Filtering one dropdown on the basis of value from another dropdown in WAD
Hi All,
i have a bw dropdown called 'Corporate' and another called 'Facility'. there can be several facilties under a Corporate.
what i need to do is filter the facility dropdown on the basis of the value selected in the corporate dropdown.
thanks in advance
Godhuli
Hi Godhuli,
You can achieve this by the following procedure.
For your Corporate dropdown you need to specify a DataProvider.
For Your Facility dropdown you need to specify a Dataprovider.
For the Corporate dropdown there is a property "Affected DataProvider".
In that property select the DataProvider of your Facility dropdown.
So now when you select Corporate your Facility will get filtered by the values for that selected Corporate dropdown value.
Hope it helps.
Regards,
Parth.
Similar Messages
-
Populate texbox from list on the basis of value in another textbox
To achieve the above situation i have used the ontextChanged event of textbox.
But the problem is on postback the value in another texbox get lost .How to handle it ?
Any Suggestions?Hi,
I had tested again per your description,
called the same OnTextChanged method for both the textboxes, they were still worked well.
When I type the value in the first textbox, the second auto populate the value, and vice versa also.
Test1:<asp:TextBox ID="TextBox1" runat="server" OnTextChanged="TextBox1_TextChanged" AutoPostBack="true"></asp:TextBox>
<br/>
Test2:<asp:TextBox ID="TextBox2" runat="server" OnTextChanged=”TextBox2_TextChanged” AutoPostBack=”true”></asp:TextBox>
protected void TextBox1_TextChanged(object sender, EventArgs e)
TextBox2.Text = TextBox1.Text;
protected void TextBox2_TextChanged(object sender, EventArgs e)
TextBox1.Text = TextBox2.Text;
You can create a new simple project, then check whether it works.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell -
Id from one table showing value from another
I have an article id (rs_comments.id_com) but I would like it
to take this data and collect the value from another table.
I have joined the two tables with:
SELECT * FROM blg_comment_com INNER JOIN blg_article ON
idart_com=id_art
WHERE valid_com=1
ORDER BY date_com DESC
rs_comments.idart_com needs to be equal to rs_comments.id_art
displaying the value from rs_comments.title_art
How would I go about doing this. There only seems to be an
option in DW to do this with a dynamic list/menu but I just want to
display the text without option to change it.
Any help much appreciated.i was stupid. The answer was staring me in the face. No
wonder no-one bothered to reply... -
How can we read the screen field values from the report selection screen wi
Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razzuse this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ' -
I have recently bought a new mac mini running Lion, and yesterday I migrated an account off an older machine running Tiger.
I want to delete the older account from this machine as it is causing some problems with i-cloud, but I want to transfer the photos first and add them to a different account on the new computer.
So my question is How do I move all the photos from the i-photo library on one account to the i-photo library on another account?Copy the iPhoto library from the old Mac to the Desktop of the new one. Then download the paid version of iPhoto Library Manager, which is now compatible with Mt. Lion, and use it to merge the two libraries into a new, third library. This will preserve the two libraries in case the merged library isn't to your liking.
Here are screenshots of iPLM's coping and merging preferences:
When you're satisfied that the new, merged libraray is complete and working OK you can delete the two earlier libraries.
OT -
Variable type Hierarchy, how to get the value from another similar variable
Hi.
We have created a variable, type hierarchy (using ORGEH hierarchy in HR based on 0ORGUNIT). Let's call this VAR1. We want to fill this with an User Exit, beacuse we want VAR1 to have the value from another variable, VAR2, which is also type hierarchy (and based on the same characteristic).
However, when we program this user exit and use the VAR1 afterwards, it just behaves as if we have a single characteristic value and not a node value. As a result, we just get posts which do have the 'parent itself' as characteristic value, and none of the subnodes... Any hints as to what we can do in our User exit to get the value passed over from VAR2 to VAR1 as a node value? Is there any spesific syntax to be used here that we are missing? ( The VAR1 and VAR2 are both defined as hierarchy variables, we have double checked...).Hi,
are you on BI7.0? There you can create variables type replacement path and get the value out from a different variable without any coding.
regards
Cornelia -
Access the X-axis value from Flash Chart
Hi,
Is there a way I can access the X-axis value from Flash Chart to populate a report in another page? My X-axis is not a direct column in the table it is computed in the query.
X-axis is MON-YEAR computed from the Begin_Date column. I want to capture the MON-YEAR clicked by the user to populate a report for that Mon-Year.
Here is my chart SQL.
select 'f?p=&APP_ID.:18:&SESSION.:::::::' link,
to_char( "VIEW"."BEGIN_DATE",'MON-YYYY') label,
sum(decode(TYPE_Id,2,Value,0)) "Value-1",
sum(decode(TYPE_Id,1,Value,0)) "Value-2"
from "VIEW" where to_char( "VIEW"."BEGIN_DATE",'MON-YYYY')= to_Char(sysdate-100, 'MON-YYYY')
group by to_char( "VIEW"."BEGIN_DATE",'MON-YYYY'),
to_char( "VIEW"."BEGIN_DATE",'YYYY')
order by to_char( "VIEW"."BEGIN_DATE",'YYYY')
Any suggestions?
ThanksThanks Marco..
I did the same thing. I found this info at Re: Charts and links
in the forum.
Thanks for the help again.
Nimmi -
Trying to install a new version of SQL 2014 Std 64 or x86. Installing on Windows 8.1Pro 64bit machine.
I get:
"TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017."
I looked at the summary log and that is the only error.
I made sure there were no other instances of SQL on this machine. Uninstalled all VS2013 and sql instances just in case. IF there is somewhere to check if a previous version or license is causing the issue, i would be glad to check.
Any help would be appreciated.Hi,
Please read this thread with similar issue
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bdd94577-515c-49fa-be44-008eacece057/installing-sql-server-2012-on-a-new-vm-error-code-0x858c0017?forum=sqlsetupandupgrade
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Get the value from another node.
Hi, expert
In the component BT131I_SLS , I create a enhanced attribute in the node: BT131I_SLS/Details BTADMINI
Then i define the GET-V method to create a search help for the attribute.
Now , i want to pass a BP number to the search help function to filter the data.
We need to get the BP number as below:
When create a order, we input the product id ,
then there will be a popup window , we can choose a vendor in the window.
The vendor number is the value which we want to pass to the search help.
How can i do that ?
Thanks.
Oliver.Hi , expert
Can i use the 'get_related_entities' to get the value I need?
I think maybe i can use the method to get the value from another view which is not in my component.
Now I write codes in the GET-V method, as below:
method GET_V_ZZZFLD000011.
DATA:
LS_MAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING,
LT_INMAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB,
LT_OUTMAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB.
DATA: LV_PARTNER_NO TYPE CRMT_PARTNER_NUMBER.
data: lr_current TYPE REF TO if_bol_bo_property_access,
lr_entity TYPE REF TO cl_crm_bol_entity,
lr_col TYPE REF TO if_bol_bo_col,
value TYPE string.
lr_entity ?= me->collection_wrapper->get_current( ).
lr_col = lr_entity->get_related_entities( iv_relation_name = 'Relation_Name' ).
lr_current = lr_col->get_current( ).
* value =
LS_MAP-CONTEXT_ATTR = 'EXT.ZZZFLD000011'.
LS_MAP-F4_ATTR = 'LGORT'.
APPEND LS_MAP TO: LT_OUTMAP.
* LS_MAP-CONTEXT_ATTR = 'EXT.ZZZFLD000011'.
* LS_MAP-F4_ATTR = 'LANGU'.
* APPEND LS_MAP TO LT_INMAP.
IF SY-SUBRC = 0.
ENDIF.
CREATE OBJECT RV_VALUEHELP_DESCRIPTOR
TYPE
CL_BSP_WD_VALUEHELP_F4DESCR
EXPORTING
IV_HELP_ID = 'ZHELP_ZSAKCDD'
* IV_HELP_ID_KIND = IF_BSP_WD_VALUEHELP_F4DESCR=>HELP_ID_KIND_COMP
IV_HELP_ID_KIND = IF_BSP_WD_VALUEHELP_F4DESCR=>HELP_ID_KIND_NAME
IV_INPUT_MAPPING = LT_INMAP
IV_OUTPUT_MAPPING = LT_OUTMAP
iv_trigger_submit = abap_true
* IV_F4TITLE = ' '"# EC NOTEXT
endmethod.
But i don't know the Relation_Name which i can get the vender's information.
Another question : i want to trigger the code 'get_related_entities' when i click the search help,
How can i do that ?
Thanks.
Oliver.
Edited by: oliver.yang on Aug 7, 2009 5:56 AM -
How to create a new row for a VO based on values from another VO?
Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA -
Creating Variable with Replacement Path to get value from ANOTHER Variable
Hi all,
Is anyone has created the Variable with Replacement Path to get the value from another User Entry Variable, PLEASE ?
First created the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next created the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we should get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path for my requirement, PLEASE ?
The following is from help.sap..com:
Replace with Characteristic Value
Text and formula variables with the processing type Replacement Path can be replaced with a corresponding characteristic value. In the variable editor, on the General tab page, you specify under Reference Characteristic the characteristic that is to be referenced by the replacement. On the Replacement Path tab page, you can choose whether the variable is replaced with the From or the To Value and with the Key or the Name of the characteristic value. You can also specify the Offset Start and Offset Length for the output.
Replace with Variable
Characteristic value variables, hierarchy variables, text variables, and formula variables with the Replacement Path processing type can take their values from a different variable.
The following prerequisites need to be fulfilled:
Variable
● The variable must not be input-ready
● The variable must represent a single value
Source Variable
● The source variable must not be a hierarchy node variable
● The source variable must be input-ready
● The source variable must be available in the query
● The source variable must represent a single value or an interval
In the variable editor, on the Replacement Path tab page, you specify the source variable from which the value is to be determined. The value is either determined from the key, the external attribute of the key, the description, or the attribute value. You can specify an Offset Start and an Offset Length for the output here. The variable is replaced on the variable screen upon each data release.
Thanks,
Venkat.Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps... -
SSRS Parameter value from another parameter
Hello Everybody,
I have a parameter that I need to get it value from another parameter.
The first parameter @rdt is a date - 11/01/2012
The second parameter @mm is the year and month = 2012
I tried putting in a select inside the query but it did not work
SET @mm = (SELECT cast(year(@rdt) as char(4)) + cast(month(@rdt) as varchar(2)))
Then I put it as a default value inside the parameter and it still did not work
=cast(year(Parameters!rdt.Value) as char(4)) + cast(month(Parameters!rdt.Value) as varchar(2))
Any ideas or suggestions ?
Thanks in advanceHi Msj99,
I have tested the expression provided by
Visakh16 that it works fine , you will get the value as Integer type "YYYYMM", you can also use expression as below to get the string type of @mm (YYYYMM):
=Year(Parameters!rdt.Value)&Month(Parameters!rdt.Value)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Field with a default value from another field
I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
Topic
Acrobat 5 - field with default value of another field
Ben PF - 03:31am Mar 23, 2007 Pacific
How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
I've tried, but I just can't figure it out!
Any help much appreciated.
Ben
| Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages
2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
This, or some variation of this, should work:
if(this.getField("date2").value == ""{
this.getField("date2").value = this.getField("date1).value;
| Bookmark back to top
Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
Thanks very much.
I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
Thanks for your help.
BenOkay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
Put this:
this.getField("myField2").value = event.target.value;
Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes. -
How to derive a variable value from another variable of a different IO?
Hi Gurus,
I am aware that using BEx variables and Customer Exit you are able to derive a variable value from another variable of the same infoobject (for example, Fiscal Year/Period (0FISCPER) and Calendar Day (0CALDAY)).
However, is is possible, using the same approach to derive a variable value from another variable that is in a different InfoObject? (for example, Input Fiscal Year/Period (0FISCPER) but derive Output of Required Start Date (0REQSTDAT))?
There are 2 BEx variables involved,
1) A user entry variable that is restricted in 0FISCPER
2) A customer exit variable that is restricted in ZREQSTDAT
In CMOD under EXIT_SAPLRRS0_001, Include ZXRSRU01, the code (I assume, correct me if I'm wrong) should perform 3 functions in I_STEP = 2,
1) After the pop up, capture user entry of Fiscal Year/Period
2) Identify or convert Fiscal Year/Period to Calendar Day range (unsure on how to code this portion)
3) Use the Calendar Day to lookup on matching Required Start Date and display all Required Start Date that matches. (unsure on how to code on this portion)
Hope to hear your thoughts soon.
Regards,
EricHi Shanthi,
I've made the necessary adjustments. The only difference in my code is,
Instead of,
If I_VNAM = 'ZREQSTDAT'
I use,
CASE I_VNAM.
Instead of,
PARAMETERS: ZFISCPER TYPE /BI0/OIFISCPER.
ZYEAR = ZFISCPER(4).
ZMM = ZFISCPER+4(3).
I use ,
This is the Customer Exit Variable in ZREQSTDAT
WHEN 'ZRSD_CX'.
The loop I use for the User Entry Variable in 0FISCPER-ZFYP_IN
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZFYP_IN'.
IF SY-SUBRC = 0.
CLEAR L_S_RANGE.
ZYEAR = LOC_VAR_RANGE(4).
ZMM = LOC_VAR_RANGE+4(3).
The codes were checked with no errors.
However, when I input the Fiscal Year/Periods and hit 'Execute'. The report went blank, not sure what is the cause. I've tried it several times. No error message appeared.
Regards,
Eric
Maybe you are looking for
-
I need function keys for the warehousing system I run for work. I am logged on via VPN and Pocketcloud app in a "PC like" desktop. The program is E-term by Eclipse. Hoping to be able to use wireless keyboard to do this. No luck so far.
-
Check Receipt customer in FBCJ error in creating present checks
Hi I am using check receipt tab for the customer payments in cash journal fbcj. Entering the transaction details of business transaction"Customer payment", check number, check issuer, bank key, customer number and profit center fileds. after entering
-
How to track the information/error of java code while compiling.
Hi, I want all the information or errors of java code during compilation. So that I can use this information or I can show these errors with different style. How to get the java syntax errors?
-
Trouble with Simple XNET CAN Example...
I am trying to get a simple XNET CAN write frame going. Here is the VI I created... I keep getting this: I looks like I have a frame set up, so what else could be the issue?
-
ITunes 11 [Songs view] - Sort on artist, then year
I just downloaded iTunes 11 and there seem to be some features missing compared to iTunes 10. One of the most important issues is that in the "Songs" view, I cannot seem to sort on (1) Artist and (2) Album year. It seems that iTunes is automatically