Find BDC error in Zprogram
Hi guys,
Anybody have program or utility to pick up the BDC Errors from Zprograms.
I want to know number of BDC errors(Due to Screen change/Field change/etc) exists in set of zprograms.
Appreciable if Listing of BDC errors and error count can be produced by it.
reference please.
Thanks.
Ambi.
Hi,
better use :
CALL TRANSACTION tcode USING bdcdata MODE mod MESSAGES INTO etab.
if sy-subrc <> 0.
-> analyse error-table etab
A.
Similar Messages
-
Hello guys,
I recently modified a BDC program and I configured it's mode to be 'E' so when errors are present,pop up windows are shown. Unfortunately I can't seem to find the error. I will post below the code. What I did with the code was to clear the value of anep-anbtr to no value. help would really be appreciated. Thanks guys!
FORM GENERATE_BDC_DATA_ABAA.
DATA: I_ANBTR LIKE ANEP-ANBTR.
DATA: C_ANBTR(16), C_ANBTR2(16), C_DMBTR(16).
PERFORM BDC_DYNPRO USING 'SAPMA01B' '0100'.
PERFORM BDC_FIELD USING:
'BDC_OKCODE' '/00',
'ANBZ-BUKRS' 'GLOB',
'ANBZ-ANLN1' IT_REC-ANLN1,
'ANBZ-ANLN2' IT_REC-ANLN2,
'ANEK-BLDAT' IT_REC-BLDAT,
'ANEK-BUDAT' IT_REC-BUDAT,
'ANBZ-PERID' IT_REC-PERID,
'ANBZ-BWASL' IT_REC-BWASL.
PERFORM BDC_DYNPRO USING 'SAPMA01B' '0110'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.
PERFORM BDC_FIELD USING 'ANBZ-DMBTR' IT_REC-DMBTR.
PERFORM BDC_FIELD USING: 'ANBZ-BZDAT' IT_REC-BUDAT,
'ANEK-SGTXT' IT_REC-SGTXT.
"I_ANBTR = '0'. "IT_REC-DMBTR * -1.
perform bdc_dynpro using 'SAPMA01B' '0285'. " '0600'.
*AVH
clear anep-anbtr.
perform bdc_field using 'BDC_CURSOR'
'ANEP-ANBTR'.
perform bdc_field using 'BDC_OKCODE'
'=AUSF'.
*AVH
clear anep-anbtr.
PERFORM BDC_DYNPRO USING 'SAPMA01B' '0285'. " '0600'.
*AVH
clear anep-anbtr.
PERFORM BDC_FIELD USING 'BDC_CURSOR' 'ANEP-ANBTR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=AUSF'.
PERFORM BDC_FIELD USING 'ANEP-ANBTR' '0'.
*AVH
clear anep-anbtr.
PERFORM BDC_DYNPRO USING 'SAPMA01B' '0110'.
PERFORM BDC_FIELD USING:
'BDC_OKCODE' '=UPDA',
'ANBZ-DMBTR' IT_REC-DMBTR,
'ANBZ-BZDAT' IT_REC-BUDAT,
'ANEK-SGTXT' IT_REC-SGTXT.
PERFORM BDC_DYNPRO USING 'SAPMA01B' '0285'. " '0600'.
*AVH
clear anep-anbtr.
PERFORM BDC_FIELD USING:
'BDC_CURSOR' 'ANEP-ANBTR',
'BDC_OKCODE' '=AUSF'.
PERFORM BDC_FIELD USING 'ANEP-ANBTR' '0'.
*AVH
clear anep-anbtr.
PERFORM BDC_DYNPRO USING 'SAPMA01B' '0285'. " '0600'.
*AVH
clear anep-anbtr.
PERFORM BDC_FIELD USING:
'BDC_CURSOR' 'ANEP-ANBTR',
'BDC_OKCODE' '=AUSF'.
PERFORM BDC_FIELD USING 'ANEP-ANBTR' '0'.
*AVH
clear anep-anbtr.
PERFORM BDC_DYNPRO USING 'SAPMA01B' '0110'.
PERFORM BDC_FIELD USING:
'BDC_OKCODE' '=UPDA'.
ENDFORM. " GENERATE_BDC_DATA_ABAAI just know that it has an error because the BDC 'mode' is 'E'. And yes, the program used call transaction. So when I run the program and the transaction that is being called shows up, the ok-code pop up window shows up. If you review my code, what i'm trying to do is to change the value of anep-anbtr in screen 285. Thanks a lot guys...
-
Dear Experts,
In BDC session method i have uploaded 2000 records from excel sheet to the transation pp02. But i got the message that 46 records are found error.
How to find the error records which are not uploaded in the transaction pp02.
regards
chinnaiya PHi,
If you are using 'Call Transaction' approach all your errors are in BDCMSGCOLL( Recall that all your error message texts are saved in T100 table)
Srini.. -
Not able to find the Error in code !
please help me to find the error in my code. When I Added x1~kondm its not giving anything i.e
*join t178t as x1
*on p1kondm = x1kondm
in the SQL part !
REPORT YINTERACTIVEPROGRAM01.
TABLES:VBAP,
VBPA,
VBRP,
VBRK,
KNA1,
ADRC,
TPAR,
TVKGG,
TVM1T,
TVM2T,
TVM3T,
TVM4T,
VBKD,
SZA1_D0100,
T178T.
TYPES:BEGIN OF TY_TAB,
VBELN LIKE VBAK-VBELN,
VKORG LIKE VBAK-VKORG,
ERDAT LIKE VBAK-ERDAT,
AUGRU LIKE VBAK-AUGRU,
BSTDK LIKE VBKD-BSTDK,
BSTDK_E LIKE VBKD-BSTDK_E,
spart like vbap-spart,
kondm like vbap-kondm,
waerk like vbap-waerk,
netwr like vbap-netwr,
kwmeng like vbap-kwmeng,
vkaus like vbap-vkaus,
land1 like vbpa-land1,
nrart like tpar-nrart,
vtext like tpar-vtext,
parvw like tpar-parvw,
name1 like adrc-name1,
name2 like adrc-name2,
name3 like adrc-name3,
name4 like adrc-name4,
ort01 like kna1-ort01,
pstlz like kna1-pstlz,
vtext like t178t-vtext,
END OF TY_TAB.
DATA: ITAB TYPE STANDARD TABLE OF TY_TAB WITH HEADER LINE.
parameters:salesno like itab-vbeln.
select s1~vbeln
s1~vkorg
s1~erdat
s1~augru
k1~BSTDK
k1~BSTDK_E
p1~spart
p1~kondm
p1~waerk
p1~netwr
p1~kwmeng
p1~vkaus
r1~land1
t1~nrart
t1~vtext
t1~parvw
n1~name1
n1~name2
n1~name3
n1~name4
c1~ort01
c1~pstlz
x1~vtext
into corresponding fields of table itab
from vbak as s1
join VBKD as k1
on s1vbeln = k1VBELN
join vbap as p1
on k1vbeln = p1vbeln
*join t178t as x1
*on p1kondm = x1kondm
join vbpa as r1
on p1vbeln = r1vbeln
join tpar as t1
on r1parvw = t1parvw
join ADRC as n1
on r1adrnr = n1addrnumber
join kna1 as c1
on r1land1 = c1land1
where k1vbeln = salesno and s1vbeln = salesno and p1~vbeln = salesno
and r1~vbeln = salesno.
loop AT ITAB.
WRITE : /(30)'VBELN: ', ITAB-VBELN,
/(30)'VKORG: ', ITAB-VKORG,
/(30)'ERDAT: ', ITAB-ERDAT,
/(30)'AUGRU: ', ITAB-AUGRU,
/(30)'BSTDK: ', ITAB-BSTDK,
/(30)'BSTDK_E:', ITAB-BSTDK_E,
/(30)'SPART: ', itab-spart,
/(30)'KONDM: ', itab-kondm,
/(30)'WAERK: ', itab-waerk,
/(18)'NETWR: ' , itab-netwr,
/(18)'KWMENG: ', itab-kwmeng,
/(10)'VKAUS:', itab-vkaus,
/(30)'LAND1:', itab-land1,
/(30)'NRART:', itab-nrart,
/(30)'PARVW:', itab-parvw,
/(30)'ADDR1:', itab-name1,
/(30)'ADDR2:', itab-name2,
/(30)'ADDR3:', itab-name3,
/(30)'ADDR4:', itab-name4,
/(30)'PSTLZ:', itab-pstlz,
/(30)'ORT01:', itab-ort01,
/(30)'Compiler desc:', itab-vtext.
uline.
ENDLOOP.
if sy-subrc <> 0.
write : / 'No data found'.
endif.hi,
u failed to check relationship between tables and as well as mandatory fields need to be checked, i noticed following
from vbak as s1
join VBKD as k1
on s1vbeln = k1VBELN
join vbap as p1
on k1vbeln = p1vbeln and k1posnr = p1posnr
*join t178t as x1
*on p1kondm = x1kondm
join vbpa as r1
on p1vbeln = r1vbeln <b>and p1posnt = r1posnr </b> join tpar as t1
on r1parvw = t1parvw
join ADRC as n1
on r1adrnr = n1addrnumber <b> * No relation between these two tables/b]
join kna1 as c1
on r1land1 = c1land1 <b>and r1kunnr = c1kunnr</b> <i>'here u need to check mandatory fields also</i>
where k1vbeln = salesno and s1vbeln = salesno and p1~vbeln = salesno
and r1~vbeln = salesno.
anyway, in performance point of view, writeing code with this much joins is not acceptable.
comeback if you need any further help
regards,
pavan
Message was edited by:
pavan kumar pisipati -
T-code or Table to find total errors in SAP APO like ST22 in ABAP
hi all,
Could please tell me the T-code or Table to find total errors in SAP APO like ST22 t-code in SAP ABAP.
Thanks.
Suryam SHello Venu,
Do you mean other functional errors?
You can check SLG1, /SAPAPO/C3, STAD
Best Regards,
R.Brahmankar -
How can I open my file after 'cannot find -filename-' error message?
OK, the bottom line is, InDesign crashes and I cannot recover my file. I get a 'Cannot find file' error message when I try to open the file.
I am using CS6 on a MacBookAir, OS X Yosemite.
I have tried finding the 'InDesignFileRecovery' folder, I cannot find it anywhere, it's not in my Library or Caches folder.
However, I do work in dropbox, so I just headed over to dropbox to recover from their 'previous versions'. It starts to get weird. There are lots of previous versions (I save very regularly) but when I download a previous version (that I know was fine) it downloads with a indd.txt extension. So I remove the txt extension and keep the indd and everything looks fine, but then that recovered file gives the same message. I tried renaming the recovered file and opening that, same 'cannot find file' error message.
I can open InDesign and open the file from the day before, but none of the dropbox earlier versions of that day's work. I am SO sick of this happening. It happened to me last week to, so far I have lost 20 hours work :-(
I have tried quitting InDesign and restarting the Mac, doesn't help. The only thing I can think of is to 'save as' every couple of hours, at least then hopefully I only lose 2 hours work.Thanks, when you say 'hidden by default' then how does one find it? I have already tried the path you mention and there is no sign of a cache folder with Adobe files. Spotlight doesn't reveal anything either.
-
Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…
Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Distiller "can't find font" error with MS-Gothic and ArialUnicodeMS
Hi. I'm tried to verify that Distiller (both 9 and XI) and PDF Generator (11.0 SP1) are able to generate PDFs from Postscript files using a variety of fonts. Almost every font that I tried works perfectly fine, but MS-Gothic and ArialUnicodeMS both fail with "can't find font" errors. I've verified font configurations in both Distiller and PDF Generator, and lots of other fonts work fine. I've also verified that the two fonts are installed, enabled, and can be used in other applications (e.g., MS Word). In fact, I can generate PDFs from MS Word documents on the same server that use both of those fonts. I suspect the errors are misleading in that those apps can find the fonts, but are unable to open or use them for some reason. I've been able to replicate this behavior both on Windows Server and Mac OS X.
Has anyone seen behavior like this? Any suggestions on how to get more information out of these Adobe apps to get a better idea what the real error is?
JJRAddirional note: This is a java class within a JavaFX application if that is relevant.
It does seem to be relevant - if I create the same class as part of a Java application rether than a JavaFX application it compiles without error. Is the imported java.awt.GraphicsEnvironment different in the tow cases??
Edited by: Sidereal on Aug 28, 2009 11:19 AM -
I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings" -
Jdbc scenario .. where to find the error msg
Hi,
I am working on a scenario,
abap proxy->jdbc adapter->MsSql server.
Whle testing,
i sent the payload xml from the sproxy test sceen.
After that, i checked the "Monitor for processed xml messages" screen (SXI_MONITOR).
There it shows the status "Processed successfully" for the message that i sent.
But when i checked the sqlserver database, the record is not inserted.
Where can i find, if anything gone wrong at Jdbc adapter, or there after.
Thanks in advance,
GaneshHi
apart from this communication channel you can see the message in adapter engine
to do this take the id of the message fromSXI_MONITOR
then go to transaction sxmb_ifr
inside this go to message Monitoring
under drop down select adapter engine and inside the window give the iD of your message which you have taken from MONI
if you are not getting the filter for message ID then click on additional filter and give the iD
after this you can see your message
select the radio butten inside your message and click on details
here you will get the log of each and every step which have been followed in processing the message and you can find the error exactly
regards
sandeep
If helpful reward points -
I have an iPad (original). I cannot complete the update to iOS 5. It gets to the "backup" stage and then finds an error (-402653081). It asks if I want to continue, with a warning that "continuing will result in the loss of all contents on this iPad." What can I do?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
Need help with class info and cannot find symbol error.
I having problems with a cannot find symbol error. I cant seem to figure it out.
I have about 12 of them in a program I am trying to do. I was wondering if anyone could help me out?
Here is some code I am working on:
// This will test the invoice class application.
// This program involves a hardware store's invoice.
//import java.util.*;
public class InvoiceTest
public static void main( String args[] )
Invoice invoice1 = new Invoice( "1234", "Hammer", 2, 14.95 );
// display invoice1
System.out.println("Original invoice information" );
System.out.println("Part number: ", invoice1.getPartNumber() );
System.out.println("Description: ", invoice1.getPartDescription() );
System.out.println("Quantity: ", invoice1.getQuantity() );
System.out.println("Price: ", invoice1.getPricePerItem() );
System.out.println("Invoice amount: ", invoice1.getInvoiceAmount() );
// change invoice1's data
invoice1.setPartNumber( "001234" );
invoice1.setPartDescription( "Yellow Hammer" );
invoice1.setQuantity( 3 );
invoice1.setPricePerItem( 19.49 );
// display invoice1 with new data
System.out.println("Updated invoice information" );
System.out.println("Part number: ", invoice1.getPartNumber() );
System.out.println("Description: ", invoice1.getPartDescription() );
System.out.println("Quantity: ", invoice1.getQuantity() );
System.out.println("Price: ", invoice1.getPricePerItem() );
System.out.println("Invoice amount: ", invoice1.getInvoiceAmount() );
and that uses this class file:
public class Invoice
private String partNumber;
private String partDescription;
private int quantityPurchased;
private double pricePerItem;
public Invoice( String ID, String desc, int purchased, double price )
partNumber = ID;
partDescription = desc;
if ( purchased >= 0 )
quantityPurchased = purchased;
if ( price > 0 )
pricePerItem = price;
public double getInvoiceAmount()
return quantityPurchased * pricePerItem;
public void setPartNumber( String newNumber )
partNumber = newNumber;
System.out.println(partDescription+" has changed to part "+newNumber);
public String getPartNumber()
return partNumber;
public void setDescription( String newDescription )
System.out.printf("%s now refers to %s, not %s.\n",
partNumber, newDescription, partDescription);
partDescription = newDescription;
public String getDescription()
return partDescription;
public void setPricePerItem( double newPrice )
if ( newPrice > 0 )
pricePerItem = newPrice;
public double getPricePerItem()
return pricePerItem;
Any tips for helping me out?System.out.println("Part number:
"+invoice1.getPartNumber;
The + sign will concatenate invoice1.getPartNumber()
after "Part number: " forming only one String.I added the plus sign and it gives me more errors:
C:\>javac InvoiceTest.java
InvoiceTest.java:16: operator + cannot be applied to java.lang.String
System.out.println("Part number: ", + invoice1.getPartNumber() );
^
InvoiceTest.java:17: cannot find symbol
symbol : method getPartDescription()
location: class Invoice
System.out.println("Description: ", + invoice1.getPartDescription() );
^
InvoiceTest.java:17: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
System.out.println("Description: ", + invoice1.getPartDescription() );
^
InvoiceTest.java:18: cannot find symbol
symbol : method getQuantity()
location: class Invoice
System.out.println("Quantity: ", + invoice1.getQuantity() );
^
InvoiceTest.java:18: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
System.out.println("Quantity: ", + invoice1.getQuantity() );
^
InvoiceTest.java:19: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
System.out.println("Price: ", + invoice1.getPricePerItem() );
^
InvoiceTest.java:20: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
System.out.println("Invoice amount: ", + invoice1.getInvoiceAmount() );
^
InvoiceTest.java:24: cannot find symbol
symbol : method setPartDescription(java.lang.String)
location: class Invoice
invoice1.setPartDescription( "Yellow Hammer" );
^
InvoiceTest.java:25: cannot find symbol
symbol : method setQuantity(int)
location: class Invoice
invoice1.setQuantity( 3 );
^
InvoiceTest.java:30: operator + cannot be applied to java.lang.String
System.out.println("Part number: ", + invoice1.getPartNumber() );
^
InvoiceTest.java:31: cannot find symbol
symbol : method getPartDescription()
location: class Invoice
System.out.println("Description: ", + invoice1.getPartDescription() );
^
InvoiceTest.java:31: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
System.out.println("Description: ", + invoice1.getPartDescription() );
^
InvoiceTest.java:32: cannot find symbol
symbol : method getQuantity()
location: class Invoice
System.out.println("Quantity: ", + invoice1.getQuantity() );
^
InvoiceTest.java:32: cannot find symbol
symbol : method println(java.lang.String,int)
location: class java.io.PrintStream
System.out.println("Quantity: ", + invoice1.getQuantity() );
^
InvoiceTest.java:33: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
System.out.println("Price: ", + invoice1.getPricePerItem() );
^
InvoiceTest.java:34: cannot find symbol
symbol : method println(java.lang.String,double)
location: class java.io.PrintStream
System.out.println("Invoice amount: ", + invoice1.getInvoiceAmount() );
^
16 errors -
"Finding occurrences" error when editing .mxml file in Flash Builder 4.6 Premium (Trial)
I am evaluating Flash Builder 4.6. Windows 7 Ultimate x64
I am trying to go through the Flex in a week training series but I am getting a lot of the "Finding occurrences" errors when editing the mxml files.
The error:
An internal error occurred during: "Finding occurrences".
java.lang.NullPointerException
This error occurs almost every time an xml tag is edited.
I can dismiss the error window that pops up by hitting 'Enter' and can continue editing the .mxml file but the error keeps repeating.
I was getting this error in the Day 1 set of exercises but after awhile the errors just stopped.
Now that I have imported the Day 2 starter projects, the error has started again but is occurring on almost every keystroke when editing an xml tag/element!.
Anyone have any ideas how to correct this issue?Ok, I seemed to have found a solution/workaround for the error.
After importing the Day 2 starter projects, I did not exit and restart Flash Builder. After exiting/restarting Flash Builder, I can now edit the .mxml files without the annoying "Finding occurrences" errors. -
Any option is there to find the error record in loop for huge amount of rec
Hi Guru's,
In our production system we got a error. While debugging we found one of our loop getting 1 lakh records. One of the record from the internal table having some wrong values because of that its giving a error message. But we are not getting any proper message.
Now our problem is its very difficult to debug all the records one by one. Even its not possible to give Watchpoint. bze in what situations its giving this error that also not predictable. So how to find the error record?
Kindly suggest.
AnanadhanNeed a lot more info.
To start with is this CR Designer or some other product?
I suspect it's classic SAP products like Business One etc., if so please mark as answered and post your question int the correct forum.
Thank you
Don -
I have opened the plugin scanning page many times before, and have done some updating of plugins recently, but yesterday I couldn't bring up the scan, I keep getting "Plugin Finding Service Error", which says to "try again later". I believe what I updated most recently was Flash (I think). No matter how many times I push the "try again", or shut down Firefox and the webpage, I still get the error, and get nowhere!
This problem has been occurring for the past two months. I have updated Firefox to version 3.6.16...including Flash Player to version 10.2.153.1 as instructed. I am able to click on the "Add-ons" tab and "find updates" for "Get Add-ons" and "Extensions." However, the "find updates" tab is not working for "Plugins."
I followed one of your suggestions in your "troubleshooting plugins" topic (disabling the plugins...then enabling them after a check). That didn't work either. In fact, a message box would appear saying that Firefox has "disabled Flash" instead, which of course it did not, since I was able to confirm that the Flash Player update version was still intact. Unfortunately, it appears that updating the Flash Player through Firefox is not a standalone operation. Apparently it will not work properly unless a separate update is subsequently processed through Internet Explorer as well.
Maybe you are looking for
-
Does any one have a solution to a blank disk not being read and unresponive to the eject button?
does any one have a solution to a blank disk not being read and unresponive to the eject button?
-
When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'. I'm not sure what to do, I did not recieve a cd with my mac to boot it up (I ordered it online). Also I can't find my harware serial numb
-
Webutil check if folder has write privilidges
We need to check if a file has write privileges before writing to it using the webutil transfer. I tried WebUtil_File.File_Is_Writable but it shows as TRUE even though it isn't. I know its not writeable as the same location then gives me a WUT-105 Un
-
HI, im getting IDoc from a Seeburger converter with UTF-8 text string. is it possible to convert this string or is sap possible to read/show utf-8 string correct ? we are using ECC6.0 unicode System. example: Kapitän should be shown as Kapitän Thank
-
Mac Mini mid-2010: List of Standard Resolutions?
Is there a list available anywhere that shows what the standard display resolutions that a mid-2010 Mac Mini will output are? I have had a look around on the Apple website, but can only find tech specs that mention the highest resolution of each port