Stock quantity vs sales order confirmed quantity

when creating a sales order for a particular item, the system confirms quantity 100 whereas when i check the stock status of the material using any inventory report( e.g.. mmbe, mb52), the system shows 200 of the stock in unrestricted use.
When I simulate the material requiremnets using ATP quantities, the system shows a previous sales order against which quantity 100 is shown as confirmed. However, when I checked that particular sales order, it is already delivered and invoiced(hence it should not be shown in the ATP quantities).
Can anyone please help me and suggest what is wrong here? it is very urgent.

I know that 100 materials are already assigned to this order but the problem is that the order is already delivered and invoiced i.e. the whole sale cycle has been completed for that particular order.
anything else i should check??

Similar Messages

Sales order stock error in Process order confirmation

Hello SAP Gurus,
In Make To order scnario while I do COR6 order confirmation it gives me Error that Sales order stock does not exist.
Can anyone suggest me which way I can remove the error?
What is the Transaction and movement to transfer stock to SALES ORDER?
Please reply...
Thanks & Regards,
Bhavik Dangi.

Hi,
As per your mail, you can move the stock from normal stock to sales order stock through transaction MB1B with movement type 412 E. This route is generally follow if want to assign stocks manually to sales order stock otherwise if follow the PP route then system generates the stock against the sales order line item at the time of produciton confirmation and requirement type use in this are KSL, KE.
Rewards if it helps.
Regards
Goutham

Stock confiramtion at sales order level for future date- Availability Check

Hi all
Here is the scenario
This setting is available in the system:
Stock is available
Sales order created with Requested delivery date in future-> not confirmed
Sales order created with Requested del date today -> confirmed
The requirement :
how and where to change this setting in IMG so that also orders with Requested Delivery Date in future are confirmed if stock is available.
As this is urgent request to respond quickly.
Regards
Devender

Hello Devender,
You can achieve the mentioned scenario by configuring ATP. You can do ATP with RLT or ATP without RLT.
In ATP with RLT, system will check and confirm the quantities from existing stock only and if quantities are insufficient then the system will consider inline POs or manufacturing time to confirm remaining quantitites.
Else you will be getting schedule lines for only items in stock and remaining will be unconfirmed as ATP without RLT will be activated i.e., system will check and confirm the quantities from existing stock only.
Types of Availability Check in Sales and Distribution
Processing
There are three types of availability check:
_ Check on the basis of the ATP quantities
_ Check against product allocation
_ Check against planning
The following SD-specific control features need to be maintained in Customizing:
_ Checking group
The checking group controls whether the system is to create individual or collective
requirements in sales and shipping processing. In addition, a material block for the
availability check with transfer of requirements can be set here. The checking group can
also be used to deactivate the availability check. This option was created especially for
the assembly order so that when the bill of material is exploded in the assembly order,
the individual components, if necessary, can be classified as non-critical parts as far as
procurement is concerned.
The checking group specifies in combination with the checking rule the scope of the
availability check. It is proposed in the material master record on the basis of the material
type and the plant, and copied into the sales and distribution documents.
_ Checking Rule
You use the checking rule to control the scope of the availability check for each
transaction in sales and distribution. You also specify whether the check should be
carried out including or excluding replenishment lead time. The individual checking rules
define by transaction, which stock and inward and outward movement of goods should
be taken into account for the availability check.
_ Schedule line category
You can control with the schedule line category whether an availability check and
transfer of requirements should be carried out in the sales documents. The possible
settings for this at schedule line level are dependent on the settings in the requirements
class which is determined from the requirements type of the material.
_ Delivery item category
The delivery item category can be used to control whether an availability check takes
place in deliveries.
Requirements type
The various requirements are identified by their requirements type. The requirements
type refers to the requirements class and its control features.
_ Requirements Class
The requirements class contains all control features for planning such as relevance for
planning, requirements planning strategy and requirements consumption strategy. In
addition, it is specified at a global level whether an availability check is to take place for
the material in the sales and distribution documents on the basis of the ATP quantity
(ATP = available to promise) and whether requirements are to be passed on. A finer
degree of control can be obtained for sales documents using the schedule line category.
Replenishment lead time is only included in the check performed on the basis of the
ATP quantity.
Prerequisites
An availability check can only be carried out if the following prerequisites have been fulfilled:
_ The control elements described above for the availability check must be maintained in
Customizing for Sales and the relevant assignments made to the sales transactions
_ The availability check must be switched on at requirements class level and - for the
availability check in the sales documents - at schedule line category level
A requirements type must exist by which the requirements class can be found
_ A plant must be defined. It can either be proposed from the customer or material master
record or can be entered manually in the document.
_ A checking group must be defined in the material master record on the Sales/plant data
screen in the Availability check field
Configuring entries of the Availability Check
IMGSDBasic fncsAvailability check and TORAvailability checkAvailability check with ATP logic or against planningDefine checking groups
You can use SAP std checking groups of 01 for summarized reqts or 02 for daily reqts or u can create ur own.
The columns total sales and total deliveries are selection options whereby u can configure a checking rule to sum up reqts to post to MRP either individually or by day or week.
Column 5, Block qty; set this block if u want several users to be able to process the material simultaneously in different transactions without blocking each other. The No Check indicator is used when u want a material to not be relevant for an ATP check.
Defining a material block for other users. The Block checkbox is an indicator that enables u to block the particular material from being checked for availability if it is already being checked at the same time by another user.
Defining the default value for checking groups. However should no entry exist for the checking group in the material master record, one can set a default value per material type and plant.
Controlling the availability check. In this section, u tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sd transaction. The carry out control for the availability check must be maintained for both the sales order and delivery.
Reward points if helpful.
Regards,
Priyanka

Stock reserver for sales order

Dear All
1. MMBE-Check the stock with batch no 6000000340 with 200 qty
2. Sale Order Created-
3. MB1B - Used Movement type 412 E with Inputs such as Sales Order,[warning message: sales order is not provided for this goods movement] after pressing the document is posted
4. In MMBE When i check the stock under batch no 6000000340 with 150 qty in unrestricted stock and Sales order Stock i can see the 50 quantity stock
Query is
1. Why the 50 quantity stock which is reserved for Sales order stock is seen under unrestricted stock and not under Reserved tab
2. When i create delivery with the same material and batch no, the stock is reduced from unrestricted stock[150 -10delivery qty] = its showing 140 qty, but stock should be reduced from 50 quantity which i have reserved for Sales order.
Please guide
Regards
Sandeep Bhowmick

Hi Sandeep
Visualize this scenario
Material is pen in MMBE unrestricted stocks is 100
Sales order created with item cat TAN with special stock indicator E not marked and the order no is say 55 for 10 qty
Now you are reserving stocks in t code MB1B with movement type 412 E inputting the order no xx and saving it
Now in MMBE put the material as pen and input plant and storage location etc press F8
unrestricted stocks will be 90
Sales order stocks will be 10
If you click on the details of this sales order stocks you will see the order no xx and qty will be 10
(read your first post exactly the same of this)
now are delivering the sales order and doing the pgi
Now in MMBE
unrestricted stocks will be 80
Sales order stocks will be 10 (this exactly is your problem)
that means the system having a reservation in MMBE for a particular sales order xx not utilizing those stocks and still takes the stocks from the unrestricted and this is wrong
This is happening because the item cat TAN is not marked with special stock indicator E during order creation of xx
Now mark the item cat TAN with special stock indicator E and create a fresh cycle say order no yy
When you do PGI for order no yy the unrestricted will be 90 and there wont be any sales order stocks as the stocks are already PGIed
That means the system picks up the correct stocks for delivery
The system behaves very perfectly When there is sales order stocks in MMBE i dont understand ,what is the reservation you are talking about
Regards
Raja

Stock reservation for Sales Order

Dear Friends,
My requirement is to reserve the stock for a particular sales order.
Material is Make to Stock.
I tried with transaction code MB1B/MB1C/MB1A with movement type 412E/561E/232E for a particular sales order.
If I view stock overview with transaction code MMBE,I can see the stock is reserved for a particular sales order.
Now when I am creating delivery for this reserved stock with reference to another sales order,delivery is created.Logically it should not happen.Delivery should create only with reference to particular sales order for which stock is reserved.
Here I checked OVZ9 and ensured tick is for include sales reqmts.
Special stock is blank for sales order item category.Transaction code is VOV7.
If I make the sales order item category as E and if I am trying to create a delivery for sales order for which stock is not reserved system does not allow to create delivery.
Please suggest me how to meet my requirement.I want to reserve the stock (Make to stock) only for particular sales order.
Thanks in advance.
Regards,
Shrikant

Dear santosh/Kapil,
Thank you very much for your immediate reply.
Santosh stock is getting reserved but still I can despatch this reserved stock against a sales order for which this stock is not reserved.
Details are as below,
Material---- ABC,Batch is xyz,batch quantity is 2 TO
Sales orders are 111,112,113,114 and so on.
Now as per your advise I have done the reservation for SO 111 for material ABC for batch xyz.
When I checked MMBE it shows that material ABC of batch is reserved but I could not see SO number here but yes in reservation I could see the sales order number.
Now I tried to create the delivery for SO 113 for which the batch xyz is not reserved it is reserved for SO 111.But still I could create delivery for SO 113 for batch xyz.
I mean batch xyz is reserved for SO 111.
Am I missing anything here.
Dear Kapil,
I do not want to reserve the entire order quantity of sales order.I mean only on few ocasions I want to reserve the stock.
I mean today I want to reserve partial quantity of sales order.
Regards,
Shrikant

Sales Order confirmation EDI

Is there any Standard SAP Program which tracks the changes made Quantity , Schedule Date and Price of the Sales orders Posted through EDI .
Can we have these Sales orders Changes tracked in Order Confirmation IDOC
IDOC_OUTPUT_ORDRSP which sales generates the sales order confirmation
I see in the the output type creation transaction code V/30
there is a option under General data Tab where we can specify the
Program / FORM routine Specifying the Program and Form routine will it help us to Capture the changes made to the Sales order . If so what is the Program / Routine. Thanks for your support.

Hi Balaji,
This is your old friend damo(annamali university)!. Saw your question!. I will send you the answer.
[email protected]
Regards,
Damo

ATP Check against customer stock for return Sale order

Hi Friends,
Pl.help in this.
1. Is it possible to configure ATP check against Customer stock in a Sale order/Return order/any other way? ( Actuallly, client wants to take back empty cylinders through return sale order by ATP check against the customer stock)
Regards,
Mani

Hi Mani ,
Are you taking cylinder as returable packing item or not?
ex- For soft drinks or beverages industry it pretty common , they use thel returnable package material type and more over why you want use return sales order for this?
Note- Just plz explain scenario to MM and PP People also as availability check with all combination
Hope it is helpful to you,
Regards
Venkat

Reg.Stock keeping against sale order

Dear Gurus
how to purchase and keep stock against one sale order.pls explain,more over in our concern the material goes to consumption account with account assignment category E, but should not keep blank the AAC field in PO,I tried in my level best but no gain.

Dear
If you wnat to block a stock for the particular sales order then you can convert the unrestricted stock to the sales order stock.
but you need to also customize for the requirement type that is determied so that it can take the sales order stock
i think the movement type 412 E can be used for moving from normal stock to sales order stock
thanks
Virandr

How to tigger SISCSO01 Idoc for sales order confirmation

Hello Experts,
I have a requirement where in I need to send the sales order confirmation as an IDoc. I need to use SISCSO01 IDoc type for that.
Can any please tell me how to configure SAP to trigger this IDoc when ever a sales order is confirmed.
In which T-Code is this sales order confirmation is done? and how to trigger the IDoc?
Thanks,
Suma

Hi Suma,
We need to maintan BD64 and WE20 with the Idoc SISCSO01 type. This is will automatically trigger the Idoc when we create a sales order.
You need to matain NACE for tiggering the IDoc. For that use BA00 in output types and configure program RSNASTED, from rotine as ALE_PROCESSING. In default values give transmission medium as ALE and parter function as SP.
Then come back to NACE-Condtion records and maintain meduim as A and date as 4.
Please reward if helpfull.
Thanks,
Srikanth

Releasing credit sales order confirmation

Hi
We are using credit limit check. If the customer has credit issues, the sales order will get retained and the confirmation is lock. The issue is that after the released of the sales order the confirmation is not being unlock and the sales order is not taken into account by the filter of the backorder process.
Where should I verify that the sales order confirmation field is unlock at the moment of the credit release process?
Thanks a lot.

Two places you can check in the sales order, click on the document flow button on the top. Then click on status button, expand the header status. Here you can see the credit status. The other place is go to menu Goto -> Header ->status. Here you can see the credit status field carries relevant information.
Regards,

How to send IDoc(Sales Order Confirmation) without Message control

Hi,
I need to send Sales Order confirmation,Delivery and Invoice through ALE (IDoc's). I am asked not to use MESSAGE CONTROL or CUSTOM IDoc to send confimation.
I dont need to send a instant confirmation but i can do it at a specified time intervals.
Do we have any other possiblity other than the both?
Can you please give the steps to do, if possible?
Thank you in advance,
Gangolu.

Hi
This link may be useful
Re: Re-open EDI - ORDCHG for outbound sales order

Sales order confirmation form in Adobe Forms-Urgent

Hi Experts,
I have to create an adobe form for Sales order Confirmation.
I have worked on ABAP but no idea about Adobe forms. I am new for this.
Could you please tell me what are are the things required to delelop an adobe forms
What are the steps i have to follow to create an adobe form.
I have to do coading in ABAP DEV Workbench or somewhere else?
If somewhere else then in which language and where ?
If someone has created a sales order confirmation adobe forms earlier please send me the code for reference.
Regards,
Nik

Thanks again Vinod for this input. I've already had a look into the form where nothing named as 'TITLE' appear. And frankly I'm not very strong in identifying the print program for a given form. I try with debug but taking into account my poor skills in ABAP I'm lost with all those function module. And the print program that I could get from [NACE] includes so many things that I'm still not able to find out the OPEN_FORM statement. But I keep on trying.
Regards.
Nozome.

Printing sales order confirmation if order changes

Hi all,
I have to implement some changes in output control to achieve a particular requirement.
Business wants sales order confirmations to get re-printed if and only if some changes in the sales order were cought.
For example if the quanity of a position changes then, the sales order confirmation must be re-printed.
I was thinking to use requirement routine for sales order confirmation but in the structure komkbv1 and kompbv1 there are not all the fields i need to understands if in the sales order, any changes have been performed.
Another way would be the user exit save_document_prepare in which i can use xvbak and yvbak in order to gather info about the changes in the sales order, but i am not sure this is the right way to achieve what business has asked to me.
Do you have any ideas? Please, any suggestion is welcome!
Regards,
Fabrizio

Hi gurus,
My idea is:
-user exit save_document_prepare: check chenges in SO using xvbak, yvbak etc.. If a change occurs i will set a particular parameter using "SET PARAMETER".
-user exit USEREXIT_KOMKBV1_FILL: i will fill the communication structure with respect of the instruction of "GET PARAMETER"
- requirement routine for sales order (vofm): checking of the communication structure to understand if sales order confirmation has to be re-processed or not.
What do you think about this solution?
Thanks,
Fabrizio

Trying to create a Sales Order Confirmation through IDoc

Hi,
I am trying to create Sales Order Confirmation through ALE with message control.
My recieving system is XI server.
Can u please send me the steps to what to be done to trigger IDoc automatically.
The condition types and access sequence created is for Output type customer but i am sending it to XI Server.
please help me.
Thank you in advance,
Gangolu.

Hi Gangolu,
Have a look at url. Hope this provides some inputs.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
Thanks
Lakshman

Message type for Inbound SD EDI message : Sales Order Confirmation

Hi,
There is an EDI message coming into SAP for sales order confirmation post delivery.
The data in the Idoc should then proceed to update the system and create the delivery document.
I need a standard Message Type which when triggered, will perform the above actions.
Will ORDRSP Message type be useful here.
Thanks ,
Ankit

Hi,
Message type/Idoc type
"ORDERS / ORDERS04 --For orders
ORDCHG / ORDERS04 -Order change
ORDRSP / ORDERS04 --PO
DESADV / DELVRY02 --Deivery
INVOIC / INVOIC02"-Invoice
Thanx,
Pramod

Smartforms SAP-delivered form template for SD Sales Order Confirmation

All,
I am trying to find the SAP-delivered form template for SD Sales Order Confirmation. I looked in OSS Note 430621 and I can not see it there.
This is the sales order likeness of what LB_BIL_INVOICE is for invoice.
Thanks in advance, Saint Paul Pete

Hi Balaji,
This is your old friend damo(annamali university)!. Saw your question!. I will send you the answer.
[email protected]
Regards,
Damo

Stock quantity vs sales order confirmed quantity

Similar Messages

Maybe you are looking for