join outer joins )
I have tried to use partition by clause but it will filter out the data .
select sum(is_flag) is_flg_count,
sum
case when period = 20110501 then mv_count else 0 end
) mv_cnt_for_20110501
from your_table
where type = 'MS'; -
Issue with Dynamic WHERE condition in Cursor in FUNCTION.
Hi All,
I am facing an issue with cursor having dynamic WHERE condition in a function.
Below is the FUNCTION:
CREATE OR REPLACE FUNCTION EXCEPTION_MERGE(TABLE_NAME IN VARCHAR2, TAB_NAME IN VARCHAR2)
RETURN VARCHAr2
IS
stmt_tabcols VARCHAR2(32767);
v_columnname VARCHAR2(32767);
CURSOR C1 IS
SELECT 'A.'||A.COLUMN_NAME ||' = '|| 'B.'||B.COLUMN_NAME COLUMN_NAME
FROM
SELECT COLUMN_ID, COLUMN_NAME
FROM USER_TAB_COLUMNS
WHERE TABLE_NAME = TABLE_NAME
AND COLUMN_NAME NOT IN ('ERROR_TAB_ID','ERROR_LOAD_DATE')
) A,
SELECT COLUMN_ID, COLUMN_NAME
FROM USER_TAB_COLUMNS
WHERE TABLE_NAME = TAB_NAME
) B
WHERE A.COLUMN_ID = B.COLUMN_ID;
BEGIN
FOR TABCOL IN C1
LOOP
stmt_tabcols := stmt_tabcols ||TABCOL.COLUMN_NAME||',';
END LOOP;
stmt_tabcols := RTRIM(stmt_tabcols, ',');
RETURN stmt_tabcols;
END;
SELECT EXCEPTION_MERGE('WC_W_TEST_FS','WC_W_TEST_FS_GBL') FROM DUAL;It throws, below error:
ORA-06502 : PL/SQL : Numeric or value error : character string buffer too smallIf I REPLACE TABLE_NAME and TAB_NAME with hard coded values , it works fine. Can somebody look at the code and let me know the issue.
Edited by: ace_friends22 on Sep 9, 2012 1:08 PMEtbin neatly demonstrating the value of posting code in a manner which makes it easy to read.
It's obviously an naming/scoping issue. Faced with a join like this:
where table_name = table_namethe engine looks for something called table_name in the current scope. It finds it, a column on USER_TAB_COLUMNS and applies it to both sides of the filter. It has no way of knowing that there is also a parameter called TABLE_NAME, because that is outside its current scope. Consequently the query will join every table in your schema regardless of what values you pass, and that's why you blow the buffer.
Takw etbin's advice and name your parameter with a prefix:
where table_name = p_table_nameThis isn't a column in USER_TAB_COLUMNS which will force the engine to look in the next scope up, which in your case is the function, where it will find your parameter and so generate a query for the passed values only.
Cheers, APC
Edited by: APC on Sep 9, 2012 8:03 AM -
Difference between View Creiterias and Where Condition when defining a VO
Hi Friends,
I am trying to understand the difference between specifying Where clause conditions in the View Criteria or directly in the VO Query.
both meet the same requirement in executing the Query with the Where Conditions. Is there ay specific diff.?
Thanks,
UserHi Rade
There are many ways to optimize the performance of your querys or VO, the most importantly is thing is not to make full scans of your table, always use the explain plain testing the query execution, filter using the indexs atributes, VO editor have a tuning SQL execution in the query optimizer hint you can use FIRST_ROWS for example.
More information to tuning your query check this link [http://download.oracle.com/docs/cd/B28359_01/text.111/b28303/aoptim.htm#i1006353]
Good Luck -
CASE Statement in Where Condition with Multi Valued parameter in SSRS
Hi All,
I am little confused while using CASE statement in Where condition in SSRS. Below is my scenario:
SELECT
Logic here
WHERE
Date IN (@Date)AND
(CASE
WHEN NAME LIKE 'ABC%' THEN 'GROUP1'
WHEN ID IN ('123456', '823423','74233784') THEN 'GROUP2'
WHEN ABC_ID IS NULL THEN 'GROUP3'
ELSE 'GROUP4'
END ) IN (@GROUP)
So above query uses WHERE condition with CASE statement from @GROUP parameter. I want to pass this parameter as multi- valued parameter and hence I have used CASE statement IN (@GROUP).
For @Date one dataset will pass the available and default values and
for @GROUP parameters, another dataset will pass the available and default values.
But this is not working as expected. Please suggest me where I am making mistake in the query.
Maruthu | http://sharepoint-works.blogspot.comHi Maruthu,
According to your description, I create a sample report in my local environment. It works as I expected. In your scenario, if the selected values from the Date parameter contains some of the Date field values, the selected values from the GROUP parameter
contains some of GROUPS (‘GROUP1’,’GROUP2’,’GROUP3’,’GROUP4’) and the corresponding when statement is executed , then the dataset returns the corresponding values.
In order to trouble shoot this issue, could you tell us what results are you get and what’s your desired results? If possible, you can post the sample data with sample dataset, then we can make further analysis and help you out.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Concatenation error - when i use text column value in where condition.
Hi,
i am creating Materialized view using few columns from two tables and as per requirement i need to prepare select statement with where condition in another column.(new column)
i tried like below....
create materialized view MAIN
refresh force on demand
as
select
a.table_name,
a.column_name,
b.trial_name,
'select * from '||a.table_name||' where '||a.column_name|| ' = '|| b.trial_name||';' "QUERY"
from
exp_csv_tB a,
exp_csv_tr b;
a.table name value is : monitoring_table
a.column_name value is : study
b.trial_name = fty777
Materialized view created with extra column but it is not added '' (codes) to text value in where condition.
output which i got is :
select * from monitoring_table where study = fty777;
but
i need output like
select * from monitoring_table where study = 'fty777';
fty777 value should be in codes like 'fty777'. i read some articles but didnt get this example.
please help.Try this:
CREATE MATERIALIZED VIEW main
REFRESH FORCE ON DEMAND
AS
SELECT
a.table_name,
a.column_name,
b.trial_name,
'select * from '||a.table_name||' where '||a.column_name|| ' = '''|| b.trial_name||'';'' "QUERY"
FROM
exp_csv_tb a,
exp_csv_tr b;
You have to give double single codes for semi-colons ..
Regards.. -
Checkbox Value in where condition of query
Hi,
I have a check box which shows values based on the LOV's . If i check on the checkbox the values that are selected on the check box must be used in the where condition to update the table.
Please suggest me how to take the check box values.
Am using the below methos to update but its not happening
Declare
old_cohort_name varchar2(500);
new_cohort_name varchar2(500);
l_cohort_id apex_application_global.vc_arr2;
begin
l_cohort_id := apex_util.string_to_table(:P64_CASCADE_COHORT_NAMES);
select cohort_name into old_cohort_name from study_cohort
where cohort_id = :p64_cohort_id;
select :P64_COHORT_NAME into new_cohort_name from dual;
if old_cohort_name <> new_cohort_name then
update study_cohort
set
cohort_name = new_cohort_name
where cohort_id = :p64_cohort_id and
cohort_id = l_cohort_id; // here is the variable i am using when checkbox is checked
End if;
End;
Please suggest me how to modify the code
Tx
SudhriHi Sudhri,
where cohort_id = :p64_cohort_id and
cohort_id = l_cohort_id; // here is the variable i am using when checkbox is checked If this is the code you are actually using, then the condition would only be met if l_cohort_id = :p64_cohort_id because you are using an AND condition over the same column in the where clause, so it will only return rows when both values are the same. Then, I think that it seems not to be working for you because :p64_cohort_id and l_cohort_id have different values, and no row is getting updated then. If the values you are selecting in your checkboxes are several ids of rows to update, besides the one with id :p64_cohort_id, then maybe the condition you need is something like this:
WHERE cohort_id = :p64_cohort_id OR instr(l_cohort_id, cohort_id) != 0;Hope that helps.
Regards,
Sergio -
Num and Value in Where condition
Hi all,
I have table:
create table T1
f1 fixed (1),
f2 boolean
then:
insert into T1 values (1,null)
and query:
select f2,Num(Value(f2,False)),Num(Value(null,False)) from
(select max(f1) x from t1)
left join t1 on x=f1
where 22 =Num(Value(f2,False))
Statement 'select f2 from (select max(f1) x from t1) left join t1 on x=f1 where 22 ...' successfully executed in 0 ms.
Result: ?;0;0
This is a bug? Known bug?
KR Lukasz.Hi Holger,
sorry it does nothing. Query still returns rows.
Thank you for help and explanation very much. I'm waiting to next MAXDB relase(s).
BTW
I have fixed this problem in that way:
select f2,Num(Value(f2,False)),Num(Value(null,False)) from
(select max(f1) x, 22 k from t1)
left join t1 on x=f1
where Num(Value(f2,False))=k
query does not return rows but... execution plan contains 䕘偒䕓卉低⁗䥔䠠.
Simple correction in where condition:
select f2,Num(Value(f2,False)),Num(Value(null,False)) from
(select max(f1) x, 22 k from t1)
left join t1 on x=f1
where Num(Value(f2,False))-k=0
And execution plan is proper too.
KR Lukasz. -
Single quote in dynamic where condition
BAPI_STUDENT_IDENTIFIC_ADD has a field called IDENTIFICATIONNUMBER. This field is later used in a dynamic where condition and causes a short dump when it contains a single quote. I will change the program that calls the BAPI to check for single quotes, but is there anything else I need to check for to ensure a correct where condition?
Thanks,
DanHi Dan,
The best way to ensure correctness of syntax of a dynamic where condition is:
Run the program in debugging mode, Get the Query that is generated dynamically and write it to some other ABAP program and perform syntax check.
This will help you to remove all the syntax errors.
Regards,
Darshil -
How to select data from a table using a date field in the where condition?
How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay -
How Can I Change the Where Condition In the First SQL Query?
SELECT IND_SSN, BEG_SVC_DT, END_SVC_DT,
TRUNC(MONTHS_BETWEEN((TO_DATE('19'||END_SVC_DT,'YYYYMMDD')),BEG_SVC_DT)/12),
mod(trunc(months_between((to_date('19'||end_svc_dt,'YYYYMMDD')),BEG_SVC_DT)),12),
DECODE((SUBSTR(END_SVC_DT,5,2) - SUBSTR(BEG_SVC_DT,1,2)+1),-1,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-2,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-3,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-4,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-5,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-6,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-7,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-8,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-9,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-10,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-11,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-12,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-13,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-14,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-15,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-16,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-17,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-18,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-19,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-20,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-21,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-22,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-23,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-24,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-25,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-26,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-27,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-28,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-29,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-30,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
-31,((SUBSTR(END_SVC_DT,5,2)+ 31) - SUBSTR(BEG_SVC_DT,1,2)),
30,0,
(SUBSTR(END_SVC_DT,5,2) - SUBSTR(BEG_SVC_DT,1,2)+1))
FROM SVC_OCCURRENCES
WHERE end_svc_dt not in ('PRESENT')
AND SUBSTR(END_SVC_DT,1,1) IN '9'
AND SUBSTR(END_SVC_DT,5,2) NOT IN ('31')
and (SUBSTR(END_SVC_DT,5,2) - SUBSTR(BEG_SVC_DT,1,2)+1) not in ('30')
UNION
SELECT IND_SSN, BEG_SVC_DT, END_SVC_DT, NULL, NULL, NULL
FROM SVC_OCCURRENCES
WHERE SUBSTR(END_SVC_DT,1,1) IN 'P'
The above code works fine and I get the correct numeric values from the SQL
query when the varchar2 end_svc_dt field is numeric however if I have encoded
the word 'PRESENT' in the varchar2 end_svc dt field the SQL query aborts at
the last statement in the WHERE condition. The beg_svc_dt field is a Date field.
and (SUBSTR(END_SVC_DT,5,2) - SUBSTR(BEG_SVC_DT,1,2)+1) not in ('30')
I get the following error message
ERROR ORA-0722 INVALID NUMBER
I encode the word 'PRESENT' in a varchar2 end_svc_dt field on an Oracle form. This is the only word that can be encoded.
Is there some way that I can bypass the last statement in the where condition and
compute the values from the SQL query without having the SQL query abort?
Eventually I want to do this in a report. I know that this sounds strange but can it be done?The above code works fine and I get the correct
numeric values from the SQL
query when the varchar2 end_svc_dt field is numeric
however if I have encoded
the word 'PRESENT' in the varchar2 end_svc dt field
the SQL query aborts at
the last statement in the WHERE condition.Ouch!
Storting dates in VARCHAR2 columns is bad practice, poor design and makes for horrible code.
The beg_svc_dt field is a Date field.
and (SUBSTR(END_SVC_DT,5,2) -
SUBSTR(BEG_SVC_DT,1,2)+1) not in ('30')If it's a date field then why on earth are you trying to SUBSTR it. SUBSTR = sub-string i.e. take a sub section of a string not sub-date.
I get the following error message
ERROR ORA-0722 INVALID NUMBERAnd you're surprised by this?
Is there some way that I can bypass the last
statement in the where condition and
compute the values from the SQL query without having
the SQL query abort?Store your dates properly, use additional flag columns for non-date information and code your SQL properly.
Eventually I want to do this in a report. I know
that this sounds strange but can it be done?Yes, most things are possible.
Maybe you are looking for
-
IPad will not connect to Windows 7
Hi, I am trying to connect my iPad (32 GB Wifi) to my Windows 7 machine. This is the same machine that I setup my iPad with and it has not been connected to any other machines. When I plug it into my computer with the USB cord, the iPad states that i
-
How do you make a required checkbox field stop a form submitting if not checked.
Hello, I have a form which needs people to accept two checkboxes before the form will submit upon clicking a button. I am using Acrobat X Pro. The form does not submit when a required text field is empty but when the checkboxes are empty it still tri
-
WD for Java and UWL work items (Adobe HCMPF)
Hi Experts, I am implementing the Adobe forms HCMPF from the HR Administartive Services BP based on the 'old' WebDynrpo for Java. SAP references in SAPnote 1024326 that when the WD Java is preferred over the WD ABAP one can configure the Application
-
Stock quantity vs sales order confirmed quantity
when creating a sales order for a particular item, the system confirms quantity 100 whereas when i check the stock status of the material using any inventory report( e.g.. mmbe, mb52), the system shows 200 of the stock in unrestricted use. When I sim
-
Iphoto lybrary converted to Aperture
When I try to start iPhoto I get the message that it has become an aperure library. I did not convert it and evne do not have Aperture. How can I rebuild it as an iPhoto library ?