Find a value and the position from the string.

Hi All,
Actually I have one table called test and it got 2 columns in it one is number and the other one is varchar2. now I need to find a particular value from a string and also the position of first position character of that searched value. For example, I need to search “Small” from the string “This is the small value” and also the position of that letter “S”.
The result should be ----
Value Position
Small 14
hare krishna
Alok

use substr(), instr() like this:
with
  test as
      select 1 as num, 'This is the small value' as str from dual union all
      select 2 as num, 'This is the very-very small_value' as str from dual
select num, str,
       substr(substr(str, instr(str, 'small', 1, 1)), 1,
                          nvl(nullif(instr(substr(str, instr(str, 'small', 1, 1)), ' ', 1, 1),0),
                                    length(str)) - 1) as value,
       instr(str, 'small', 1, 1) as position
  from test
Query finished, retrieving results...
NUM                  STR                     VALUE      POSITION
  1   This is the small value             small               13
  2   This is the very-very small_value   small_value         23
2 row(s) retrieved

Similar Messages

  • How find print program and form name from the spool list

    Hi,
          I have a requirement to find print program and form name from the spool list.
    I got the list of programs and forms from TNAPR table, I also want to find out any custom program sending the form directly to the spool.
    Cheers
    Sam

    Hi
    Try TSP01-Suffix2
    Regards
    Raj

  • I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

    I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
    Can anyone please advise what I am doing wrong?

    Hi LowLuster
    Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

  • Can no longer copy and paste filenames from the finder to other Apps?

    Did Leopard remove the ability to copy a file or folder name in the finder, and then paste that into a text editor?
    I have a need to copy file and folder names from the finder, then paste those names into BBEdit. I've been doing this for years. Now with Leopard, I can copy the file or folder names, and even see them in the clipboard of the Finder. But when I try to paste them into BBEdit, TextEdit, Word, Pages... nothing happens. And Paste is grayed out in the target application. As if I had never copied the item in the first place.
    Can anyone else copy filenames in the finder? Or do I have a system-specific problem?

    Never mind. Apparently there was something going wrong with the Finder. I ran Onyx, and things are back to normal now. I was concerned because I actually saw similar but not identical behavior on two Leopard machines. Running Onyx on the 2nd one now.

  • Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I

    Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I want the solution quickly

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put ab

    I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs.  What am I missing?
    Thanks,
    upsjdris

    Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
    You can set Aperture to import raw, jpeg, or raw&jpeg.
    If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
    Photos > Use Raw as original.
    Regards
    Léonie

  • There was a button/plug in that alloyou to search and dowmload MP3 from the tool bar it is no longer there how can I find it?

    There was a button/plug in that alloyou to search and dowmload MP3 from the tool bar it is no longer there how can I find it?

    The add-on you are looking for may no longer be available.
    Do you remember its name?
    Go to the '''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''' {web link}
    (There’s a lot of good stuff here) and search for what you want.

  • My 3 apple products, an imac, a macbook air and a macbook lost their contact with their external hard disks. They were LaCie make. And every time I turn my laptops, I find the positions of the keys on their  keyboards changed.  Why is Apple silent?

    After the latest apple IOS upgrade my 3 apple products, an imac, a macbook air and a macbook, lost their contact with their external hard disks. They were LaCie make. And every time I turn my laptops, I find the positions of the keys on their  keyboards changed.  Why is Apple silent? There are so many people complaining about this issue and expecting Apple to correct this issue that they have created.

    Probably because it's not an Apple issue. I have Lacie EHD's connected to my MBAir and iMac, all work perfectly on Mavericks. In addition I don't have any keyboard issues on any of my Apple products. BTW IOS is only for IOS devices such as iPads, iPods and iPhones, Macs use OS X. The two OS's are seperate  products designed to run on seperate products.

  • Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?

    Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?
    I have been looking at my data at the position indicated by the function as a peak, and it is correct at that place the wave has its peak, but the value provided by the function is higher than the actual value at that point.
    Attachments:
    Test.jpg ‏53 KB

    The help makes it clear that the VI will make a quadratic fit to the data, so the locations are not integers (i.e. not aligned with you exact data). From that analysis, the peak is between two of your points, and slightly above the neighboring data.
    See the coercion dot. Make the "locations" array DBL (Why did you change it to I64, that makes no sense at all!)
    Quote from the help:
    "Locations contains the index locations of all peaks or valleys detected in the current block of data. Because the peak detection algorithm uses a quadratic fit to find the peaks, it actually interpolates between the data points. Therefore, the indexes are not integers. In other words, the peaks found are not necessarily actual points in the input data but may be at fractions of an index and at amplitudes not found in the input array."
    All clear?
    LabVIEW Champion . Do more with less code and in less time .

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

  • I updated to io7 and the photos from the welcome screen and the wallpaper are like too much zoomed thank you

    I updated to io7 and the photos from the welcome screen and the wallpaper are like too much zoomed thank you

    View your landscape photo with your phone in the upright position.
    Tap on the photo once so the background goes black
    Take a screenshot now by pressing the round button and the top button together.
    Go back into your photos and find this new screenshot - then apply this as your wallpaper. You should be able to resize it :)

  • How to find out the user from the Jobs queue in Report server

    Hello All!
    I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has a column under "Job Owner". But it invariantly shows it is "rwuser". So is there a way to find out which user has scheduled which job?
    Regards
    Shobha

    hi,
    The below tables will give only the name .
    USER_ADDRS
    USER_ADDR
    USER_ADDRP
    USR02
    i think you need email address .
    you can use this Tcode : su01d
    and give the user name and excute it
    i hope it will help you.
    Ram
    Edited by: Ram velanati on Jun 30, 2008 6:57 PM

  • I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

    I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
    Attachments:
    try2.txt ‏2 KB
    read_array.vi ‏21 KB

    The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
    Here are some of your choices to fix your problem.
    1. Change the source file to a tab delimited file. Your VI will then run as is.
    2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
    3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
    Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
    Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

  • Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    Hey there Logic Pro21,
    It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Verify that your computer meets the system requirements for Logic Pro X
    See Logic Pro X Technical Specifications.
    Test using the computer's built-in audio hardware
    If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
    Start Logic with a different project template
    Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
    Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Isolate an issue by using another user account
    For more information see Isolating an issue by using another user account.
    Reinstall Logic Pro X
    Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
    In the Finder, choose Applications from the Go menu.
    Locate the Logic Pro X application and drag it to the trash.
    Open the Mac App Store
    Click the Purchases button in the Mac App Store toolbar.
    Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
    Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
    Click Install to download and install Logic Pro X.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • How to get the values of Select-options from the screen.

    The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

    Hi,
    Refer this following code..this will solve your problem...
    "Following code reads value entered in s_po select options and willprovide search
    "help for s_item depending upon s_po value.
    REPORT TEST.
    TABLES : ekpo.
    DATA: BEGIN OF itab OCCURS 0,
    ebelp LIKE ekpo-ebelp,
    END OF itab.
    SELECT-OPTIONS   s_po FOR ekpo-ebeln.
    SELECT-OPTIONS s_item FOR ekpo-ebelp.
    INITIALIZATION.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
      DATA:
      dyn_field TYPE dynpread,
      temp_fields TYPE TABLE OF dynpread,
      zlv_dynpro TYPE syst-repid.
      zlv_dynpro = syst-repid.
      CALL FUNCTION 'DYNP_VALUES_READ'
        EXPORTING
          dyname     = zlv_dynpro
          dynumb     = syst-dynnr
          request    = 'A'
        TABLES
          dynpfields = temp_fields
        EXCEPTIONS
          OTHERS     = 0.
      LOOP AT temp_fields INTO dyn_field.
        IF dyn_field-fieldname EQ 'S_PO-LOW'.
            SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
            WHERE ebeln EQ dyn_field-fieldvalue.
            EXIT.
        ENDIF.
      ENDLOOP.

Maybe you are looking for

  • How to change document dimensions and scale image proportionally?

    Hi there, I've created over a hundred files in Photoshop for placement in a book I'm making with software provided by the printer that uses templates of set sizes. My big mistake was to make all the files in Photoshop at A4 size (21cm X 29.7cm) where

  • Extract attachment from input sream?

    hi, how can i retrieve image/attachment from input stream. I am getting: <?xml version="1.0" ?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns1="http://www.csapi.org/s

  • Wording in Google doesn't work

    As most of you already know I tried to design a website using Mrsite. When you enter my domain name up comes the description I put in Mrsite and not iweb. I did transfer my domain from them and I can still make changes in Mrsite especially in the are

  • Where can I find com.sap.aii.proxy.xiruntime.core.*  library?

    Hi all, some of you now where is the .JAR that contains the com.sap.aii.proxy.xiruntime.core.* api's? Generated java proxies from PI 7.0 are using many classes at this package, and I couldn't find it... some tip? Thank you! regards! roberti

  • Exporting table data to .csv file

    How to export the table data (this table is having 18 million records) to .csv file. using SQL Developer and PL/SQL deveoloper it is taking too long time to complete. Please let me know is there any faster way to complete this task. Thanks in advance