SSRS Parameter value from another parameter

Hello Everybody,
I have a parameter that I need to get it value from another parameter.
The first parameter @rdt is a date - 11/01/2012
The second parameter @mm is the year and month = 2012
I tried putting in a select inside the query but it did not work
SET @mm = (SELECT cast(year(@rdt) as char(4)) + cast(month(@rdt) as varchar(2)))
Then I put it as a default value inside the parameter and it still did not work
=cast(year(Parameters!rdt.Value) as char(4)) + cast(month(Parameters!rdt.Value) as varchar(2))
Any ideas or suggestions ?
Thanks in advance

Hi Msj99,
I have tested the expression provided by
Visakh16 that it works fine , you will get the value as Integer type "YYYYMM", you can also use expression as below to get the string type of @mm (YYYYMM):
=Year(Parameters!rdt.Value)&Month(Parameters!rdt.Value)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Similar Messages

Pass parameter value to another parameter.... User query in user parameter

Hello everyone, any help would be greatly appreciated.
Problem:
My report currently has 5 user parameters (3 Number, 2 Characters). I have an after parameter trigger that evaluates all the parameters to see which one has any value and then creates the “where clause”. Below is an example of two of the 5 parameters.
The function works fine, I just cut out all the other stuff for this issue.
function AfterPForm return boolean is
IF :P_JOB_ID is not null then
:P_WHERE_CLAUSE := 'where Job_num = :P_JOB_ID';
ELSIF :P_QUES_DESC is not null then
:P_WHERE_CLAUSE := 'where DESCRIPTION like :P_QUES_DESC’;
ELSE :P_WHERE_CLAUSE := ‘where JOB_NUM = 0';
The “P_WHERE_CLAUSE” is used as follows in a query.
Select job_num
from PROMOTION
&P_W_CLAUSE
Issue:
The query result can be anywhere from 1 to 50 job_num’s. I need to show the end user running this report the values (job_num) in a drop down list. They in turn will select one job_num which will be used to run the report. I tried putting the Select job_num from PROMOTION &P_W_CLAUSE in a User Parameter but that does not work. I get an error. I feel that I am approaching this the wrong way. Because in the end I would end up with two queries, one for the Select statement containing the P_W_CLAUSE and another with the final report. This issue is sort of like cascading prompt where the values from one (or more) parameters are used in the select of another user parameter which in turn the value selected will be used in the final report. Also this report will be used somewhere between 50 - 75 times per day so storing the values in a temp table might not work.

Sorry,
as I know depending parameters like you want are not possible in Reports. You can use one reports as parameter-report-only to use a second as your original report, but this is not perfect. Or use a tool like Application Express (which is able to have depending fields) in front of reports to build your parameter forms.
Regards
Rainer

Unable to get parameter values from a remote database

I am linking to a remote database view via a synonym in Oracle and trying to retrieve parameter values from it. The username and password are the same for the local and remote database and I can run the SQL query using SQL plus against the database and values are returned. However, when I try and run the same query in Crystal Reports (XI) I receive an Oracle error:
"An attempt was made to connect or log in to a remote database using a connection description that could not be found.
Action:
Specify an existing database link. Query the data dictionary to see all existing database links. See your operating system-specific Net8 documentation for valid connection descriptors. "
How can it be that Crystal cannot run the query when it is valid in SQL plus?
Any tips/info would be appreciated.
many thanks
Claire
Oracle is version 10

When running one of the reports in VS.Net this is the error I receive:
"A first chance exception of type 'System.Runtime.InteropServices.COMException' occurred in crystaldecisions.crystalreports.engine.dll
Additional information: Failed to retrieve data from the database.
Details: [Database Vendor Code: 2019 ]
Failed to retrieve data from the database.
Error in File C:\DOCUME1\CLAIRE1.REE\LOCALS~1\Temp\{0C6C6DD5-B958-4E10-A2AA-928C58E1B7CE}.rpt:
Failed to retrieve data from the database.
Details: [Database Vendor Code: 2019 ]"
When running the same report in Crystal Reports designer I receive this error message:
"Prompting failed with the following error message: 'List of Values failure: fail to get values. [Cause of error: Failed to retrieve data from the database. Details: [Database Vendor Code: 2019]. Failure to retrieve data from the database. Error in File UNKNOWN.RPT. Failure to retrieve data from the database. Details: [Database Vendor Code: 2019]]'.
Error source: prompt.dll Error code: 0x8004380D"
So this one is also failing in the designer.
All the parameters in the main report are static and the ones in the subreport are passed in from the main report.

Problem in getting parameter value from selection screen in web dynpro abap

Hi,
I am facing problem in getting parameter value from selection screen.
Please find my code below:
DATA LT_PAR_ITEM TYPE IF_WD_SELECT_OPTIONS=>TT_SELECTION_SCREEN_ITEM.
FIELD-SYMBOLS:<FS_PAR_ITEM> LIKE LINE OF LT_PAR_ITEM,
                             <FS_OBJ_USAGE>    TYPE REF TO data.
WD_THIS->M_HANDLER->GET_PARAMETER_FIELDS( IMPORTING ET_FIELDS = LT_PAR_ITEM ).
LOOP AT LT_PAR_ITEM ASSIGNING <FS_PAR_ITEM>.
    CASE <FS_PAR_ITEM>-M_ID.
      WHEN `OBJ_USAGE`.
         ASSIGN <FS_PAR_ITEM>-M_VALUE->* TO <FS_OBJ_USAGE>.
[ Here, sy-subrc is 4, <FS_OBJ_USAGE> is not assigning.]
    ENDCASE.
ENDLOOP.
So, can any one solve this problem.
Thanks in advance,
Radhika

Hi Radhika,
Try using GET_RANGE_TABLE_OF_SEL_FIELD...
Please Refer below code..
   DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
                       WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
Thanks,
Regards,
Kiran

How to omit parameter values from exceptions thrown by the JDBC driver

Is there a way to get the Oracle JDBC driver to omit the parameter values from the message when it throws an exception?
We have an application that persists credit cards and when an exception is thrown by the driver, it's including the credit card number in the error message, which ultimately gets logged by the application. There are too many layers and locations, including OpenJPA, Spring, and our own application, where we'd have to massage the error data to remove that card number.
For example, we get the following exception:
Caused by: org.apache.renamed.openjpa.lib.jdbc.ReportingSQLException: ORA-20104: Permission denied
ORA-06512: at "PROTEGRITY.PTY", line 57
ORA-06512: at "PROTEGRITY.PTY", line 383
ORA-06512: at "SUBSDSYS.TORDERPAYMENT_UPD", line 16
ORA-04088: error during execution of trigger 'SUBSDSYS.TORDERPAYMENT_UPD'
{prepstmnt 6603044
UPDATE PAYMENT
SET CARD_HOLDER_NAME = ?, CARD_TYPE = ?, EXPIRY_MONTH = ?, EXPIRY_YEAR = ?, GATEWAY = ?
WHERE UIDPK = ?
[params=(String) Test Test, (String) VISA, (String) 03, (String) 2012, (String) CREDITCARD, (long) 106901]} [code=20104, state=72000]
at org.apache.renamed.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingConnectionDecorator.java:192)
at org.apache.renamed.openjpa.lib.jdbc.LoggingConnectionDecorator.access$800(LoggingConnectionDecorator.java:57)
The actual content of the message appears to come from the JDBC driver, not OpenJPA.
This particular example doesn't show the card number, but only exposed that possibility as a risk.
BTW: before you ask, for PCI compliance we're using a database layer service to encrypt the card numbers before they're stored in the table.
Thanks much.

[email protected] wrote:
The actual content of the message appears to come from the JDBC driver, not OpenJPA.Wrong. This is a dump of parameters used to execute a query - and it comes from some upper layer, not the JDBC driver.
I would start looking at the source code starting here:
org.apache.renamed.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingConnectionDecorator.java:192)

Get parameter value from PLSQL portal Item

Hi,
i have some page link like :
http://server:7777/portal/page?...&myparameter=test
I don't know how to get myparameter. I want to access this parameter value in a PlSql portal Item in this page
can somenone help me ?
is there an API to get those parameters?
thanks in advance
Joao

If do you want to get a parameter value from an item, you'll need to construct a procedure that receive your parameter value and configure your item to call this procedure.
But If you want to get a parameter from a portal page, first you need to configure the parameter in page properties, construct a portlet and configure "function describe_parameters" to get the parameter and work your parameter in "procedure show".

Creating Variable with Replacement Path to get value from ANOTHER Variable

Hi all,
    Is anyone has created the Variable with Replacement Path to get the value from another User Entry Variable, PLEASE ?
First created the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next created the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we should get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path for my requirement, PLEASE ?
The following is from help.sap..com:
Replace with Characteristic Value
Text and formula variables with the processing type Replacement Path can be replaced with a corresponding characteristic value. In the variable editor, on the General tab page, you specify under Reference Characteristic the characteristic that is to be referenced by the replacement. On the Replacement Path tab page, you can choose whether the variable is replaced with the From or the To Value and with the Key or the Name of the characteristic value. You can also specify the Offset Start and Offset Length for the output.
Replace with Variable
Characteristic value variables, hierarchy variables, text variables, and formula variables with the Replacement Path processing type can take their values from a different variable.
The following prerequisites need to be fulfilled:
Variable
●      The variable must not be input-ready
●      The variable must represent a single value
Source Variable
●      The source variable must not be a hierarchy node variable
●      The source variable must be input-ready
●      The source variable must be available in the query
●      The source variable must represent a single value or an interval
In the variable editor, on the Replacement Path tab page, you specify the source variable from which the value is to be determined. The value is either determined from the key, the external attribute of the key, the description, or the attribute value. You can specify an Offset Start and an Offset Length for the output here. The variable is replaced on the variable screen upon each data release.
Thanks,
Venkat.

Hi Eve,
It is possible to connect the 2 queries using a Replacement Path characteristic variable. You would need to create the variable on the char whose values you want to pass from Q1 to Q2. The variable will be of type replacement path and you will need to enter the name of Q1 from which it will get the values. Make sure that you include this char in the query definition of Q1 and Q2. In Q2 you will restrict the characteristic using this variable. DO not use this variable (replacement path) in Q1.
In your query properties check if you have turned on the checkmark for Release for OLE DB for OLAP (3rd tab). If the check mark is there, then remove it.
We are using the scenario in a couple of places, and it works very well.
Hope this helps...

How to create a new row for a VO based on values from another VO?

Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29

Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA

Variable type Hierarchy, how to get the value from another similar variable

Hi.
We have created a variable, type hierarchy (using ORGEH hierarchy in HR based on 0ORGUNIT). Let's call this VAR1. We want to fill this with an User Exit, beacuse we want VAR1 to have the value from another variable, VAR2, which is also type hierarchy (and based on the same characteristic).
However, when we program this user exit and use the VAR1 afterwards, it just behaves as if we have a single characteristic value and not a node value. As a result, we just get posts which do have the 'parent itself' as characteristic value, and none of the subnodes... Any hints as to what we can do in our User exit to get the value passed over from VAR2 to VAR1 as a node value? Is there any spesific syntax to be used here that we are missing? ( The VAR1 and VAR2 are both defined as hierarchy variables, we have double checked...).

Hi,
are you on BI7.0? There you can create variables type replacement path and get the value out from a different variable without any coding.
regards
Cornelia

Field with a default value from another field

I need to populate a field as the default value from another field that the user inputs. I've tried the scripting that I found from the below Topic in the Archived Forums, but I'm not able to make it work. I've tried numerous variations and still to no avail. I tried to make the scripting work in Acrobat 6 and then decided that maybe I needed to upgrade, so I'm now trying it in Acrobat 8 with no results. Can anyone help?
Topic
Acrobat 5 - field with default value of another field
Ben PF - 03:31am Mar 23, 2007 Pacific
How can I have a field date2 which has the default value of field date1, but which can be edited by the user if necessary without changing the value of date1.
I've tried, but I just can't figure it out!
Any help much appreciated.
Ben
| Back to Topic List | Bookmark | Subscribe
To start a NEW discussion click on the Back to Topic List link and select Add Topic.
If you are in an archive forum please go up to the main topic list (archives are read only).
Messages
2 messages. Displaying 1 through 2.
First Previous Next Last Show All Messages
Gene Dianoski - 5:22am Mar 23, 07 PST (#1 of 2)
This, or some variation of this, should work:
if(this.getField("date2").value == ""{
this.getField("date2").value = this.getField("date1).value;
| Bookmark back to top
Ben PF - 6:49am Mar 23, 07 PST (#2 of 2)
Thanks very much.
I put it in at document level to start, but it didn't run the script automatically when date1 was first filled in, so I have put it in as a mouse exit action in date1 and it works a treat.
Thanks for your help.
Ben

Okay forget what I posted above and lets start over. Go to your first field and under Properties -> Actions Tab -> Select Trigger -> On Blur Run A JavaScript.
Put this:
this.getField("myField2").value = event.target.value;
Make sure that you replace ("myField2") with the actual name of your second field. I just tested this and it works for Acrobat version 6.
I haven't been doing as much javascripting as I used to, so sometimes I too make some basic mistakes.

Id from one table showing value from another

I have an article id (rs_comments.id_com) but I would like it
to take this data and collect the value from another table.
I have joined the two tables with:
SELECT * FROM blg_comment_com INNER JOIN blg_article ON
idart_com=id_art
WHERE valid_com=1
ORDER BY date_com DESC
rs_comments.idart_com needs to be equal to rs_comments.id_art
displaying the value from rs_comments.title_art
How would I go about doing this. There only seems to be an
option in DW to do this with a dynamic list/menu but I just want to
display the text without option to change it.
Any help much appreciated.

i was stupid. The answer was staring me in the face. No
wonder no-one bothered to reply...

How to derive a variable value from another variable of a different IO?

Hi Gurus,
I am aware that using BEx variables and Customer Exit you are able to derive a variable value from another variable of the same infoobject (for example, Fiscal Year/Period (0FISCPER) and Calendar Day (0CALDAY)).
However, is is possible, using the same approach to derive a variable value from another variable that is in a different InfoObject? (for example, Input Fiscal Year/Period (0FISCPER) but derive Output of Required Start Date (0REQSTDAT))?
There are 2 BEx variables involved,
1) A user entry variable that is restricted in 0FISCPER
2) A customer exit variable that is restricted in ZREQSTDAT
In CMOD under EXIT_SAPLRRS0_001, Include ZXRSRU01, the code (I assume, correct me if I'm wrong) should perform 3 functions in I_STEP = 2,
1) After the pop up, capture user entry of Fiscal Year/Period
2) Identify or convert Fiscal Year/Period to Calendar Day range (unsure on how to code this portion)
3) Use the Calendar Day to lookup on matching Required Start Date and display all Required Start Date that matches. (unsure on how to code on this portion)
Hope to hear your thoughts soon.
Regards,
Eric

Hi Shanthi,
I've made the necessary adjustments. The only difference in my code is,
Instead of,
If I_VNAM = 'ZREQSTDAT'
I use,
CASE I_VNAM.
Instead of,
PARAMETERS: ZFISCPER TYPE /BI0/OIFISCPER.
ZYEAR = ZFISCPER(4).
ZMM = ZFISCPER+4(3).
I use ,
This is the Customer Exit Variable in ZREQSTDAT
WHEN 'ZRSD_CX'.
The loop I use for the User Entry Variable in 0FISCPER-ZFYP_IN
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
      WHERE VNAM = 'ZFYP_IN'.
    IF SY-SUBRC = 0.
        CLEAR L_S_RANGE.
ZYEAR = LOC_VAR_RANGE(4).
ZMM = LOC_VAR_RANGE+4(3).
The codes were checked with no errors.
However, when I input the Fiscal Year/Periods and hit 'Execute'. The report went blank, not sure what is the cause. I've tried it several times. No error message appeared.
Regards,
Eric

Default value from another table in dummy field on a portal form ..

A form based on a table :
id
name
xx_id
I created a dummyfield on the form in which i would like the
name corresponding to xx_id -> I would like to fetch a value
from another tabel into a dummy field.
thanx
Trine Hindsholm

I could do this task by creating the form manually - is there anyway I can modify the insert for a form created by the wizard?

Get the value from another node.

Hi, expert
In the component BT131I_SLS , I create a enhanced attribute in the node: BT131I_SLS/Details BTADMINI
Then i define the GET-V method to create a search help for the attribute.
Now , i want to pass a BP number to the search help function to filter the data.
We need to get the BP number as below:
When create a order, we input the product id ,
then there will be a popup window , we can choose a vendor in the window.
The vendor number is the value which we want to pass to the search help.
How can i do that ?
Thanks.
Oliver.

Hi , expert
Can i use the 'get_related_entities' to get the value I need?
I think maybe i can use the method to get the value from another view which is not in my component.
Now I write codes in the GET-V method, as below:
method GET_V_ZZZFLD000011.
DATA:
    LS_MAP    TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING,
    LT_INMAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB,
    LT_OUTMAP TYPE IF_BSP_WD_VALUEHELP_F4DESCR=>GTYPE_PARAM_MAPPING_TAB.
DATA: LV_PARTNER_NO TYPE CRMT_PARTNER_NUMBER.
data: lr_current TYPE REF TO if_bol_bo_property_access,
        lr_entity TYPE REF TO cl_crm_bol_entity,
        lr_col     TYPE REF TO if_bol_bo_col,
        value      TYPE string.
lr_entity ?= me->collection_wrapper->get_current( ).
lr_col = lr_entity->get_related_entities( iv_relation_name = 'Relation_Name' ).
lr_current = lr_col->get_current( ).
* value =
LS_MAP-CONTEXT_ATTR = 'EXT.ZZZFLD000011'.
LS_MAP-F4_ATTR      = 'LGORT'.
APPEND LS_MAP TO: LT_OUTMAP.
* LS_MAP-CONTEXT_ATTR = 'EXT.ZZZFLD000011'.
* LS_MAP-F4_ATTR      = 'LANGU'.
* APPEND LS_MAP TO LT_INMAP.
IF SY-SUBRC = 0.
ENDIF.
CREATE OBJECT RV_VALUEHELP_DESCRIPTOR
    TYPE
      CL_BSP_WD_VALUEHELP_F4DESCR
    EXPORTING
      IV_HELP_ID                  = 'ZHELP_ZSAKCDD'
*      IV_HELP_ID_KIND             = IF_BSP_WD_VALUEHELP_F4DESCR=>HELP_ID_KIND_COMP
      IV_HELP_ID_KIND             = IF_BSP_WD_VALUEHELP_F4DESCR=>HELP_ID_KIND_NAME
      IV_INPUT_MAPPING            = LT_INMAP
      IV_OUTPUT_MAPPING           = LT_OUTMAP
      iv_trigger_submit           = abap_true
*      IV_F4TITLE                  = ' '"#    EC NOTEXT
endmethod.
But i don't know the Relation_Name which i can get the vender's information.
Another question : i want to trigger the code 'get_related_entities' when i click the search help,
                               How can i do that ?
Thanks.
Oliver.
Edited by: oliver.yang on Aug 7, 2009 5:56 AM

Passing parameter value from one script to another in job chain steps

Hi all,
We have a scenario where in we have a job chain with two steps
1-Step 1 contains a script which fetches value from database to the script parameter(in/out) - PAR_DB_VALUE
2-Step 2 contains another script which uses the value of the parameter PAR_DB_VALUE and has to assign to another parameter in the script 2 called PAR_FETCHED_VALUE(in)
How to pass the value of PAR_DB_VALUE to PAR_FETCHED_VALUE which are parameters in two different steps
Please help
Thanks and Regards
Raj

Hi,
You can achieve this as follows (CPS version 6 & 7):
- Edit the chain
- Go to the second step, to the parameters of the script call in that step
- Go to the parameter (PAR_FETCHED_VALUE) that you want to be filled by the parameter of the first step
- choose "Chain value" in the detail screen for the parameter, and select the desired out parameter from the drop down
Note that both parameters need to be of the same type for this to work.
Regards,
Anton.

SSRS Parameter value from another parameter

Similar Messages

Maybe you are looking for